tag | line | file | source code |
outb | 259 | drivers/block/cdu31a.c | outb(SONY_DRIVE_RESET_BIT, sony_cd_control_reg); |
outb | 265 | drivers/block/cdu31a.c | outb(SONY_ATTN_CLR_BIT, sony_cd_control_reg); |
outb | 271 | drivers/block/cdu31a.c | outb(SONY_RES_RDY_CLR_BIT, sony_cd_control_reg); |
outb | 277 | drivers/block/cdu31a.c | outb(SONY_DATA_RDY_CLR_BIT, sony_cd_control_reg); |
outb | 283 | drivers/block/cdu31a.c | outb(SONY_PARAM_CLR_BIT, sony_cd_control_reg); |
outb | 307 | drivers/block/cdu31a.c | outb(param, sony_cd_param_reg); |
outb | 313 | drivers/block/cdu31a.c | outb(cmd, sony_cd_cmd_reg); |
outb | 314 | drivers/block/cdu31a.c | outb(SONY_RES_RDY_INT_EN_BIT, sony_cd_control_reg); |
outb | 1793 | drivers/block/cdu31a.c | outb(0xbc, 0x9a01); |
outb | 1794 | drivers/block/cdu31a.c | outb(0xe2, 0x9a01); |
outb | 314 | drivers/block/floppy.c | outb(current_DOR,FD_DOR); |
outb | 339 | drivers/block/floppy.c | outb(current_DOR,FD_DOR); |
outb | 365 | drivers/block/floppy.c | outb(current_DOR,FD_DOR); |
outb | 482 | drivers/block/floppy.c | outb(byte,FD_DATA); |
outb | 883 | drivers/block/floppy.c | outb(current_DOR, FD_DOR); |
outb | 1353 | drivers/block/floppy.c | outb(current_DOR,FD_DOR); |
outb | 233 | drivers/block/hd.c | outb(hd_info[0].ctl & 0x0f ,HD_CMD); |
outb | 144 | drivers/block/mcd.c | outb(MCMD_GET_STATUS, MCDPORT(0)); /* send get-status cmd */ |
outb | 226 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 238 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 310 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 453 | drivers/block/mcd.c | outb(MCMD_SET_VOLUME, MCDPORT(0)); |
outb | 454 | drivers/block/mcd.c | outb(volctrl.channel0, MCDPORT(0)); |
outb | 455 | drivers/block/mcd.c | outb(0, MCDPORT(0)); |
outb | 456 | drivers/block/mcd.c | outb(volctrl.channel1, MCDPORT(0)); |
outb | 457 | drivers/block/mcd.c | outb(1, MCDPORT(0)); |
outb | 473 | drivers/block/mcd.c | outb(0xF8, MCDPORT(0)); |
outb | 482 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 488 | drivers/block/mcd.c | outb(MCMD_EJECT, MCDPORT(0)); |
outb | 602 | drivers/block/mcd.c | outb(0x40, MCDPORT(0)); /* get status */ |
outb | 647 | drivers/block/mcd.c | outb(0x50, MCDPORT(0)); /* set mode */ |
outb | 648 | drivers/block/mcd.c | outb(0x01, MCDPORT(0)); /* mode = cooked data */ |
outb | 846 | drivers/block/mcd.c | outb(0, MCDPORT(1)); /* send reset */ |
outb | 850 | drivers/block/mcd.c | outb(0x40, MCDPORT(0)); /* send get-stat cmd */ |
outb | 862 | drivers/block/mcd.c | outb(MCMD_GET_VERSION,MCDPORT(0)); |
outb | 880 | drivers/block/mcd.c | outb(4,MCDPORT(2)); /* magic happens */ |
outb | 958 | drivers/block/mcd.c | outb(cmd, MCDPORT(0)); |
outb | 959 | drivers/block/mcd.c | outb(params -> start.min, MCDPORT(0)); |
outb | 960 | drivers/block/mcd.c | outb(params -> start.sec, MCDPORT(0)); |
outb | 961 | drivers/block/mcd.c | outb(params -> start.frame, MCDPORT(0)); |
outb | 962 | drivers/block/mcd.c | outb(params -> end.min, MCDPORT(0)); |
outb | 963 | drivers/block/mcd.c | outb(params -> end.sec, MCDPORT(0)); |
outb | 964 | drivers/block/mcd.c | outb(params -> end.frame, MCDPORT(0)); |
outb | 1069 | drivers/block/mcd.c | outb(MCMD_GET_Q_CHANNEL, MCDPORT(0)); |
outb | 1124 | drivers/block/mcd.c | outb(MCMD_GET_DISK_INFO, MCDPORT(0)); |
outb | 1180 | drivers/block/mcd.c | outb(MCMD_STOP, MCDPORT(0)); |
outb | 1190 | drivers/block/mcd.c | outb(MCMD_SET_MODE, MCDPORT(0)); |
outb | 1191 | drivers/block/mcd.c | outb(0x05, MCDPORT(0)); /* mode: toc */ |
outb | 1220 | drivers/block/mcd.c | outb(MCMD_SET_MODE, MCDPORT(0)); |
outb | 1221 | drivers/block/mcd.c | outb(0x01, MCDPORT(0)); |
outb | 388 | drivers/block/xd.c | outb(0,XD_CONTROL); /* acknowledge interrupt */ |
outb | 452 | drivers/block/xd.c | outb(0,XD_SELECT); |
outb | 453 | drivers/block/xd.c | outb(mode,XD_CONTROL); |
outb | 468 | drivers/block/xd.c | outb(outdata ? *outdata++ : 0,XD_DATA); |
outb | 482 | drivers/block/xd.c | outb(command ? *command++ : 0,XD_DATA); |
outb | 533 | drivers/block/xd.c | outb(0,XD_RESET); /* reset the controller */ |
outb | 616 | drivers/block/xd.c | outb(0,XD_RESET); /* reset the controller */ |
outb | 650 | drivers/block/xd.c | outb(0,XD_RESET); /* reset the controller */ |
outb | 38 | drivers/char/atixlmouse.c | #define ATIXL_MSE_DISABLE_UPDATE() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \ |
outb | 39 | drivers/char/atixlmouse.c | outb( (0x20 | inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); } |
outb | 42 | drivers/char/atixlmouse.c | #define ATIXL_MSE_ENABLE_UPDATE() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \ |
outb | 43 | drivers/char/atixlmouse.c | outb( (0xdf & inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); } |
outb | 46 | drivers/char/atixlmouse.c | #define ATIXL_MSE_INT_OFF() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \ |
outb | 47 | drivers/char/atixlmouse.c | outb( (0xe7 & inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); } |
outb | 50 | drivers/char/atixlmouse.c | #define ATIXL_MSE_INT_ON() { outb( 0x07, ATIXL_MSE_CONTROL_PORT ); \ |
outb | 51 | drivers/char/atixlmouse.c | outb( (0x08 | inb( ATIXL_MSE_DATA_PORT )), ATIXL_MSE_DATA_PORT ); } |
outb | 71 | drivers/char/atixlmouse.c | outb(ATIXL_MSE_READ_X, ATIXL_MSE_CONTROL_PORT); /* Select IR1 - X movement */ |
outb | 73 | drivers/char/atixlmouse.c | outb(ATIXL_MSE_READ_Y, ATIXL_MSE_CONTROL_PORT); /* Select IR2 - Y movement */ |
outb | 75 | drivers/char/atixlmouse.c | outb(ATIXL_MSE_READ_BUTTONS, ATIXL_MSE_CONTROL_PORT); /* Select IR0 - Button Status */ |
outb | 187 | drivers/char/atixlmouse.c | outb(0x80, ATIXL_MSE_CONTROL_PORT); /* Reset the Inport device */ |
outb | 188 | drivers/char/atixlmouse.c | outb(0x07, ATIXL_MSE_CONTROL_PORT); /* Select Internal Register 7 */ |
outb | 189 | drivers/char/atixlmouse.c | outb(0x0a, ATIXL_MSE_DATA_PORT); /* Data Interrupts 8+, 1=30hz, 2=50hz, 3=100hz, 4=200hz rate */ |
outb | 52 | drivers/char/busmouse.c | outb(MSE_READ_X_LOW, MSE_CONTROL_PORT); |
outb | 54 | drivers/char/busmouse.c | outb(MSE_READ_X_HIGH, MSE_CONTROL_PORT); |
outb | 56 | drivers/char/busmouse.c | outb(MSE_READ_Y_LOW, MSE_CONTROL_PORT ); |
outb | 58 | drivers/char/busmouse.c | outb(MSE_READ_Y_HIGH, MSE_CONTROL_PORT); |
outb | 220 | drivers/char/busmouse.c | outb(MSE_CONFIG_BYTE, MSE_CONFIG_PORT); |
outb | 221 | drivers/char/busmouse.c | outb(MSE_SIGNATURE_BYTE, MSE_SIGNATURE_PORT); |
outb | 228 | drivers/char/busmouse.c | outb(MSE_DEFAULT_MODE, MSE_CONFIG_PORT); |
outb | 141 | drivers/char/keyboard.c | outb(c,0x64); |
outb | 869 | drivers/char/keyboard.c | outb(0xfe,0x64); /* pulse reset low */ |
outb | 150 | drivers/char/mem.c | outb(get_fs_byte(tmp),i); |
outb | 49 | drivers/char/msbusmouse.c | outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); |
outb | 50 | drivers/char/msbusmouse.c | outb((inb(MS_MSE_DATA_PORT) | 0x20), MS_MSE_DATA_PORT); |
outb | 52 | drivers/char/msbusmouse.c | outb(MS_MSE_READ_X, MS_MSE_CONTROL_PORT); |
outb | 55 | drivers/char/msbusmouse.c | outb(MS_MSE_READ_Y, MS_MSE_CONTROL_PORT); |
outb | 58 | drivers/char/msbusmouse.c | outb(MS_MSE_READ_BUTTONS, MS_MSE_CONTROL_PORT); |
outb | 61 | drivers/char/msbusmouse.c | outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); |
outb | 62 | drivers/char/msbusmouse.c | outb((inb(MS_MSE_DATA_PORT) & 0xdf), MS_MSE_DATA_PORT); |
outb | 93 | drivers/char/msbusmouse.c | outb(MS_MSE_START, MS_MSE_CONTROL_PORT); |
outb | 221 | drivers/char/serial.c | outb(info->hub6 - 1 + offset, info->port); |
outb | 232 | drivers/char/serial.c | outb(info->hub6 - 1 + offset, info->port); |
outb | 247 | drivers/char/serial.c | outb(info->hub6 - 1 + offset, info->port); |
outb | 248 | drivers/char/serial.c | outb(value, info->port+1); |
outb | 251 | drivers/char/serial.c | outb(value, info->port+offset); |
outb | 259 | drivers/char/serial.c | outb(info->hub6 - 1 + offset, info->port); |
outb | 264 | drivers/char/serial.c | outb(value, info->port+offset); |
outb | 84 | drivers/char/vt.c | outb(inb_p(0x61)&0xFC, 0x61); |
outb | 102 | drivers/char/vt.c | outb((count >> 8) & 0xff, 0x42); |
outb | 171 | drivers/net/3c501.c | outb(AX_LOOP + 1, AX_CMD); |
outb | 173 | drivers/net/3c501.c | outb(0x00, AX_CMD); |
outb | 184 | drivers/net/3c501.c | outb(AX_RESET+AX_LOOP, AX_CMD); /* Loopback mode. */ |
outb | 228 | drivers/net/3c501.c | outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ |
outb | 254 | drivers/net/3c501.c | outb(TX_NORM, TX_CMD); |
outb | 255 | drivers/net/3c501.c | outb(RX_NORM, RX_CMD); |
outb | 256 | drivers/net/3c501.c | outb(AX_OFF, AX_CMD); /* Just trigger a false interrupt. */ |
outb | 258 | drivers/net/3c501.c | outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */ |
outb | 281 | drivers/net/3c501.c | outb(AX_SYS, AX_CMD); |
outb | 284 | drivers/net/3c501.c | outb(0x00, RX_BUF_CLR); /* Set rx packet area to 0. */ |
outb | 288 | drivers/net/3c501.c | outb(AX_XMIT, AX_CMD); /* Trigger xmit. */ |
outb | 343 | drivers/net/3c501.c | outb(AX_SYS, AX_CMD); |
outb | 348 | drivers/net/3c501.c | outb(AX_SYS, AX_CMD); |
outb | 350 | drivers/net/3c501.c | outb(AX_XMIT, AX_CMD); |
outb | 386 | drivers/net/3c501.c | outb(AX_RX, AX_CMD); |
outb | 387 | drivers/net/3c501.c | outb(0x00, RX_BUF_CLR); |
outb | 414 | drivers/net/3c501.c | outb(AX_SYS, AX_CMD); |
outb | 439 | drivers/net/3c501.c | outb(AX_RESET, AX_CMD); /* Reset the chip */ |
outb | 440 | drivers/net/3c501.c | outb(AX_LOOP, AX_CMD); /* Aux control, irq and loopback enabled */ |
outb | 444 | drivers/net/3c501.c | outb(dev->dev_addr[i], el_base + i); |
outb | 447 | drivers/net/3c501.c | outb(0, RX_BUF_CLR); /* Set rx packet area to 0. */ |
outb | 449 | drivers/net/3c501.c | outb(TX_NORM, TX_CMD); /* tx irq on done, collision */ |
outb | 450 | drivers/net/3c501.c | outb(RX_NORM, RX_CMD); /* Set Rx commands. */ |
outb | 471 | drivers/net/3c501.c | outb(AX_RESET, AX_CMD); /* Reset the chip */ |
outb | 496 | drivers/net/3c501.c | outb(RX_MULT, RX_CMD); |
outb | 499 | drivers/net/3c501.c | outb(RX_PROM, RX_CMD); |
outb | 502 | drivers/net/3c501.c | outb(RX_NORM, RX_CMD); |
outb | 137 | drivers/net/3c503.c | outb(ECNTRL_SAPROM|ECNTRL_THIN, ioaddr + 0x406); |
outb | 146 | drivers/net/3c503.c | outb(saved_406, ioaddr + 0x406); |
outb | 156 | drivers/net/3c503.c | outb(ECNTRL_THIN, ioaddr + 0x406); |
outb | 160 | drivers/net/3c503.c | outb(EGACFR_NORM, ioaddr + 0x405); /* Enable RAM */ |
outb | 248 | drivers/net/3c503.c | outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ |
outb | 261 | drivers/net/3c503.c | outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ |
outb | 279 | drivers/net/3c503.c | outb(EGACFR_IRQOFF, E33G_GACFR); /* disable interrupts. */ |
outb | 314 | drivers/net/3c503.c | outb(ei_status.rx_start_page, E33G_STARTPG); |
outb | 315 | drivers/net/3c503.c | outb(ei_status.stop_page, E33G_STOPPG); |
outb | 318 | drivers/net/3c503.c | outb(0xff, E33G_VP2); /* Point at the ROM restart location 0xffff0 */ |
outb | 319 | drivers/net/3c503.c | outb(0xff, E33G_VP1); |
outb | 320 | drivers/net/3c503.c | outb(0x00, E33G_VP0); |
outb | 324 | drivers/net/3c503.c | outb(EGACFR_NORM, E33G_GACFR); |
outb | 344 | drivers/net/3c503.c | outb(EGACFR_NORM, E33G_GACFR); /* Enable RAM and interrupts. */ |
outb | 357 | drivers/net/3c503.c | outb(0x00, E33G_DMAAL); |
outb | 373 | drivers/net/3c503.c | outb(buf[i], E33G_FIFOH); |
outb | 402 | drivers/net/3c503.c | outb(ring_offset & 0xff, E33G_DMAAL); |
outb | 302 | drivers/net/3c507.c | outb(0x00, ID_PORT); |
outb | 304 | drivers/net/3c507.c | outb(lrs_state, ID_PORT); |
outb | 309 | drivers/net/3c507.c | outb(0x00, ID_PORT); |
outb | 357 | drivers/net/3c507.c | outb(0x01, ioaddr + MISC_CTRL); |
outb | 452 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ |
outb | 475 | drivers/net/3c507.c | outb(0x80, ioaddr + MISC_CTRL); |
outb | 479 | drivers/net/3c507.c | outb(0x84, ioaddr + MISC_CTRL); |
outb | 519 | drivers/net/3c507.c | outb(0x80, ioaddr + MISC_CTRL); |
outb | 582 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); /* Issue channel-attn. */ |
outb | 585 | drivers/net/3c507.c | outb(0, ioaddr + RESET_IRQ); |
outb | 588 | drivers/net/3c507.c | outb(0x84, ioaddr + MISC_CTRL); |
outb | 604 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 607 | drivers/net/3c507.c | outb(0x80, ioaddr + MISC_CTRL); |
outb | 687 | drivers/net/3c507.c | outb(0x20, ioaddr + MISC_CTRL); |
outb | 710 | drivers/net/3c507.c | outb(0xA0, ioaddr + MISC_CTRL); |
outb | 714 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 726 | drivers/net/3c507.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 730 | drivers/net/3c507.c | outb(0x84, ioaddr + MISC_CTRL); |
outb | 138 | drivers/net/3c509.c | outb(0x00, ID_PORT); |
outb | 139 | drivers/net/3c509.c | outb(0x00, ID_PORT); |
outb | 141 | drivers/net/3c509.c | outb(lrs_state, ID_PORT); |
outb | 148 | drivers/net/3c509.c | outb(0xd0, ID_PORT); |
outb | 150 | drivers/net/3c509.c | outb(0xd8, ID_PORT); |
outb | 179 | drivers/net/3c509.c | outb(0xd0 + ++current_tag, ID_PORT); |
outb | 182 | drivers/net/3c509.c | outb(0xff, ID_PORT); |
outb | 247 | drivers/net/3c509.c | outb(EEPROM_READ + index, ID_PORT); |
outb | 291 | drivers/net/3c509.c | outb(dev->dev_addr[i], ioaddr + i); |
outb | 405 | drivers/net/3c509.c | outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */ |
outb | 179 | drivers/net/8390.c | outb(0x00, e8390_base + EN0_IMR); |
outb | 428 | drivers/net/8390.c | outb(ei_local->current_page-1, e8390_base+EN0_BOUNDARY); |
outb | 476 | drivers/net/8390.c | outb(next_frame-1, e8390_base+EN0_BOUNDARY); |
outb | 222 | drivers/net/at1700.c | outb(0xe0, ioaddr + 7); |
outb | 224 | drivers/net/at1700.c | outb(dev->dev_addr[i], ioaddr + 8 + i); |
outb | 227 | drivers/net/at1700.c | outb(0xe4, ioaddr + 7); |
outb | 229 | drivers/net/at1700.c | outb(0x00, ioaddr + 8 + i); |
outb | 233 | drivers/net/at1700.c | outb(0xda, ioaddr + CONFIG_0); |
outb | 236 | drivers/net/at1700.c | outb(0xe8, ioaddr + 7); |
outb | 237 | drivers/net/at1700.c | outb(dev->if_port, MODE13); |
outb | 240 | drivers/net/at1700.c | outb(0x00, ioaddr + CONFIG_1); |
outb | 270 | drivers/net/at1700.c | outb(ctrl_val, ee_addr); |
outb | 275 | drivers/net/at1700.c | outb(dataval, ee_daddr); |
outb | 276 | drivers/net/at1700.c | outb(EE_CS | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */ |
outb | 278 | drivers/net/at1700.c | outb(EE_CS, ee_addr); /* Finish EEPROM a clock tick. */ |
outb | 281 | drivers/net/at1700.c | outb(EE_CS, ee_addr); |
outb | 284 | drivers/net/at1700.c | outb(EE_CS | EE_SHIFT_CLK, ee_addr); |
outb | 287 | drivers/net/at1700.c | outb(EE_CS, ee_addr); |
outb | 293 | drivers/net/at1700.c | outb(ctrl_val | EE_SHIFT_CLK, ee_addr); |
outb | 295 | drivers/net/at1700.c | outb(ctrl_val, ee_addr); |
outb | 309 | drivers/net/at1700.c | outb(0xe0, ioaddr + CONFIG_1); |
outb | 313 | drivers/net/at1700.c | outb(dev->dev_addr[i], ioaddr + 8 + i); |
outb | 316 | drivers/net/at1700.c | outb(0xe4, ioaddr + 7); |
outb | 318 | drivers/net/at1700.c | outb(0x00, ioaddr + 8 + i); |
outb | 322 | drivers/net/at1700.c | outb(0xda, ioaddr + CONFIG_0); |
outb | 325 | drivers/net/at1700.c | outb(0x5a, ioaddr + CONFIG_0); |
outb | 327 | drivers/net/at1700.c | outb(0xe8, ioaddr + CONFIG_1); |
outb | 330 | drivers/net/at1700.c | outb(0x00, ioaddr + TX_INTR); |
outb | 331 | drivers/net/at1700.c | outb(0x81, ioaddr + RX_INTR); |
outb | 388 | drivers/net/at1700.c | outb(0x00, ioaddr + TX_INTR); |
outb | 398 | drivers/net/at1700.c | outb(0x80 | lp->tx_queue, ioaddr + TX_START); |
outb | 407 | drivers/net/at1700.c | outb(0x82, ioaddr + TX_INTR); |
outb | 446 | drivers/net/at1700.c | outb(0x80 | lp->tx_queue, ioaddr + TX_START); |
outb | 455 | drivers/net/at1700.c | outb(0x00, ioaddr + TX_INTR); |
outb | 480 | drivers/net/at1700.c | outb(0x05, ioaddr + 14); |
outb | 499 | drivers/net/at1700.c | outb(0x05, ioaddr + 14); |
outb | 507 | drivers/net/at1700.c | outb(0x05, ioaddr + 14); |
outb | 539 | drivers/net/at1700.c | outb(0x05, ioaddr + 14); |
outb | 561 | drivers/net/at1700.c | outb(0xda, ioaddr + CONFIG_0); |
outb | 566 | drivers/net/at1700.c | outb(0x00, ioaddr + CONFIG_1); |
outb | 168 | drivers/net/atp.c | outb(0x57, ioaddr + PAR_DATA); |
outb | 182 | drivers/net/atp.c | outb(0xff, ioaddr + PAR_DATA); |
outb | 187 | drivers/net/atp.c | outb(0x04, ioaddr + PAR_CONTROL); |
outb | 194 | drivers/net/atp.c | outb(saved_ctrl_reg, ioaddr + PAR_CONTROL); |
outb | 199 | drivers/net/atp.c | outb(saved_ctrl_reg, ioaddr + PAR_CONTROL); |
outb | 359 | drivers/net/atp.c | outb(Ctrl_SelData + Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 383 | drivers/net/atp.c | outb(EOC+MAR, ioaddr + PAR_DATA); |
outb | 386 | drivers/net/atp.c | outb(WrAddr+MAR, ioaddr + PAR_DATA); |
outb | 394 | drivers/net/atp.c | outb(Ctrl_LNibWrite + Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 395 | drivers/net/atp.c | outb(WrAddr+MAR, ioaddr + PAR_DATA); |
outb | 397 | drivers/net/atp.c | outb((outbyte & 0x0f)|0x40, ioaddr + PAR_DATA); |
outb | 398 | drivers/net/atp.c | outb(outbyte & 0x0f, ioaddr + PAR_DATA); |
outb | 400 | drivers/net/atp.c | outb(outbyte & 0x0f, ioaddr + PAR_DATA); |
outb | 401 | drivers/net/atp.c | outb(Ctrl_HNibWrite + Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 406 | drivers/net/atp.c | outb(0xff, ioaddr + PAR_DATA); |
outb | 407 | drivers/net/atp.c | outb(Ctrl_HNibWrite | Ctrl_SelData | Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 501 | drivers/net/atp.c | outb(Ctrl_SelData, ioaddr + PAR_CONTROL); |
outb | 590 | drivers/net/atp.c | outb(Ctrl_SelData + Ctrl_IRQEN, ioaddr + PAR_CONTROL); |
outb | 614 | drivers/net/atp.c | outb(EOC+MAR, ioaddr + PAR_DATA); |
outb | 664 | drivers/net/atp.c | outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL); |
outb | 665 | drivers/net/atp.c | outb(length == 8 ? RdAddr | HNib | MAR : RdAddr | MAR, |
outb | 676 | drivers/net/atp.c | outb(EOC+HNib+MAR, ioaddr + PAR_DATA); |
outb | 677 | drivers/net/atp.c | outb(Ctrl_SelData, ioaddr + PAR_CONTROL); |
outb | 695 | drivers/net/atp.c | outb(0x00, ioaddr + PAR_CONTROL); |
outb | 96 | drivers/net/atp.h | outb(EOC+offset, port + PAR_DATA); |
outb | 97 | drivers/net/atp.h | outb(RdAddr+offset, port + PAR_DATA); |
outb | 100 | drivers/net/atp.h | outb(EOC+offset, port + PAR_DATA); |
outb | 111 | drivers/net/atp.h | outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL); |
outb | 114 | drivers/net/atp.h | outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL); |
outb | 125 | drivers/net/atp.h | outb(Ctrl_LNibRead, ioaddr + PAR_CONTROL); |
outb | 128 | drivers/net/atp.h | outb(Ctrl_HNibRead, ioaddr + PAR_CONTROL); |
outb | 138 | drivers/net/atp.h | outb(RdAddr | MAR, ioaddr + PAR_DATA); |
outb | 140 | drivers/net/atp.h | outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA); |
outb | 149 | drivers/net/atp.h | outb(RdAddr | MAR, ioaddr + PAR_DATA); |
outb | 152 | drivers/net/atp.h | outb(RdAddr | HNib | MAR, ioaddr + PAR_DATA); |
outb | 161 | drivers/net/atp.h | outb(EOC | reg, port + PAR_DATA); |
outb | 163 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 164 | drivers/net/atp.h | outb(outval, port + PAR_DATA); /* Double write for PS/2. */ |
outb | 168 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 170 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 171 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 173 | drivers/net/atp.h | outb(EOC | outval, port + PAR_DATA); |
outb | 181 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 183 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 184 | drivers/net/atp.h | outb(outval, port + PAR_DATA); /* Double write for PS/2. */ |
outb | 187 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 189 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 190 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 192 | drivers/net/atp.h | outb(EOC | HNib | outval, port + PAR_DATA); |
outb | 200 | drivers/net/atp.h | outb(EOC | reg, port + PAR_DATA); /* Reset the address register. */ |
outb | 202 | drivers/net/atp.h | outb(outval, port + PAR_DATA); |
outb | 203 | drivers/net/atp.h | outb(outval, port + PAR_DATA); /* Double write for PS/2. */ |
outb | 205 | drivers/net/atp.h | outb((outval & 0xf0) | (value & 0x0f), port + PAR_DATA); |
outb | 206 | drivers/net/atp.h | outb(value & 0x0f, port + PAR_DATA); |
outb | 208 | drivers/net/atp.h | outb(value, port + PAR_DATA); |
outb | 209 | drivers/net/atp.h | outb(0x10 | value, port + PAR_DATA); |
outb | 210 | drivers/net/atp.h | outb(0x10 | value, port + PAR_DATA); |
outb | 212 | drivers/net/atp.h | outb(EOC | value, port + PAR_DATA); /* Reset the address register. */ |
outb | 224 | drivers/net/atp.h | outb(value & 0x0f, ioaddr + PAR_DATA); |
outb | 225 | drivers/net/atp.h | outb((value>>4) | 0x10, ioaddr + PAR_DATA); |
outb | 230 | drivers/net/atp.h | outb(value & 0x0f, ioaddr + PAR_DATA); |
outb | 231 | drivers/net/atp.h | outb(Ctrl_IRQEN | Ctrl_LNibWrite, ioaddr + PAR_CONTROL); |
outb | 232 | drivers/net/atp.h | outb((value>>4) | 0x10, ioaddr + PAR_DATA); |
outb | 233 | drivers/net/atp.h | outb(Ctrl_IRQEN | Ctrl_HNibWrite, ioaddr + PAR_CONTROL); |
outb | 239 | drivers/net/atp.h | outb(value & 0x0f, ioaddr + PAR_DATA); |
outb | 241 | drivers/net/atp.h | outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA); |
outb | 243 | drivers/net/atp.h | outb(value & 0x0f, ioaddr + PAR_DATA); |
outb | 245 | drivers/net/atp.h | outb((value & 0x0f) | 0x10, ioaddr + PAR_DATA); |
outb | 312 | drivers/net/depca.c | outb((a), (b)); \ |
outb | 381 | drivers/net/eexpress.c | outb(0x00, ioaddr + SET_IRQ); |
outb | 385 | drivers/net/eexpress.c | outb(ASIC_RESET, ioaddr + EEPROM_Ctrl); |
outb | 433 | drivers/net/eexpress.c | outb(irqrmap[dev->irq] | 0x08, ioaddr + SET_IRQ); |
outb | 467 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 490 | drivers/net/eexpress.c | outb(irqrmap[dev->irq], ioaddr + SET_IRQ); |
outb | 494 | drivers/net/eexpress.c | outb(0x08 | irqrmap[dev->irq], ioaddr + SET_IRQ); |
outb | 533 | drivers/net/eexpress.c | outb(irqrmap[dev->irq], ioaddr + SET_IRQ); |
outb | 619 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 626 | drivers/net/eexpress.c | outb(irqrmap[dev->irq] | 0x08, ioaddr + SET_IRQ); |
outb | 640 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 643 | drivers/net/eexpress.c | outb(0, ioaddr + SET_IRQ); |
outb | 708 | drivers/net/eexpress.c | outb(ctrl_val, ee_addr); |
outb | 714 | drivers/net/eexpress.c | outb(outval, ee_addr); |
outb | 715 | drivers/net/eexpress.c | outb(outval | EE_SHIFT_CLK, ee_addr); /* EEPROM clock tick. */ |
outb | 717 | drivers/net/eexpress.c | outb(outval, ee_addr); /* Finish EEPROM a clock tick. */ |
outb | 720 | drivers/net/eexpress.c | outb(ctrl_val, ee_addr); |
outb | 723 | drivers/net/eexpress.c | outb(ctrl_val | EE_SHIFT_CLK, ee_addr); eeprom_delay(); |
outb | 725 | drivers/net/eexpress.c | outb(ctrl_val, ee_addr); eeprom_delay(); |
outb | 730 | drivers/net/eexpress.c | outb(ctrl_val | EE_SHIFT_CLK, ee_addr); |
outb | 732 | drivers/net/eexpress.c | outb(ctrl_val, ee_addr); |
outb | 745 | drivers/net/eexpress.c | outb(inb(ioaddr + Config) | 0x02, ioaddr + Config); |
outb | 748 | drivers/net/eexpress.c | outb(_586_RESET, ioaddr + EEPROM_Ctrl); |
outb | 769 | drivers/net/eexpress.c | outb(0x00, ioaddr + EEPROM_Ctrl); |
outb | 773 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 784 | drivers/net/eexpress.c | outb(0, ioaddr + SIGNAL_CA); |
outb | 788 | drivers/net/eexpress.c | outb(inb(ioaddr + Config) & ~0x02, ioaddr + Config); |
outb | 119 | drivers/net/ne.c | outb(regd, ioaddr + 0x0d); /* Restore the old values. */ |
outb | 188 | drivers/net/plip.c | outb(0x00, port_base + PAR_CONTROL); |
outb | 189 | drivers/net/plip.c | outb(0x55, port_base + PAR_DATA); |
outb | 276 | drivers/net/plip.c | outb(0x00, dev->base_addr); /* Release the interrupt. */ |
outb | 332 | drivers/net/plip.c | outb(0x00, dev->base_addr + PAR_DATA); |
outb | 333 | drivers/net/plip.c | outb(0x10, dev->base_addr + PAR_CONTROL); /* Enable the rx interrupt. */ |
outb | 341 | drivers/net/plip.c | outb(0x02, dev->base_addr + PAR_DATA); |
outb | 342 | drivers/net/plip.c | outb(0x10, dev->base_addr + PAR_CONTROL); /* Enable the rx interrupt. */ |
outb | 365 | drivers/net/plip.c | outb(0x10, dev->base_addr + PAR_DATA); |
outb | 379 | drivers/net/plip.c | outb(0x00, dev->base_addr + PAR_DATA); |
outb | 404 | drivers/net/plip.c | outb(0x00, dev->base_addr + PAR_CONTROL); /* Disable the rx interrupt. */ |
outb | 440 | drivers/net/plip.c | outb(1, dev->base_addr + PAR_DATA); /* Ack: 'Ready' */ |
outb | 503 | drivers/net/plip.c | outb(0x00, dev->base_addr + PAR_DATA); |
outb | 523 | drivers/net/plip.c | outb((val & 0xf), dev->base_addr); /* this makes data bits more stable */ |
outb | 525 | drivers/net/plip.c | outb(0x10 | (val & 0xf), dev->base_addr); |
outb | 532 | drivers/net/plip.c | outb(0x10 | (val >> 4), dev->base_addr); |
outb | 533 | drivers/net/plip.c | outb(val >> 4, dev->base_addr); |
outb | 569 | drivers/net/plip.c | outb(0x00, dev->base_addr + PAR_CONTROL); /* Disable my rx intr. */ |
outb | 570 | drivers/net/plip.c | outb(0x08, dev->base_addr + PAR_DATA); /* Trigger remote rx intr. */ |
outb | 583 | drivers/net/plip.c | outb(0x02, dev->base_addr + PAR_DATA); |
outb | 585 | drivers/net/plip.c | outb(0x00, dev->base_addr + PAR_DATA); |
outb | 593 | drivers/net/plip.c | outb(0x00, dev->base_addr + PAR_DATA); |
outb | 682 | drivers/net/plip.c | outb(0x00, dev->base_addr + PAR_DATA); |
outb | 247 | drivers/net/skeleton.c | outb(0x00, ioaddr); |
outb | 93 | drivers/net/smc-ultra.c | outb(reg4, ioaddr + 4); |
outb | 106 | drivers/net/smc-ultra.c | outb(0x80 | reg4, ioaddr + 4); |
outb | 109 | drivers/net/smc-ultra.c | outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c); |
outb | 115 | drivers/net/smc-ultra.c | outb(reg4, ioaddr + 4); |
outb | 184 | drivers/net/smc-ultra.c | outb(ULTRA_MEMENB, ioaddr); /* Enable memory, 16 bit mode. */ |
outb | 185 | drivers/net/smc-ultra.c | outb(0x80, ioaddr + 5); |
outb | 186 | drivers/net/smc-ultra.c | outb(0x01, ioaddr + 6); /* Enable interrupts and memory. */ |
outb | 195 | drivers/net/smc-ultra.c | outb(ULTRA_RESET, cmd_port); |
outb | 199 | drivers/net/smc-ultra.c | outb(ULTRA_MEMENB, cmd_port); |
outb | 249 | drivers/net/smc-ultra.c | outb(0x00, ioaddr + 6); /* Disable interrupts. */ |
outb | 142 | drivers/net/wd.c | outb( tmp ^ 0x01, ioaddr+1 ); /* attempt to clear 16bit bit */ |
outb | 147 | drivers/net/wd.c | outb( NIC16 | (asic_reg5&0x1f), ioaddr+WD_CMDREG5); |
outb | 148 | drivers/net/wd.c | outb(tmp, ioaddr+1); |
outb | 155 | drivers/net/wd.c | outb(tmp, ioaddr+1); /* Restore original reg1 value. */ |
outb | 199 | drivers/net/wd.c | outb(0x00, nic_addr+EN0_IMR); /* Disable all intrs. */ |
outb | 204 | drivers/net/wd.c | outb(E8390_RREAD+E8390_START, nic_addr); /* Trigger it... */ |
outb | 265 | drivers/net/wd.c | outb(ei_status.reg5, ioaddr+WD_CMDREG5); |
outb | 266 | drivers/net/wd.c | outb(ei_status.reg0, ioaddr); /* WD_CMDREG */ |
outb | 276 | drivers/net/wd.c | outb(WD_RESET, wd_cmd_port); |
outb | 281 | drivers/net/wd.c | outb((((dev->mem_start>>13) & 0x3f)|WD_MEMENB), wd_cmd_port); |
outb | 283 | drivers/net/wd.c | outb(NIC16 | ((dev->mem_start>>19) & 0x1f), wd_cmd_port+WD_CMDREG5); |
outb | 304 | drivers/net/wd.c | outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5); |
outb | 320 | drivers/net/wd.c | outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5); |
outb | 335 | drivers/net/wd.c | outb(ISA16 | ei_status.reg5, wd_cmdreg+WD_CMDREG5); |
outb | 337 | drivers/net/wd.c | outb(ei_status.reg5, wd_cmdreg+WD_CMDREG5); |
outb | 353 | drivers/net/wd.c | outb(ei_status.reg5, wd_cmdreg + WD_CMDREG5 ); |
outb | 356 | drivers/net/wd.c | outb(ei_status.reg0 & ~WD_MEMENB, wd_cmdreg); |
outb | 308 | drivers/scsi/aha152x.h | outb( (VAL), (PORT) ) |
outb | 323 | drivers/scsi/aha152x.h | outb( (inb(PORT) | (BITS)), (PORT) ) |
outb | 326 | drivers/scsi/aha152x.h | outb( (inb(PORT) & ~(BITS)), (PORT) ) |
outb | 329 | drivers/scsi/aha152x.h | outb( (inb(PORT) & ~(CLR)) | (SET) , (PORT) ) |
outb | 81 | drivers/scsi/aha1542.c | #define aha1542_intr_reset(base) outb(IRST, CONTROL(base)) |
outb | 111 | drivers/scsi/aha1542.c | outb(*cmdp, DATA(base)); |
outb | 120 | drivers/scsi/aha1542.c | outb(*cmdp++, DATA(base)); |
outb | 223 | drivers/scsi/aha1542.c | outb(SRST|IRST/*|SCRST*/, CONTROL(bse)); |
outb | 263 | drivers/scsi/aha1542.c | outb(IRST, CONTROL(bse)); |
outb | 853 | drivers/scsi/aha1542.c | outb((dma_chan - 4) | CASCADE, DMA_MODE_REG); |
outb | 854 | drivers/scsi/aha1542.c | outb(dma_chan - 4, DMA_MASK_REG); |
outb | 1020 | drivers/scsi/aha1542.c | outb(SCRST, CONTROL(SCpnt->host->io_port)); |
outb | 186 | drivers/scsi/aha1740.c | outb(G2CNTRL_IRST,G2CNTRL); /* interrupt reset */ |
outb | 197 | drivers/scsi/aha1740.c | outb(G2CNTRL_HRDY,G2CNTRL); /* Host Ready -> Mailbox in complete */ |
outb | 225 | drivers/scsi/aha1740.c | outb(G2CNTRL_HRDY,G2CNTRL); /* Host Ready -> Mailbox in complete */ |
outb | 380 | drivers/scsi/aha1740.c | outb((char) (adrs&0xff), MBOXOUT0); /* out, note this set */ |
outb | 381 | drivers/scsi/aha1740.c | outb((char) ((adrs>>8)&0xff), MBOXOUT1); /* of outb's must be */ |
outb | 382 | drivers/scsi/aha1740.c | outb((char) ((adrs>>16)&0xff), MBOXOUT2); /* atomic */ |
outb | 383 | drivers/scsi/aha1740.c | outb((char) ((adrs>>24)&0xff), MBOXOUT3); |
outb | 390 | drivers/scsi/aha1740.c | outb(ATTN_START | (target & 7), ATTN); /* Start it up */ |
outb | 451 | drivers/scsi/aha1740.c | outb(G2CNTRL_HRST,G2CNTRL); |
outb | 452 | drivers/scsi/aha1740.c | outb(0,G2CNTRL); |
outb | 157 | drivers/scsi/buslogic.c | #define INTR_RESET(base) outb(RINT, CONTROL(base)) |
outb | 210 | drivers/scsi/buslogic.c | outb(*cmdp, COMMAND_PARAMETER(base)); |
outb | 220 | drivers/scsi/buslogic.c | outb(*cmdp++, COMMAND_PARAMETER(base)); |
outb | 341 | drivers/scsi/buslogic.c | outb(RSOFT | RINT/* | RSBUS*/, CONTROL(base)); |
outb | 382 | drivers/scsi/buslogic.c | outb(RINT, CONTROL(base)); |
outb | 1017 | drivers/scsi/buslogic.c | outb((dma - 4) | CASCADE, DMA_MODE_REG); |
outb | 1018 | drivers/scsi/buslogic.c | outb(dma - 4, DMA_MASK_REG); |
outb | 386 | drivers/scsi/fdomain.c | outb( 0, SCSI_Cntl_port ); |
outb | 387 | drivers/scsi/fdomain.c | outb( 0, SCSI_Mode_Cntl_port ); |
outb | 389 | drivers/scsi/fdomain.c | outb( 0x21 | PARITY_MASK, TMC_Cntl_port ); /* Clear forced intr. */ |
outb | 391 | drivers/scsi/fdomain.c | outb( 0x01 | PARITY_MASK, TMC_Cntl_port ); |
outb | 424 | drivers/scsi/fdomain.c | outb( 0x80, port + IO_Control ); |
outb | 426 | drivers/scsi/fdomain.c | outb( 0x00, port + IO_Control ); |
outb | 476 | drivers/scsi/fdomain.c | outb( i, port_base + Write_Loopback ); |
outb | 754 | drivers/scsi/fdomain.c | outb( 0x00, SCSI_Cntl_port ); /* Disable data drivers */ |
outb | 755 | drivers/scsi/fdomain.c | outb( adapter_mask, port_base + SCSI_Data_NoACK ); /* Set our id bit */ |
outb | 756 | drivers/scsi/fdomain.c | outb( 0x04 | PARITY_MASK, TMC_Cntl_port ); /* Start arbitration */ |
outb | 784 | drivers/scsi/fdomain.c | outb( 0x82, SCSI_Cntl_port ); /* Bus Enable + Select */ |
outb | 785 | drivers/scsi/fdomain.c | outb( adapter_mask | (1 << target), SCSI_Data_NoACK_port ); |
outb | 788 | drivers/scsi/fdomain.c | outb( PARITY_MASK, TMC_Cntl_port ); |
outb | 799 | drivers/scsi/fdomain.c | outb( 0x80, SCSI_Cntl_port ); |
outb | 818 | drivers/scsi/fdomain.c | outb( 0x00, Interrupt_Cntl_port ); |
outb | 840 | drivers/scsi/fdomain.c | outb( 0x00, Interrupt_Cntl_port ); |
outb | 875 | drivers/scsi/fdomain.c | outb( 0x40 | FIFO_COUNT, Interrupt_Cntl_port ); |
outb | 877 | drivers/scsi/fdomain.c | outb( 0x82, SCSI_Cntl_port ); /* Bus Enable + Select */ |
outb | 878 | drivers/scsi/fdomain.c | outb( adapter_mask | (1 << current_SC->target), SCSI_Data_NoACK_port ); |
outb | 881 | drivers/scsi/fdomain.c | outb( 0x10 | PARITY_MASK, TMC_Cntl_port ); |
outb | 901 | drivers/scsi/fdomain.c | outb( 0x10 | PARITY_MASK, TMC_Cntl_port ); |
outb | 905 | drivers/scsi/fdomain.c | outb( 0x90 | FIFO_COUNT, Interrupt_Cntl_port ); |
outb | 906 | drivers/scsi/fdomain.c | outb( 0x80, SCSI_Cntl_port ); |
outb | 922 | drivers/scsi/fdomain.c | outb( current_SC->cmnd[current_SC->SCp.sent_command++], |
outb | 932 | drivers/scsi/fdomain.c | outb( 0xd0 | PARITY_MASK, TMC_Cntl_port ); |
outb | 938 | drivers/scsi/fdomain.c | outb( 0x90 | PARITY_MASK, TMC_Cntl_port ); |
outb | 956 | drivers/scsi/fdomain.c | outb( MESSAGE_REJECT, Write_SCSI_Data_port ); /* Reject */ |
outb | 1126 | drivers/scsi/fdomain.c | outb( 0xd0 | PARITY_MASK, TMC_Cntl_port ); |
outb | 1133 | drivers/scsi/fdomain.c | outb( 0x90 | PARITY_MASK, TMC_Cntl_port ); |
outb | 1150 | drivers/scsi/fdomain.c | outb( *current_SC->SCp.ptr++, Write_FIFO_port ); |
outb | 1245 | drivers/scsi/fdomain.c | outb( 0xd0 | FIFO_COUNT, Interrupt_Cntl_port ); |
outb | 1246 | drivers/scsi/fdomain.c | outb( 0x00, SCSI_Cntl_port ); |
outb | 1248 | drivers/scsi/fdomain.c | outb( 0x90 | FIFO_COUNT, Interrupt_Cntl_port ); |
outb | 1298 | drivers/scsi/fdomain.c | outb( 0x00, Interrupt_Cntl_port ); |
outb | 1299 | drivers/scsi/fdomain.c | outb( 0x00, SCSI_Cntl_port ); /* Disable data drivers */ |
outb | 1300 | drivers/scsi/fdomain.c | outb( adapter_mask, SCSI_Data_NoACK_port ); /* Set our id bit */ |
outb | 1302 | drivers/scsi/fdomain.c | outb( 0x20, Interrupt_Cntl_port ); |
outb | 1303 | drivers/scsi/fdomain.c | outb( 0x14 | PARITY_MASK, TMC_Cntl_port ); /* Start arbitration */ |
outb | 1362 | drivers/scsi/fdomain.c | outb( 0x0a, 0xa0 ); |
outb | 1364 | drivers/scsi/fdomain.c | outb( 0x0a, 0x20 ); |
outb | 1366 | drivers/scsi/fdomain.c | outb( 0x0b, 0xa0 ); |
outb | 1368 | drivers/scsi/fdomain.c | outb( 0x0b, 0x20 ); |
outb | 1445 | drivers/scsi/fdomain.c | outb( 1, SCSI_Cntl_port ); |
outb | 1447 | drivers/scsi/fdomain.c | outb( 0, SCSI_Cntl_port ); |
outb | 1449 | drivers/scsi/fdomain.c | outb( 0, SCSI_Mode_Cntl_port ); |
outb | 1450 | drivers/scsi/fdomain.c | outb( PARITY_MASK, TMC_Cntl_port ); |
outb | 75 | drivers/scsi/g_NCR5380.h | #define NCR5380_write(reg, value) (outb((value), (port + (reg)))) |
outb | 164 | drivers/scsi/pas16.c | outb( 0xbc + board_num, MASTER_ADDRESS_PTR ); |
outb | 165 | drivers/scsi/pas16.c | outb( port >> 2, MASTER_ADDRESS_PTR ); |
outb | 186 | drivers/scsi/pas16.c | outb( 0x30, io_port + P_TIMEOUT_COUNTER_REG ); /* Timeout counter */ |
outb | 187 | drivers/scsi/pas16.c | outb( 0x01, io_port + P_TIMEOUT_STATUS_REG_OFFSET ); /* Reset TC */ |
outb | 188 | drivers/scsi/pas16.c | outb( 0x01, io_port + WAIT_STATE ); /* 1 Wait state */ |
outb | 197 | drivers/scsi/pas16.c | outb( tmp, io_port + IO_CONFIG_3 ); |
outb | 200 | drivers/scsi/pas16.c | outb( 0x6d, io_port + SYS_CONFIG_4 ); |
outb | 236 | drivers/scsi/pas16.c | outb( tmp, port + PCB_CONFIG ); |
outb | 238 | drivers/scsi/pas16.c | outb( board_rev, port + PCB_CONFIG ); |
outb | 430 | drivers/scsi/pas16.c | outb( P_TS_CT, instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET); |
outb | 459 | drivers/scsi/pas16.c | outb( *s++, reg ); |
outb | 462 | drivers/scsi/pas16.c | outb( P_TS_CT, instance->io_port + P_TIMEOUT_STATUS_REG_OFFSET); |
outb | 165 | drivers/scsi/pas16.h | #define NCR5380_write(reg, value) ( outb((value),PAS16_io_port(reg)) ) |
outb | 174 | drivers/scsi/pas16.h | outb( (value),PAS16_io_port(reg) ) ) |
outb | 422 | drivers/scsi/ultrastor.c | outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(config.port_address)); |
outb | 589 | drivers/scsi/ultrastor.c | outb(0, addr + 0x16); |
outb | 590 | drivers/scsi/ultrastor.c | outb(0, addr + 0x1B); |
outb | 594 | drivers/scsi/ultrastor.c | outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(addr+12)); |
outb | 595 | drivers/scsi/ultrastor.c | outb(0x02, SYS_DOORBELL_MASK(addr+12)); |
outb | 769 | drivers/scsi/ultrastor.c | outb(1, config.ogm_address - 1); |
outb | 770 | drivers/scsi/ultrastor.c | outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address)); |
outb | 772 | drivers/scsi/ultrastor.c | outb(0x1, LCL_DOORBELL_INTR(config.doorbell_address)); |
outb | 876 | drivers/scsi/ultrastor.c | outb(0x80, config.ogm_address - 1); |
outb | 877 | drivers/scsi/ultrastor.c | outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address)); |
outb | 937 | drivers/scsi/ultrastor.c | outb(0xc0, LCL_DOORBELL_INTR(config.doorbell_address)); |
outb | 940 | drivers/scsi/ultrastor.c | outb(0, config.ogm_address - 1); |
outb | 941 | drivers/scsi/ultrastor.c | outb(0, config.icm_address - 1); |
outb | 1028 | drivers/scsi/ultrastor.c | outb(2, SYS_DOORBELL_INTR(config.doorbell_address)); |
outb | 1029 | drivers/scsi/ultrastor.c | outb(0, config.icm_address - 1); |
outb | 1044 | drivers/scsi/ultrastor.c | outb(1, SYS_DOORBELL_INTR(config.doorbell_address)); |
outb | 533 | drivers/scsi/wd7000.c | outb(host->control, host->iobase+ASC_CONTROL); |
outb | 540 | drivers/scsi/wd7000.c | outb(host->control,host->iobase+ASC_CONTROL); |
outb | 573 | drivers/scsi/wd7000.c | outb(*cmd, host->iobase+ASC_COMMAND); |
outb | 799 | drivers/scsi/wd7000.c | #define wd7000_intr_ack(host) outb(0,host->iobase+ASC_INTR_ACK) |
outb | 1003 | drivers/scsi/wd7000.c | outb(ASC_RES, host->iobase+ASC_CONTROL); |
outb | 1005 | drivers/scsi/wd7000.c | outb(0,host->iobase+ASC_CONTROL); |
outb | 13 | drivers/sound/dma.h | #define deb_outb(x,y) {printk("out %02x, %02x\n", x, y);outb(x,y);} |
outb | 155 | drivers/sound/os.h | #define OUTB outb |
outb | 129 | include/asm/dma.h | outb(dmanr, DMA1_MASK_REG); |
outb | 131 | include/asm/dma.h | outb(dmanr & 3, DMA2_MASK_REG); |
outb | 137 | include/asm/dma.h | outb(dmanr | 4, DMA1_MASK_REG); |
outb | 139 | include/asm/dma.h | outb((dmanr & 3) | 4, DMA2_MASK_REG); |
outb | 152 | include/asm/dma.h | outb(0, DMA1_CLEAR_FF_REG); |
outb | 154 | include/asm/dma.h | outb(0, DMA2_CLEAR_FF_REG); |
outb | 161 | include/asm/dma.h | outb(mode | dmanr, DMA1_MODE_REG); |
outb | 163 | include/asm/dma.h | outb(mode | (dmanr&3), DMA2_MODE_REG); |
outb | 175 | include/asm/dma.h | outb(pagenr, DMA_PAGE_0); |
outb | 178 | include/asm/dma.h | outb(pagenr, DMA_PAGE_1); |
outb | 181 | include/asm/dma.h | outb(pagenr, DMA_PAGE_2); |
outb | 184 | include/asm/dma.h | outb(pagenr, DMA_PAGE_3); |
outb | 187 | include/asm/dma.h | outb(pagenr & 0xfe, DMA_PAGE_5); |
outb | 190 | include/asm/dma.h | outb(pagenr & 0xfe, DMA_PAGE_6); |
outb | 193 | include/asm/dma.h | outb(pagenr & 0xfe, DMA_PAGE_7); |
outb | 206 | include/asm/dma.h | outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); |
outb | 207 | include/asm/dma.h | outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE ); |
outb | 209 | include/asm/dma.h | outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); |
outb | 210 | include/asm/dma.h | outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE ); |
outb | 227 | include/asm/dma.h | outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); |
outb | 228 | include/asm/dma.h | outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE ); |
outb | 230 | include/asm/dma.h | outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); |
outb | 231 | include/asm/dma.h | outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE ); |
outb | 57 | include/linux/busmouse.h | #define MSE_INT_OFF() outb(MSE_DISABLE_INTERRUPTS, MSE_CONTROL_PORT) |
outb | 58 | include/linux/busmouse.h | #define MSE_INT_ON() outb(MSE_ENABLE_INTERRUPTS, MSE_CONTROL_PORT) |
outb | 79 | include/linux/busmouse.h | #define MS_MSE_INT_OFF() {outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); \ |
outb | 80 | include/linux/busmouse.h | outb(MS_MSE_DISABLE_INTERRUPTS, MS_MSE_DATA_PORT);} |
outb | 81 | include/linux/busmouse.h | #define MS_MSE_INT_ON() {outb(MS_MSE_COMMAND_MODE, MS_MSE_CONTROL_PORT); \ |
outb | 82 | include/linux/busmouse.h | outb(MS_MSE_ENABLE_INTERRUPTS, MS_MSE_DATA_PORT);} |
outb | 421 | include/linux/sbpcd.h | #define OUT(x,y) outb(y,x) |
outb | 56 | kernel/irq.c | outb(cache_21,0x21); |
outb | 62 | kernel/irq.c | outb(cache_A1,0xA1); |
outb | 76 | kernel/irq.c | outb(cache_21,0x21); |
outb | 82 | kernel/irq.c | outb(cache_A1,0xA1); |
outb | 243 | kernel/irq.c | outb(cache_21,0x21); |
outb | 247 | kernel/irq.c | outb(cache_21,0x21); |
outb | 248 | kernel/irq.c | outb(cache_A1,0xA1); |
outb | 282 | kernel/irq.c | outb(cache_21,0x21); |
outb | 285 | kernel/irq.c | outb(cache_A1,0xA1); |
outb | 308 | kernel/irq.c | outb(0,0xF0); |
outb | 811 | kernel/sched.c | outb(LATCH >> 8 , 0x40); /* MSB */ |