tag	line	file	source code
HZ	359	drivers/block/floppy.c	motor_on_timer[nr].expires = HZ;
HZ	371	drivers/block/floppy.c	motor_off_timer[nr].expires = 3*HZ;
HZ	1076	drivers/block/floppy.c	timer_table[FLOPPY_TIMER].expires = jiffies+10*HZ;
HZ	231	drivers/char/console.c	int blankinterval = 10*60*HZ;
HZ	874	drivers/char/console.c	blankinterval = ((par[1] < 60) ? par[1] : 60) * 60 * HZ;
HZ	1104	drivers/char/console.c	kd_mksound(0x637, HZ/8);
HZ	317	drivers/char/n_tty.c	if (tty->overrun_time < (jiffies - HZ)) {
HZ	768	drivers/char/n_tty.c	time = (HZ / 10) * TIME_CHAR(tty);
HZ	725	drivers/char/serial.c	if ((jiffies - last_strobe) >= 60*HZ) {
HZ	745	drivers/char/serial.c	timer_table[RS_TIMER].expires = jiffies + 60 * HZ;
HZ	1108	drivers/char/serial.c	info->timeout = ((info->xmit_fifo_size*HZ*15*quot) /
HZ	1112	drivers/char/serial.c	info->timeout = (info->xmit_fifo_size*HZ*30/269) + 2;
HZ	1115	drivers/char/serial.c	info->timeout = (info->xmit_fifo_size*HZ*15/baud_table[i]) + 2;
HZ	1634	drivers/char/serial.c	send_break(info, HZ/4);  /* 1/4 second */
HZ	1641	drivers/char/serial.c	send_break(info, arg ? arg*(HZ/10) : HZ/4);
HZ	1370	drivers/char/tpqic02.c	while (jiffies - t < 3*HZ)
HZ	1762	drivers/char/tpqic02.c	timer_table[TAPE_QIC02_TIMER].expires = jiffies + 6*HZ;
HZ	139	drivers/char/vt.c	unsigned int ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
HZ	33	drivers/net/ppp.c	#define OPTIMIZE_FLAG_TIME  ((HZ * 3)/2)  /* */
HZ	267	drivers/sound/dmabuf.c	DO_SLEEP (dev_sleeper[dev], dev_sleep_flag[dev], 10 * HZ);
HZ	285	drivers/sound/dmabuf.c	DO_SLEEP (dev_sleeper[dev], dev_sleep_flag[dev], HZ / 4);
HZ	367	drivers/sound/dmabuf.c	DO_SLEEP (dev_sleeper[dev], dev_sleep_flag[dev], 2 * HZ);
HZ	534	drivers/sound/dmabuf.c	DO_SLEEP (dev_sleeper[dev], dev_sleep_flag[dev], 2 * HZ);
HZ	1977	drivers/sound/gus_wave.c	DO_SLEEP (dram_sleeper, dram_sleep_flag, HZ);
HZ	92	drivers/sound/sb_dsp.c	limit = GET_TIME () + HZ / 10;/* The timeout is 0.1 secods */
HZ	502	drivers/sound/sb_dsp.c	DO_SLEEP (testq, testf, HZ / 5);
HZ	590	drivers/sound/sequencer.c	DO_SLEEP (seq_sleeper, seq_sleep_flag, HZ / 10);
HZ	800	drivers/sound/sequencer.c	return IOCTL_OUT (arg, HZ);
HZ	112	fs/nfs/inode.c	server->timeo = data->timeo*HZ/10;
HZ	114	fs/nfs/inode.c	server->acregmin = data->acregmin*HZ;
HZ	115	fs/nfs/inode.c	server->acregmax = data->acregmax*HZ;
HZ	116	fs/nfs/inode.c	server->acdirmin = data->acdirmin*HZ;
HZ	117	fs/nfs/inode.c	server->acdirmax = data->acdirmax*HZ;
HZ	66	fs/nfs/sock.c	max_timeout = NFS_MAX_RPC_TIMEOUT*HZ/10;
HZ	129	fs/proc/array.c	xtime.tv_sec - jiffies / HZ);
HZ	142	fs/proc/array.c	uptime / HZ,
HZ	143	fs/proc/array.c	uptime % HZ,
HZ	144	fs/proc/array.c	idle / HZ,
HZ	145	fs/proc/array.c	idle % HZ);
HZ	232	fs/select.c	timeout = ROUND_UP(get_fs_long((unsigned long *)&tvp->tv_usec),(1000000/HZ));
HZ	233	fs/select.c	timeout += get_fs_long((unsigned long *)&tvp->tv_sec) * HZ;
HZ	245	fs/select.c	put_fs_long(timeout/HZ, (unsigned long *) &tvp->tv_sec);
HZ	246	fs/select.c	timeout %= HZ;
HZ	247	fs/select.c	timeout *= (1000000/HZ);
HZ	67	include/linux/lp.h	#define LP_TIMEOUT_INTERRUPT  (60 * HZ)
HZ	68	include/linux/lp.h	#define LP_TIMEOUT_POLLED  (10 * HZ)
HZ	4	include/linux/param.h	#ifndef HZ
HZ	69	include/linux/sched.h	#define LOAD_FREQ  (5*HZ)    /* 5 sec intervals */
HZ	79	include/linux/sched.h	#define CT_TO_SECS(x)  ((x) / HZ)
HZ	80	include/linux/sched.h	#define CT_TO_USECS(x)  (((x) % HZ) * 1000000/HZ)
HZ	67	include/linux/timex.h	#define LATCH  ((CLOCK_TICK_RATE + HZ/2) / HZ)  /* For divider */
HZ	69	include/linux/timex.h	#define FINETUNE (((((LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \
HZ	71	include/linux/timex.h	<< (SHIFT_SCALE-SHIFT_HZ)) / HZ)
HZ	343	include/linux/tpqic02.h	#define TIM_S  (4*HZ)    /* 4 seconds (normal cmds) */
HZ	344	include/linux/tpqic02.h	#define TIM_M  (30*HZ)    /* 30 seconds (write FM) */
HZ	345	include/linux/tpqic02.h	#define TIM_R  (8*60*HZ)  /* 8 minutes (retensioning) */
HZ	346	include/linux/tpqic02.h	#define TIM_F  (2*3600*HZ)  /* est. 1.2hr for full tape read/write+2 retens */
HZ	245	init/main.c	if (ticks >= HZ) {
HZ	248	init/main.c	:"d" (HZ),
HZ	28	kernel/info.c	val.uptime = jiffies / HZ;
HZ	19	kernel/itimer.c	return((unsigned long )value->tv_sec * HZ +
HZ	20	kernel/itimer.c	(unsigned long )(value->tv_usec + (1000000 / HZ - 1)) /
HZ	21	kernel/itimer.c	(1000000 / HZ));
HZ	26	kernel/itimer.c	value->tv_usec = (jiffies % HZ) * (1000000 / HZ);
HZ	27	kernel/itimer.c	value->tv_sec = jiffies / HZ;
HZ	40	kernel/sched.c	long tick = 1000000 / HZ;               /* timer interrupt period */
HZ	42	kernel/sched.c	int tickadj = 500/HZ;      /* microsecs */
HZ	480	kernel/sched.c	time_offset += (time_adj * HZ) >> (SHIFT_SCALE - SHIFT_UPDATE);
HZ	485	kernel/sched.c	time_offset -= (time_adj * HZ) >> (SHIFT_SCALE - SHIFT_UPDATE);
HZ	353	kernel/time.c	if (txc.tick < 900000/HZ || txc.tick > 1100000/HZ)
HZ	230	mm/kmalloc.c	if (last + 10*HZ < jiffies) {
HZ	705	net/inet/af_inet.c	current->timeout = jiffies + HZ*sk->lingertime;
HZ	120	net/inet/arp.c	#define ARP_RES_TIME    (250*(HZ/10))
HZ	133	net/inet/arp.c	#define ARP_TIMEOUT    (600*HZ)
HZ	141	net/inet/arp.c	#define ARP_CHECK_INTERVAL  (60 * HZ)
HZ	1911	net/inet/ip.c	sk->rto = min(sk->rto << 1, 120*HZ);
HZ	37	net/inet/ip.h	#define IP_FRAG_TIME  (30 * HZ)    /* fragment lifetime  */
HZ	714	net/inet/tcp.c	sk->partial_timer.expires = HZ;
HZ	2647	net/inet/tcp.c	if (sk->rto > 120*HZ)
HZ	2648	net/inet/tcp.c	sk->rto = 120*HZ;
HZ	2745	net/inet/tcp.c	if (sk->rto > 120*HZ)
HZ	2746	net/inet/tcp.c	sk->rto = 120*HZ;
HZ	4285	net/inet/tcp.c	sk->rto = min(sk->rto << 1, 120*HZ);
HZ	49	net/inet/tcp.h	#define TCP_TIMEOUT_LEN  (15*60*HZ) /* should be about 15 mins    */
HZ	50	net/inet/tcp.h	#define TCP_TIMEWAIT_LEN (60*HZ) /* how long to wait to sucessfully
HZ	52	net/inet/tcp.h	#define TCP_ACK_TIME  (3*HZ)  /* time to delay before sending an ACK  */
HZ	57	net/inet/tcp.h	#define TCP_TIMEOUT_INIT (3*HZ)  /* RFC 1122 initial timeout value  */