tag	line	file	source code
serial_inp	380	drivers/char/serial.c	ch = serial_inp(info, UART_RX);
serial_inp	404	drivers/char/serial.c	*status = serial_inp(info, UART_LSR) & info->read_status_mask;
serial_inp	535	drivers/char/serial.c	status = serial_inp(info, UART_LSR) & info->read_status_mask;
serial_inp	590	drivers/char/serial.c	status = serial_inp(info, UART_LSR) & info->read_status_mask;
serial_inp	649	drivers/char/serial.c	status = serial_inp(info, UART_LSR) & info->read_status_mask;
serial_inp	918	drivers/char/serial.c	if (serial_inp(info, UART_LSR) == 0xff) {
serial_inp	959	drivers/char/serial.c	(void) serial_inp(info, UART_RX);
serial_inp	960	drivers/char/serial.c	(void) serial_inp(info, UART_IIR);
serial_inp	961	drivers/char/serial.c	(void) serial_inp(info, UART_MSR);
serial_inp	998	drivers/char/serial.c	(void)serial_inp(info, UART_LSR);
serial_inp	999	drivers/char/serial.c	(void)serial_inp(info, UART_RX);
serial_inp	1000	drivers/char/serial.c	(void)serial_inp(info, UART_IIR);
serial_inp	1001	drivers/char/serial.c	(void)serial_inp(info, UART_MSR);
serial_inp	1672	drivers/char/serial.c	serial_out(info, UART_LCR, serial_inp(info, UART_LCR) | UART_LCR_SBC);
serial_inp	1674	drivers/char/serial.c	serial_out(info, UART_LCR, serial_inp(info, UART_LCR) & ~UART_LCR_SBC);
serial_inp	2045	drivers/char/serial.c	while (!(serial_inp(info, UART_LSR) & UART_LSR_TEMT)) {
serial_inp	2188	drivers/char/serial.c	serial_inp(info, UART_MCR) |
serial_inp	2343	drivers/char/serial.c	save_IER = serial_inp(info, UART_IER);
serial_inp	2344	drivers/char/serial.c	save_MCR = serial_inp(info, UART_MCR);
serial_inp	2361	drivers/char/serial.c	(void)serial_inp(info, UART_LSR);
serial_inp	2362	drivers/char/serial.c	(void)serial_inp(info, UART_RX);
serial_inp	2363	drivers/char/serial.c	(void)serial_inp(info, UART_IIR);
serial_inp	2364	drivers/char/serial.c	(void)serial_inp(info, UART_MSR);
serial_inp	2448	drivers/char/serial.c	scratch = serial_inp(info, UART_IER);
serial_inp	2451	drivers/char/serial.c	scratch2 = serial_inp(info, UART_IER);
serial_inp	2468	drivers/char/serial.c	scratch = serial_inp(info, UART_MCR);
serial_inp	2470	drivers/char/serial.c	scratch2 = serial_inp(info, UART_MSR);
serial_inp	2472	drivers/char/serial.c	status1 = serial_inp(info, UART_MSR) & 0xF0;