| tag | line | file | source code |
|---|
| S | 154 | drivers/scsi/constants.c | {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, |
| S | 163 | drivers/scsi/constants.c | {0x00,0x02,T|S,"End-of-partition/medium detected"}, |
| S | 165 | drivers/scsi/constants.c | {0x00,0x04,T|S,"Beginning-of-partition/medium detected"}, |
| S | 166 | drivers/scsi/constants.c | {0x00,0x05,T|S,"End-of-data detected"}, |
| S | 167 | drivers/scsi/constants.c | {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"}, |
| S | 175 | drivers/scsi/constants.c | {0x03,0x00,D|T|L|W|S|O,"Peripheral device write fault"}, |
| S | 178 | drivers/scsi/constants.c | {0x04,0x00,D|T|L|P|W|R|S|O|M|C, |
| S | 180 | drivers/scsi/constants.c | {0x04,0x01,D|T|L|P|W|R|S|O|M|C, |
| S | 182 | drivers/scsi/constants.c | {0x04,0x02,D|T|L|P|W|R|S|O|M|C, |
| S | 184 | drivers/scsi/constants.c | {0x04,0x03,D|T|L|P|W|R|S|O|M|C, |
| S | 187 | drivers/scsi/constants.c | {0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"}, |
| S | 189 | drivers/scsi/constants.c | {0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"}, |
| S | 190 | drivers/scsi/constants.c | {0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"}, |
| S | 191 | drivers/scsi/constants.c | {0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"}, |
| S | 192 | drivers/scsi/constants.c | {0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"}, |
| S | 197 | drivers/scsi/constants.c | {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"}, |
| S | 198 | drivers/scsi/constants.c | {0x0C,0x00,T|S,"Write error"}, |
| S | 202 | drivers/scsi/constants.c | {0x11,0x00,D|T|W|R|S|O,"Unrecovered read error"}, |
| S | 203 | drivers/scsi/constants.c | {0x11,0x01,D|T|W|S|O,"Read retries exhausted"}, |
| S | 204 | drivers/scsi/constants.c | {0x11,0x02,D|T|W|S|O,"Error too long to correct"}, |
| S | 205 | drivers/scsi/constants.c | {0x11,0x03,D|T|W|S|O,"Multiple read errors"}, |
| S | 217 | drivers/scsi/constants.c | {0x14,0x00,D|T|L|W|R|S|O,"Recorded entity not found"}, |
| S | 222 | drivers/scsi/constants.c | {0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"}, |
| S | 223 | drivers/scsi/constants.c | {0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"}, |
| S | 226 | drivers/scsi/constants.c | {0x17,0x00,D|T|W|R|S|O,"Recovered data with no error correction applied"}, |
| S | 227 | drivers/scsi/constants.c | {0x17,0x01,D|T|W|R|S|O,"Recovered data with retries"}, |
| S | 244 | drivers/scsi/constants.c | {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"}, |
| S | 245 | drivers/scsi/constants.c | {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"}, |
| S | 251 | drivers/scsi/constants.c | {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"}, |
| S | 255 | drivers/scsi/constants.c | {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"}, |
| S | 256 | drivers/scsi/constants.c | {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"}, |
| S | 257 | drivers/scsi/constants.c | {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"}, |
| S | 258 | drivers/scsi/constants.c | {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"}, |
| S | 259 | drivers/scsi/constants.c | {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"}, |
| S | 260 | drivers/scsi/constants.c | {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"}, |
| S | 262 | drivers/scsi/constants.c | {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"}, |
| S | 264 | drivers/scsi/constants.c | {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"}, |
| S | 265 | drivers/scsi/constants.c | {0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"}, |
| S | 266 | drivers/scsi/constants.c | {0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"}, |
| S | 267 | drivers/scsi/constants.c | {0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"}, |
| S | 268 | drivers/scsi/constants.c | {0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"}, |
| S | 269 | drivers/scsi/constants.c | {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"}, |
| S | 270 | drivers/scsi/constants.c | {0x2C,0x01,S,"Too many windows specified"}, |
| S | 271 | drivers/scsi/constants.c | {0x2C,0x02,S,"Invalid combination of windows specified"}, |
| S | 273 | drivers/scsi/constants.c | {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"}, |
| S | 284 | drivers/scsi/constants.c | {0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"}, |
| S | 285 | drivers/scsi/constants.c | {0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"}, |
| S | 286 | drivers/scsi/constants.c | {0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"}, |
| S | 296 | drivers/scsi/constants.c | {0x3B,0x09,S,"Read past end of medium"}, |
| S | 297 | drivers/scsi/constants.c | {0x3B,0x0A,S,"Read past beginning of medium"}, |
| S | 298 | drivers/scsi/constants.c | {0x3B,0x0B,S,"Position past end of medium"}, |
| S | 299 | drivers/scsi/constants.c | {0x3B,0x0C,S,"Position past beginning of medium"}, |
| S | 302 | drivers/scsi/constants.c | {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"}, |
| S | 303 | drivers/scsi/constants.c | {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"}, |
| S | 304 | drivers/scsi/constants.c | {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"}, |
| S | 305 | drivers/scsi/constants.c | {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"}, |
| S | 306 | drivers/scsi/constants.c | {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"}, |
| S | 307 | drivers/scsi/constants.c | {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"}, |
| S | 308 | drivers/scsi/constants.c | {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"}, |
| S | 309 | drivers/scsi/constants.c | {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"}, |
| S | 310 | drivers/scsi/constants.c | {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"}, |
| S | 311 | drivers/scsi/constants.c | {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"}, |
| S | 312 | drivers/scsi/constants.c | {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"}, |
| S | 313 | drivers/scsi/constants.c | {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"}, |
| S | 314 | drivers/scsi/constants.c | {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"}, |
| S | 315 | drivers/scsi/constants.c | {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"}, |
| S | 316 | drivers/scsi/constants.c | {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"}, |
| S | 317 | drivers/scsi/constants.c | {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"}, |
| S | 318 | drivers/scsi/constants.c | {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"}, |
| S | 324 | drivers/scsi/constants.c | {0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"}, |
| S | 332 | drivers/scsi/constants.c | {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"}, |
| S | 336 | drivers/scsi/constants.c | {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"}, |
| S | 337 | drivers/scsi/constants.c | {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"}, |
| S | 338 | drivers/scsi/constants.c | {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"}, |
| S | 339 | drivers/scsi/constants.c | {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"}, |
| S | 343 | drivers/scsi/constants.c | {0x60,0x00,S,"Lamp failure"}, |
| S | 344 | drivers/scsi/constants.c | {0x61,0x00,S,"Video acquisition error"}, |
| S | 345 | drivers/scsi/constants.c | {0x61,0x01,S,"Unable to acquire video"}, |
| S | 346 | drivers/scsi/constants.c | {0x61,0x02,S,"Out of focus"}, |
| S | 347 | drivers/scsi/constants.c | {0x62,0x00,S,"Scan head positioning error"}, |
| S | 82 | include/linux/net.h | #define SOCK_INODE(S) ((S)->inode) |