tag	line	file	source code
serial_inp	341	drivers/char/serial.c	ch = serial_inp(info, UART_RX);
serial_inp	363	drivers/char/serial.c	} while ((*status = serial_inp(info, UART_LSR)) & UART_LSR_DR);
serial_inp	495	drivers/char/serial.c	!(serial_inp(info, UART_IIR) & UART_IIR_NO_INT))) {
serial_inp	497	drivers/char/serial.c	status = serial_inp(info, UART_LSR);
serial_inp	766	drivers/char/serial.c	(void)serial_inp(info, UART_LSR);
serial_inp	767	drivers/char/serial.c	(void)serial_inp(info, UART_RX);
serial_inp	768	drivers/char/serial.c	(void)serial_inp(info, UART_IIR);
serial_inp	769	drivers/char/serial.c	(void)serial_inp(info, UART_MSR);
serial_inp	802	drivers/char/serial.c	(void)serial_inp(info, UART_LSR);
serial_inp	803	drivers/char/serial.c	(void)serial_inp(info, UART_RX);
serial_inp	804	drivers/char/serial.c	(void)serial_inp(info, UART_IIR);
serial_inp	805	drivers/char/serial.c	(void)serial_inp(info, UART_MSR);
serial_inp	1001	drivers/char/serial.c	if (serial_inp(info, UART_LSR) & UART_LSR_THRE) {
serial_inp	1070	drivers/char/serial.c	mcr = serial_inp(info, UART_MCR);
serial_inp	1310	drivers/char/serial.c	serial_out(info, UART_LCR, serial_inp(info, UART_LCR) | UART_LCR_SBC);
serial_inp	1312	drivers/char/serial.c	serial_out(info, UART_LCR, serial_inp(info, UART_LCR) & ~UART_LCR_SBC);
serial_inp	1536	drivers/char/serial.c	if (!(serial_inp(info, UART_LSR) & UART_LSR_THRE)) {
serial_inp	1659	drivers/char/serial.c	serial_inp(info, UART_MCR) |
serial_inp	1821	drivers/char/serial.c	save_IER = serial_inp(info, UART_IER);
serial_inp	1822	drivers/char/serial.c	save_MCR = serial_inp(info, UART_MCR);
serial_inp	1839	drivers/char/serial.c	(void)serial_inp(info, UART_LSR);
serial_inp	1840	drivers/char/serial.c	(void)serial_inp(info, UART_RX);
serial_inp	1841	drivers/char/serial.c	(void)serial_inp(info, UART_IIR);
serial_inp	1842	drivers/char/serial.c	(void)serial_inp(info, UART_MSR);
serial_inp	1921	drivers/char/serial.c	scratch = serial_inp(info, UART_IER);
serial_inp	1923	drivers/char/serial.c	scratch2 = serial_inp(info, UART_IER);
serial_inp	1940	drivers/char/serial.c	scratch = serial_inp(info, UART_MCR);
serial_inp	1942	drivers/char/serial.c	scratch2 = serial_inp(info, UART_MSR);
serial_inp	1944	drivers/char/serial.c	status1 = serial_inp(info, UART_MSR) & 0xF0;