| tag | line | file | source code |
|---|
| hostno | 501 | drivers/scsi/aha152x.c | int aha152x_detect(int hostno) |
| hostno | 664 | drivers/scsi/aha152x.c | scsi_hosts[hostno].this_id=this_host; |
| hostno | 667 | drivers/scsi/aha152x.c | scsi_hosts[hostno].can_queue=AHA152X_MAXQUEUE; |
| hostno | 125 | drivers/scsi/g_NCR5380.c | int generic_NCR5380_detect(int hostno) { |
| hostno | 134 | drivers/scsi/g_NCR5380.c | instance = scsi_register (hostno, sizeof(struct NCR5380_hostdata)); |
| hostno | 147 | drivers/scsi/g_NCR5380.c | hostno, instance->irq); |
| hostno | 152 | drivers/scsi/g_NCR5380.c | printk("scsi%d : interrupts not enabled. for better interactive performance,\n", hostno); |
| hostno | 153 | drivers/scsi/g_NCR5380.c | printk("scsi%d : please jumper the board for a free IRQ.\n", hostno); |
| hostno | 293 | drivers/scsi/pas16.c | int pas16_detect(int hostno) { |
| hostno | 312 | drivers/scsi/pas16.c | printk("scsi%d : probing io_port %04x\n", hostno, (unsigned int) bases[current_base].io_port); |
| hostno | 319 | drivers/scsi/pas16.c | printk("scsi%d : detected board.\n", hostno); |
| hostno | 326 | drivers/scsi/pas16.c | printk("scsi%d : io_port = %04x\n", hostno, (unsigned int) io_port); |
| hostno | 332 | drivers/scsi/pas16.c | instance = scsi_register (hostno, sizeof(struct NCR5380_hostdata)); |
| hostno | 345 | drivers/scsi/pas16.c | hostno, instance->irq); |
| hostno | 350 | drivers/scsi/pas16.c | printk("scsi%d : interrupts not enabled. for better interactive performance,\n", hostno); |
| hostno | 351 | drivers/scsi/pas16.c | printk("scsi%d : please jumper the board for a free IRQ.\n", hostno); |
| hostno | 355 | drivers/scsi/pas16.c | printk("scsi%d : irq = %d\n", hostno, instance->irq); |
| hostno | 371 | drivers/scsi/pas16.c | ++hostno; |
| hostno | 169 | drivers/scsi/pas16.h | , instance->hostno, (reg), PAS16_io_port(reg))), inb( PAS16_io_port(reg)) ) |
| hostno | 173 | drivers/scsi/pas16.h | instance->hostno, (value), (reg), PAS16_io_port(reg)), \ |
| hostno | 194 | drivers/scsi/seagate.c | static int hostno = -1; |
| hostno | 257 | drivers/scsi/seagate.c | hostno, BORKEN_RATE, borken_calibration); |
| hostno | 267 | drivers/scsi/seagate.c | printk("scsi%d : borken timeout\n", hostno); |
| hostno | 294 | drivers/scsi/seagate.c | if (hostno != -1) |
| hostno | 352 | drivers/scsi/seagate.c | hostno = hostnum; |
| hostno | 355 | drivers/scsi/seagate.c | hostno, (int) irq); |
| hostno | 393 | drivers/scsi/seagate.c | "\n", hostno, (controller_type == SEAGATE) ? "seagate" : |
| hostno | 466 | drivers/scsi/seagate.c | printk("scsi%d : seagate_reconnect_intr() called\n", hostno); |
| hostno | 470 | drivers/scsi/seagate.c | printk("scsi%d: unexpected interrupt.\n", hostno); |
| hostno | 476 | drivers/scsi/seagate.c | "%d, %08x, %08x, %d, RECONNECT_NOW\n", hostno, |
| hostno | 487 | drivers/scsi/seagate.c | printk("scsi%d : done_fn(%d,%08x)", hostno, |
| hostno | 488 | drivers/scsi/seagate.c | hostno, temp); |
| hostno | 540 | drivers/scsi/seagate.c | hostno); |
| hostno | 622 | drivers/scsi/seagate.c | printk ("scsi%d : target = %d, command = ", hostno, target); |
| hostno | 630 | drivers/scsi/seagate.c | printk("scsi%d : reconnecting\n", hostno); |
| hostno | 634 | drivers/scsi/seagate.c | printk("scsi%d : connected, can reconnect\n", hostno); |
| hostno | 638 | drivers/scsi/seagate.c | hostno); |
| hostno | 642 | drivers/scsi/seagate.c | printk("scsi%d : allowed to reconnect\n", hostno); |
| hostno | 645 | drivers/scsi/seagate.c | printk("scsi%d : not allowed to reconnect\n", hostno); |
| hostno | 662 | drivers/scsi/seagate.c | printk("scsi%d : phase RESELECT \n", hostno); |
| hostno | 681 | drivers/scsi/seagate.c | hostno); |
| hostno | 695 | drivers/scsi/seagate.c | "\tData bus = %d\n", hostno, temp); |
| hostno | 703 | drivers/scsi/seagate.c | hostno, temp); |
| hostno | 736 | drivers/scsi/seagate.c | hostno); |
| hostno | 763 | drivers/scsi/seagate.c | printk ("scsi%d : phase = BUS FREE \n", hostno); |
| hostno | 789 | drivers/scsi/seagate.c | printk("scsi%d : phase = SELECTION\n", hostno); |
| hostno | 817 | drivers/scsi/seagate.c | printk("scsi%d : arbitration lost\n", hostno); |
| hostno | 819 | drivers/scsi/seagate.c | printk("scsi%d : arbitration timeout.\n", hostno); |
| hostno | 826 | drivers/scsi/seagate.c | printk("scsi%d : arbitration complete\n", hostno); |
| hostno | 861 | drivers/scsi/seagate.c | hostno, status_read, temp, st0x_aborted); |
| hostno | 871 | drivers/scsi/seagate.c | hostno, target, STATUS); |
| hostno | 886 | drivers/scsi/seagate.c | hostno); |
| hostno | 900 | drivers/scsi/seagate.c | hostno, nobuffs); |
| hostno | 903 | drivers/scsi/seagate.c | hostno, i, buffer[i].address, buffer[i].length); |
| hostno | 912 | drivers/scsi/seagate.c | printk("scsi%d : scatter gather not requested.\n", hostno); |
| hostno | 920 | drivers/scsi/seagate.c | printk("scsi%d : len = %d\n", hostno, len); |
| hostno | 959 | drivers/scsi/seagate.c | printk("scsi%d : phase = INFORMATION TRANSFER\n", hostno); |
| hostno | 980 | drivers/scsi/seagate.c | printk("scsi%d : got parity error\n", hostno); |
| hostno | 995 | drivers/scsi/seagate.c | hostno); |
| hostno | 999 | drivers/scsi/seagate.c | hostno); |
| hostno | 1003 | drivers/scsi/seagate.c | hostno); |
| hostno | 1007 | drivers/scsi/seagate.c | hostno); |
| hostno | 1011 | drivers/scsi/seagate.c | hostno); |
| hostno | 1015 | drivers/scsi/seagate.c | hostno); |
| hostno | 1019 | drivers/scsi/seagate.c | hostno); |
| hostno | 1036 | drivers/scsi/seagate.c | hostno, target, lun); |
| hostno | 1050 | drivers/scsi/seagate.c | " len = %d, data = %08x\n", hostno, SCint->underflow, |
| hostno | 1078 | drivers/scsi/seagate.c | hostno, len, data); |
| hostno | 1148 | drivers/scsi/seagate.c | hostno, len, data); |
| hostno | 1177 | drivers/scsi/seagate.c | " len = %d, data = %08x\n", hostno, SCint->underflow, |
| hostno | 1204 | drivers/scsi/seagate.c | printk("scsi%d: transfered += %d\n", hostno, transfersize); |
| hostno | 1210 | drivers/scsi/seagate.c | hostno, len, data); |
| hostno | 1218 | drivers/scsi/seagate.c | printk("scsi%d: transfered += %d\n", hostno, len); |
| hostno | 1281 | drivers/scsi/seagate.c | printk("scsi%d: transfered -= %d\n", hostno, len); |
| hostno | 1294 | drivers/scsi/seagate.c | hostno, len, data); |
| hostno | 1333 | drivers/scsi/seagate.c | printk("scsi%d : sent IDENTIFY message.\n", hostno); |
| hostno | 1343 | drivers/scsi/seagate.c | printk("scsi%d : sent ABORT message to cancle incorrect I_T_L nexus.\n", hostno); |
| hostno | 1351 | drivers/scsi/seagate.c | printk("scsi%d : target %d requested MSGOUT, sent NOP message.\n", hostno, target); |
| hostno | 1368 | drivers/scsi/seagate.c | printk("scsi%d : disconnected.\n", hostno); |
| hostno | 1381 | drivers/scsi/seagate.c | printk("scsi%d : command complete.\n", hostno); |
| hostno | 1387 | drivers/scsi/seagate.c | printk("scsi%d : abort message.\n", hostno); |
| hostno | 1397 | drivers/scsi/seagate.c | printk("scsi%d : pointers saved.\n", hostno); |
| hostno | 1407 | drivers/scsi/seagate.c | printk("scsi%d : pointers restored.\n", hostno); |
| hostno | 1424 | drivers/scsi/seagate.c | hostno, target, message & 7); |
| hostno | 1436 | drivers/scsi/seagate.c | hostno, message, target); |
| hostno | 1443 | drivers/scsi/seagate.c | printk("scsi%d : unknown phase.\n", hostno); |
| hostno | 1461 | drivers/scsi/seagate.c | printk("scsi%d : Transfered %d bytes\n", hostno, transfered); |
| hostno | 1471 | drivers/scsi/seagate.c | printk("scsi%d : status = ", hostno); |
| hostno | 1509 | drivers/scsi/seagate.c | hostno); |
| hostno | 1527 | drivers/scsi/seagate.c | printk("scsi%d : closing I_T_L nexus.\n", hostno); |
| hostno | 1540 | drivers/scsi/seagate.c | hostno); |
| hostno | 1677 | drivers/scsi/seagate.c | hostno, heads, cylinders, sectors, total_sectors, formatted_sectors); |
| hostno | 196 | drivers/scsi/t128.c | int t128_detect(int hostno) { |
| hostno | 210 | drivers/scsi/t128.c | printk("scsi%d : probing address %08x\n", hostno, (unsigned int) bases[current_base].address); |
| hostno | 218 | drivers/scsi/t128.c | printk("scsi%d : detected board.\n", hostno); |
| hostno | 225 | drivers/scsi/t128.c | printk("scsi%d : base = %08x\n", hostno, (unsigned int) base); |
| hostno | 231 | drivers/scsi/t128.c | instance = scsi_register (hostno, sizeof(struct NCR5380_hostdata)); |
| hostno | 244 | drivers/scsi/t128.c | hostno, instance->irq); |
| hostno | 249 | drivers/scsi/t128.c | printk("scsi%d : interrupts not enabled. for better interactive performance,\n", hostno); |
| hostno | 250 | drivers/scsi/t128.c | printk("scsi%d : please jumper the board for a free IRQ.\n", hostno); |
| hostno | 254 | drivers/scsi/t128.c | printk("scsi%d : irq = %d\n", hostno, instance->irq); |
| hostno | 270 | drivers/scsi/t128.c | ++hostno; |
| hostno | 146 | drivers/scsi/t128.h | , instance->hostno, (reg), T128_address(reg))), *(T128_address(reg))) |
| hostno | 150 | drivers/scsi/t128.h | instance->hostno, (value), (reg), T128_address(reg)); \ |