| tag | line | file | source code |
|---|
| TPQD_ALWAYS | 427 | drivers/char/tpqic02.c | if ((flags & TPQD_ALWAYS) || (flags & QIC02_TAPE_DEBUG)) |
| TPQD_ALWAYS | 473 | drivers/char/tpqic02.c | if (n >= NR_OF_EXC) { tpqputs(TPQD_ALWAYS, "Oops -- report_exception"); n = 0; } |
| TPQD_ALWAYS | 540 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[Bad block -- filler data transferred.]"); |
| TPQD_ALWAYS | 552 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[CRC failed!]"); |
| TPQD_ALWAYS | 559 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[Marginal block]"); |
| TPQD_ALWAYS | 587 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[Bad block -- filler data transferred.]"); |
| TPQD_ALWAYS | 589 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[CRC failed!]"); |
| TPQD_ALWAYS | 594 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[Marginal block]"); |
| TPQD_ALWAYS | 671 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "*** exception detected in notify_cmd"); |
| TPQD_ALWAYS | 676 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "exception persists after reset."); |
| TPQD_ALWAYS | 677 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, " ^ exception ignored."); |
| TPQD_ALWAYS | 690 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "timed out waiting for ready in notify_cmd"); |
| TPQD_ALWAYS | 701 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "timed out waiting for !ready in notify_cmd"); |
| TPQD_ALWAYS | 760 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "wait_for_ready() timed out"); |
| TPQD_ALWAYS | 765 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "exception detected after waiting_for_ready"); |
| TPQD_ALWAYS | 807 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "send_qic02_cmd: Exception!"); |
| TPQD_ALWAYS | 811 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "send_qic02_cmd: not Ready!"); |
| TPQD_ALWAYS | 830 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "send_qic02_cmd failed"); |
| TPQD_ALWAYS | 861 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "waiting looong in rdstatus() -- drive dead?"); |
| TPQD_ALWAYS | 864 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "finished waiting in rdstatus()"); |
| TPQD_ALWAYS | 881 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "rdstatus: exception error"); |
| TPQD_ALWAYS | 945 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Attempting to read Extended Status 3..."); |
| TPQD_ALWAYS | 950 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Returned status bytes:"); |
| TPQD_ALWAYS | 976 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Warning: File Mark inserted because of sense() request"); |
| TPQD_ALWAYS | 982 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "tp_sense: could not read tape drive status"); |
| TPQD_ALWAYS | 1060 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "(re-) winding failed\n"); |
| TPQD_ALWAYS | 1078 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Drive is dead. Do a `mt reset`."); |
| TPQD_ALWAYS | 1195 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "terminating pending read-cycle"); |
| TPQD_ALWAYS | 1204 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "finish_rw[read1]: ignore the 2 lines above"); |
| TPQD_ALWAYS | 1207 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "finish_rw[read2]: read cycle error"); |
| TPQD_ALWAYS | 1226 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Couldn't finish write cycle properly"); |
| TPQD_ALWAYS | 1242 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "error: drive not ready in finish_rw() !"); |
| TPQD_ALWAYS | 1446 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Cartridge is write-protected."); |
| TPQD_ALWAYS | 1469 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "RAS1 failed"); |
| TPQD_ALWAYS | 1482 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "RAS2 failed"); |
| TPQD_ALWAYS | 1614 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "wait_for_ready failed in start_dma"); |
| TPQD_ALWAYS | 1658 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "detected exception in start_dma() while transfer in progress"); |
| TPQD_ALWAYS | 1824 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "isr: exception on tape controller"); |
| TPQD_ALWAYS | 1844 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "isr: ? Tape controller not ready"); |
| TPQD_ALWAYS | 1925 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "configs not set"); |
| TPQD_ALWAYS | 2031 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "read: Oops, read more bytes than requested"); |
| TPQD_ALWAYS | 2056 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "read request for <0 bytes"); |
| TPQD_ALWAYS | 2098 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "configs not set"); |
| TPQD_ALWAYS | 2112 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Not in write mode"); |
| TPQD_ALWAYS | 2121 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Cartridge is write-protected."); |
| TPQD_ALWAYS | 2145 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "partial write"); |
| TPQD_ALWAYS | 2171 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write: start_dma() failed"); |
| TPQD_ALWAYS | 2183 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write: Oops, wrote more bytes than requested"); |
| TPQD_ALWAYS | 2200 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write: EW detected"); |
| TPQD_ALWAYS | 2204 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write: dma: error in writing"); |
| TPQD_ALWAYS | 2222 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write request for <0 bytes"); |
| TPQD_ALWAYS | 2311 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "open: sense() failed"); |
| TPQD_ALWAYS | 2320 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "No tape present."); |
| TPQD_ALWAYS | 2348 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "open: rewind failed"); |
| TPQD_ALWAYS | 2358 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "open: tape dead, attempting reset"); |
| TPQD_ALWAYS | 2364 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "open: tp_sense() failed\n"); |
| TPQD_ALWAYS | 2450 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "release: device dead!?"); |
| TPQD_ALWAYS | 2490 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Unsupported or incorrect DMA channel"); |
| TPQD_ALWAYS | 2522 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Unsupported or incorrect DMA channel"); |
| TPQD_ALWAYS | 2542 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Unsupported or incorrect DMA channel"); |
| TPQD_ALWAYS | 2546 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Invalid interface type"); |
| TPQD_ALWAYS | 2610 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtconfiginfo) does not match!"); |
| TPQD_ALWAYS | 2634 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtconfiginfo) does not match!"); |
| TPQD_ALWAYS | 2660 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Configs not set"); |
| TPQD_ALWAYS | 2670 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtop) does not match!"); |
| TPQD_ALWAYS | 2695 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Warning: negative mt_count ignored"); |
| TPQD_ALWAYS | 2725 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtget) does not match!"); |
| TPQD_ALWAYS | 2753 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtpos) does not match!"); |
| TPQD_ALWAYS | 2840 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Bogus interrupt number."); |
| TPQD_ALWAYS | 2874 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "No drive detected -- releasing irq and dma."); |
| TPQD_ALWAYS | 2959 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "No drive detected -- driver going on vacation..."); |
| TPQD_ALWAYS | 2967 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "exception detected\n"); |