| tag | line | file | source code |
|---|
| CONTROL | 113 | drivers/scsi/aha1542.c | #define aha1542_intr_reset(base) outb(IRST, CONTROL(base)) |
| CONTROL | 288 | drivers/scsi/aha1542.c | outb(SRST|IRST/*|SCRST*/, CONTROL(bse)); |
| CONTROL | 328 | drivers/scsi/aha1542.c | outb(IRST, CONTROL(bse)); |
| CONTROL | 1159 | drivers/scsi/aha1542.c | outb(SCRST, CONTROL(SCpnt->host->io_port)); |
| CONTROL | 169 | drivers/scsi/buslogic.c | #define INTR_RESET(base) outb(RINT, CONTROL(base)) |
| CONTROL | 955 | drivers/scsi/buslogic.c | outb(RSOFT | RINT/* | RSBUS*/, CONTROL(base)); |
| CONTROL | 1420 | drivers/scsi/buslogic.c | outb(RSBUS, CONTROL(scpnt->host->io_port)); |
| CONTROL | 392 | drivers/scsi/in2000.c | outb(CONTROL,INSTAT); |
| CONTROL | 534 | drivers/scsi/in2000.c | outb(CONTROL,INSTAT); /* WD BUS Mode */ |
| CONTROL | 714 | drivers/scsi/seagate.c | CONTROL = (BASE_CMD | CMD_DRVR_ENABLE | CMD_BSY); |
| CONTROL | 716 | drivers/scsi/seagate.c | CONTROL = (BASE_CMD | CMD_BSY); |
| CONTROL | 728 | drivers/scsi/seagate.c | CONTROL = (BASE_CMD | CMD_INTR); |
| CONTROL | 736 | drivers/scsi/seagate.c | CONTROL = BASE_CMD; |
| CONTROL | 802 | drivers/scsi/seagate.c | CONTROL = 0; |
| CONTROL | 804 | drivers/scsi/seagate.c | CONTROL = CMD_START_ARB; |
| CONTROL | 816 | drivers/scsi/seagate.c | CONTROL = BASE_CMD; |
| CONTROL | 840 | drivers/scsi/seagate.c | CONTROL = BASE_CMD | CMD_DRVR_ENABLE | CMD_SEL | |
| CONTROL | 878 | drivers/scsi/seagate.c | CONTROL = BASE_CMD; |
| CONTROL | 937 | drivers/scsi/seagate.c | CONTROL = BASE_CMD | CMD_DRVR_ENABLE | |
| CONTROL | 1318 | drivers/scsi/seagate.c | CONTROL = BASE_CMD | CMD_DRVR_ENABLE; |
| CONTROL | 1537 | drivers/scsi/seagate.c | CONTROL = BASE_CMD | CMD_INTR ; |
| CONTROL | 1539 | drivers/scsi/seagate.c | CONTROL = BASE_CMD; |
| CONTROL | 1570 | drivers/scsi/seagate.c | CONTROL = BASE_CMD | CMD_RST; |
| CONTROL | 1578 | drivers/scsi/seagate.c | CONTROL = BASE_CMD; |