root/drivers/net/eexpress.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. express_probe
  2. eexp_probe1
  3. eexp_open
  4. eexp_send_packet
  5. eexp_interrupt
  6. eexp_close
  7. eexp_get_stats
  8. set_multicast_list
  9. read_eeprom
  10. init_82586_mem
  11. init_rx_bufs
  12. hardware_send_packet
  13. eexp_rx

   1 
   2 /* eexpress.c: Intel EtherExpress device driver for Linux. */
   3 /*
   4         Written 1993 by Donald Becker.
   5         Copyright 1993 United States Government as represented by the Director,
   6         National Security Agency.  This software may only be used and distributed
   7         according to the terms of the GNU Public License as modified by SRC,
   8         incorported herein by reference.
   9 
  10         The author may be reached as becker@super.org or
  11         C/O Supercomputing Research Ctr., 17100 Science Dr., Bowie MD 20715
  12 
  13         Things remaining to do:
  14         Check that the 586 and ASIC are reset/unreset at the right times.
  15         Check tx and rx buffer setup.
  16         The current Tx is single-buffer-only.
  17         Move the theory of operation and memory map documentation.
  18         Rework the board error reset
  19         The statistics need to be updated correctly.
  20 */
  21 
  22 static char *version =
  23         "eexpress.c:v0.07 1/19/94 Donald Becker (becker@super.org)\n";
  24 
  25 #include <linux/config.h>
  26 
  27 /*
  28   Sources:
  29         This driver wouldn't have been written with the availability of the
  30         Crynwr driver source code.      It provided a known-working implementation
  31         that filled in the gaping holes of the Intel documention.  Three cheers
  32         for Russ Nelson.
  33 
  34         Intel Microcommunications Databook, Vol. 1, 1990. It provides just enough
  35         info that the casual reader might think that it documents the i82586.
  36 */
  37 
  38 #include <linux/kernel.h>
  39 #include <linux/sched.h>
  40 #include <linux/types.h>
  41 #include <linux/fcntl.h>
  42 #include <linux/interrupt.h>
  43 #include <linux/ptrace.h>
  44 #include <linux/ioport.h>
  45 #include <linux/string.h>
  46 #include <linux/in.h>
  47 #include <asm/system.h>
  48 #include <asm/bitops.h>
  49 #include <asm/io.h>
  50 #include <asm/dma.h>
  51 #include <linux/errno.h>
  52 
  53 #include <linux/netdevice.h>
  54 #include <linux/etherdevice.h>
  55 #include <linux/skbuff.h>
  56 
  57 #include <linux/malloc.h>
  58 
  59 /* use 0 for production, 1 for verification, 2..7 for debug */
  60 #ifndef NET_DEBUG
  61 #define NET_DEBUG 2
  62 #endif
  63 static unsigned int net_debug = NET_DEBUG;
  64 
  65 /*
  66                         Details of the i82586.
  67 
  68    You'll really need the databook to understand the details of this part,
  69    but the outline is that the i82586 has two seperate processing units.
  70 
  71    The Rx unit uses a list of frame descriptors and a list of data buffer
  72    descriptors.  We use full-sized (1518 byte) data buffers, so there is
  73    a one-to-one pairing of frame descriptors to buffer descriptors.
  74 
  75    The Tx ("command") unit executes a list of commands that look like:
  76                 Status word             Written by the 82586 when the command is done.
  77                 Command word    Command in lower 3 bits, post-command action in upper 3
  78                 Link word               The address of the next command.
  79                 Parameters              (as needed).
  80 
  81         Some definitions related to the Command Word are:
  82  */
  83 #define CMD_EOL         0x8000                  /* The last command of the list, stop. */
  84 #define CMD_SUSP        0x4000                  /* Suspend after doing cmd. */
  85 #define CMD_INTR        0x2000                  /* Interrupt after doing cmd. */
  86 
  87 enum commands {
  88         CmdNOp = 0, CmdSASetup = 1, CmdConfigure = 2, CmdMulticastList = 3,
  89         CmdTx = 4, CmdTDR = 5, CmdDump = 6, CmdDiagnose = 7};
  90 
  91 /* Information that need to be kept for each board. */
  92 struct net_local {
  93         struct enet_statistics stats;
  94         int last_restart;
  95         short rx_head;
  96         short rx_tail;
  97         short tx_head;
  98         short tx_cmd_link;
  99         short tx_reap;
 100 };
 101 
 102 /*
 103                 Details of the EtherExpress Implementation
 104   The EtherExpress takes an unusual approach to host access to packet buffer
 105   memory.  The host can use either the Dataport, with independent
 106   autoincrementing read and write pointers, or it can I/O map 32 bytes of the
 107   memory using the "Shadow Memory Pointer" (SMB) as follows:
 108                         ioaddr                                          Normal EtherExpress registers
 109                         ioaddr+0x4000...0x400f          Buffer Memory at SMB...SMB+15
 110                         ioaddr+0x8000...0x800f          Buffer Memory at SMB+16...SMB+31
 111                         ioaddr+0xC000...0xC007          "" SMB+16...SMB+23 (hardware flaw?)
 112                         ioaddr+0xC008...0xC00f          Buffer Memory at 0x0008...0x000f
 113   The last I/O map set is useful if you put the i82586 System Command Block
 114   (the command mailbox) exactly at 0x0008.  (There seems to be some
 115   undocumented init structure at 0x0000-7, so I had to use the Crywnr memory
 116   setup verbatim for those four words anyway.)
 117 
 118   A problem with using either one of these mechanisms is that you must run
 119   single-threaded, or the interrupt handler must restore a changed value of
 120   the read, write, or SMB pointers.
 121 
 122   Unlike the Crynwr driver, my driver mostly ignores the I/O mapped "feature"
 123   and relies heavily on the dataport for buffer memory access.  To minimize
 124   switching, the read_pointer is dedicated to the Rx interrupt handler, and
 125   the write_pointer is used by the send_packet() routine (it's carefully saved
 126   and restored when it's needed by the interrupt handler).
 127   */
 128 
 129 /* Offsets from the base I/O address. */
 130 #define DATAPORT        0       /* Data Transfer Register. */
 131 #define WRITE_PTR       2       /* Write Address Pointer. */
 132 #define READ_PTR        4       /* Read Address Pointer. */
 133 #define SIGNAL_CA       6       /* Frob the 82586 Channel Attention line. */
 134 #define SET_IRQ         7       /* IRQ Select. */
 135 #define SHADOW_PTR      8       /* Shadow Memory Bank Pointer. */
 136 #define MEM_Ctrl        11
 137 #define MEM_Page_Ctrl   12
 138 #define Config          13
 139 #define EEPROM_Ctrl             14
 140 #define ID_PORT         15
 141 
 142 /*      EEPROM_Ctrl bits. */
 143 
 144 #define EE_SHIFT_CLK    0x01    /* EEPROM shift clock. */
 145 #define EE_CS                   0x02    /* EEPROM chip select. */
 146 #define EE_DATA_WRITE   0x04    /* EEPROM chip data in. */
 147 #define EE_DATA_READ    0x08    /* EEPROM chip data out. */
 148 #define EE_CTRL_BITS    (EE_SHIFT_CLK | EE_CS | EE_DATA_WRITE | EE_DATA_READ)
 149 #define ASIC_RESET              0x40
 150 #define _586_RESET              0x80
 151 
 152 /* Offsets to elements of the System Control Block structure. */
 153 #define SCB_STATUS      0xc008
 154 #define SCB_CMD         0xc00A
 155 #define  CUC_START       0x0100
 156 #define  CUC_RESUME      0x0200
 157 #define  CUC_SUSPEND 0x0300
 158 #define  RX_START        0x0010
 159 #define  RX_RESUME       0x0020
 160 #define  RX_SUSPEND      0x0030
 161 #define SCB_CBL         0xc00C  /* Command BLock offset. */
 162 #define SCB_RFA         0xc00E  /* Rx Frame Area offset. */
 163 
 164 /*
 165   What follows in 'init_words[]' is the "program" that is downloaded to the
 166   82586 memory.  It's mostly tables and command blocks, and starts at the
 167   reset address 0xfffff6.
 168 
 169   Even with the additional "don't care" values, doing it this way takes less
 170   program space than initializing the individual tables, and I feel it's much
 171   cleaner.
 172 
 173   The databook is particularly useless for the first two structures; they are
 174   completely undocumented.  I had to use the Crynwr driver as an example.
 175 
 176    The memory setup is as follows:
 177    */
 178 
 179 #define CONFIG_CMD      0x0018
 180 #define SET_SA_CMD      0x0024
 181 #define SA_OFFSET       0x002A
 182 #define IDLELOOP        0x30
 183 #define TDR_CMD         0x38
 184 #define TDR_TIME        0x3C
 185 #define DUMP_CMD        0x40
 186 #define DIAG_CMD        0x48
 187 #define SET_MC_CMD      0x4E
 188 #define DUMP_DATA       0x56    /* A 170 byte buffer for dump and Set-MC into. */
 189 
 190 #define TX_BUF_START    0x0100
 191 #define NUM_TX_BUFS     4
 192 #define TX_BUF_SIZE             0x0680  /* packet+header+TBD+extra (1518+14+20+16) */
 193 #define TX_BUF_END              0x2000
 194 
 195 #define RX_BUF_START    0x2000
 196 #define RX_BUF_SIZE     (0x640) /* packet+header+RBD+extra */
 197 #define RX_BUF_END              0x4000
 198 
 199 /*
 200   That's it: only 86 bytes to set up the beast, including every extra
 201   command available.  The 170 byte buffer at DUMP_DATA is shared between the
 202   Dump command (called only by the diagnostic program) and the SetMulticastList
 203   command.
 204 
 205   To complete the memory setup you only have to write the station address at
 206   SA_OFFSET and create the Tx & Rx buffer lists.
 207 
 208   The Tx command chain and buffer list is setup as follows:
 209   A Tx command table, with the data buffer pointing to...
 210   A Tx data buffer descriptor.  The packet is in a single buffer, rather than
 211      chaining together several smaller buffers.
 212   A NoOp command, which initially points to itself,
 213   And the packet data.
 214 
 215   A transmit is done by filling in the Tx command table and data buffer,
 216   re-writing the NoOp command, and finally changing the offset of the last
 217   command to point to the current Tx command.  When the Tx command is finished,
 218   it jumps to the NoOp, when it loops until the next Tx command changes the
 219   "link offset" in the NoOp.  This way the 82586 never has to go through the
 220   slow restart sequence.
 221 
 222   The Rx buffer list is set up in the obvious ring structure.  We have enough
 223   memory (and low enough interrupt latency) that we can avoid the complicated
 224   Rx buffer linked lists by alway associating a full-size Rx data buffer with
 225   each Rx data frame.
 226 
 227   I current use four transmit buffers starting at TX_BUF_START (0x0100), and
 228   use the rest of memory, from RX_BUF_START to RX_BUF_END, for Rx buffers.
 229 
 230   */
 231 
 232 static short init_words[] = {
 233         0x0000,                                 /* Set bus size to 16 bits. */
 234         0x0000,0x0000,                  /* Set control mailbox (SCB) addr. */
 235         0,0,                                    /* pad to 0x000000. */
 236         0x0001,                                 /* Status word that's cleared when init is done. */
 237         0x0008,0,0,                             /* SCB offset, (skip, skip) */
 238 
 239         0,0xf000|RX_START|CUC_START,    /* SCB status and cmd. */
 240         CONFIG_CMD,                             /* Command list pointer, points to Configure. */
 241         RX_BUF_START,                           /* Rx block list. */
 242         0,0,0,0,                                /* Error count: CRC, align, buffer, overrun. */
 243 
 244         /* 0x0018: Configure command.  Change to put MAC data with packet. */
 245         0, CmdConfigure,                /* Status, command.             */
 246         SET_SA_CMD,                             /* Next command is Set Station Addr. */
 247         0x0804,                                 /* "4" bytes of config data, 8 byte FIFO. */
 248         0x2e40,                                 /* Magic values, including MAC data location. */
 249         0,                                              /* Unused pad word. */
 250 
 251         /* 0x0024: Setup station address command. */
 252         0, CmdSASetup,
 253         SET_MC_CMD,                             /* Next command. */
 254         0xaa00,0xb000,0x0bad,   /* Station address (to be filled in) */
 255 
 256         /* 0x0030: NOP, looping back to itself.  Point to first Tx buffer to Tx. */
 257         0, CmdNOp, IDLELOOP, 0 /* pad */,
 258 
 259         /* 0x0038: A unused Time-Domain Reflectometer command. */
 260         0, CmdTDR, IDLELOOP, 0,
 261 
 262         /* 0x0040: An unused Dump State command. */
 263         0, CmdDump, IDLELOOP, DUMP_DATA,
 264 
 265         /* 0x0048: An unused Diagnose command. */
 266         0, CmdDiagnose, IDLELOOP,
 267 
 268         /* 0x004E: An empty set-multicast-list command. */
 269 #ifdef initial_text_tx
 270         0, CmdMulticastList, DUMP_DATA, 0,
 271 #else
 272         0, CmdMulticastList, IDLELOOP, 0,
 273 #endif
 274 
 275         /* 0x0056: A continuous transmit command, only here for testing. */
 276         0, CmdTx, DUMP_DATA, DUMP_DATA+8, 0x83ff, -1, DUMP_DATA, 0,
 277 };
 278 
 279 /* Index to functions, as function prototypes. */
 280 
 281 extern int express_probe(struct device *dev);   /* Called from Space.c */
 282 
 283 static int      eexp_probe1(struct device *dev, short ioaddr);
 284 static int      eexp_open(struct device *dev);
 285 static int      eexp_send_packet(struct sk_buff *skb, struct device *dev);
 286 static void     eexp_interrupt(int reg_ptr);
 287 static void eexp_rx(struct device *dev);
 288 static int      eexp_close(struct device *dev);
 289 static struct enet_statistics *eexp_get_stats(struct device *dev);
 290 static void set_multicast_list(struct device *dev, int num_addrs, void *addrs);
 291 
 292 static int read_eeprom(int ioaddr, int location);
 293 static void hardware_send_packet(struct device *dev, void *buf, short length);
 294 static void init_82586_mem(struct device *dev);
 295 static void init_rx_bufs(struct device *dev);
 296 
 297 
 298 /* Check for a network adaptor of this type, and return '0' iff one exists.
 299    If dev->base_addr == 0, probe all likely locations.
 300    If dev->base_addr == 1, always return failure.
 301    If dev->base_addr == 2, (detachable devices only) alloate space for the
 302    device and return success.
 303    */
 304 int
 305 express_probe(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 306 {
 307         /* Don't probe all settable addresses, 0x[23][0-7]0, just common ones. */
 308         int *port, ports[] = {0x300, 0x270, 0x320, 0x340, 0};
 309         int base_addr = dev->base_addr;
 310 
 311         if (base_addr > 0x1ff)  /* Check a single specified location. */
 312                 return eexp_probe1(dev, base_addr);
 313         else if (base_addr > 0)
 314                 return ENXIO;           /* Don't probe at all. */
 315 
 316         for (port = &ports[0]; *port; port++) {
 317                 short id_addr = *port + ID_PORT;
 318                 unsigned short sum = 0;
 319                 int i;
 320 #ifdef notdef
 321                 for (i = 16; i > 0; i--)
 322                         sum += inb(id_addr);
 323                 printk("EtherExpress ID checksum is %04x.\n", sum);
 324 #else
 325                 for (i = 4; i > 0; i--) {
 326                         short id_val = inb(id_addr);
 327                         sum |= (id_val >> 4) << ((id_val & 3) << 2);
 328                 }
 329 #endif
 330                 if (sum == 0xbaba
 331                         && eexp_probe1(dev, *port) == 0)
 332                         return 0;
 333         }
 334 
 335         return ENODEV;                  /* ENODEV would be more accurate. */
 336 }
 337 
 338 int eexp_probe1(struct device *dev, short ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 339 {
 340         unsigned short station_addr[3];
 341         int i;
 342 
 343         printk("%s: EtherExpress at %#x,", dev->name, ioaddr);
 344 
 345         /* The station address is stored !backwards! in the EEPROM, reverse
 346            after reading.  (Hmmm, a little brain-damage there at Intel, eh?) */
 347         station_addr[0] = read_eeprom(ioaddr, 2);
 348         station_addr[1] = read_eeprom(ioaddr, 3);
 349         station_addr[2] = read_eeprom(ioaddr, 4);
 350 
 351         /* Check the first three octets of the S.A. for the manufactor's code. */
 352         if (station_addr[2] != 0x00aa || (station_addr[1] & 0xff00) != 0x0000) {
 353                 printk(" rejected (invalid address %04x%04x%04x).\n",
 354                            station_addr[2], station_addr[1], station_addr[0]);
 355                 return ENODEV;
 356         }
 357 
 358         /* We've committed to using the board, and can start filling in *dev. */
 359         snarf_region(ioaddr, 16);
 360         dev->base_addr = ioaddr;
 361 
 362         for (i = 0; i < 6; i++) {
 363                 dev->dev_addr[i] = ((unsigned char*)station_addr)[5-i];
 364                 printk(" %02x", dev->dev_addr[i]);
 365         }
 366 
 367         /* There is no reason for the driver to care, but I print out the
 368            interface to minimize bogus bug reports. */
 369         {
 370                 char irqmap[] = {0, 9, 3, 4, 5, 10, 11, 0};
 371                 char *ifmap[] = {"AUI", "BNC", "10baseT"};
 372                 enum iftype {AUI=0, BNC=1, TP=2};
 373                 unsigned short setupval = read_eeprom(ioaddr, 0);
 374 
 375                 dev->irq = irqmap[setupval >> 13];
 376                 dev->if_port = (setupval & 0x1000) == 0 ? AUI :
 377                         read_eeprom(ioaddr, 5) & 0x1 ? TP : BNC;
 378                 printk(", IRQ %d, Interface %s.\n", dev->irq, ifmap[dev->if_port]);
 379                 /* Release the IRQ line so that it can be shared if we don't use the
 380                    ethercard. */
 381                 outb(0x00, ioaddr + SET_IRQ);
 382         }
 383 
 384         /* It's now OK to leave the board in reset, pending the open(). */
 385         outb(ASIC_RESET, ioaddr + EEPROM_Ctrl);
 386 
 387         if ((dev->mem_start & 0xf) > 0)
 388                 net_debug = dev->mem_start & 7;
 389 
 390         if (net_debug)
 391                 printk(version);
 392 
 393         /* Initialize the device structure. */
 394         dev->priv = kmalloc(sizeof(struct net_local), GFP_KERNEL);
 395         memset(dev->priv, 0, sizeof(struct net_local));
 396 
 397         dev->open               = eexp_open;
 398         dev->stop               = eexp_close;
 399         dev->hard_start_xmit = eexp_send_packet;
 400         dev->get_stats  = eexp_get_stats;
 401         dev->set_multicast_list = &set_multicast_list;
 402 
 403         /* Fill in the fields of the device structure with ethernet-generic values. */
 404         
 405         ether_setup(dev);
 406         
 407         return 0;
 408 }
 409 
 410 
 411 /* Reverse IRQ map: the value to put in the SET_IRQ reg. for IRQ<index>. */
 412 static char irqrmap[]={0,0,1,2,3,4,0,0,0,1,5,6,0,0,0,0};
 413 
 414 static int
 415 eexp_open(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 416 {
 417         int ioaddr = dev->base_addr;
 418 
 419         if (dev->irq == 0  ||  irqrmap[dev->irq] == 0)
 420                 return -ENXIO;
 421 
 422         if (irq2dev_map[dev->irq] != 0
 423                 /* This is always true, but avoid the false IRQ. */
 424                 || (irq2dev_map[dev->irq] = dev) == 0
 425                 || request_irq(dev->irq, &eexp_interrupt)) {
 426                 return -EAGAIN;
 427         }
 428 
 429         /* Initialize the 82586 memory and start it. */
 430         init_82586_mem(dev);
 431 
 432         /* Enable the interrupt line. */
 433         outb(irqrmap[dev->irq] | 0x08, ioaddr + SET_IRQ);
 434 
 435         dev->tbusy = 0;
 436         dev->interrupt = 0;
 437         dev->start = 1;
 438         return 0;
 439 }
 440 
 441 static int
 442 eexp_send_packet(struct sk_buff *skb, struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 443 {
 444         struct net_local *lp = (struct net_local *)dev->priv;
 445         int ioaddr = dev->base_addr;
 446 
 447         if (dev->tbusy) {
 448                 /* If we get here, some higher level has decided we are broken.
 449                    There should really be a "kick me" function call instead. */
 450                 int tickssofar = jiffies - dev->trans_start;
 451                 if (tickssofar < 5)
 452                         return 1;
 453                 if (net_debug > 1)
 454                         printk("%s: transmit timed out, %s?  ", dev->name,
 455                                    inw(ioaddr+SCB_STATUS) & 0x8000 ? "IRQ conflict" :
 456                                    "network cable problem");
 457                 lp->stats.tx_errors++;
 458                 /* Try to restart the adaptor. */
 459                 if (lp->last_restart == lp->stats.tx_packets) {
 460                         if (net_debug > 1) printk("Resetting board.\n");
 461                         /* Completely reset the adaptor. */
 462                         init_82586_mem(dev);
 463                 } else {
 464                         /* Issue the channel attention signal and hope it "gets better". */
 465                         if (net_debug > 1) printk("Kicking board.\n");
 466                         outw(0xf000|CUC_START|RX_START, ioaddr + SCB_CMD);
 467                         outb(0, ioaddr + SIGNAL_CA);
 468                         lp->last_restart = lp->stats.tx_packets;
 469                 }
 470                 dev->tbusy=0;
 471                 dev->trans_start = jiffies;
 472         }
 473 
 474         /* If some higher layer thinks we've missed an tx-done interrupt
 475            we are passed NULL. Caution: dev_tint() handles the cli()/sti()
 476            itself. */
 477         if (skb == NULL) {
 478                 dev_tint(dev);
 479                 return 0;
 480         }
 481 
 482         /* Block a timer-based transmit from overlapping. */
 483         if (set_bit(0, (void*)&dev->tbusy) != 0)
 484                 printk("%s: Transmitter access conflict.\n", dev->name);
 485         else {
 486                 short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
 487                 unsigned char *buf = skb->data;
 488 
 489                 /* Disable the 82586's input to the interrupt line. */
 490                 outb(irqrmap[dev->irq], ioaddr + SET_IRQ);
 491                 hardware_send_packet(dev, buf, length);
 492                 dev->trans_start = jiffies;
 493                 /* Enable the 82586 interrupt input. */
 494                 outb(0x08 | irqrmap[dev->irq], ioaddr + SET_IRQ);
 495         }
 496 
 497         if (skb->free)
 498                 kfree_skb (skb, FREE_WRITE);
 499 
 500         /* You might need to clean up and record Tx statistics here. */
 501         lp->stats.tx_aborted_errors++;
 502 
 503         return 0;
 504 }
 505 
 506 /*      The typical workload of the driver:
 507         Handle the network interface interrupts. */
 508 static void
 509 eexp_interrupt(int reg_ptr)
     /* [previous][next][first][last][top][bottom][index][help] */
 510 {
 511         int irq = -(((struct pt_regs *)reg_ptr)->orig_eax+2);
 512         struct device *dev = (struct device *)(irq2dev_map[irq]);
 513         struct net_local *lp;
 514         int ioaddr, status, boguscount = 0;
 515         short ack_cmd;
 516 
 517         if (dev == NULL) {
 518                 printk ("net_interrupt(): irq %d for unknown device.\n", irq);
 519                 return;
 520         }
 521         dev->interrupt = 1;
 522         
 523         ioaddr = dev->base_addr;
 524         lp = (struct net_local *)dev->priv;
 525         
 526         status = inw(ioaddr + SCB_STATUS);
 527         
 528     if (net_debug > 4) {
 529                 printk("%s: EExp interrupt, status %4.4x.\n", dev->name, status);
 530     }
 531 
 532         /* Disable the 82586's input to the interrupt line. */
 533         outb(irqrmap[dev->irq], ioaddr + SET_IRQ);
 534 
 535         /* Reap the Tx packet buffers. */
 536         while (lp->tx_reap != lp->tx_head) {    /* if (status & 0x8000) */
 537                 unsigned short tx_status;
 538                 outw(lp->tx_reap, ioaddr + READ_PTR);
 539                 tx_status = inw(ioaddr);
 540                 if (tx_status == 0) {
 541                         if (net_debug > 5)  printk("Couldn't reap %#x.\n", lp->tx_reap);
 542                         break;
 543                 }
 544                 if (tx_status & 0x2000) {
 545                         lp->stats.tx_packets++;
 546                         lp->stats.collisions += tx_status & 0xf;
 547                         dev->tbusy = 0;
 548                         mark_bh(INET_BH);       /* Inform upper layers. */
 549                 } else {
 550                         lp->stats.tx_errors++;
 551                         if (tx_status & 0x0600)  lp->stats.tx_carrier_errors++;
 552                         if (tx_status & 0x0100)  lp->stats.tx_fifo_errors++;
 553                         if (!(tx_status & 0x0040))  lp->stats.tx_heartbeat_errors++;
 554                         if (tx_status & 0x0020)  lp->stats.tx_aborted_errors++;
 555                 }
 556                 if (net_debug > 5)
 557                         printk("Reaped %x, Tx status %04x.\n" , lp->tx_reap, tx_status);
 558                 lp->tx_reap += TX_BUF_SIZE;
 559                 if (lp->tx_reap > TX_BUF_END - TX_BUF_SIZE)
 560                         lp->tx_reap = TX_BUF_START;
 561                 if (++boguscount > 4)
 562                         break;
 563         }
 564 
 565         if (status & 0x4000) { /* Packet received. */
 566                 if (net_debug > 5)
 567                         printk("Received packet, rx_head %04x.\n", lp->rx_head);
 568                 eexp_rx(dev);
 569         }
 570 
 571         /* Acknowledge the interrupt sources. */
 572         ack_cmd = status & 0xf000;
 573 
 574         if ((status & 0x0700) != 0x0200  &&  dev->start) {
 575                 short saved_write_ptr = inw(ioaddr + WRITE_PTR);
 576                 if (net_debug > 1)
 577                         printk("%s: Command unit stopped, status %04x, restarting.\n",
 578                                    dev->name, status);
 579                 /* If this ever occurs we must re-write the idle loop, reset
 580                    the Tx list, and do a complete restart of the command unit. */
 581                 outw(IDLELOOP, ioaddr + WRITE_PTR);
 582                 outw(0, ioaddr);
 583                 outw(CmdNOp, ioaddr);
 584                 outw(IDLELOOP, ioaddr);
 585                 outw(IDLELOOP, SCB_CBL);
 586                 lp->tx_cmd_link = IDLELOOP + 4;
 587                 lp->tx_head = lp->tx_reap = TX_BUF_START;
 588                 /* Restore the saved write pointer. */
 589                 outw(saved_write_ptr, ioaddr + WRITE_PTR);
 590                 ack_cmd |= CUC_START;
 591         }
 592 
 593         if ((status & 0x0070) != 0x0040  &&  dev->start) {
 594                 short saved_write_ptr = inw(ioaddr + WRITE_PTR);
 595                 /* The Rx unit is not ready, it must be hung.  Restart the receiver by
 596                    initializing the rx buffers, and issuing an Rx start command. */
 597                 lp->stats.rx_errors++;
 598                 if (net_debug > 1) {
 599                         int cur_rxbuf = RX_BUF_START;
 600                         printk("%s: Rx unit stopped status %04x rx head %04x tail %04x.\n",
 601                                    dev->name, status, lp->rx_head, lp->rx_tail);
 602                         while (cur_rxbuf <= RX_BUF_END - RX_BUF_SIZE) {
 603                                 int i;
 604                                 printk("  Rx buf at %04x:", cur_rxbuf);
 605                                 outw(cur_rxbuf, ioaddr + READ_PTR);
 606                                 for (i = 0; i < 0x20; i += 2)
 607                                         printk(" %04x", inw(ioaddr));
 608                                 printk(".\n");
 609                                 cur_rxbuf += RX_BUF_SIZE;
 610                         }
 611                 }
 612                 init_rx_bufs(dev);
 613                 outw(RX_BUF_START, SCB_RFA);
 614                 outw(saved_write_ptr, ioaddr + WRITE_PTR);
 615                 ack_cmd |= RX_START;
 616         }
 617 
 618         outw(ack_cmd, ioaddr + SCB_CMD);
 619         outb(0, ioaddr + SIGNAL_CA);
 620 
 621     if (net_debug > 5) {
 622                 printk("%s: EExp exiting interrupt, status %4.4x.\n", dev->name,
 623                            inw(ioaddr + SCB_CMD));
 624     }
 625         /* Enable the 82586's input to the interrupt line. */
 626         outb(irqrmap[dev->irq] | 0x08, ioaddr + SET_IRQ);
 627         return;
 628 }
 629 
 630 static int
 631 eexp_close(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 632 {
 633         int ioaddr = dev->base_addr;
 634 
 635         dev->tbusy = 1;
 636         dev->start = 0;
 637 
 638         /* Flush the Tx and disable Rx. */
 639         outw(RX_SUSPEND | CUC_SUSPEND, ioaddr + SCB_CMD);
 640         outb(0, ioaddr + SIGNAL_CA);
 641 
 642         /* Disable the physical interrupt line. */
 643         outb(0, ioaddr + SET_IRQ);
 644 
 645         free_irq(dev->irq);
 646 
 647         irq2dev_map[dev->irq] = 0;
 648 
 649         /* Update the statistics here. */
 650 
 651         return 0;
 652 }
 653 
 654 /* Get the current statistics.  This may be called with the card open or
 655    closed. */
 656 static struct enet_statistics *
 657 eexp_get_stats(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 658 {
 659         struct net_local *lp = (struct net_local *)dev->priv;
 660 
 661         /* ToDo: decide if there are any useful statistics from the SCB. */
 662 
 663         return &lp->stats;
 664 }
 665 
 666 /* Set or clear the multicast filter for this adaptor.
 667    num_addrs == -1      Promiscuous mode, receive all packets
 668    num_addrs == 0       Normal mode, clear multicast list
 669    num_addrs > 0        Multicast mode, receive normal and MC packets, and do
 670                         best-effort filtering.
 671  */
 672 static void
 673 set_multicast_list(struct device *dev, int num_addrs, void *addrs)
     /* [previous][next][first][last][top][bottom][index][help] */
 674 {
 675         short ioaddr = dev->base_addr;
 676         if (num_addrs < 0) {
 677                 /* Not written yet, this requires expanding the init_words config
 678                    cmd. */
 679         } else if (num_addrs > 0) {
 680                 /* Fill in the SET_MC_CMD with the number of address bytes, followed
 681                    by the list of multicast addresses to be accepted. */
 682                 outw(SET_MC_CMD + 6, ioaddr + WRITE_PTR);
 683                 outw(num_addrs * 6, ioaddr);
 684                 outsw(ioaddr, addrs, num_addrs*3);              /* 3 = addr len in words */
 685                 /* We must trigger a whole 586 reset due to a bug. */
 686         } else {
 687                 /* Not written yet, this requires expanding the init_words config
 688                    cmd. */
 689                 outw(99, ioaddr);               /* Disable promiscuous mode, use normal mode */
 690         }
 691 }
 692 
 693 /* The horrible routine to read a word from the serial EEPROM. */
 694 
 695 /* The delay between EEPROM clock transitions. */
 696 #define eeprom_delay()  { int _i = 40; while (--_i > 0) { __SLOW_DOWN_IO; }}
 697 #define EE_READ_CMD (6 << 6)
 698 
 699 int
 700 read_eeprom(int ioaddr, int location)
     /* [previous][next][first][last][top][bottom][index][help] */
 701 {
 702         int i;
 703         unsigned short retval = 0;
 704         short ee_addr = ioaddr + EEPROM_Ctrl;
 705         int read_cmd = location | EE_READ_CMD;
 706         short ctrl_val = EE_CS | _586_RESET;
 707         
 708         outb(ctrl_val, ee_addr);
 709         
 710         /* Shift the read command bits out. */
 711         for (i = 8; i >= 0; i--) {
 712                 short outval = (read_cmd & (1 << i)) ? ctrl_val | EE_DATA_WRITE
 713                         : ctrl_val;
 714                 outb(outval, ee_addr);
 715                 outb(outval | EE_SHIFT_CLK, ee_addr);   /* EEPROM clock tick. */
 716                 eeprom_delay();
 717                 outb(outval, ee_addr);  /* Finish EEPROM a clock tick. */
 718                 eeprom_delay();
 719         }
 720         outb(ctrl_val, ee_addr);
 721         
 722         for (i = 16; i > 0; i--) {
 723                 outb(ctrl_val | EE_SHIFT_CLK, ee_addr);  eeprom_delay();
 724                 retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0);
 725                 outb(ctrl_val, ee_addr);  eeprom_delay();
 726         }
 727 
 728         /* Terminate the EEPROM access. */
 729         ctrl_val &= ~EE_CS;
 730         outb(ctrl_val | EE_SHIFT_CLK, ee_addr);
 731         eeprom_delay();
 732         outb(ctrl_val, ee_addr);
 733         eeprom_delay();
 734         return retval;
 735 }
 736 
 737 static void
 738 init_82586_mem(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 739 {
 740         struct net_local *lp = (struct net_local *)dev->priv;
 741         short ioaddr = dev->base_addr;
 742 
 743         /* Enable loopback to protect the wire while starting up.
 744            This is Superstition From Crynwr. */
 745         outb(inb(ioaddr + Config) | 0x02, ioaddr + Config);
 746 
 747         /* Hold the 586 in reset during the memory initialization. */
 748         outb(_586_RESET, ioaddr + EEPROM_Ctrl);
 749 
 750         /* Place the write pointer at 0xfff6 (address-aliased to 0xfffff6). */
 751         outw(0xfff6, ioaddr + WRITE_PTR);
 752         outsw(ioaddr, init_words, sizeof(init_words)>>1);
 753 
 754         /* Fill in the station address. */
 755         outw(SA_OFFSET, ioaddr + WRITE_PTR);
 756         outsw(ioaddr, dev->dev_addr, 3);
 757 
 758         /* The Tx-block list is written as needed.  We just set up the values. */
 759 #ifdef initial_text_tx
 760         lp->tx_cmd_link = DUMP_DATA + 4;
 761 #else
 762         lp->tx_cmd_link = IDLELOOP + 4;
 763 #endif
 764         lp->tx_head = lp->tx_reap = TX_BUF_START;
 765 
 766         init_rx_bufs(dev);
 767 
 768         /* Start the 586 by releasing the reset line. */
 769         outb(0x00, ioaddr + EEPROM_Ctrl);
 770 
 771         /* This was time consuming to track down: you need to give two channel
 772            attention signals to reliably start up the i82586. */
 773         outb(0, ioaddr + SIGNAL_CA);
 774 
 775         {
 776                 int boguscnt = 50;
 777                 while (inw(ioaddr + SCB_STATUS) == 0)
 778                         if (--boguscnt == 0) {
 779                                 printk("%s: i82586 initialization timed out with status %04x, cmd %04x.\n",
 780                                            dev->name, inw(ioaddr + SCB_STATUS), inw(ioaddr + SCB_CMD));
 781                                 break;
 782                         }
 783                 /* Issue channel-attn -- the 82586 won't start without it. */
 784                 outb(0, ioaddr + SIGNAL_CA);
 785         }
 786 
 787         /* Disable loopback. */
 788         outb(inb(ioaddr + Config) & ~0x02, ioaddr + Config);
 789         if (net_debug > 4)
 790                 printk("%s: Initialized 82586, status %04x.\n", dev->name,
 791                            inw(ioaddr + SCB_STATUS));
 792         return;
 793 }
 794 
 795 /* Initialize the Rx-block list. */
 796 static void init_rx_bufs(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 797 {
 798         struct net_local *lp = (struct net_local *)dev->priv;
 799         short ioaddr = dev->base_addr;
 800 
 801         int cur_rxbuf = lp->rx_head = RX_BUF_START;
 802         
 803         /* Initialize each Rx frame + data buffer. */
 804         do {    /* While there is room for one more. */
 805                 outw(cur_rxbuf, ioaddr + WRITE_PTR);
 806                 outw(0x0000, ioaddr);                           /* Status */
 807                 outw(0x0000, ioaddr);                           /* Command */
 808                 outw(cur_rxbuf + RX_BUF_SIZE, ioaddr); /* Link */
 809                 outw(cur_rxbuf + 22, ioaddr);           /* Buffer offset */
 810                 outw(0xFeed, ioaddr);                           /* Pad for dest addr. */
 811                 outw(0xF00d, ioaddr);
 812                 outw(0xF001, ioaddr);
 813                 outw(0x0505, ioaddr);                           /* Pad for source addr. */
 814                 outw(0x2424, ioaddr);
 815                 outw(0x6565, ioaddr);
 816                 outw(0xdeaf, ioaddr);                           /* Pad for protocol. */
 817 
 818                 outw(0x0000, ioaddr);                           /* Buffer: Actual count */
 819                 outw(-1, ioaddr);                                       /* Buffer: Next (none). */
 820                 outw(cur_rxbuf + 0x20, ioaddr);         /* Buffer: Address low */
 821                 outw(0x0000, ioaddr);
 822                 /* Finally, the number of bytes in the buffer. */
 823                 outw(0x8000 + RX_BUF_SIZE-0x20, ioaddr);
 824                 
 825                 lp->rx_tail = cur_rxbuf;
 826                 cur_rxbuf += RX_BUF_SIZE;
 827         } while (cur_rxbuf <= RX_BUF_END - RX_BUF_SIZE);
 828         
 829         /* Terminate the list by setting the EOL bit, and wrap the pointer to make
 830            the list a ring. */
 831         outw(lp->rx_tail + 2, ioaddr + WRITE_PTR);
 832         outw(0xC000, ioaddr);                                   /* Command, mark as last. */
 833         outw(lp->rx_head, ioaddr);                              /* Link */
 834 }
 835 
 836 static void
 837 hardware_send_packet(struct device *dev, void *buf, short length)
     /* [previous][next][first][last][top][bottom][index][help] */
 838 {
 839         struct net_local *lp = (struct net_local *)dev->priv;
 840         short ioaddr = dev->base_addr;
 841         short tx_block = lp->tx_head;
 842 
 843         /* Set the write pointer to the Tx block, and put out the header. */
 844         outw(tx_block, ioaddr + WRITE_PTR);
 845         outw(0x0000, ioaddr);           /* Tx status */
 846         outw(CMD_INTR|CmdTx, ioaddr);           /* Tx command */
 847         outw(tx_block+16, ioaddr);      /* Next command is a NoOp. */
 848         outw(tx_block+8, ioaddr);       /* Data Buffer offset. */
 849 
 850         /* Output the data buffer descriptor. */
 851         outw(length | 0x8000, ioaddr); /* Byte count parameter. */
 852         outw(-1, ioaddr);                       /* No next data buffer. */
 853         outw(tx_block+22, ioaddr);      /* Buffer follows the NoOp command. */
 854         outw(0x0000, ioaddr);           /* Buffer address high bits (always zero). */
 855 
 856         /* Output the Loop-back NoOp command. */
 857         outw(0x0000, ioaddr);           /* Tx status */
 858         outw(CmdNOp, ioaddr);           /* Tx command */
 859         outw(tx_block+16, ioaddr);      /* Next is myself. */
 860 
 861         /* Output the packet using the write pointer.
 862            Hmmm, it feels a little like a 3c501! */
 863         outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
 864 
 865         /* Set the old command link pointing to this send packet. */
 866         outw(lp->tx_cmd_link, ioaddr + WRITE_PTR);
 867         outw(tx_block, ioaddr);
 868         lp->tx_cmd_link = tx_block + 20;
 869 
 870         /* Set the next free tx region. */
 871         lp->tx_head = tx_block + TX_BUF_SIZE;
 872         if (lp->tx_head > TX_BUF_END - TX_BUF_SIZE)
 873                 lp->tx_head = TX_BUF_START;
 874 
 875     if (net_debug > 4) {
 876                 printk("%s: EExp @%x send length = %d, tx_block %3x, next %3x, "
 877                            "reap %4x status %4.4x.\n", dev->name, ioaddr, length,
 878                            tx_block, lp->tx_head, lp->tx_reap, inw(ioaddr + SCB_STATUS));
 879     }
 880 
 881         if (lp->tx_head != lp->tx_reap)
 882                 dev->tbusy = 0;
 883 }
 884 
 885 static void
 886 eexp_rx(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 887 {
 888         struct net_local *lp = (struct net_local *)dev->priv;
 889         short ioaddr = dev->base_addr;
 890         short saved_write_ptr = inw(ioaddr + WRITE_PTR);
 891         short rx_head = lp->rx_head;
 892         short rx_tail = lp->rx_tail;
 893         short boguscount = 10;
 894         short frame_status;
 895 
 896         /* Set the read pointer to the Rx frame. */
 897         outw(rx_head, ioaddr + READ_PTR);
 898         while ((frame_status = inw(ioaddr)) < 0) {              /* Command complete */
 899                 short rfd_cmd = inw(ioaddr);
 900                 short next_rx_frame = inw(ioaddr);
 901                 short data_buffer_addr = inw(ioaddr);
 902                 short pkt_len;
 903                 
 904                 /* Set the read pointer the data buffer. */
 905                 outw(data_buffer_addr, ioaddr + READ_PTR);
 906                 pkt_len = inw(ioaddr);
 907 
 908                 if (rfd_cmd != 0  ||  data_buffer_addr != rx_head + 22
 909                         ||  pkt_len & 0xC000 != 0xC000) {
 910                         printk("%s: Rx frame at %#x corrupted, status %04x cmd %04x"
 911                                    "next %04x data-buf @%04x %04x.\n", dev->name, rx_head,
 912                                    frame_status, rfd_cmd, next_rx_frame, data_buffer_addr,
 913                                    pkt_len);
 914                 } else if ((frame_status & 0x2000) == 0) {
 915                         /* Frame Rxed, but with error. */
 916                         lp->stats.rx_errors++;
 917                         if (frame_status & 0x0800) lp->stats.rx_crc_errors++;
 918                         if (frame_status & 0x0400) lp->stats.rx_frame_errors++;
 919                         if (frame_status & 0x0200) lp->stats.rx_fifo_errors++;
 920                         if (frame_status & 0x0100) lp->stats.rx_over_errors++;
 921                         if (frame_status & 0x0080) lp->stats.rx_length_errors++;
 922                 } else {
 923                         /* Malloc up new buffer. */
 924                         struct sk_buff *skb;
 925 
 926                         pkt_len &= 0x3fff;
 927                         skb = alloc_skb(pkt_len, GFP_ATOMIC);
 928                         if (skb == NULL) {
 929                                 printk("%s: Memory squeeze, dropping packet.\n", dev->name);
 930                                 lp->stats.rx_dropped++;
 931                                 break;
 932                         }
 933                         skb->len = pkt_len;
 934                         skb->dev = dev;
 935 
 936                         outw(data_buffer_addr + 10, ioaddr + READ_PTR);
 937 
 938                         insw(ioaddr, skb->data, (pkt_len + 1) >> 1);
 939                 
 940                         netif_rx(skb);
 941                         lp->stats.rx_packets++;
 942                 }
 943 
 944                 /* Clear the status word and set End-of-List on the rx frame. */
 945                 outw(rx_head, ioaddr + WRITE_PTR);
 946                 outw(0x0000, ioaddr);
 947                 outw(0xC000, ioaddr);
 948 #ifndef final_version
 949                 if (next_rx_frame != rx_head + RX_BUF_SIZE
 950                         && next_rx_frame != RX_BUF_START) {
 951                         printk("%s: Rx next frame at %#x is %#x instead of %#x.\n", dev->name,
 952                                    rx_head, next_rx_frame, rx_head + RX_BUF_SIZE);
 953                         next_rx_frame = rx_head + RX_BUF_SIZE;
 954                         if (next_rx_frame >= RX_BUF_END - RX_BUF_SIZE)
 955                                 next_rx_frame = RX_BUF_START;
 956                 }
 957 #endif
 958                 outw(rx_tail+2, ioaddr + WRITE_PTR);
 959                 outw(0x0000, ioaddr);   /* Clear the end-of-list on the prev. RFD. */
 960 
 961 #ifndef final_version
 962                 outw(rx_tail+4, ioaddr + READ_PTR);
 963                 if (inw(ioaddr) != rx_head) {
 964                         printk("%s: Rx buf link mismatch, at %04x link %04x instead of %04x.\n",
 965                                    dev->name, rx_tail, (outw(rx_tail+4, ioaddr + READ_PTR),inw(ioaddr)),
 966                                    rx_head);
 967                         outw(rx_head, ioaddr);
 968                 }
 969 #endif
 970 
 971                 rx_tail = rx_head;
 972                 rx_head = next_rx_frame;
 973                 if (--boguscount == 0)
 974                         break;
 975                 outw(rx_head, ioaddr + READ_PTR);
 976         }
 977         
 978         lp->rx_head = rx_head;
 979         lp->rx_tail = rx_tail;
 980         
 981         /* Restore the original write pointer. */
 982         outw(saved_write_ptr, ioaddr + WRITE_PTR);
 983 }
 984 
 985 /*
 986  * Local variables:
 987  *  compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -I/usr/src/linux/drivers/net -Wall -Wstrict-prototypes -O6 -m486 -c eexpress.c"
 988  *  version-control: t
 989  *  kept-new-versions: 5
 990  *  tab-width: 4
 991  * End:
 992  */

/* [previous][next][first][last][top][bottom][index][help] */