taglinefilesource code
outb40include/linux/mouse.h#define MSE_INT_OFF()  outb(MSE_DISABLE_INTERRUPTS, MSE_CONTROL_PORT)
outb41include/linux/mouse.h#define MSE_INT_ON()  outb(MSE_ENABLE_INTERRUPTS, MSE_CONTROL_PORT)
outb411kernel/blk_drv/floppy.coutb(byte,FD_DATA);
outb786kernel/blk_drv/floppy.coutb(current_DOR,FD_DOR);
outb873kernel/blk_drv/floppy.coutb(current_DOR,FD_DOR);
outb1219kernel/blk_drv/floppy.coutb(current_DOR,FD_DOR);
outb177kernel/blk_drv/hd.coutb(4,HD_CMD);
outb179kernel/blk_drv/hd.coutb(hd_info[0].ctl & 0x0f ,HD_CMD);
outb46kernel/blk_drv/scsi/7000fasst.c#define wd7000fasst_intr_reset()  outb(0,INTR_ACK)
outb52kernel/blk_drv/scsi/7000fasst.coutb(controlstat,CONTROL);\
outb53kernel/blk_drv/scsi/7000fasst.coutb((inb((intr_chan<=7)?PC_IMR:AT_IMR))& ~0xff,(intr_chan<=7)?PC_IMR:AT_IMR);}
outb55kernel/blk_drv/scsi/7000fasst.c#define wd7000fasst_disable_intr() outb(controlstat |= INT_EN, CONTROL)
outb58kernel/blk_drv/scsi/7000fasst.coutb(controlstat,CONTROL);\
outb59kernel/blk_drv/scsi/7000fasst.coutb((DMA_CH|CASCADE),DMA_MODE_REG);\
outb60kernel/blk_drv/scsi/7000fasst.coutb(DMA_CH,DMA_MASK_REG);}
outb63kernel/blk_drv/scsi/7000fasst.coutb(DMA_CH|S_DMA_MASK,DMA_MASK_REG);\
outb65kernel/blk_drv/scsi/7000fasst.coutb(controlstat,CONTROL);}
outb90kernel/blk_drv/scsi/7000fasst.coutb(*cmdp++, COMMAND);
outb150kernel/blk_drv/scsi/7000fasst.coutb(SCSI_RES|ASC_RES, CONTROL);
outb154kernel/blk_drv/scsi/7000fasst.coutb(0,CONTROL);
outb174kernel/blk_drv/scsi/7000fasst.coutb(2,COMMAND);
outb324kernel/blk_drv/scsi/7000fasst.coutb(0x80+i,COMMAND);
outb41kernel/blk_drv/scsi/aha1542.c#define aha1542_intr_reset()  outb(IRST, CONTROL)
outb42kernel/blk_drv/scsi/aha1542.c#define aha1542_enable_intr() outb(inb_p(0xA1) & ~8, 0xA1)
outb43kernel/blk_drv/scsi/aha1542.c#define aha1542_disable_intr() outb(inb_p(0xA1) | 8, 0xA1)
outb67kernel/blk_drv/scsi/aha1542.coutb(*cmdp++, DATA);
outb138kernel/blk_drv/scsi/aha1542.coutb(SRST|IRST/*|SCRST*/, CONTROL);
outb150kernel/blk_drv/scsi/aha1542.coutb(CMD_ECHO, DATA);
outb158kernel/blk_drv/scsi/aha1542.coutb(42, DATA);
outb179kernel/blk_drv/scsi/aha1542.coutb(IRST, CONTROL);
outb399kernel/blk_drv/scsi/aha1542.coutb(inb_p(0x21)&0xfb,0x21);    /* open for slave ?? */
outb250kernel/blk_drv/scsi/fdomain.coutb( 0, SCSI_Cntl_port );
outb251kernel/blk_drv/scsi/fdomain.coutb( 0, Data_Mode_Cntl_port );
outb252kernel/blk_drv/scsi/fdomain.coutb( 1, TMC_Cntl_port );
outb302kernel/blk_drv/scsi/fdomain.coutb( i, port_base + Write_Loopback );
outb316kernel/blk_drv/scsi/fdomain.coutb( inb_p( 0x21 ) & ~(1 << interrupt_level), 0x21 );
outb320kernel/blk_drv/scsi/fdomain.coutb( inb_p( 0xa1 ) & ~(1 << (interrupt_level - 8)), 0xa1 );
outb330kernel/blk_drv/scsi/fdomain.coutb( inb_p( 0x21 ) | (1 << interrupt_level), 0x21 );
outb334kernel/blk_drv/scsi/fdomain.coutb( inb_p( 0xa1 ) | (1 << (interrupt_level - 8)), 0xa1 );
outb565kernel/blk_drv/scsi/fdomain.coutb( 0x00, SCSI_Cntl_port );              /* Disable data drivers */
outb566kernel/blk_drv/scsi/fdomain.coutb( 0x40, port_base + SCSI_Data_NoACK ); /* Set our id bit */
outb567kernel/blk_drv/scsi/fdomain.coutb( 0x04, TMC_Cntl_port );                /* Start arbitration */
outb592kernel/blk_drv/scsi/fdomain.coutb( 0x80, SCSI_Cntl_port );  /* Bus Enable */
outb593kernel/blk_drv/scsi/fdomain.coutb( 0x8a, SCSI_Cntl_port );  /* Bus Enable + Attention + Select */
outb597kernel/blk_drv/scsi/fdomain.coutb( 0x40 | (1 << target), port_base + SCSI_Data_NoACK );
outb599kernel/blk_drv/scsi/fdomain.coutb( (1 << target), port_base + SCSI_Data_NoACK );
outb603kernel/blk_drv/scsi/fdomain.coutb( 0xc8, TMC_Cntl_port ); 
outb612kernel/blk_drv/scsi/fdomain.coutb( 0x88, SCSI_Cntl_port );
outb614kernel/blk_drv/scsi/fdomain.coutb( 0x80, SCSI_Cntl_port );
outb641kernel/blk_drv/scsi/fdomain.coutb( 0x00, Interrupt_Cntl_port );
outb669kernel/blk_drv/scsi/fdomain.coutb( 0x00, Interrupt_Cntl_port );
outb710kernel/blk_drv/scsi/fdomain.coutb( 0x80, SCSI_Cntl_port );  /* Bus Enable */
outb711kernel/blk_drv/scsi/fdomain.coutb( 0x8a, SCSI_Cntl_port );  /* Bus Enable + Attention + Select */
outb713kernel/blk_drv/scsi/fdomain.coutb( (1 << current_target), port_base + SCSI_Data_NoACK );
outb715kernel/blk_drv/scsi/fdomain.coutb( 0x40, Interrupt_Cntl_port );
outb718kernel/blk_drv/scsi/fdomain.coutb( 0xd8, TMC_Cntl_port );
outb737kernel/blk_drv/scsi/fdomain.coutb( 0xc0, Data_Mode_Cntl_port );
outb740kernel/blk_drv/scsi/fdomain.coutb( 0x90, Interrupt_Cntl_port );
outb741kernel/blk_drv/scsi/fdomain.coutb( 0x80, SCSI_Cntl_port );
outb762kernel/blk_drv/scsi/fdomain.coutb( *out_buf_pt++, Write_FIFO_port );
outb774kernel/blk_drv/scsi/fdomain.coutb( 0x98, TMC_Cntl_port );
outb801kernel/blk_drv/scsi/fdomain.coutb( *cmd_pt++, Write_SCSI_Data_port );
outb822kernel/blk_drv/scsi/fdomain.coutb( 0x80, SCSI_Cntl_port );          /* Lower ATN */
outb823kernel/blk_drv/scsi/fdomain.coutb( 0x80, Write_SCSI_Data_port );    /* Identify */
outb827kernel/blk_drv/scsi/fdomain.coutb( 0x07, Write_SCSI_Data_port ); /* Reject */
outb875kernel/blk_drv/scsi/fdomain.coutb( 0x90, Interrupt_Cntl_port );
outb916kernel/blk_drv/scsi/fdomain.coutb( 0x00, Interrupt_Cntl_port );
outb917kernel/blk_drv/scsi/fdomain.coutb( 0x00, SCSI_Cntl_port );              /* Disable data drivers */
outb918kernel/blk_drv/scsi/fdomain.coutb( 0x40, port_base + SCSI_Data_NoACK ); /* Set our id bit */
outb920kernel/blk_drv/scsi/fdomain.coutb( 0x20, Interrupt_Cntl_port );
outb921kernel/blk_drv/scsi/fdomain.coutb( 0x1c, TMC_Cntl_port );                /* Start arbitration */
outb972kernel/blk_drv/scsi/fdomain.coutb( 0xc0, Data_Mode_Cntl_port );
outb983kernel/blk_drv/scsi/fdomain.coutb( *out_buf_pt++, Write_FIFO_port );
outb993kernel/blk_drv/scsi/fdomain.coutb( 0x88, TMC_Cntl_port );
outb1011kernel/blk_drv/scsi/fdomain.coutb( *out_buf_pt++, Write_FIFO_port );
outb1020kernel/blk_drv/scsi/fdomain.coutb( *out_buf_pt++, Write_SCSI_Data_port );
outb1026kernel/blk_drv/scsi/fdomain.coutb( 0x88, TMC_Cntl_port );
outb1042kernel/blk_drv/scsi/fdomain.coutb( *cmd_pt++, Write_SCSI_Data_port );
outb1063kernel/blk_drv/scsi/fdomain.coutb( 0x80, SCSI_Cntl_port );          /* Lower ATN */
outb1064kernel/blk_drv/scsi/fdomain.coutb( 0x80, Write_SCSI_Data_port );    /* Identify */
outb1068kernel/blk_drv/scsi/fdomain.coutb( 0x07, Write_SCSI_Data_port ); /* Reject */
outb1165kernel/blk_drv/scsi/fdomain.coutb( 1, SCSI_Cntl_port );
outb1167kernel/blk_drv/scsi/fdomain.coutb( 0, SCSI_Cntl_port );
outb1169kernel/blk_drv/scsi/fdomain.coutb( 0, Data_Mode_Cntl_port );
outb1170kernel/blk_drv/scsi/fdomain.coutb( 0, TMC_Cntl_port );
outb299kernel/blk_drv/scsi/ultrastor.coutb(inb_p(0xA1) & ~BIT(config.interrupt - 8), 0xA1);
outb1427kernel/chr_drv/console.coutb(inb_p(0x61)&0xFC, 0x61);
outb1438kernel/chr_drv/console.coutb(0x06, 0x42);
outb76kernel/chr_drv/keyboard.coutb(0x20, 0x20);
outb224kernel/chr_drv/keyboard.coutb(0xed, 0x60);  /* set leds command */
outb227kernel/chr_drv/keyboard.coutb(kleds, 0x60);
outb1235kernel/chr_drv/keyboard.coutb(0xfe,0x64);   /* pulse reset low */
outb19kernel/chr_drv/lp.coutb(0, LP_B(minor)+2);
outb22kernel/chr_drv/lp.coutb(LP_PSELECP | LP_PINITP, LP_B(minor)+2);
outb31kernel/chr_drv/lp.coutb(lpchar, LP_B(minor));
outb42kernel/chr_drv/lp.coutb(( LP_PSELECP | LP_PINITP | LP_PSTROBE ), ( LP_B( minor ) + 2 ));
outb44kernel/chr_drv/lp.coutb(( LP_PSELECP | LP_PINITP ), ( LP_B( minor ) + 2 ));
outb134kernel/chr_drv/lp.coutb( LP_DUMMY, LP_B(offset));
outb159kernel/chr_drv/mem.coutb(get_fs_byte(tmp),i);
outb39kernel/chr_drv/mouse.coutb(MSE_READ_X_LOW, MSE_CONTROL_PORT);
outb42kernel/chr_drv/mouse.coutb(MSE_READ_X_HIGH, MSE_CONTROL_PORT);
outb45kernel/chr_drv/mouse.coutb(MSE_READ_Y_LOW, MSE_CONTROL_PORT );
outb48kernel/chr_drv/mouse.coutb(MSE_READ_Y_HIGH, MSE_CONTROL_PORT);
outb160kernel/chr_drv/mouse.coutb(MSE_CONFIG_BYTE, MSE_CONFIG_PORT);
outb161kernel/chr_drv/mouse.coutb(MSE_SIGNATURE_BYTE, MSE_SIGNATURE_PORT);
outb170kernel/chr_drv/mouse.coutb(MSE_DEFAULT_MODE, MSE_CONFIG_PORT);
outb78kernel/chr_drv/serial.coutb(c,port);
outb295kernel/chr_drv/serial.coutb(0x00,info->port+4);  /* reset DTR, RTS, */
outb341kernel/chr_drv/serial.coutb(0x00,port+4);
outb355kernel/chr_drv/serial.coutb(cval,port+3);    /* reset DLAB */
outb438kernel/chr_drv/serial.coutb(0x00,info->port+4);  /* reset DTR, RTS, */
outb51kernel/chr_drv/vt.coutb(inb_p(0x61)&0xFC, 0x61);
outb60kernel/chr_drv/vt.coutb((freq >> 8) & 0xff, 0x42);
outb163kernel/irq.coutb(inb_p(0x21) & ~(1<<irq),0x21);
outb165kernel/irq.coutb(inb_p(0x21) & ~(1<<2),0x21);
outb166kernel/irq.coutb(inb_p(0xA1) & ~(1<<(irq-8)),0xA1);
outb198kernel/irq.coutb(inb_p(0x21) | (1<<irq),0x21);
outb200kernel/irq.coutb(inb_p(0xA1) | (1<<(irq-8)),0xA1);
outb213kernel/irq.coutb(0,0xF0);
outb276kernel/sched.coutb(mask,FD_DOR);
outb305kernel/sched.coutb(current_DOR,FD_DOR);
outb532kernel/sched.coutb(LATCH >> 8 , 0x40);  /* MSB */