| tag | line | file | source code |
|---|
| M | 150 | drivers/scsi/constants.c | {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, |
| M | 163 | drivers/scsi/constants.c | {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"}, |
| M | 170 | drivers/scsi/constants.c | {0x02,0x00,D|W|R|O|M,"No seek complete"}, |
| M | 174 | drivers/scsi/constants.c | {0x04,0x00,D|T|L|P|W|R|S|O|M|C, |
| M | 176 | drivers/scsi/constants.c | {0x04,0x01,D|T|L|P|W|R|S|O|M|C, |
| M | 178 | drivers/scsi/constants.c | {0x04,0x02,D|T|L|P|W|R|S|O|M|C, |
| M | 180 | drivers/scsi/constants.c | {0x04,0x03,D|T|L|P|W|R|S|O|M|C, |
| M | 183 | drivers/scsi/constants.c | {0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"}, |
| M | 184 | drivers/scsi/constants.c | {0x06,0x00,D|W|R|O|M,"No reference position found"}, |
| M | 185 | drivers/scsi/constants.c | {0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"}, |
| M | 186 | drivers/scsi/constants.c | {0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"}, |
| M | 187 | drivers/scsi/constants.c | {0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"}, |
| M | 188 | drivers/scsi/constants.c | {0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"}, |
| M | 193 | drivers/scsi/constants.c | {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"}, |
| M | 218 | drivers/scsi/constants.c | {0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"}, |
| M | 219 | drivers/scsi/constants.c | {0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"}, |
| M | 240 | drivers/scsi/constants.c | {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"}, |
| M | 241 | drivers/scsi/constants.c | {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"}, |
| M | 247 | drivers/scsi/constants.c | {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"}, |
| M | 248 | drivers/scsi/constants.c | {0x21,0x00,D|T|W|R|O|M,"Logical block address out of range"}, |
| M | 249 | drivers/scsi/constants.c | {0x21,0x01,M,"Invalid element address"}, |
| M | 251 | drivers/scsi/constants.c | {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"}, |
| M | 252 | drivers/scsi/constants.c | {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"}, |
| M | 253 | drivers/scsi/constants.c | {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"}, |
| M | 254 | drivers/scsi/constants.c | {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"}, |
| M | 255 | drivers/scsi/constants.c | {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"}, |
| M | 256 | drivers/scsi/constants.c | {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"}, |
| M | 258 | drivers/scsi/constants.c | {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"}, |
| M | 259 | drivers/scsi/constants.c | {0x28,0x01,M,"Import or export element accessed"}, |
| M | 260 | drivers/scsi/constants.c | {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"}, |
| M | 261 | drivers/scsi/constants.c | {0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"}, |
| M | 262 | drivers/scsi/constants.c | {0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"}, |
| M | 263 | drivers/scsi/constants.c | {0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"}, |
| M | 265 | drivers/scsi/constants.c | {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"}, |
| M | 269 | drivers/scsi/constants.c | {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"}, |
| M | 270 | drivers/scsi/constants.c | {0x30,0x00,D|T|W|R|O|M,"Incompatible medium installed"}, |
| M | 280 | drivers/scsi/constants.c | {0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"}, |
| M | 281 | drivers/scsi/constants.c | {0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"}, |
| M | 282 | drivers/scsi/constants.c | {0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"}, |
| M | 296 | drivers/scsi/constants.c | {0x3B,0x0D,M,"Medium destination element full"}, |
| M | 297 | drivers/scsi/constants.c | {0x3B,0x0E,M,"Medium source element empty"}, |
| M | 298 | drivers/scsi/constants.c | {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"}, |
| M | 299 | drivers/scsi/constants.c | {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"}, |
| M | 300 | drivers/scsi/constants.c | {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"}, |
| M | 301 | drivers/scsi/constants.c | {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"}, |
| M | 302 | drivers/scsi/constants.c | {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"}, |
| M | 303 | drivers/scsi/constants.c | {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"}, |
| M | 304 | drivers/scsi/constants.c | {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"}, |
| M | 305 | drivers/scsi/constants.c | {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"}, |
| M | 306 | drivers/scsi/constants.c | {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"}, |
| M | 307 | drivers/scsi/constants.c | {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"}, |
| M | 308 | drivers/scsi/constants.c | {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"}, |
| M | 309 | drivers/scsi/constants.c | {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"}, |
| M | 310 | drivers/scsi/constants.c | {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"}, |
| M | 311 | drivers/scsi/constants.c | {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"}, |
| M | 312 | drivers/scsi/constants.c | {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"}, |
| M | 313 | drivers/scsi/constants.c | {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"}, |
| M | 314 | drivers/scsi/constants.c | {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"}, |
| M | 320 | drivers/scsi/constants.c | {0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"}, |
| M | 322 | drivers/scsi/constants.c | {0x53,0x02,D|T|W|R|O|M,"Medium removal prevented"}, |
| M | 328 | drivers/scsi/constants.c | {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"}, |
| M | 329 | drivers/scsi/constants.c | {0x5A,0x01,D|T|W|R|O|M,"Operator medium removal request"}, |
| M | 332 | drivers/scsi/constants.c | {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"}, |
| M | 333 | drivers/scsi/constants.c | {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"}, |
| M | 334 | drivers/scsi/constants.c | {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"}, |
| M | 335 | drivers/scsi/constants.c | {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"}, |
| M | 74 | include/linux/major.h | #define SCSI_MAJOR(M) \ |
| M | 75 | include/linux/major.h | ((M) == SCSI_DISK_MAJOR \ |
| M | 76 | include/linux/major.h | || (M) == SCSI_TAPE_MAJOR \ |
| M | 77 | include/linux/major.h | || (M) == SCSI_CDROM_MAJOR \ |
| M | 78 | include/linux/major.h | || (M) == SCSI_GENERIC_MAJOR) |