| tag | line | file | source code |
|---|
| R | 154 | drivers/scsi/constants.c | {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, |
| R | 167 | drivers/scsi/constants.c | {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"}, |
| R | 168 | drivers/scsi/constants.c | {0x00,0x11,R,"Audio play operation in progress"}, |
| R | 169 | drivers/scsi/constants.c | {0x00,0x12,R,"Audio play operation paused"}, |
| R | 170 | drivers/scsi/constants.c | {0x00,0x13,R,"Audio play operation successfully completed"}, |
| R | 171 | drivers/scsi/constants.c | {0x00,0x14,R,"Audio play operation stopped due to error"}, |
| R | 172 | drivers/scsi/constants.c | {0x00,0x15,R,"No current audio status to return"}, |
| R | 174 | drivers/scsi/constants.c | {0x02,0x00,D|W|R|O|M,"No seek complete"}, |
| R | 178 | drivers/scsi/constants.c | {0x04,0x00,D|T|L|P|W|R|S|O|M|C, |
| R | 180 | drivers/scsi/constants.c | {0x04,0x01,D|T|L|P|W|R|S|O|M|C, |
| R | 182 | drivers/scsi/constants.c | {0x04,0x02,D|T|L|P|W|R|S|O|M|C, |
| R | 184 | drivers/scsi/constants.c | {0x04,0x03,D|T|L|P|W|R|S|O|M|C, |
| R | 187 | drivers/scsi/constants.c | {0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"}, |
| R | 188 | drivers/scsi/constants.c | {0x06,0x00,D|W|R|O|M,"No reference position found"}, |
| R | 189 | drivers/scsi/constants.c | {0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"}, |
| R | 190 | drivers/scsi/constants.c | {0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"}, |
| R | 191 | drivers/scsi/constants.c | {0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"}, |
| R | 192 | drivers/scsi/constants.c | {0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"}, |
| R | 193 | drivers/scsi/constants.c | {0x09,0x00,D|T|W|R|O,"Track following error"}, |
| R | 194 | drivers/scsi/constants.c | {0x09,0x01,W|R|O,"Tracking servo failure"}, |
| R | 195 | drivers/scsi/constants.c | {0x09,0x02,W|R|O,"Focus servo failure"}, |
| R | 196 | drivers/scsi/constants.c | {0x09,0x03,W|R|O,"Spindle servo failure"}, |
| R | 197 | drivers/scsi/constants.c | {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"}, |
| R | 202 | drivers/scsi/constants.c | {0x11,0x00,D|T|W|R|S|O,"Unrecovered read error"}, |
| R | 207 | drivers/scsi/constants.c | {0x11,0x05,W|R|O,"L-ec uncorrectable error"}, |
| R | 208 | drivers/scsi/constants.c | {0x11,0x06,W|R|O,"Circ unrecovered error"}, |
| R | 217 | drivers/scsi/constants.c | {0x14,0x00,D|T|L|W|R|S|O,"Recorded entity not found"}, |
| R | 218 | drivers/scsi/constants.c | {0x14,0x01,D|T|W|R|O,"Record not found"}, |
| R | 222 | drivers/scsi/constants.c | {0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"}, |
| R | 223 | drivers/scsi/constants.c | {0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"}, |
| R | 224 | drivers/scsi/constants.c | {0x15,0x02,D|T|W|R|O,"Positioning error detected by read of medium"}, |
| R | 226 | drivers/scsi/constants.c | {0x17,0x00,D|T|W|R|S|O,"Recovered data with no error correction applied"}, |
| R | 227 | drivers/scsi/constants.c | {0x17,0x01,D|T|W|R|S|O,"Recovered data with retries"}, |
| R | 228 | drivers/scsi/constants.c | {0x17,0x02,D|T|W|R|O,"Recovered data with positive head offset"}, |
| R | 229 | drivers/scsi/constants.c | {0x17,0x03,D|T|W|R|O,"Recovered data with negative head offset"}, |
| R | 230 | drivers/scsi/constants.c | {0x17,0x04,W|R|O,"Recovered data with retries and/or circ applied"}, |
| R | 231 | drivers/scsi/constants.c | {0x17,0x05,D|W|R|O,"Recovered data using previous sector id"}, |
| R | 234 | drivers/scsi/constants.c | {0x18,0x00,D|T|W|R|O,"Recovered data with error correction applied"}, |
| R | 235 | drivers/scsi/constants.c | {0x18,0x01,D|W|R|O,"Recovered data with error correction and retries applied"}, |
| R | 236 | drivers/scsi/constants.c | {0x18,0x02,D|W|R|O,"Recovered data - data auto-reallocated"}, |
| R | 237 | drivers/scsi/constants.c | {0x18,0x03,R,"Recovered data with circ"}, |
| R | 238 | drivers/scsi/constants.c | {0x18,0x04,R,"Recovered data with lec"}, |
| R | 239 | drivers/scsi/constants.c | {0x18,0x05,D|W|R|O,"Recovered data - recommend reassignment"}, |
| R | 244 | drivers/scsi/constants.c | {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"}, |
| R | 245 | drivers/scsi/constants.c | {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"}, |
| R | 251 | drivers/scsi/constants.c | {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"}, |
| R | 252 | drivers/scsi/constants.c | {0x21,0x00,D|T|W|R|O|M,"Logical block address out of range"}, |
| R | 255 | drivers/scsi/constants.c | {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"}, |
| R | 256 | drivers/scsi/constants.c | {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"}, |
| R | 257 | drivers/scsi/constants.c | {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"}, |
| R | 258 | drivers/scsi/constants.c | {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"}, |
| R | 259 | drivers/scsi/constants.c | {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"}, |
| R | 260 | drivers/scsi/constants.c | {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"}, |
| R | 262 | drivers/scsi/constants.c | {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"}, |
| R | 264 | drivers/scsi/constants.c | {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"}, |
| R | 265 | drivers/scsi/constants.c | {0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"}, |
| R | 266 | drivers/scsi/constants.c | {0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"}, |
| R | 267 | drivers/scsi/constants.c | {0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"}, |
| R | 268 | drivers/scsi/constants.c | {0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"}, |
| R | 269 | drivers/scsi/constants.c | {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"}, |
| R | 273 | drivers/scsi/constants.c | {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"}, |
| R | 274 | drivers/scsi/constants.c | {0x30,0x00,D|T|W|R|O|M,"Incompatible medium installed"}, |
| R | 275 | drivers/scsi/constants.c | {0x30,0x01,D|T|W|R|O,"Cannot read medium - unknown format"}, |
| R | 276 | drivers/scsi/constants.c | {0x30,0x02,D|T|W|R|O,"Cannot read medium - incompatible format"}, |
| R | 284 | drivers/scsi/constants.c | {0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"}, |
| R | 285 | drivers/scsi/constants.c | {0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"}, |
| R | 286 | drivers/scsi/constants.c | {0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"}, |
| R | 302 | drivers/scsi/constants.c | {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"}, |
| R | 303 | drivers/scsi/constants.c | {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"}, |
| R | 304 | drivers/scsi/constants.c | {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"}, |
| R | 305 | drivers/scsi/constants.c | {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"}, |
| R | 306 | drivers/scsi/constants.c | {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"}, |
| R | 307 | drivers/scsi/constants.c | {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"}, |
| R | 308 | drivers/scsi/constants.c | {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"}, |
| R | 309 | drivers/scsi/constants.c | {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"}, |
| R | 310 | drivers/scsi/constants.c | {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"}, |
| R | 311 | drivers/scsi/constants.c | {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"}, |
| R | 312 | drivers/scsi/constants.c | {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"}, |
| R | 313 | drivers/scsi/constants.c | {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"}, |
| R | 314 | drivers/scsi/constants.c | {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"}, |
| R | 315 | drivers/scsi/constants.c | {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"}, |
| R | 316 | drivers/scsi/constants.c | {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"}, |
| R | 317 | drivers/scsi/constants.c | {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"}, |
| R | 318 | drivers/scsi/constants.c | {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"}, |
| R | 324 | drivers/scsi/constants.c | {0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"}, |
| R | 326 | drivers/scsi/constants.c | {0x53,0x02,D|T|W|R|O|M,"Medium removal prevented"}, |
| R | 329 | drivers/scsi/constants.c | {0x57,0x00,R,"Unable to recover table-of-contents"}, |
| R | 332 | drivers/scsi/constants.c | {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"}, |
| R | 333 | drivers/scsi/constants.c | {0x5A,0x01,D|T|W|R|O|M,"Operator medium removal request"}, |
| R | 336 | drivers/scsi/constants.c | {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"}, |
| R | 337 | drivers/scsi/constants.c | {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"}, |
| R | 338 | drivers/scsi/constants.c | {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"}, |
| R | 339 | drivers/scsi/constants.c | {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"}, |
| R | 348 | drivers/scsi/constants.c | {0x63,0x00,R,"End of user area encountered on this track"}, |
| R | 349 | drivers/scsi/constants.c | {0x64,0x00,R,"Illegal mode for this track"}, |