root/include/linux/tty.h

/* [previous][next][first][last][top][bottom][index][help] */

INCLUDED FROM


   1 #ifndef _LINUX_TTY_H
   2 #define _LINUX_TTY_H
   3 
   4 /*
   5  * 'tty.h' defines some structures used by tty_io.c and some defines.
   6  */
   7 
   8 #include <linux/termios.h>
   9 
  10 #include <asm/system.h>
  11 
  12 #define NR_CONSOLES     8
  13 #define NR_LDISCS       16
  14 
  15 /*
  16  * These are set up by the setup-routine at boot-time:
  17  */
  18 
  19 struct screen_info {
  20         unsigned char  orig_x;
  21         unsigned char  orig_y;
  22         unsigned char  unused1[2];
  23         unsigned short orig_video_page;
  24         unsigned char  orig_video_mode;
  25         unsigned char  orig_video_cols;
  26         unsigned short orig_video_ega_ax;
  27         unsigned short orig_video_ega_bx;
  28         unsigned short orig_video_ega_cx;
  29         unsigned char  orig_video_lines;
  30 };
  31 
  32 extern struct screen_info screen_info;
  33 
  34 #define ORIG_X                  (screen_info.orig_x)
  35 #define ORIG_Y                  (screen_info.orig_y)
  36 #define ORIG_VIDEO_PAGE         (screen_info.orig_video_page)
  37 #define ORIG_VIDEO_MODE         (screen_info.orig_video_mode)
  38 #define ORIG_VIDEO_COLS         (screen_info.orig_video_cols)
  39 #define ORIG_VIDEO_EGA_AX       (screen_info.orig_video_ega_ax)
  40 #define ORIG_VIDEO_EGA_BX       (screen_info.orig_video_ega_bx)
  41 #define ORIG_VIDEO_EGA_CX       (screen_info.orig_video_ega_cx)
  42 #define ORIG_VIDEO_LINES        (screen_info.orig_video_lines)
  43 
  44 #define VIDEO_TYPE_MDA          0x10    /* Monochrome Text Display      */
  45 #define VIDEO_TYPE_CGA          0x11    /* CGA Display                  */
  46 #define VIDEO_TYPE_EGAM         0x20    /* EGA/VGA in Monochrome Mode   */
  47 #define VIDEO_TYPE_EGAC         0x21    /* EGA/VGA in Color Mode        */
  48 
  49 /*
  50  * This character is the same as _POSIX_VDISABLE: it cannot be used as
  51  * a c_cc[] character, but indicates that a particular special character
  52  * isn't in use (eg VINTR ahs no character etc)
  53  */
  54 #define __DISABLED_CHAR '\0'
  55 
  56 /*
  57  * See comment for the tty_struct structure before changing
  58  * TTY_BUF_SIZE.  Actually, there should be different sized tty_queue
  59  * structures for different purposes.  1024 bytes for the transmit
  60  * queue is way overkill.  TYT, 9/14/92
  61  */
  62 #define TTY_BUF_SIZE 1024       /* Must be a power of 2 */
  63 
  64 struct tty_queue {
  65         unsigned long data;
  66         unsigned long head;
  67         unsigned long tail;
  68         struct wait_queue * proc_list;
  69         unsigned char buf[TTY_BUF_SIZE];
  70 };
  71 
  72 struct serial_struct {
  73         int     type;
  74         int     line;
  75         int     port;
  76         int     irq;
  77         int     flags;
  78         int     xmit_fifo_size;
  79         int     custom_divisor;
  80         int     baud_base;
  81         char    close_delay;
  82         char    reserved_char[3];
  83         int     hub6;
  84         int     reserved[5];
  85 };
  86 
  87 /*
  88  * These are the supported serial types.
  89  */
  90 #define PORT_UNKNOWN    0
  91 #define PORT_8250       1
  92 #define PORT_16450      2
  93 #define PORT_16550      3
  94 #define PORT_16550A     4
  95 #define PORT_MAX        4
  96 
  97 /*
  98  * Definitions for async_struct (and serial_struct) flags field
  99  */
 100 #define ASYNC_FOURPORT  0x0002  /* Set OU1, OUT2 per AST Fourport settings */
 101 #define ASYNC_SAK       0x0004  /* Secure Attention Key (Orange book) */
 102 #define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
 103 
 104 #define ASYNC_SPD_MASK  0x0030
 105 #define ASYNC_SPD_HI    0x0010  /* Use 56000 instead of 38400 bps */
 106 #define ASYNC_SPD_VHI   0x0020  /* Use 115200 instead of 38400 bps */
 107 #define ASYNC_SPD_CUST  0x0030  /* Use user-specified divisor */
 108 
 109 #define ASYNC_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */
 110 #define ASYNC_AUTO_IRQ  0x0080 /* Do automatic IRQ during autoconfiguration */
 111 #define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
 112 #define ASYNC_PGRP_LOCKOUT    0x0200 /* Lock out cua opens based on pgrp */
 113 #define ASYNC_CALLOUT_NOHUP   0x0400 /* Don't do hangups for cua device */
 114 
 115 #define ASYNC_FLAGS     0x0FFF  /* Possible legal async flags */
 116 #define ASYNC_USR_MASK 0x0430   /* Legal flags that non-privileged
 117                                  * users can set or reset */
 118 
 119 /* Internal flags used only by kernel/chr_drv/serial.c */
 120 #define ASYNC_INITIALIZED       0x80000000 /* Serial port was initialized */
 121 #define ASYNC_CALLOUT_ACTIVE    0x40000000 /* Call out device is active */
 122 #define ASYNC_NORMAL_ACTIVE     0x20000000 /* Normal device is active */
 123 #define ASYNC_BOOT_AUTOCONF     0x10000000 /* Autoconfigure port on bootup */
 124 #define ASYNC_CLOSING           0x08000000 /* Serial port is closing */
 125 
 126 #define IS_A_CONSOLE(min)       (((min) & 0xC0) == 0x00)
 127 #define IS_A_SERIAL(min)        (((min) & 0xC0) == 0x40)
 128 #define IS_A_PTY(min)           ((min) & 0x80)
 129 #define IS_A_PTY_MASTER(min)    (((min) & 0xC0) == 0x80)
 130 #define IS_A_PTY_SLAVE(min)     (((min) & 0xC0) == 0xC0)
 131 #define PTY_OTHER(min)          ((min) ^ 0x40)
 132 
 133 #define SL_TO_DEV(line)         ((line) | 0x40)
 134 #define DEV_TO_SL(min)          ((min) & 0x3F)
 135 
 136 #define INC(a) ((a) = ((a)+1) & (TTY_BUF_SIZE-1))
 137 #define DEC(a) ((a) = ((a)-1) & (TTY_BUF_SIZE-1))
 138 #define EMPTY(a) ((a)->head == (a)->tail)
 139 #define LEFT(a) (((a)->tail-(a)->head-1)&(TTY_BUF_SIZE-1))
 140 #define LAST(a) ((a)->buf[(TTY_BUF_SIZE-1)&((a)->head-1)])
 141 #define FULL(a) (!LEFT(a))
 142 #define CHARS(a) (((a)->head-(a)->tail)&(TTY_BUF_SIZE-1))
 143 
 144 extern void put_tty_queue(char c, struct tty_queue * queue);
 145 extern int get_tty_queue(struct tty_queue * queue);
 146 
 147 #define INTR_CHAR(tty) ((tty)->termios->c_cc[VINTR])
 148 #define QUIT_CHAR(tty) ((tty)->termios->c_cc[VQUIT])
 149 #define ERASE_CHAR(tty) ((tty)->termios->c_cc[VERASE])
 150 #define KILL_CHAR(tty) ((tty)->termios->c_cc[VKILL])
 151 #define WERASE_CHAR(tty) ((tty)->termios->c_cc[VWERASE])
 152 #define EOF_CHAR(tty) ((tty)->termios->c_cc[VEOF])
 153 #define START_CHAR(tty) ((tty)->termios->c_cc[VSTART])
 154 #define STOP_CHAR(tty) ((tty)->termios->c_cc[VSTOP])
 155 #define SUSPEND_CHAR(tty) ((tty)->termios->c_cc[VSUSP])
 156 #define LNEXT_CHAR(tty) ((tty)->termios->c_cc[VLNEXT])
 157 
 158 #define _L_FLAG(tty,f)  ((tty)->termios->c_lflag & f)
 159 #define _I_FLAG(tty,f)  ((tty)->termios->c_iflag & f)
 160 #define _O_FLAG(tty,f)  ((tty)->termios->c_oflag & f)
 161 #define _C_FLAG(tty,f)  ((tty)->termios->c_cflag & f)
 162 
 163 #define L_CANON(tty)    _L_FLAG((tty),ICANON)
 164 #define L_ISIG(tty)     _L_FLAG((tty),ISIG)
 165 #define L_ECHO(tty)     _L_FLAG((tty),ECHO)
 166 #define L_ECHOE(tty)    _L_FLAG((tty),ECHOE)
 167 #define L_ECHOK(tty)    _L_FLAG((tty),ECHOK)
 168 #define L_ECHONL(tty)   _L_FLAG((tty),ECHONL)
 169 #define L_ECHOCTL(tty)  _L_FLAG((tty),ECHOCTL)
 170 #define L_ECHOKE(tty)   _L_FLAG((tty),ECHOKE)
 171 #define L_TOSTOP(tty)   _L_FLAG((tty),TOSTOP)
 172 
 173 #define I_IGNBRK(tty)   _I_FLAG((tty),IGNBRK)
 174 #define I_BRKINT(tty)   _I_FLAG((tty),BRKINT)
 175 #define I_IGNPAR(tty)   _I_FLAG((tty),IGNPAR)
 176 #define I_PARMRK(tty)   _I_FLAG((tty),PARMRK)
 177 #define I_INPCK(tty)    _I_FLAG((tty),INPCK)
 178 #define I_UCLC(tty)     _I_FLAG((tty),IUCLC)
 179 #define I_NLCR(tty)     _I_FLAG((tty),INLCR)
 180 #define I_CRNL(tty)     _I_FLAG((tty),ICRNL)
 181 #define I_NOCR(tty)     _I_FLAG((tty),IGNCR)
 182 #define I_IXON(tty)     _I_FLAG((tty),IXON)
 183 #define I_IXANY(tty)    _I_FLAG((tty),IXANY)
 184 #define I_STRP(tty)     _I_FLAG((tty),ISTRIP)
 185 
 186 #define O_POST(tty)     _O_FLAG((tty),OPOST)
 187 #define O_LCUC(tty)     _O_FLAG((tty),OLCUC)
 188 #define O_NLCR(tty)     _O_FLAG((tty),ONLCR)
 189 #define O_CRNL(tty)     _O_FLAG((tty),OCRNL)
 190 #define O_NOCR(tty)     _O_FLAG((tty),ONOCR)
 191 #define O_NLRET(tty)    _O_FLAG((tty),ONLRET)
 192 #define O_TABDLY(tty)   _O_FLAG((tty),TABDLY)
 193 
 194 #define C_LOCAL(tty)    _C_FLAG((tty),CLOCAL)
 195 #define C_RTSCTS(tty)   _C_FLAG((tty),CRTSCTS)
 196 #define C_SPEED(tty)    ((tty)->termios->c_cflag & CBAUD)
 197 #define C_HUP(tty)      (C_SPEED((tty)) == B0)
 198 
 199 /*
 200  * Where all of the state associated with a tty is kept while the tty
 201  * is open.  Since the termios state should be kept even if the tty
 202  * has been closed --- for things like the baud rate, etc --- it is
 203  * not stored here, but rather a pointer to the real state is stored
 204  * here.  Possible the winsize structure should have the same
 205  * treatment, but (1) the default 80x24 is usually right and (2) it's
 206  * most often used by a windowing system, which will set the correct
 207  * size each time the window is created or resized anyway.
 208  * IMPORTANT: since this structure is dynamically allocated, it must
 209  * be no larger than 4096 bytes.  Changing TTY_BUF_SIZE will change
 210  * the size of this structure, and it needs to be done with care.
 211  *                                              - TYT, 9/14/92
 212  */
 213 struct tty_struct {
 214         struct termios *termios;
 215         int pgrp;
 216         int session;
 217         unsigned char stopped:1, hw_stopped:1, packet:1, lnext:1;
 218         unsigned char char_error:3;
 219         unsigned char ctrl_status;
 220         short line;
 221         int disc;
 222         int flags;
 223         int count;
 224         int column;
 225         struct winsize winsize;
 226         int  (*open)(struct tty_struct * tty, struct file * filp);
 227         void (*close)(struct tty_struct * tty, struct file * filp);
 228         void (*write)(struct tty_struct * tty);
 229         int  (*ioctl)(struct tty_struct *tty, struct file * file,
 230                     unsigned int cmd, unsigned long arg);
 231         void (*throttle)(struct tty_struct * tty, int status);
 232         void (*set_termios)(struct tty_struct *tty, struct termios * old);
 233         void (*stop)(struct tty_struct *tty);
 234         void (*start)(struct tty_struct *tty);
 235         void (*hangup)(struct tty_struct *tty);
 236         struct tty_struct *link;
 237         unsigned char *write_data_ptr;
 238         int write_data_cnt;
 239         void (*write_data_callback)(void * data);
 240         void * write_data_arg;
 241         int readq_flags[TTY_BUF_SIZE/32];
 242         struct tty_queue read_q;
 243         struct tty_queue write_q;
 244         struct tty_queue secondary;
 245         struct wait_queue * except_q;
 246         void *disc_data;
 247 };
 248 
 249 struct tty_ldisc {
 250         int     flags;
 251         /*
 252          * The following routines are called from above.
 253          */
 254         int     (*open)(struct tty_struct *);
 255         void    (*close)(struct tty_struct *);
 256         int     (*read)(struct tty_struct * tty, struct file * file,
 257                         char * buf, int nr);
 258         int     (*write)(struct tty_struct * tty, struct file * file,
 259                          char * buf, int nr);   
 260         int     (*ioctl)(struct tty_struct * tty, struct file * file,
 261                          unsigned int cmd, unsigned long arg);
 262         /*
 263          * The following routines are called from below.
 264          */
 265         void    (*handler)(struct tty_struct *);
 266 };
 267 
 268 #define LDISC_FLAG_DEFINED      0x00000001
 269 
 270 /*
 271  * These are the different types of thottle status which can be sent
 272  * to the low-level tty driver.  The tty_io.c layer is responsible for
 273  * notifying the low-level tty driver of the following conditions:
 274  * secondary queue full, secondary queue available, and read queue
 275  * available.  The low-level driver must send the read queue full
 276  * command to itself, if it is interested in that condition.
 277  *
 278  * Note that the low-level tty driver may elect to ignore one or both
 279  * of these conditions; normally, however, it will use ^S/^Q or some
 280  * sort of hardware flow control to regulate the input to try to avoid
 281  * overflow.  While the low-level driver is responsible for all
 282  * receiving flow control, note that the ^S/^Q handling (but not
 283  * hardware flow control) is handled by the upper layer, in
 284  * copy_to_cooked.  
 285  */
 286 #define TTY_THROTTLE_SQ_FULL    1
 287 #define TTY_THROTTLE_SQ_AVAIL   2
 288 #define TTY_THROTTLE_RQ_FULL    3
 289 #define TTY_THROTTLE_RQ_AVAIL   4
 290 
 291 /*
 292  * This defines the low- and high-watermarks for the various conditions.
 293  * Again, the low-level driver is free to ignore any of these, and has
 294  * to implement RQ_THREHOLD_LW for itself if it wants it.
 295  */
 296 #define SQ_THRESHOLD_LW 16
 297 #define SQ_THRESHOLD_HW 768
 298 #define RQ_THRESHOLD_LW 16
 299 #define RQ_THRESHOLD_HW 768
 300 
 301 /*
 302  * These bits are used in the flags field of the tty structure.
 303  * 
 304  * So that interrupts won't be able to mess up the queues,
 305  * copy_to_cooked must be atomic with repect to itself, as must
 306  * tty->write.  Thus, you must use the inline functions set_bit() and
 307  * clear_bit() to make things atomic.
 308  */
 309 #define TTY_WRITE_BUSY 0
 310 #define TTY_READ_BUSY 1
 311 #define TTY_CR_PENDING 2
 312 #define TTY_SQ_THROTTLED 3
 313 #define TTY_RQ_THROTTLED 4
 314 #define TTY_IO_ERROR 5
 315 #define TTY_SLAVE_OPENED 6
 316 #define TTY_EXCLUSIVE 7
 317 
 318 /*
 319  * When a break, frame error, or parity error happens, these codes are
 320  * stuffed into the read queue, and the relevant bit in readq_flag bit
 321  * array is set.
 322  */
 323 #define TTY_BREAK       1
 324 #define TTY_FRAME       2
 325 #define TTY_PARITY      3
 326 #define TTY_OVERRUN     4
 327 
 328 #define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
 329 #define TTY_READ_FLUSH(tty) tty_read_flush((tty))
 330 
 331 extern void tty_write_flush(struct tty_struct *);
 332 extern void tty_read_flush(struct tty_struct *);
 333 
 334 extern struct tty_struct *tty_table[];
 335 extern struct termios *tty_termios[];
 336 extern struct termios *termios_locked[];
 337 extern int tty_check_write[];
 338 extern struct tty_struct * redirect;
 339 extern struct tty_ldisc ldiscs[];
 340 extern int fg_console;
 341 extern unsigned long video_num_columns;
 342 extern unsigned long video_num_lines;
 343 extern struct wait_queue * keypress_wait;
 344 
 345 #define TTY_TABLE_IDX(nr)       ((nr) ? (nr) : (fg_console+1))
 346 #define TTY_TABLE(nr)           (tty_table[TTY_TABLE_IDX(nr)])
 347 
 348 /*      intr=^C         quit=^|         erase=del       kill=^U
 349         eof=^D          vtime=\0        vmin=\1         sxtc=\0
 350         start=^Q        stop=^S         susp=^Z         eol=\0
 351         reprint=^R      discard=^U      werase=^W       lnext=^V
 352         eol2=\0
 353 */
 354 #define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
 355 
 356 extern long rs_init(long);
 357 extern long lp_init(long);
 358 extern long con_init(long);
 359 extern long tty_init(long);
 360 
 361 extern void flush_input(struct tty_struct * tty);
 362 extern void flush_output(struct tty_struct * tty);
 363 extern void wait_until_sent(struct tty_struct * tty);
 364 extern void copy_to_cooked(struct tty_struct * tty);
 365 extern int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc);
 366 extern int tty_read_raw_data(struct tty_struct *tty, unsigned char *bufp,
 367                              int buflen);
 368 extern int tty_write_data(struct tty_struct *tty, char *bufp, int buflen,
 369                           void (*callback)(void * data), void * callarg);
 370 
 371 extern int tty_ioctl(struct inode *, struct file *, unsigned int, unsigned long);
 372 extern int is_orphaned_pgrp(int pgrp);
 373 extern int is_ignored(int sig);
 374 extern int tty_signal(int sig, struct tty_struct *tty);
 375 extern void tty_hangup(struct tty_struct * tty);
 376 extern void tty_vhangup(struct tty_struct * tty);
 377 extern void tty_unhangup(struct file *filp);
 378 extern int tty_hung_up_p(struct file * filp);
 379 extern void do_SAK(struct tty_struct *tty);
 380 extern void disassociate_ctty(int priv);
 381 
 382 /* tty write functions */
 383 
 384 extern void rs_write(struct tty_struct * tty);
 385 extern void con_write(struct tty_struct * tty);
 386 
 387 /* serial.c */
 388 
 389 extern int  rs_open(struct tty_struct * tty, struct file * filp);
 390 
 391 /* pty.c */
 392 
 393 extern int  pty_open(struct tty_struct * tty, struct file * filp);
 394 
 395 /* console.c */
 396 
 397 extern int con_open(struct tty_struct * tty, struct file * filp);
 398 extern void update_screen(int new_console);
 399 extern void blank_screen(void);
 400 extern void unblank_screen(void);
 401 
 402 /* vt.c */
 403 
 404 extern int vt_ioctl(struct tty_struct *tty, struct file * file,
 405                     unsigned int cmd, unsigned long arg);
 406 
 407 #endif

/* [previous][next][first][last][top][bottom][index][help] */