tag | line | file | source code |
P | 166 | drivers/scsi/constants.c | {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, |
P | 179 | drivers/scsi/constants.c | {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"}, |
P | 190 | drivers/scsi/constants.c | {0x04,0x00,D|T|L|P|W|R|S|O|M|C, |
P | 192 | drivers/scsi/constants.c | {0x04,0x01,D|T|L|P|W|R|S|O|M|C, |
P | 194 | drivers/scsi/constants.c | {0x04,0x02,D|T|L|P|W|R|S|O|M|C, |
P | 196 | drivers/scsi/constants.c | {0x04,0x03,D|T|L|P|W|R|S|O|M|C, |
P | 209 | drivers/scsi/constants.c | {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"}, |
P | 256 | drivers/scsi/constants.c | {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"}, |
P | 257 | drivers/scsi/constants.c | {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"}, |
P | 263 | drivers/scsi/constants.c | {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"}, |
P | 267 | drivers/scsi/constants.c | {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"}, |
P | 268 | drivers/scsi/constants.c | {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"}, |
P | 269 | drivers/scsi/constants.c | {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"}, |
P | 270 | drivers/scsi/constants.c | {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"}, |
P | 271 | drivers/scsi/constants.c | {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"}, |
P | 272 | drivers/scsi/constants.c | {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"}, |
P | 274 | drivers/scsi/constants.c | {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"}, |
P | 276 | drivers/scsi/constants.c | {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"}, |
P | 280 | drivers/scsi/constants.c | {0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"}, |
P | 281 | drivers/scsi/constants.c | {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"}, |
P | 285 | drivers/scsi/constants.c | {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"}, |
P | 314 | drivers/scsi/constants.c | {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"}, |
P | 315 | drivers/scsi/constants.c | {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"}, |
P | 316 | drivers/scsi/constants.c | {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"}, |
P | 317 | drivers/scsi/constants.c | {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"}, |
P | 318 | drivers/scsi/constants.c | {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"}, |
P | 319 | drivers/scsi/constants.c | {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"}, |
P | 320 | drivers/scsi/constants.c | {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"}, |
P | 321 | drivers/scsi/constants.c | {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"}, |
P | 322 | drivers/scsi/constants.c | {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"}, |
P | 323 | drivers/scsi/constants.c | {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"}, |
P | 324 | drivers/scsi/constants.c | {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"}, |
P | 325 | drivers/scsi/constants.c | {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"}, |
P | 326 | drivers/scsi/constants.c | {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"}, |
P | 327 | drivers/scsi/constants.c | {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"}, |
P | 328 | drivers/scsi/constants.c | {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"}, |
P | 329 | drivers/scsi/constants.c | {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"}, |
P | 330 | drivers/scsi/constants.c | {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"}, |
P | 339 | drivers/scsi/constants.c | {0x54,0x00,P,"Scsi to host system interface failure"}, |
P | 340 | drivers/scsi/constants.c | {0x55,0x00,P,"System resource failure"}, |
P | 344 | drivers/scsi/constants.c | {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"}, |
P | 348 | drivers/scsi/constants.c | {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"}, |
P | 349 | drivers/scsi/constants.c | {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"}, |
P | 350 | drivers/scsi/constants.c | {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"}, |
P | 351 | drivers/scsi/constants.c | {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"}, |