| tag | line | file | source code |
|---|
| command | 352 | drivers/block/floppy.c | static unsigned char command = 0; |
| command | 502 | drivers/block/floppy.c | if (command == FD_READ) |
| command | 504 | drivers/block/floppy.c | if (command == FD_FORMAT) { |
| command | 518 | drivers/block/floppy.c | if (command == FD_WRITE) |
| command | 524 | drivers/block/floppy.c | set_dma_mode(FLOPPY_DMA, (command == FD_READ)? DMA_MODE_READ : DMA_MODE_WRITE); |
| command | 806 | drivers/block/floppy.c | } else if (command == FD_READ && |
| command | 824 | drivers/block/floppy.c | output_byte(command); |
| command | 825 | drivers/block/floppy.c | if (command != FD_FORMAT) { |
| command | 880 | drivers/block/floppy.c | read_track = (command == FD_READ) && (CURRENT_ERRORS < 4) && |
| command | 1173 | drivers/block/floppy.c | command = FD_READ; |
| command | 1175 | drivers/block/floppy.c | command = FD_WRITE; |
| command | 1194 | drivers/block/floppy.c | command = FD_FORMAT; |
| command | 1203 | drivers/block/floppy.c | if (command == FD_READ) { |
| command | 1207 | drivers/block/floppy.c | } else if (command == FD_WRITE) |
| command | 420 | drivers/block/xd.c | static u_char *xd_build (u_char *cmdblk,u_char command,u_char drive,u_char head,u_short cylinder,u_char sector,u_char count,u_char control) |
| command | 422 | drivers/block/xd.c | cmdblk[0] = command; |
| command | 444 | drivers/block/xd.c | static u_int xd_command (u_char *command,u_char mode,u_char *indata,u_char *outdata,u_char *sense,u_long timeout) |
| command | 449 | drivers/block/xd.c | printk("xd_command: command = 0x%X, mode = 0x%X, indata = 0x%X, outdata = 0x%X, sense = 0x%X\n",command,mode,indata,outdata,sense); |
| command | 482 | drivers/block/xd.c | outb(command ? *command++ : 0,XD_DATA); |
| command | 687 | drivers/block/xd.c | void xd_setup (char *command,int *integers) |
| command | 700 | drivers/block/xd.c | static void xd_setparam (u_char command,u_char drive,u_char heads,u_short cylinders,u_short rwrite,u_short wprecomp,u_char ecc) |
| command | 704 | drivers/block/xd.c | xd_build(cmdblk,command,drive,0,0,0,0,0); |
| command | 30 | drivers/char/lp.c | unsigned char command; |
| command | 32 | drivers/char/lp.c | command = LP_PSELECP | LP_PINITP; |
| command | 38 | drivers/char/lp.c | outb_p(command, LP_C(minor)); |
| command | 313 | drivers/net/3c505.c | OUTB(pcb->command, (adapter->io_addr)+PORT_COMMAND); |
| command | 398 | drivers/net/3c505.c | pcb->command = INB(adapter->io_addr+PORT_COMMAND); |
| command | 526 | drivers/net/3c505.c | tx_pcb->command = CMD_RECEIVE_PACKET; |
| command | 722 | drivers/net/3c505.c | switch (adapter->irx_pcb.command) { |
| command | 828 | drivers/net/3c505.c | printk("%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command); |
| command | 914 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; |
| command | 939 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_CONFIGURE_82586; |
| command | 991 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_TRANSMIT_PACKET; |
| command | 1143 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_NETWORK_STATISTICS; |
| command | 1235 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST; |
| command | 1262 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_CONFIGURE_82586; |
| command | 1489 | drivers/net/3c505.c | adapter.tx_pcb.command = CMD_STATION_ADDRESS; |
| command | 1493 | drivers/net/3c505.c | (adapter.rx_pcb.command != CMD_ADDRESS_RESPONSE) || |
| command | 92 | drivers/net/3c505dta.h | byte command; |
| command | 88 | drivers/net/apricot.c | unsigned short command; |
| command | 123 | drivers/net/apricot.c | unsigned short command; |
| command | 232 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
| command | 236 | drivers/net/apricot.c | dev->name, lp->scb.status, lp->scb.command); |
| command | 240 | drivers/net/apricot.c | lp->scb.command = RX_START; |
| command | 281 | drivers/net/apricot.c | dev->name, lp->scb.status, lp->scb.command); |
| command | 286 | drivers/net/apricot.c | lp->set_conf.command = CmdConfigure; |
| command | 290 | drivers/net/apricot.c | lp->set_add.command = CmdSASetup; |
| command | 293 | drivers/net/apricot.c | lp->tdr.command = CmdTDR; |
| command | 375 | drivers/net/apricot.c | cmd->command |= (CMD_EOL|CMD_INTR); |
| command | 385 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
| command | 389 | drivers/net/apricot.c | lp->scb.status, lp->scb.command); |
| command | 394 | drivers/net/apricot.c | lp->scb.command = CUC_START; |
| command | 412 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
| command | 416 | drivers/net/apricot.c | lp->scb.status, lp->scb.command); |
| command | 419 | drivers/net/apricot.c | lp->scb.command=CUC_ABORT|RX_ABORT; |
| command | 445 | drivers/net/apricot.c | switch ((ptr->command) & 0x7) |
| command | 474 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
| command | 478 | drivers/net/apricot.c | lp->scb.status, lp->scb.command); |
| command | 533 | drivers/net/apricot.c | lp->scb.command=CUC_ABORT|RX_ABORT; |
| command | 542 | drivers/net/apricot.c | lp->scb.command=CUC_START|RX_START; |
| command | 586 | drivers/net/apricot.c | tx_cmd->cmd.command = CMD_FLEX|CmdTx; |
| command | 706 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
| command | 709 | drivers/net/apricot.c | printk("%s: i596 interrupt, timeout status %4.4x command %4.4x.\n", dev->name, lp->scb.status, lp->scb.command); |
| command | 735 | drivers/net/apricot.c | switch ((ptr->command) & 0x7) |
| command | 802 | drivers/net/apricot.c | ptr->command &= 0x1fff; |
| command | 828 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
| command | 831 | drivers/net/apricot.c | printk("%s: i596 interrupt, timeout status %4.4x command %4.4x.\n", dev->name, lp->scb.status, lp->scb.command); |
| command | 834 | drivers/net/apricot.c | lp->scb.command = ack_cmd; |
| command | 860 | drivers/net/apricot.c | lp->scb.command = CUC_ABORT|RX_ABORT; |
| command | 903 | drivers/net/apricot.c | cmd->command = CmdMulticastList; |
| command | 97 | drivers/scsi/constants.c | void print_command (unsigned char *command) { |
| command | 99 | drivers/scsi/constants.c | print_opcode(command[0]); |
| command | 100 | drivers/scsi/constants.c | for ( i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) |
| command | 101 | drivers/scsi/constants.c | printk("%02x ", command[i]); |
| command | 101 | drivers/scsi/hosts.h | int (* command)(Scsi_Cmnd *); |
| command | 789 | drivers/scsi/scsi.c | printk("command() : routine at %08x\n", host->hostt->command); |
| command | 791 | drivers/scsi/scsi.c | temp=host->hostt->command (SCpnt); |
| command | 316 | drivers/scsi/ultrastor.c | int command) |
| command | 334 | drivers/scsi/ultrastor.c | printk(fmt, command, &config->mscp[command], config->mscp_free); |
| command | 183 | drivers/sound/dev_table.h | int (*command) (int dev, unsigned char *data); |
| command | 2425 | drivers/sound/gus_wave.c | switch (rec->command) |
| command | 1373 | drivers/sound/mpu401.c | unsigned char command = event[1]; |
| command | 1377 | drivers/sound/mpu401.c | switch (command) |
| command | 1459 | drivers/sound/mpu401.c | unsigned int command, unsigned int arg) |
| command | 1463 | drivers/sound/mpu401.c | switch (command) |
| command | 241 | drivers/sound/patmgr.c | mbox[dev]->command = event; |
| command | 252 | include/linux/soundcard.h | int command; |
| command | 819 | include/linux/soundcard.h | #define PM_LOAD_PATCH(dev, bank, pgm) (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \ |
| command | 823 | include/linux/soundcard.h | #define PM_LOAD_PATCHES(dev, bank, pgm) (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \ |
| command | 108 | include/linux/xd.h | void xd_setup (char *command,int *integers); |
| command | 123 | include/linux/xd.h | static u_char *xd_build (u_char *cmdblk,u_char command,u_char drive,u_char head,u_short cylinder,u_char sector,u_char count,u_char control); |
| command | 125 | include/linux/xd.h | static u_int xd_command (u_char *command,u_char mode,u_char *indata,u_char *outdata,u_char *sense,u_long timeout); |
| command | 136 | include/linux/xd.h | static void xd_setparam (u_char command,u_char drive,u_char heads,u_short cylinders,u_short rwrite,u_short wprecomp,u_char ecc); |