root/drivers/net/Space.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. ethif_probe
  2. pc_eth_probe
  3. pc_eth_open

   1 /*
   2  * INET         An implementation of the TCP/IP protocol suite for the LINUX
   3  *              operating system.  INET is implemented using the  BSD Socket
   4  *              interface as the means of communication with the user level.
   5  *
   6  *              Holds initial configuration information for devices.
   7  *
   8  * NOTE:        This file is a nice idea, but its current format does not work
   9  *              well for drivers that support multiple units, like the SLIP
  10  *              driver.  We should actually have only one pointer to a driver
  11  *              here, with the driver knowing how many units it supports.
  12  *              Currently, the SLIP driver abuses the "base_addr" integer
  13  *              field of the 'device' structure to store the unit number...
  14  *              -FvK
  15  *
  16  * Version:     @(#)Space.c     1.0.7   08/12/93
  17  *
  18  * Authors:     Ross Biro, <bir7@leland.Stanford.Edu>
  19  *              Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
  20  *              Donald J. Becker, <becker@super.org>
  21  *
  22  *              This program is free software; you can redistribute it and/or
  23  *              modify it under the terms of the GNU General Public License
  24  *              as published by the Free Software Foundation; either version
  25  *              2 of the License, or (at your option) any later version.
  26  */
  27 #include <linux/config.h>
  28 #include <linux/netdevice.h>
  29 #include <linux/errno.h>
  30 
  31 #define LOOPBACK                        /* always present, right?       */
  32 
  33 #define NEXT_DEV        NULL
  34 
  35 
  36 /* A unifed ethernet device probe.  This is the easiest way to have every
  37    ethernet adaptor have the name "eth[0123...]".
  38    */
  39 
  40 extern int ultra_probe(struct device *dev);
  41 extern int wd_probe(struct device *dev);
  42 extern int el2_probe(struct device *dev);
  43 extern int ne_probe(struct device *dev);
  44 extern int hp_probe(struct device *dev);
  45 extern int hp_plus_probe(struct device *dev);
  46 extern int znet_probe(struct device *);
  47 extern int express_probe(struct device *);
  48 extern int el3_probe(struct device *);
  49 extern int at1500_probe(struct device *);
  50 extern int at1700_probe(struct device *);
  51 extern int depca_probe(struct device *);
  52 extern int el1_probe(struct device *);
  53 extern int el16_probe(struct device *);
  54 extern int elplus_probe(struct device *);
  55 extern int ac3200_probe(struct device *);
  56 extern int e2100_probe(struct device *);
  57 extern int ni52_probe(struct device *);
  58 extern int ni65_probe(struct device *);
  59 extern int SK_init(struct device *);
  60 
  61 /* Detachable devices ("pocket adaptors" and special PCMCIA drivers). */
  62 extern int atp_init(struct device *);
  63 extern int de600_probe(struct device *);
  64 extern int de620_probe(struct device *);
  65 
  66 static int
  67 ethif_probe(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
  68 {
  69     short base_addr = dev->base_addr;
  70 
  71     if (base_addr < 0  ||  base_addr == 1)
  72         return 1;               /* ENXIO */
  73 
  74     if (1
  75 #if defined(CONFIG_ULTRA)
  76         && ultra_probe(dev)
  77 #endif
  78 #if defined(CONFIG_WD80x3) || defined(WD80x3)
  79         && wd_probe(dev)
  80 #endif
  81 #if defined(CONFIG_EL2) || defined(EL2) /* 3c503 */
  82         && el2_probe(dev)
  83 #endif
  84 #if defined(CONFIG_NE2000) || defined(NE2000)
  85         && ne_probe(dev)
  86 #endif
  87 #if defined(CONFIG_HPLAN) || defined(HPLAN)
  88         && hp_probe(dev)
  89 #endif
  90 #if defined(CONFIG_HPLAN_PLUS)
  91         && hp_plus_probe(dev)
  92 #endif
  93 #ifdef CONFIG_AT1500
  94         && at1500_probe(dev)
  95 #endif
  96 #ifdef CONFIG_AT1700
  97         && at1700_probe(dev)
  98 #endif
  99 #ifdef CONFIG_EL3               /* 3c509 */
 100         && el3_probe(dev)
 101 #endif
 102 #ifdef CONFIG_ZNET              /* Zenith Z-Note and some IBM Thinkpads. */
 103         && znet_probe(dev)
 104 #endif
 105 #ifdef CONFIG_EEXPRESS          /* Intel EtherExpress */
 106         && express_probe(dev)
 107 #endif
 108 #ifdef CONFIG_DEPCA             /* DEC DEPCA */
 109         && depca_probe(dev)
 110 #endif
 111 #ifdef CONFIG_EL1               /* 3c501 */
 112         && el1_probe(dev)
 113 #endif
 114 #ifdef CONFIG_EL16              /* 3c507 */
 115         && el16_probe(dev)
 116 #endif
 117 #ifdef CONFIG_ELPLUS            /* 3c505 */
 118         && elplus_probe(dev)
 119 #endif
 120 #ifdef CONFIG_AC3200            /* Ansel Communications EISA 3200. */
 121         && ac3200_probe(dev)
 122 #endif
 123 #ifdef CONFIG_E2100             /* Cabletron E21xx series. */
 124         && e2100_probe(dev)
 125 #endif
 126 #ifdef CONFIG_DE600             /* D-Link DE-600 adapter */
 127         && de600_probe(dev)
 128 #endif
 129 #ifdef CONFIG_DE620             /* D-Link DE-620 adapter */
 130         && de620_probe(dev)
 131 #endif
 132 #if defined(CONFIG_SK_G16)
 133         && SK_init(dev)
 134 #endif
 135 #ifdef CONFIG_NI52
 136         && ni52_probe(dev)
 137 #endif
 138 #ifdef CONFIG_NI65
 139         && ni65_probe(dev)
 140 #endif
 141         && 1 ) {
 142         return 1;       /* -ENODEV or -EAGAIN would be more accurate. */
 143     }
 144     return 0;
 145 }
 146 
 147 #ifdef CONFIG_PCMCIA_NET
 148 extern int dl_open(struct device *dev);
 149 extern int tc589_open(struct device *dev);
 150 extern int ibmccae_open(struct device *dev);
 151 static int pc_eth_open(struct device *dev);
 152 
 153 static int pc_eth_probe(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 154   {
 155   dev->open = &pc_eth_open;
 156   dev->set_config = &ether_config;
 157   dev->tbusy = 1;
 158   return 0;
 159   }
 160 
 161 static int pc_eth_open(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 162   {
 163   if (1
 164 #ifdef CONFIG_DE650
 165       && dl_open(dev)
 166 #endif
 167 #ifdef CONFIG_3C589
 168       && tc589_open(dev)
 169 #endif
 170 #ifdef CONFIG_IBMCCAE
 171       && ibmccae_open(dev)
 172 #endif
 173       && 1)
 174     return -ENODEV;
 175   else
 176     return 0;
 177   }
 178 #endif /* CONFIG_PCMCIA_NET */
 179 
 180 
 181 /* Run-time ATtachable (Pocket) devices have a different (not "eth#") name. */
 182 #ifdef CONFIG_ATP               /* AT-LAN-TEC (RealTek) pocket adaptor. */
 183 static struct device atp_dev = {
 184     "atp0", 0, 0, 0, 0, 0, 0, 0, 0, 0, NEXT_DEV, atp_init, /* ... */ };
 185 #   undef NEXT_DEV
 186 #   define NEXT_DEV     (&atp_dev)
 187 #endif
 188 
 189 #ifdef CONFIG_PCMCIA_NET
 190 static struct device pc_eth1_dev = {
 191     "pc_eth1", 0, 0, 0, 0, 0, 0, 0, 0, 0, NEXT_DEV, pc_eth_probe,
 192     };
 193 static struct device pc_eth0_dev = {
 194     "pc_eth0", 0, 0, 0, 0, 0, 0, 0, 0, 0, &pc_eth1_dev, pc_eth_probe,
 195     };
 196 #   undef NEXT_DEV
 197 #   define NEXT_DEV     (&pc_eth0_dev)
 198 #endif /* CONFIG_PCMCIA_NET */
 199 
 200 /* The first device defaults to I/O base '0', which means autoprobe. */
 201 #ifndef ETH0_ADDR
 202 # define ETH0_ADDR 0
 203 #endif
 204 #ifndef ETH0_IRQ
 205 # define ETH0_IRQ 0
 206 #endif
 207 /* "eth0" defaults to autoprobe (== 0), other use a base of 0xffe0 (== -0x20),
 208    which means "don't probe".  These entries exist to only to provide empty
 209    slots which may be enabled at boot-time. */
 210 
 211 static struct device eth3_dev = {
 212     "eth3", 0,0,0,0,0xffe0 /* I/O base*/, 0,0,0,0, NEXT_DEV, ethif_probe };
 213 static struct device eth2_dev = {
 214     "eth2", 0,0,0,0,0xffe0 /* I/O base*/, 0,0,0,0, &eth3_dev, ethif_probe };
 215 static struct device eth1_dev = {
 216     "eth1", 0,0,0,0,0xffe0 /* I/O base*/, 0,0,0,0, &eth2_dev, ethif_probe };
 217 
 218 static struct device eth0_dev = {
 219     "eth0", 0, 0, 0, 0, ETH0_ADDR, ETH0_IRQ, 0, 0, 0, &eth1_dev, ethif_probe };
 220 
 221 #   undef NEXT_DEV
 222 #   define NEXT_DEV     (&eth0_dev)
 223 
 224 #if defined(PLIP) || defined(CONFIG_PLIP)
 225     extern int plip_init(struct device *);
 226     static struct device plip2_dev = {
 227         "plip2", 0, 0, 0, 0, 0x278, 2, 0, 0, 0, NEXT_DEV, plip_init, };
 228     static struct device plip1_dev = {
 229         "plip1", 0, 0, 0, 0, 0x378, 7, 0, 0, 0, &plip2_dev, plip_init, };
 230     static struct device plip0_dev = {
 231         "plip0", 0, 0, 0, 0, 0x3BC, 5, 0, 0, 0, &plip1_dev, plip_init, };
 232 #   undef NEXT_DEV
 233 #   define NEXT_DEV     (&plip0_dev)
 234 #endif  /* PLIP */
 235 
 236 #if defined(SLIP) || defined(CONFIG_SLIP)
 237     extern int slip_init(struct device *);
 238     static struct device slip3_dev = {
 239         "sl3",                  /* Internal SLIP driver, channel 3      */
 240         0x0,                    /* recv memory end                      */
 241         0x0,                    /* recv memory start                    */
 242         0x0,                    /* memory end                           */
 243         0x0,                    /* memory start                         */
 244         0x3,                    /* base I/O address                     */
 245         0,                      /* IRQ                                  */
 246         0, 0, 0,                /* flags                                */
 247         NEXT_DEV,               /* next device                          */
 248         slip_init               /* slip_init should set up the rest     */
 249     };
 250     static struct device slip2_dev = {
 251         "sl2",                  /* Internal SLIP driver, channel 2      */
 252         0x0,                    /* recv memory end                      */
 253         0x0,                    /* recv memory start                    */
 254         0x0,                    /* memory end                           */
 255         0x0,                    /* memory start                         */
 256         0x2,                    /* base I/O address                     */
 257         0,                      /* IRQ                                  */
 258         0, 0, 0,                /* flags                                */
 259         &slip3_dev,             /* next device                          */
 260         slip_init               /* slip_init should set up the rest     */
 261     };
 262     static struct device slip1_dev = {
 263         "sl1",                  /* Internal SLIP driver, channel 1      */
 264         0x0,                    /* recv memory end                      */
 265         0x0,                    /* recv memory start                    */
 266         0x0,                    /* memory end                           */
 267         0x0,                    /* memory start                         */
 268         0x1,                    /* base I/O address                     */
 269         0,                      /* IRQ                                  */
 270         0, 0, 0,                /* flags                                */
 271         &slip2_dev,             /* next device                          */
 272         slip_init               /* slip_init should set up the rest     */
 273     };
 274     static struct device slip0_dev = {
 275         "sl0",                  /* Internal SLIP driver, channel 0      */
 276         0x0,                    /* recv memory end                      */
 277         0x0,                    /* recv memory start                    */
 278         0x0,                    /* memory end                           */
 279         0x0,                    /* memory start                         */
 280         0x0,                    /* base I/O address                     */
 281         0,                      /* IRQ                                  */
 282         0, 0, 0,                /* flags                                */
 283         &slip1_dev,             /* next device                          */
 284         slip_init               /* slip_init should set up the rest     */
 285     };
 286 #   undef       NEXT_DEV
 287 #   define      NEXT_DEV        (&slip0_dev)
 288 #endif  /* SLIP */
 289   
 290 #if defined(CONFIG_PPP)
 291 extern int ppp_init(struct device *);
 292 static struct device ppp3_dev = {
 293     "ppp3", 0x0, 0x0, 0x0, 0x0, 3, 0, 0, 0, 0, NEXT_DEV,  ppp_init, };
 294 static struct device ppp2_dev = {
 295     "ppp2", 0x0, 0x0, 0x0, 0x0, 2, 0, 0, 0, 0, &ppp3_dev, ppp_init, };
 296 static struct device ppp1_dev = {
 297     "ppp1", 0x0, 0x0, 0x0, 0x0, 1, 0, 0, 0, 0, &ppp2_dev, ppp_init, };
 298 static struct device ppp0_dev = {
 299     "ppp0", 0x0, 0x0, 0x0, 0x0, 0, 0, 0, 0, 0, &ppp1_dev, ppp_init, };
 300 #undef NEXT_DEV
 301 #define NEXT_DEV (&ppp0_dev)
 302 #endif   /* PPP */
 303 
 304 #ifdef CONFIG_DUMMY
 305     extern int dummy_init(struct device *dev);
 306     static struct device dummy_dev = {
 307         "dummy", 0x0, 0x0, 0x0, 0x0, 0, 0, 0, 0, 0, NEXT_DEV, dummy_init, };
 308 #   undef       NEXT_DEV
 309 #   define      NEXT_DEV        (&dummy_dev)
 310 #endif
 311 
 312 #ifdef LOOPBACK
 313     extern int loopback_init(struct device *dev);
 314     static struct device loopback_dev = {
 315         "lo",                   /* Software Loopback interface          */
 316         0x0,                    /* recv memory end                      */
 317         0x0,                    /* recv memory start                    */
 318         0x0,                    /* memory end                           */
 319         0x0,                    /* memory start                         */
 320         0,                      /* base I/O address                     */
 321         0,                      /* IRQ                                  */
 322         0, 0, 0,                /* flags                                */
 323         NEXT_DEV,               /* next device                          */
 324         loopback_init           /* loopback_init should set up the rest */
 325     };
 326 #   undef       NEXT_DEV
 327 #   define      NEXT_DEV        (&loopback_dev)
 328 #endif
 329 
 330 
 331 struct device *dev_base = NEXT_DEV;

/* [previous][next][first][last][top][bottom][index][help] */