tag | line | file | source code |
panic | 188 | drivers/FPU-emu/fpu_entry.c | panic("Math emulation needed in kernel"); |
panic | 319 | drivers/block/blk.h | panic(DEVICE_NAME ": request list destroyed"); \ |
panic | 322 | drivers/block/blk.h | panic(DEVICE_NAME ": block not locked"); \ |
panic | 1281 | drivers/block/cdu31a.c | panic("Unknown SONY CD cmd"); |
panic | 2174 | drivers/block/floppy.c | panic(DEVICE_NAME ": request list destroyed"); |
panic | 2176 | drivers/block/floppy.c | panic(DEVICE_NAME ": block not locked"); |
panic | 205 | drivers/block/hd.c | panic("harddisk driver problem"); |
panic | 531 | drivers/block/hd.c | panic("buffer list corrupted\n"); |
panic | 777 | drivers/block/hd.c | panic("unknown hd-command"); |
panic | 84 | drivers/block/ll_rw_blk.c | panic("get_request(%d): impossible!\n", n); |
panic | 316 | drivers/block/ll_rw_blk.c | panic("Bad block dev command, must be R/W"); |
panic | 630 | drivers/block/mcd.c | panic(DEVICE_NAME ": block not locked"); |
panic | 54 | drivers/block/ramdisk.c | panic("RAMDISK: unknown RAM disk command !\n"); |
panic | 1567 | drivers/char/console.c | panic("Couldn't register console driver\n"); |
panic | 259 | drivers/char/pty.c | panic("Couldn't register pty driver"); |
panic | 261 | drivers/char/pty.c | panic("Couldn't register pty slave driver"); |
panic | 2321 | drivers/char/serial.c | panic("Couldn't register serial driver\n"); |
panic | 2323 | drivers/char/serial.c | panic("Couldn't register callout driver\n"); |
panic | 1649 | drivers/char/tpqic02.c | panic(TPQIC02_NAME ": invalid mode in start_dma()"); |
panic | 196 | drivers/char/tty_io.c | panic("Couldn't open N_TTY ldisc for " |
panic | 1591 | drivers/char/tty_io.c | panic("size of tty structure > PAGE_SIZE!"); |
panic | 1593 | drivers/char/tty_io.c | panic("unable to get major %d for tty device", TTY_MAJOR); |
panic | 1595 | drivers/char/tty_io.c | panic("unable to get major %d for tty device", TTYAUX_MAJOR); |
panic | 1425 | drivers/scsi/53c7,8xx.c | panic("scsi%d : break point interrupt from %p with no breakpoint!", |
panic | 2362 | drivers/scsi/53c7,8xx.c | panic ("scsi%d : scan_scsis_buf too small (need %d bytes)\n", |
panic | 2375 | drivers/scsi/53c7,8xx.c | panic ("scsi%d : pid %d dsa structure not dword aligned!\n", |
panic | 3152 | drivers/scsi/53c7,8xx.c | panic("dying...\n"); |
panic | 3429 | drivers/scsi/53c7,8xx.c | panic(" "); |
panic | 3452 | drivers/scsi/53c7,8xx.c | panic(" mail drew@colorad.edu\n"); |
panic | 3506 | drivers/scsi/53c7,8xx.c | panic(" mail drew@Colorado.EDU\n"); |
panic | 3526 | drivers/scsi/53c7,8xx.c | panic(" mail drew@Colorado.EDU\n"); |
panic | 3555 | drivers/scsi/53c7,8xx.c | panic(" dstat_sir_intr() returned SPECIFIC_INT_PANIC\n"); |
panic | 3563 | drivers/scsi/53c7,8xx.c | panic(" dstat_sir_intr() returned unknown value %d\n", |
panic | 1093 | drivers/scsi/NCR5380.c | panic("scsi%d : received end of DMA interrupt with no connected cmd\n", |
panic | 319 | drivers/scsi/NCR5380.h | panic ("scsi%d : attempted unaligned DMA transfer\n", instance->host_no); |
panic | 471 | drivers/scsi/aha152x.c | panic("aha152x: aha152x_setup called twice.\n"); |
panic | 520 | drivers/scsi/aha152x.c | panic("aha152x panics in line %d", __LINE__); |
panic | 534 | drivers/scsi/aha152x.c | panic("aha152x panics in line %d", __LINE__); |
panic | 540 | drivers/scsi/aha152x.c | panic("aha152x panics in line %d", __LINE__); |
panic | 549 | drivers/scsi/aha152x.c | panic("aha152x panics in line %d", __LINE__); |
panic | 555 | drivers/scsi/aha152x.c | panic("aha152x panics in line %d", __LINE__); |
panic | 561 | drivers/scsi/aha152x.c | panic("aha152x panics in line %d", __LINE__); |
panic | 646 | drivers/scsi/aha152x.c | panic("aha152x: driver needs an IRQ.\n"); |
panic | 1067 | drivers/scsi/aha152x.c | panic( "aha152x: current_SC->scsi_done() == NULL" ); |
panic | 2067 | drivers/scsi/aha152x.c | panic("aha152x panic"); |
panic | 2293 | drivers/scsi/aha152x.c | panic("aha152x: already in driver\n"); |
panic | 2308 | drivers/scsi/aha152x.c | panic("aha152x: %s already left driver.\n"); |
panic | 331 | drivers/scsi/aha1542.c | if(!shost) panic("Splunge!"); |
panic | 536 | drivers/scsi/aha1542.c | panic("Unable to find empty mailbox for aha1542.\n"); |
panic | 573 | drivers/scsi/aha1542.c | if (cptr == NULL) panic("aha1542.c: unable to allocate DMA memory\n"); |
panic | 586 | drivers/scsi/aha1542.c | panic("Foooooooood fight!"); |
panic | 631 | drivers/scsi/aha1542.c | panic("Buffer at address > 16Mb used for 1542B"); |
panic | 222 | drivers/scsi/aha1740.c | panic("aha1740.c"); /* Goodbye */ |
panic | 288 | drivers/scsi/aha1740.c | panic("Unable to find empty ecb for aha1740.\n"); |
panic | 321 | drivers/scsi/aha1740.c | if (cptr == NULL) panic("aha1740.c: unable to allocate DMA memory\n"); |
panic | 439 | drivers/scsi/buslogic.c | panic("buslogic.c: NULL SCSI host entry"); |
panic | 678 | drivers/scsi/buslogic.c | panic("buslogic.c: unable to find empty mailbox"); |
panic | 719 | drivers/scsi/buslogic.c | panic("buslogic.c: unable to allocate DMA memory"); |
panic | 726 | drivers/scsi/buslogic.c | panic("buslogic.c: bad segment list"); |
panic | 649 | drivers/scsi/fdomain.c | panic( "Future Domain: *NO* interrupt level selected!\n" ); |
panic | 669 | drivers/scsi/fdomain.c | panic( "Future Domain: Driver requires interruptions\n" ); |
panic | 842 | drivers/scsi/fdomain.c | else panic( "Future Domain: current_SC->scsi_done() == NULL" ); |
panic | 844 | drivers/scsi/fdomain.c | panic( "Future Domain: my_done() called outside of command\n" ); |
panic | 1279 | drivers/scsi/fdomain.c | panic( "Future Domain: fdomain_16x0_queue() NOT REENTRANT!\n" ); |
panic | 202 | drivers/scsi/hosts.c | if(j > 0xffff) panic("Too many extra bytes requested\n"); |
panic | 237 | drivers/scsi/hosts.c | if(sdpnt->next) panic("Device already registered"); |
panic | 269 | drivers/scsi/hosts.c | panic("Failure to register low-level scsi driver"); |
panic | 39 | drivers/scsi/scsi.c | #define INTERNAL_ERROR (panic ("Internal error in file %s, line %d.\n", __FILE__, __LINE__)) |
panic | 566 | drivers/scsi/scsi.c | panic ("No device passed to allocate_device().\n"); |
panic | 569 | drivers/scsi/scsi.c | panic("Invalid device in allocate_device"); |
panic | 647 | drivers/scsi/scsi.c | panic ("No device passed to allocate_device().\n"); |
panic | 679 | drivers/scsi/scsi.c | panic("No device found in allocate_device\n"); |
panic | 745 | drivers/scsi/scsi.c | panic("Kernel stack overflow."); |
panic | 861 | drivers/scsi/scsi.c | panic ("Invalid or not present host. %d\n", host->host_no); |
panic | 1200 | drivers/scsi/scsi.c | panic("scsi: unsupported message byte %d received\n", msg_byte(result)); |
panic | 1678 | drivers/scsi/scsi.c | if (offset < 0) panic("Bad offset"); |
panic | 1681 | drivers/scsi/scsi.c | if(sector >= dma_sectors) panic ("Bad page"); |
panic | 1687 | drivers/scsi/scsi.c | if ((mask << sector) > 0xffff) panic ("Bad memory alignment"); |
panic | 1691 | drivers/scsi/scsi.c | panic("Trying to free unused memory"); |
panic | 573 | drivers/scsi/scsi.h | panic(DEVICE_NAME ": request list destroyed"); \ |
panic | 576 | drivers/scsi/scsi.h | panic(DEVICE_NAME ": block not locked"); \ |
panic | 65 | drivers/scsi/scsi_debug.c | if (bufflen != 1024) {printk("%d", bufflen); panic("(1)Bad bufflen");}; \ |
panic | 69 | drivers/scsi/scsi_debug.c | if (bh->b_size != 1024) panic ("Wrong bh size"); \ |
panic | 72 | drivers/scsi/scsi_debug.c | panic ("Wrong bh block#");}; \ |
panic | 73 | drivers/scsi/scsi_debug.c | if (bh->b_dev != SCpnt->request.dev) panic ("Bad bh target");\ |
panic | 81 | drivers/scsi/scsi_debug.c | panic ("Bad target");}; \ |
panic | 86 | drivers/scsi/scsi_debug.c | if (bufflen != 1024 && (!SCpnt->use_sg)) {printk("%x %d\n ",bufflen, SCpnt->use_sg); panic("Bad bufflen");}; \ |
panic | 88 | drivers/scsi/scsi_debug.c | if ((SCpnt->request.dev & 0xf) > npart) panic ("Bad partition"); \ |
panic | 90 | drivers/scsi/scsi_debug.c | if (SCpnt->request.cmd != RW) panic ("Wrong operation"); \ |
panic | 91 | drivers/scsi/scsi_debug.c | if (SCpnt->request.sector + start != block) panic("Wrong block."); \ |
panic | 92 | drivers/scsi/scsi_debug.c | if (SCpnt->request.current_nr_sectors != 2 && (!SCpnt->use_sg)) panic ("Wrong # blocks"); \ |
panic | 94 | drivers/scsi/scsi_debug.c | if (SCpnt->request.bh->b_size != 1024) panic ("Wrong bh size"); \ |
panic | 97 | drivers/scsi/scsi_debug.c | panic ("Wrong bh block#");}; \ |
panic | 98 | drivers/scsi/scsi_debug.c | if (SCpnt->request.bh->b_dev != SCpnt->request.dev) panic ("Bad bh target");\ |
panic | 328 | drivers/scsi/scsi_debug.c | if(!bh) panic("Too few blocks for linked request."); |
panic | 355 | drivers/scsi/scsi_debug.c | panic ("Trying to write wrong number of blocks\n"); |
panic | 363 | drivers/scsi/scsi_debug.c | panic("Bad block written.\n"); |
panic | 381 | drivers/scsi/scsi_debug.c | panic("Unable to find empty SCSI_DEBUG command slot.\n"); |
panic | 225 | drivers/scsi/sd.c | panic("sd.c: linked page request (%lx %x)", |
panic | 461 | drivers/scsi/sd.c | panic ("Unknown sd command %d\n", SCpnt->request.cmd); |
panic | 662 | drivers/scsi/sd.c | panic("Ooops"); |
panic | 685 | drivers/scsi/sd.c | if(!buff) panic("Ran out of DMA buffers."); |
panic | 700 | drivers/scsi/sd.c | if(block & 1) panic("sd.c:Bad block number requested"); |
panic | 701 | drivers/scsi/sd.c | if(this_count & 1) panic("sd.c:Bad block number requested"); |
panic | 1084 | drivers/scsi/sd.c | panic ("scsi_devices corrupt (sd)"); |
panic | 1089 | drivers/scsi/sd.c | if(i >= sd_template.dev_max) panic ("scsi_devices corrupt (sd)"); |
panic | 484 | drivers/scsi/seagate.c | if(!SCint) panic("SCint == NULL in seagate"); |
panic | 357 | drivers/scsi/sg.c | panic ("scsi_devices corrupt (sg)"); |
panic | 362 | drivers/scsi/sg.c | if(i >= sg_template.dev_max) panic ("scsi_devices corrupt (sg)"); |
panic | 194 | drivers/scsi/sr.c | panic("sr.c: linked page request (%lx %x)", |
panic | 419 | drivers/scsi/sr.c | panic ("Unknown sr command %d\n", SCpnt->request.cmd); |
panic | 490 | drivers/scsi/sr.c | if(!sgpnt[count].address) panic("SCSI DMA pool exhausted."); |
panic | 503 | drivers/scsi/sr.c | if(!sgpnt[count].address) panic("SCSI DMA pool exhausted."); |
panic | 506 | drivers/scsi/sr.c | if (count+1 != SCpnt->use_sg) panic("Bad sr request list"); |
panic | 673 | drivers/scsi/sr.c | panic ("scsi_devices corrupt (sr)"); |
panic | 678 | drivers/scsi/sr.c | if(i >= sr_template.dev_max) panic ("scsi_devices corrupt (sr)"); |
panic | 684 | drivers/scsi/sr.c | panic ("scsi_devices corrupt (sr)"); |
panic | 1697 | drivers/scsi/st.c | panic ("scsi_devices corrupt (st)"); |
panic | 1702 | drivers/scsi/st.c | if(i >= st_template.dev_max) panic ("scsi_devices corrupt (st)"); |
panic | 294 | drivers/scsi/ultrastor.c | if (*field == 0) panic("No free mscp"); |
panic | 673 | drivers/scsi/ultrastor.c | panic("ultrastor_queuecommand: no free MSCP\n"); |
panic | 834 | drivers/scsi/ultrastor.c | panic("Ux4F aborting invalid MSCP"); |
panic | 927 | drivers/scsi/ultrastor.c | if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort"); |
panic | 628 | drivers/scsi/wd7000.c | panic("wd7000: can't get enough free SCBs.\n"); |
panic | 921 | drivers/scsi/wd7000.c | panic("wd7000_queuecommand: scatter/gather not supported.\n"); |
panic | 124 | drivers/sound/dev_table.c | panic ("snd: Invalid memory allocation\n"); |
panic | 142 | drivers/sound/dev_table.c | panic ("snd#: Invalid memory allocation\n"); |
panic | 335 | drivers/sound/soundcard.c | panic ("sound_mem_init: Page not free (driver incompatible with kernel).\n"); |
panic | 287 | fs/buffer.c | panic("VFS: LRU block list corrupted"); |
panic | 288 | fs/buffer.c | if (bh->b_dev == 0xffff) panic("LRU list corrupted"); |
panic | 303 | fs/buffer.c | panic("VFS: Free block list corrupted"); |
panic | 304 | fs/buffer.c | if(bh->b_dev != 0xffff) panic("Free list corrupted"); |
panic | 306 | fs/buffer.c | panic("Free list empty"); |
panic | 340 | fs/buffer.c | if(bh->b_dev == 0xffff) panic("Wrong block for lru list"); |
panic | 389 | fs/buffer.c | if (bh->b_next_free) panic("VFS: buffer LRU pointers corrupted"); |
panic | 454 | fs/buffer.c | default: panic("Invalid blocksize passed to set_blocksize"); |
panic | 550 | fs/buffer.c | if(buffers[i] < 0) panic("Here is the problem"); |
panic | 577 | fs/buffer.c | if(candidate[i] && candidate[i]->b_count) panic("Here is the problem"); |
panic | 601 | fs/buffer.c | panic("Busy buffer in candidate list\n"); |
panic | 603 | fs/buffer.c | panic("Shared buffer in candidate list\n"); |
panic | 604 | fs/buffer.c | if (BADNESS(bh)) panic("Buffer in candidate list with BADNESS != 0\n"); |
panic | 606 | fs/buffer.c | if(bh->b_dev == 0xffff) panic("Wrong list"); |
panic | 612 | fs/buffer.c | if(buffers[i] < 0) panic("Here is the problem"); |
panic | 619 | fs/buffer.c | if(buffers[i] <= 0) panic("Here is another problem"); |
panic | 621 | fs/buffer.c | if(buffers[i] < 0) panic("Here is the problem"); |
panic | 649 | fs/buffer.c | panic("Here is the problem"); |
panic | 747 | fs/buffer.c | if(buf->b_dev == 0xffff) panic("Attempt to refile free buffer\n"); |
panic | 754 | fs/buffer.c | if(dispose == -1) panic("Bad buffer settings (%d)\n", i); |
panic | 1618 | fs/buffer.c | panic("VFS: Unable to initialize buffer free list!"); |
panic | 406 | fs/exec.c | panic("VFS: argc is wrong"); |
panic | 76 | fs/ext/freelists.c | panic ("ext_free_block: unable to read block to free\n"); |
panic | 121 | fs/ext/freelists.c | panic ("ext_new_block: unable to read next free block\n"); |
panic | 230 | fs/ext/freelists.c | panic("ext_free_inode: unable to read inode block\n"); |
panic | 274 | fs/ext/freelists.c | panic ("ext_new_inode: bad inode number in free list\n"); |
panic | 284 | fs/ext/freelists.c | panic ("ext_new_inode: unable to read next free inode block\n"); |
panic | 326 | fs/ext/freelists.c | panic ("ext_count_fre_inodes: bad inode number in free list\n"); |
panic | 359 | fs/ext/inode.c | panic("unable to read i-node block"); |
panic | 397 | fs/ext/inode.c | panic("unable to read i-node block"); |
panic | 47 | fs/ext2/super.c | panic ("EXT2-fs panic (device %d/%d): %s: %s\n", |
panic | 74 | fs/ext2/super.c | panic ("EXT2-fs panic (device %d/%d): %s: %s\n", |
panic | 431 | fs/inode.c | panic("VFS: iget with sb==NULL"); |
panic | 407 | fs/isofs/rock.c | panic("Cannot have symlink with high sierra variant of iso filesystem\n"); |
panic | 431 | fs/locks.c | panic("alloc_lock: broken free list\n"); |
panic | 457 | fs/locks.c | panic("free_lock: broken lock list\n"); |
panic | 123 | fs/minix/inode.c | panic("bad i-node size"); |
panic | 337 | fs/msdos/inode.c | panic("msdos_read_inode: unable to read i-node block"); |
panic | 400 | fs/msdos/inode.c | panic("msdos_write_inode: unable to read i-node block"); |
panic | 461 | fs/msdos/misc.c | if (!S_ISDIR(dir->i_mode)) panic("Non-directory fed to m_p_i"); |
panic | 676 | fs/super.c | panic("VFS: Unable to mount root fs on %02x:%02x", |
panic | 95 | fs/sysv/balloc.c | default: panic("sysv_free_block: invalid fs type\n"); |
panic | 202 | fs/sysv/balloc.c | default: panic("sysv_new_block: invalid fs type\n"); |
panic | 299 | fs/sysv/balloc.c | default: panic("sysv_count_free_blocks: invalid fs type\n"); |
panic | 273 | fs/sysv/inode.c | panic("Xenix FS: bad super-block size"); |
panic | 276 | fs/sysv/inode.c | panic("SystemV FS: bad super-block size"); |
panic | 278 | fs/sysv/inode.c | panic("Coherent FS: bad super-block size"); |
panic | 280 | fs/sysv/inode.c | panic("sysv fs: bad i-node size"); |
panic | 40 | include/linux/kernel.h | NORET_TYPE void panic(const char * fmt, ...) |
panic | 103 | kernel/exit.c | panic("trying to release non-existent task"); |
panic | 136 | kernel/ksyms.c | X(panic), |
panic | 346 | kernel/sched.c | panic("task[0] trying to sleep"); |
panic | 813 | kernel/sched.c | panic("Struct sigaction MUST be 16 bytes"); |
panic | 833 | kernel/sched.c | panic("Could not allocate timer IRQ!"); |
panic | 143 | mm/kmalloc.c | panic ("This only happens if someone messes with kmalloc"); |
panic | 140 | mm/memory.c | panic("task[0] (swapper) doesn't support exec()\n"); |
panic | 179 | mm/memory.c | panic("Trying to free up swapper memory space"); |