# # ROOT_DEV specifies the default root-device when making the image. # This can be either FLOPPY, /dev/xxxx or empty, in which case the # default of FLOPPY is used by 'build'. # ROOT_DEV = /dev/hdb1 # # uncomment this if you want kernel profiling: the profile_shift is the # granularity of the profiling (5 = 32-byte granularity) # PROFILING =# -DPROFILE_SHIFT=2 # # uncomment the correct keyboard: # # The value of KBDFLAGS should be or'ed together from the following # bits, depending on which features you want enabled. # 0x80 - Off: the Alt key will set bit 7 if pressed together with # another key. # On: the Alt key will NOT set the high bit; an escape # character is prepended instead. # The least significant bits control if the following keys are "dead". # The key is dead by default if the bit is on. # 0x01 - backquote (`) # 0x02 - accent acute # 0x04 - circumflex (^) # 0x08 - tilde (~) # 0x10 - dieresis (umlaut) KEYBOARD = -DKBD_FINNISH -DKBDFLAGS=0 # KEYBOARD = -DKBD_FINNISH_LATIN1 -DKBDFLAGS=0x9F # KEYBOARD = -DKBD_US -DKBDFLAGS=0 # KEYBOARD = -DKBD_GR -DKBDFLAGS=0 # KEYBOARD = -DKBD_GR_LATIN1 -DKBDFLAGS=0x9F # KEYBOARD = -DKBD_FR -DKBDFLAGS=0 # KEYBOARD = -DKBD_FR_LATIN1 -DKBDFLAGS=0x9F # KEYBOARD = -DKBD_UK -DKBDFLAGS=0 # KEYBOARD = -DKBD_DK -DKBDFLAGS=0 # KEYBOARD = -DKBD_DK_LATIN1 -DKBDFLAGS=0x9F # KEYBOARD = -DKBD_DVORAK -DKBDFLAGS=0 # KEYBOARD = -DKBD_SG -DKBDFLAGS=0 # KEYBOARD = -DKBD_SG_LATIN1 -DKBDFLAGS=0x9F # KEYBOARD = -DKBD_SF -DKBDFLAGS=0 # KEYBOARD = -DKBD_SF_LATIN1 -DKBDFLAGS=0x9F # KEYBOARD = -DKBD_NO -DKBDFLAGS=0 # # comment this line if you don't want the emulation-code # MATH_EMULATION = -DKERNEL_MATH_EMULATION # # Comment out this line if you don't want the 16MB kernel limit - but # note that some of the SCSI drivers may have problems with anything # else due to DMA limits. The drivers should check, but they don't. # # EVEN IF YOU HAVE > 16MB, YOU SHOULD EDIT THIS ONLY IF YOU ARE 100% # SURE YOU AREN'T USING ANY DEVICE THAT DOES UNCHECKED DMA!! THE # FLOPPY DRIVER IS OK, BUT OTHERS MIGHT HAVE PROBLEMS. # LIMIT_MEMORY = -DMAX_16M # # If you want to preset the SVGA mode, uncomment the next line and # set SVGA_MODE to whatever number you want. # Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode. # The number is the same as you would ordinarily press at bootup. # SVGA_MODE= -DSVGA_MODE=1 # # standard CFLAGS # CFLAGS = -Wall -O6 -fomit-frame-pointer $(LIMIT_MEMORY) # # if you want the ram-disk device, define this to be the # size in blocks. # #RAMDISK = -DRAMDISK=512 AS86 =as86 -0 -a LD86 =ld86 -0 AS =as LD =ld HOSTCC =gcc CC =gcc -DKERNEL MAKE =make CPP =$(CC) -E $(LIMIT_MEMORY) AR =ar ARCHIVES =kernel/kernel.o mm/mm.o fs/fs.o net/net.o FILESYSTEMS =fs/filesystems.a DRIVERS =kernel/blk_drv/blk_drv.a kernel/chr_drv/chr_drv.a \ kernel/blk_drv/scsi/scsi.a MATH =kernel/FPU-emu/math.a LIBS =lib/lib.a SUBDIRS =kernel mm fs net lib KERNELHDRS =/usr/src/linux/include .c.s: $(CC) $(CFLAGS) -S -o $*.s $< .s.o: $(AS) -c -o $*.o $< .c.o: $(CC) $(CFLAGS) -c -o $*.o $< all: Version Image lilo: Image if [ -f /vmlinux ]; then mv /vmlinux /vmlinux.old; fi cat Image > /vmlinux /etc/lilo/install linuxsubdirs: dummy @for i in $(SUBDIRS); do (cd $$i && echo $$i && $(MAKE)) || exit; done Version: @./makever.sh @echo \#define UTS_RELEASE \"0.98.pl6-`cat .version`\" > tools/version.h @echo \#define UTS_VERSION \"`date +%D`\" >> tools/version.h @echo \#define LINUX_COMPILE_TIME \"`date +%T`\" >> tools/version.h @echo \#define LINUX_COMPILE_BY \"`whoami`\" >> tools/version.h @echo \#define LINUX_COMPILE_HOST \"`hostname`\" >> tools/version.h Image: boot/bootsect boot/setup tools/system tools/build cp tools/system system.tmp strip system.tmp tools/build boot/bootsect boot/setup system.tmp $(ROOT_DEV) > Image rm system.tmp sync disk: Image dd bs=8192 if=Image of=/dev/fd0 tools/build: tools/build.c $(HOSTCC) $(CFLAGS) \ -o tools/build tools/build.c boot/head.o: boot/head.s boot/head.s: boot/head.S $(CPP) -traditional boot/head.S -o boot/head.s tools/version.o: tools/version.c tools/version.h init/main.o: init/main.c $(CC) $(CFLAGS) $(PROFILING) -c -o $*.o $< tools/system: boot/head.o init/main.o tools/version.o linuxsubdirs $(LD) $(LDFLAGS) -M boot/head.o init/main.o tools/version.o \ $(ARCHIVES) \ $(FILESYSTEMS) \ $(DRIVERS) \ $(MATH) \ $(LIBS) \ -o tools/system > System.map boot/setup: boot/setup.s $(AS86) -o boot/setup.o boot/setup.s $(LD86) -s -o boot/setup boot/setup.o boot/setup.s: boot/setup.S include/linux/config.h $(CPP) -traditional boot/setup.S -o boot/setup.s boot/bootsect.s: boot/bootsect.S include/linux/config.h Makefile $(CPP) -traditional $(SVGA_MODE) $(RAMDISK) boot/bootsect.S -o boot/bootsect.s boot/bootsect: boot/bootsect.s $(AS86) -o boot/bootsect.o boot/bootsect.s $(LD86) -s -o boot/bootsect boot/bootsect.o fs: dummy $(MAKE) linuxsubdirs SUBDIRS=fs mm: dummy $(MAKE) linuxsubdirs SUBDIRS=mm kernel: dummy $(MAKE) linuxsubdirs SUBDIRS=kernel clean: rm -f Image System.map tmp_make core boot/bootsect boot/setup \ boot/bootsect.s boot/setup.s boot/head.s init/main.s rm -f init/*.o tools/system tools/build boot/*.o tools/*.o for i in $(SUBDIRS); do (cd $$i && $(MAKE) clean); done backup: clean cd .. && tar cf - linux | compress - > backup.Z sync depend dep: sed '/\#\#\# Dependencies/q' < Makefile > tmp_make for i in init/*.c;do echo -n "init/";$(CPP) -M $$i;done >> tmp_make cp tmp_make Makefile for i in $(SUBDIRS); do (cd $$i && $(MAKE) dep) || exit; done dummy: ### Dependencies: init/main.o : init/main.c /usr/lib/gcc-lib/i386-linux/2.3.2/include/stdarg.h /usr/include/asm/system.h \ /usr/include/asm/io.h /usr/include/linux/mktime.h /usr/include/linux/types.h \ /usr/include/linux/fcntl.h /usr/include/linux/config.h /usr/include/linux/config.dist.h \ /usr/include/linux/sched.h /usr/include/linux/head.h /usr/include/linux/fs.h \ /usr/include/linux/limits.h /usr/include/linux/wait.h /usr/include/linux/dirent.h \ /usr/include/linux/vfs.h /usr/include/linux/pipe_fs_i.h /usr/include/linux/minix_fs_i.h \ /usr/include/linux/ext_fs_i.h /usr/include/linux/msdos_fs_i.h /usr/include/linux/iso_fs_i.h \ /usr/include/linux/minix_fs_sb.h /usr/include/linux/ext_fs_sb.h /usr/include/linux/msdos_fs_sb.h \ /usr/include/linux/iso_fs_sb.h /usr/include/linux/mm.h /usr/include/linux/kernel.h \ /usr/include/linux/signal.h /usr/include/linux/time.h /usr/include/linux/param.h \ /usr/include/linux/resource.h /usr/include/linux/vm86.h /usr/include/linux/math_emu.h \ /usr/include/linux/tty.h /usr/include/linux/termios.h /usr/include/linux/unistd.h \ /usr/include/linux/string.h