tag	line	file	source code
PORT	112	drivers/net/ni65.c	#define writereg(val,reg) {outw(reg,PORT+L_ADDRREG);inw(PORT+L_ADDRREG); \
PORT	113	drivers/net/ni65.c	outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
PORT	114	drivers/net/ni65.c	#define readreg(reg) (outw(reg,PORT+L_ADDRREG),inw(PORT+L_ADDRREG),\
PORT	115	drivers/net/ni65.c	inw(PORT+L_DATAREG))
PORT	116	drivers/net/ni65.c	#define writedatareg(val) {outw(val,PORT+L_DATAREG);inw(PORT+L_DATAREG);}
PORT	174	drivers/net/ni65.c	outw(0,PORT+L_RESET); /* that's the hard way */
PORT	241	drivers/net/ni65.c	dev->dev_addr[i] = inb(PORT+L_EBASE+i);
PORT	244	drivers/net/ni65.c	dev->irq = irqtab[(inw(PORT+L_CONFIG)>>2)&3];
PORT	246	drivers/net/ni65.c	dev->dma = dmatab[inw(PORT+L_CONFIG)&3];
PORT	364	drivers/net/ni65.c	outw(0,PORT+L_RESET); /* first: reset the card */
PORT	365	drivers/net/ni65.c	if(inw(PORT+L_DATAREG) != 0x4)
PORT	367	drivers/net/ni65.c	printk(KERN_ERR "%s: can't RESET ni6510 card: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
PORT	434	drivers/net/ni65.c	if(inw(PORT+L_DATAREG) & CSR0_IDON)
PORT	439	drivers/net/ni65.c	printk(KERN_ERR "%s: can't init am7990/lance, status: %04x\n",dev->name,(int) inw(PORT+L_DATAREG));
PORT	469	drivers/net/ni65.c	csr0 = inw(PORT+L_DATAREG);
PORT	607	drivers/net/ni65.c	dev->name,(int) rmdstat,csr0,(int) inw(PORT+L_DATAREG) );
PORT	322	drivers/scsi/aha152x.h	#define SETPORT(PORT, VAL)  \
PORT	323	drivers/scsi/aha152x.h	outb( (VAL), (PORT) )
PORT	325	drivers/scsi/aha152x.h	#define SETPORTP(PORT, VAL)  \
PORT	326	drivers/scsi/aha152x.h	outb_p( (VAL), (PORT) )
PORT	328	drivers/scsi/aha152x.h	#define SETPORTW(PORT, VAL)  \
PORT	329	drivers/scsi/aha152x.h	outw( (VAL), (PORT) )
PORT	331	drivers/scsi/aha152x.h	#define GETPORT(PORT)  \
PORT	332	drivers/scsi/aha152x.h	inb( PORT )
PORT	334	drivers/scsi/aha152x.h	#define GETPORTW(PORT)  \
PORT	335	drivers/scsi/aha152x.h	inw( PORT )
PORT	337	drivers/scsi/aha152x.h	#define SETBITS(PORT, BITS)  \
PORT	338	drivers/scsi/aha152x.h	outb( (inb(PORT) | (BITS)), (PORT) )
PORT	340	drivers/scsi/aha152x.h	#define CLRBITS(PORT, BITS)  \
PORT	341	drivers/scsi/aha152x.h	outb( (inb(PORT) & ~(BITS)), (PORT) )
PORT	343	drivers/scsi/aha152x.h	#define CLRSETBITS(PORT, CLR, SET)  \
PORT	344	drivers/scsi/aha152x.h	outb( (inb(PORT) & ~(CLR)) | (SET) , (PORT) )
PORT	346	drivers/scsi/aha152x.h	#define TESTHI(PORT, BITS)  \
PORT	347	drivers/scsi/aha152x.h	((inb(PORT) & (BITS)) == BITS)
PORT	349	drivers/scsi/aha152x.h	#define TESTLO(PORT, BITS)  \
PORT	350	drivers/scsi/aha152x.h	((inb(PORT) & (BITS)) == 0)
PORT	136	drivers/sound/sscape.c	outb (reg, PORT (ODIE_ADDR));
PORT	137	drivers/sound/sscape.c	val = inb (PORT (ODIE_DATA));
PORT	149	drivers/sound/sscape.c	outb (reg, PORT (ODIE_ADDR));
PORT	150	drivers/sound/sscape.c	outb (data, PORT (ODIE_DATA));
PORT	157	drivers/sound/sscape.c	outb (0x00, PORT (HOST_CTRL));  /* Put the board to the host mode */
PORT	163	drivers/sound/sscape.c	outb (0x03, PORT (HOST_CTRL));  /* Put the board to the MIDI mode */
PORT	182	drivers/sound/sscape.c	if (inb (PORT (HOST_CTRL)) & TX_READY)
PORT	191	drivers/sound/sscape.c	outb (data[i], PORT (HOST_DATA));
PORT	215	drivers/sound/sscape.c	if (inb (PORT (HOST_CTRL)) & RX_READY)
PORT	224	drivers/sound/sscape.c	data = inb (PORT (HOST_DATA));
PORT	534	drivers/sound/sscape.c	outb (0x00, PORT (HOST_CTRL));
PORT	535	drivers/sound/sscape.c	outb (0x00, PORT (MIDI_CTRL));
PORT	568	drivers/sound/sscape.c	if (inb (PORT (HOST_DATA)) == 0xff)  /* OBP startup acknowledge */
PORT	601	drivers/sound/sscape.c	if (inb (PORT (HOST_DATA)) == 0xfe)  /* Host startup acknowledge */
PORT	1031	drivers/sound/sscape.c	if ((save = inb (PORT (ODIE_ADDR))) & 0xf0)
PORT	1034	drivers/sound/sscape.c	outb (0x00, PORT (ODIE_ADDR));
PORT	1035	drivers/sound/sscape.c	if (inb (PORT (ODIE_ADDR)) != 0x00)
PORT	1038	drivers/sound/sscape.c	outb (0xff, PORT (ODIE_ADDR));
PORT	1039	drivers/sound/sscape.c	if (inb (PORT (ODIE_ADDR)) != 0x0f)
PORT	1042	drivers/sound/sscape.c	outb (save, PORT (ODIE_ADDR));