root/include/linux/sbpcd.h

/* [previous][next][first][last][top][bottom][index][help] */

INCLUDED FROM


   1 /*
   2  * sbpcd.h   Specify interface address and interface type here.
   3  */
   4 
   5 /*
   6  * the definitions for the first controller can get overridden by
   7  * the kernel command line ("lilo boot option").
   8  * Examples:
   9  *                                 sbpcd=0x230,SoundBlaster
  10  *                             or
  11  *                                 sbpcd=0x300,LaserMate
  12  *                             or
  13  *                                 sbpcd=0x330,SPEA
  14  *
  15  * These strings are case sensitive !!!
  16  */
  17 
  18 /*
  19  * put your CDROM port base address into CDROM_PORT
  20  * and specify the type of your interface in SBPRO.
  21  *
  22  * SBPRO addresses typically are 0x0230 (=0x220+0x10), 0x0250, ...
  23  * LASERMATE (CI-101P, WDH-7001C) addresses typically are 0x0300, 0x0310, ...
  24  * SPEA addresses are 0x320, 0x330, 0x340, 0x350
  25  * there are some soundcards on the market with 0x0630, 0x0650, ...
  26  *
  27  * example: if your SBPRO audio address is 0x220, specify 0x230.
  28  *
  29  *
  30  * set SBPRO to 1 for "true" SoundBlaster card
  31  * set SBPRO to 0 for "poor" (no sound) interface cards
  32  *                and for "compatible" soundcards.
  33  * set SBPRO to 2 for the SPEA Media FX card
  34  *
  35  * most "compatible" sound boards like Galaxy need to set SBPRO to 0 !!!
  36  * if SBPRO gets set wrong, the drive will get found - but any
  37  * data access will give errors (audio access will work).
  38  * The OmniCD interface card from CreativeLabs needs SBPRO 1.
  39  *
  40  * mail to emoenke@gwdg.de if your "compatible" card needs SBPRO 1
  41  * (currently I do not know any "compatible" with SBPRO 1)
  42  * then I can include better information with the next release.
  43  */
  44 #if !(SBPCD_ISSUE-1) /* first (or if you have only one) interface board: */
  45 #define CDROM_PORT 0x0340
  46 #define SBPRO     0
  47 #endif
  48 
  49 /*
  50  * If you have a "compatible" soundcard of type "SBPRO 0" or "SBPRO 2",
  51  * enter your sound card's base address here if you want sbpcd to turn
  52  * the CD sound channels on.
  53  *
  54  * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels
  55  *          #define SOUND_BASE 0     leaves the soundcard untouched
  56  */
  57 #define SOUND_BASE 0x220
  58 
  59 /* ignore the rest if you have only one interface board & driver */
  60 
  61 #if !(SBPCD_ISSUE-2) /* second interface board: */
  62 #define CDROM_PORT 0x0370
  63 #define SBPRO     0
  64 #endif
  65 #if !(SBPCD_ISSUE-3) /* third interface board: */
  66 #define CDROM_PORT 0x0330
  67 #define SBPRO     0
  68 #endif
  69 #if !(SBPCD_ISSUE-4) /* fourth interface board: */
  70 #define CDROM_PORT 0x0230
  71 #define SBPRO     1
  72 #endif
  73 
  74 /*==========================================================================*/
  75 /*==========================================================================*/
  76 /*
  77  * nothing to change below here if you are not experimenting
  78  */
  79 #ifndef _LINUX_SBPCD_H
  80 
  81 #define _LINUX_SBPCD_H
  82 
  83 /*==========================================================================*/
  84 /*==========================================================================*/
  85 /*
  86  * DDI interface definitions
  87  * "invented" by Fred N. van Kempen..
  88  */
  89 #define DDIOCSDBG       0x9000
  90 #define DPRINTF(x)      sbpcd_dprintf x
  91 
  92 /*==========================================================================*/
  93 /*
  94  * Debug output levels
  95  */
  96 #define DBG_INF         1       /* necessary information */
  97 #define DBG_BSZ         2       /* BLOCK_SIZE trace */
  98 #define DBG_REA         3       /* "read" status trace */
  99 #define DBG_CHK         4       /* "media check" trace */
 100 #define DBG_TIM         5       /* datarate timer test */
 101 #define DBG_INI         6       /* initialization trace */
 102 #define DBG_TOC         7       /* tell TocEntry values */
 103 #define DBG_IOC         8       /* ioctl trace */
 104 #define DBG_STA         9       /* "ResponseStatus" trace */
 105 #define DBG_ERR         10      /* "xx_ReadError" trace */
 106 #define DBG_CMD         11      /* "cmd_out" trace */
 107 #define DBG_WRN         12      /* give explanation before auto-probing */
 108 #define DBG_MUL         13      /* multi session code test */
 109 #define DBG_ID          14      /* "drive_id !=0" test code */
 110 #define DBG_IOX         15      /* some special information */
 111 #define DBG_DID         16      /* drive ID test */
 112 #define DBG_RES         17      /* drive reset info */
 113 #define DBG_SPI         18      /* SpinUp test */
 114 #define DBG_IOS         19      /* ioctl trace: "subchannel" */
 115 #define DBG_IO2         20      /* ioctl trace: general */
 116 #define DBG_UPC         21      /* show UPC information */
 117 #define DBG_XA          22      /* XA mode debugging */
 118 #define DBG_LCK         23      /* door (un)lock info */
 119 #define DBG_SQ          24      /* dump SubQ frame */
 120 #define DBG_AUD         25      /* "read audio" debugging */
 121 #define DBG_SEQ         26      /* Sequoia interface configuration trace */
 122 #define DBG_LCS         27      /* Longshine LCS-7260 debugging trace */
 123 #define DBG_TEA         28      /* TEAC CD-55A debugging trace */
 124 #define DBG_CD2         29      /* MKE CD200 debugging trace */
 125 #define DBG_000         30      /* unnecessary information */
 126 
 127 /*==========================================================================*/
 128 /*==========================================================================*/
 129 
 130 /*
 131  * bits of flags_cmd_out:
 132  */
 133 #define f_respo3                0x100
 134 #define f_putcmd                0x80
 135 #define f_respo2                0x40
 136 #define f_lopsta                0x20
 137 #define f_getsta                0x10
 138 #define f_ResponseStatus        0x08
 139 #define f_obey_p_check          0x04
 140 #define f_bit1                  0x02
 141 #define f_wait_if_busy          0x01
 142 
 143 /*
 144  * diskstate_flags:
 145  */
 146 #define x80_bit                 0x80
 147 #define upc_bit                 0x40
 148 #define volume_bit              0x20
 149 #define toc_bit                 0x10
 150 #define multisession_bit        0x08
 151 #define cd_size_bit             0x04
 152 #define subq_bit                0x02
 153 #define frame_size_bit          0x01
 154 
 155 /*
 156  * disk states (bits of diskstate_flags):
 157  */
 158 #define upc_valid (DriveStruct[d].diskstate_flags&upc_bit)
 159 #define volume_valid (DriveStruct[d].diskstate_flags&volume_bit)
 160 #define toc_valid (DriveStruct[d].diskstate_flags&toc_bit)
 161 #define cd_size_valid (DriveStruct[d].diskstate_flags&cd_size_bit)
 162 #define subq_valid (DriveStruct[d].diskstate_flags&subq_bit)
 163 #define frame_size_valid (DriveStruct[d].diskstate_flags&frame_size_bit)
 164 
 165 /*
 166  * bits of the status_byte (result of xx_ReadStatus):
 167  */
 168 #define p_door_closed 0x80
 169 #define p_caddy_in 0x40
 170 #define p_spinning 0x20
 171 #define p_check 0x10
 172 #define p_busy_new 0x08
 173 #define p_door_locked 0x04
 174 #define p_bit_1 0x02 /* hopefully unused now */
 175 #define p_lcs_door_locked 0x02 /* new use of old bit */
 176 #define p_disk_ok 0x01
 177 #define p_lcs_door_closed 0x01 /* new use of old bit */
 178 /*
 179  * "old" drives status result bits:
 180  */
 181 #define p_caddin_old 0x40
 182 #define p_success_old 0x08
 183 #define p_busy_old 0x04
 184 
 185 /*
 186  * "generation specific" defs of the status_byte:
 187  */
 188 #define p0_door_closed  0x80
 189 #define p0_caddy_in     0x40
 190 #define p0_spinning     0x20
 191 #define p0_check        0x10
 192 #define p0_success      0x08 /* unused */
 193 #define p0_busy         0x04
 194 #define p0_bit_1        0x02 /* unused */
 195 #define p0_disk_ok      0x01
 196 
 197 #define p1_door_closed  0x80
 198 #define p1_disk_in      0x40
 199 #define p1_spinning     0x20
 200 #define p1_check        0x10
 201 #define p1_busy         0x08
 202 #define p1_door_locked  0x04
 203 #define p1_bit_1        0x02 /* unused */
 204 #define p1_disk_ok      0x01
 205 
 206 #define p2_disk_ok      0x80
 207 #define p2_door_locked  0x40
 208 #define p2_spinning     0x20
 209 #define p2_busy2        0x10
 210 #define p2_busy1        0x08
 211 #define p2_door_closed  0x04
 212 #define p2_disk_in      0x02
 213 #define p2_check        0x01
 214 
 215 /*
 216  * used drive states:
 217  */
 218 #define st_door_closed (DriveStruct[d].status_byte&p_door_closed)
 219 #define st_caddy_in (DriveStruct[d].status_byte&p_caddy_in)
 220 #define st_spinning (DriveStruct[d].status_byte&p_spinning)
 221 #define st_check (DriveStruct[d].status_byte&p_check)
 222 #define st_busy (DriveStruct[d].status_byte&p_busy_new)
 223 #define st_door_locked (DriveStruct[d].status_byte&p_door_locked)
 224 #define st_diskok (DriveStruct[d].status_byte&p_disk_ok)
 225 
 226 /*
 227  * bits of the CDi_status register:
 228  */
 229 #define s_not_result_ready 0x04  /* 0: "result ready" */
 230 #define s_not_data_ready 0x02    /* 0: "data ready"   */
 231 #define s_attention 0x01         /* 1: "attention required" */
 232 /*
 233  * usable as:
 234  */
 235 #define DRV_ATTN               ((inb(CDi_status)&s_attention)!=0)
 236 #define DATA_READY             ((inb(CDi_status)&s_not_data_ready)==0)
 237 #define RESULT_READY           ((inb(CDi_status)&s_not_result_ready)==0)
 238 
 239 /*
 240  * drive types (firmware versions):
 241  */
 242 #define drv_fam0 0x08   /* CR-52x family */
 243 #define drv_199 (drv_fam0+0x01)    /* <200 */
 244 #define drv_200 (drv_fam0+0x02)    /* <201 */
 245 #define drv_201 (drv_fam0+0x03)    /* <210 */
 246 #define drv_210 (drv_fam0+0x04)    /* <211 */
 247 #define drv_211 (drv_fam0+0x05)    /* <300 */
 248 #define drv_300 (drv_fam0+0x06)    /* >=300 */
 249 
 250 #define drv_famL 0x10    /* Longshine family */
 251 #define drv_260 (drv_famL+0x01)    /* LCS-7260 */
 252 
 253 #define drv_fam1 0x20    /* CR-56x family */
 254 #define drv_099 (drv_fam1+0x01)    /* <100 */
 255 #define drv_100 (drv_fam1+0x02)    /* >=100 */
 256 
 257 #define drv_famT 0x40    /* TEAC CD-55A */
 258 #define drv_fam2 0x80    /* CD200 family */
 259 
 260 #define fam0_drive (DriveStruct[d].drv_type&drv_fam0)
 261 #define famL_drive (DriveStruct[d].drv_type&drv_famL)
 262 #define fam1_drive (DriveStruct[d].drv_type&drv_fam1)
 263 #define famT_drive (DriveStruct[d].drv_type&drv_famT)
 264 #define fam2_drive (DriveStruct[d].drv_type&drv_fam2)
 265 #define fam0L_drive (DriveStruct[d].drv_type&(drv_fam0|drv_famL))
 266 #define fam1L_drive (DriveStruct[d].drv_type&(drv_fam1|drv_famL))
 267 #define fam01_drive (DriveStruct[d].drv_type&(drv_fam0|drv_fam1))
 268 
 269 /*
 270  * audio states:
 271  */
 272 #define audio_playing 2
 273 #define audio_pausing 1
 274 
 275 /*
 276  * drv_pattern, drv_options:
 277  */
 278 #define speed_auto      0x80
 279 #define speed_300       0x40
 280 #define speed_150       0x20
 281 #define audio_mono      0x04
 282 
 283 /*
 284  * values of cmd_type (0 else):
 285  */
 286 #define READ_M1  0x01 /* "data mode 1": 2048 bytes per frame */
 287 #define READ_M2  0x02 /* "data mode 2": 12+2048+280 bytes per frame */
 288 #define READ_SC  0x04 /* "subchannel info": 96 bytes per frame */
 289 #define READ_AU  0x08 /* "audio frame": 2352 bytes per frame */
 290 
 291 /*
 292  * sense_byte:
 293  *
 294  *          values: 00
 295  *                  01
 296  *                  81
 297  *                  82 "raw audio" mode
 298  *                  xx from infobuf[0] after 85 00 00 00 00 00 00
 299  */
 300 
 301 /* audio status (bin) */
 302 #define aud_00 0x00 /* Audio status byte not supported or not valid */
 303 #define audx11 0x0b /* Audio play operation in progress             */
 304 #define audx12 0x0c /* Audio play operation paused                  */
 305 #define audx13 0x0d /* Audio play operation successfully completed  */
 306 #define audx14 0x0e /* Audio play operation stopped due to error    */
 307 #define audx15 0x0f /* No current audio status to return            */
 308 
 309 /* audio status (bcd) */
 310 #define aud_11 0x11 /* Audio play operation in progress             */
 311 #define aud_12 0x12 /* Audio play operation paused                  */
 312 #define aud_13 0x13 /* Audio play operation successfully completed  */
 313 #define aud_14 0x14 /* Audio play operation stopped due to error    */
 314 #define aud_15 0x15 /* No current audio status to return            */
 315 
 316 
 317 /*
 318  * highest allowed drive number (MINOR+1)
 319  */
 320 #define NR_SBPCD 4
 321 
 322 /*
 323  * we try to never disable interrupts - seems to work
 324  */
 325 #define SBPCD_DIS_IRQ 0
 326 
 327 /*
 328  * "write byte to port"
 329  */
 330 #define OUT(x,y) outb(y,x)
 331 
 332 /*
 333  * use "REP INSB" for strobing the data in:
 334  */
 335 #define READ_DATA(port, buf, nr) insb(port, buf, nr)
 336 
 337 /*==========================================================================*/
 338 
 339 #define MIXER_CD_Volume 0x28 /* internal SB Pro register address */
 340 
 341 /*==========================================================================*/
 342 /*
 343  * Creative Labs Programmers did this:
 344  */
 345 #define MAX_TRACKS      120 /* why more than 99? */
 346 
 347 /*==========================================================================*/
 348 /*
 349  * To make conversions easier (machine dependent!)
 350  */
 351 typedef union _msf
 352 {
 353   u_int n;
 354   u_char c[4];
 355 }
 356 MSF;
 357 
 358 typedef union _blk
 359 {
 360   u_int n;
 361   u_char c[4];
 362 }
 363 BLK;
 364 
 365 /*==========================================================================*/
 366 
 367 /*============================================================================
 368 ==============================================================================
 369 
 370 COMMAND SET of "old" drives like CR-521, CR-522
 371                (the CR-562 family is different):
 372 
 373 No.     Command                        Code
 374 --------------------------------------------
 375 
 376 Drive Commands:
 377  1      Seek                            01      
 378  2      Read Data                       02
 379  3      Read XA-Data                    03
 380  4      Read Header                     04
 381  5      Spin Up                         05
 382  6      Spin Down                       06
 383  7      Diagnostic                      07
 384  8      Read UPC                        08
 385  9      Read ISRC                       09
 386 10      Play Audio                      0A
 387 11      Play Audio MSF                  0B
 388 12      Play Audio Track/Index          0C
 389 
 390 Status Commands:
 391 13      Read Status                     81      
 392 14      Read Error                      82
 393 15      Read Drive Version              83
 394 16      Mode Select                     84
 395 17      Mode Sense                      85
 396 18      Set XA Parameter                86
 397 19      Read XA Parameter               87
 398 20      Read Capacity                   88
 399 21      Read SUB_Q                      89
 400 22      Read Disc Code                  8A
 401 23      Read Disc Information           8B
 402 24      Read TOC                        8C
 403 25      Pause/Resume                    8D
 404 26      Read Packet                     8E
 405 27      Read Path Check                 00
 406  
 407  
 408 all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first
 409 
 410 mnemo     7-byte command        #bytes response (r0...rn)
 411 ________ ____________________  ____ 
 412 
 413 Read Status:
 414 status:  81.                    (1)  one-byte command, gives the main
 415                                                           status byte
 416 Read Error:
 417 check1:  82 00 00 00 00 00 00.  (6)  r1: audio status
 418 
 419 Read Packet:
 420 check2:  8e xx 00 00 00 00 00. (xx)  gets xx bytes response, relating
 421                                         to commands 01 04 05 07 08 09
 422 
 423 Play Audio:
 424 play:    0a ll-bb-aa nn-nn-nn.  (0)  play audio, ll-bb-aa: starting block (lba),
 425                                                  nn-nn-nn: #blocks
 426 Play Audio MSF:
 427          0b mm-ss-ff mm-ss-ff   (0)  play audio from/to
 428 
 429 Play Audio Track/Index:
 430          0c ...
 431 
 432 Pause/Resume:
 433 pause:   8d pr 00 00 00 00 00.  (0)  pause (pr=00) 
 434                                      resume (pr=80) audio playing
 435 
 436 Mode Select:
 437          84 00 nn-nn ??-?? 00   (0)  nn-nn: 2048 or 2340
 438                                      possibly defines transfer size
 439 
 440 set_vol: 84 83 00 00 sw le 00.  (0)  sw(itch): lrxxxxxx (off=1)
 441                                      le(vel): min=0, max=FF, else half
 442                                      (firmware 2.11)
 443 
 444 Mode Sense:
 445 get_vol: 85 03 00 00 00 00 00.  (2)  tell current audio volume setting
 446 
 447 Read Disc Information:
 448 tocdesc: 8b 00 00 00 00 00 00.  (6)  read the toc descriptor ("msf-bin"-format)
 449 
 450 Read TOC:
 451 tocent:  8c fl nn 00 00 00 00.  (8)  read toc entry #nn
 452                                        (fl=0:"lba"-, =2:"msf-bin"-format)
 453 
 454 Read Capacity:
 455 capacit: 88 00 00 00 00 00 00.  (5)  "read CD-ROM capacity"
 456 
 457 
 458 Read Path Check:
 459 ping:    00 00 00 00 00 00 00.  (2)  r0=AA, r1=55
 460                                      ("ping" if the drive is connected)
 461 
 462 Read Drive Version:
 463 ident:   83 00 00 00 00 00 00. (12)  gives "MATSHITAn.nn" 
 464                                      (n.nn = 2.01, 2.11., 3.00, ...)
 465 
 466 Seek:
 467 seek:    01 00 ll-bb-aa 00 00.  (0)  
 468 seek:    01 02 mm-ss-ff 00 00.  (0)  
 469 
 470 Read Data:
 471 read:    02 xx-xx-xx nn-nn fl. (??)  read nn-nn blocks of 2048 bytes,
 472                                      starting at block xx-xx-xx  
 473                                      fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
 474 
 475 Read XA-Data:
 476 read:    03 xx-xx-xx nn-nn fl. (??)  read nn-nn blocks of 2340 bytes, 
 477                                      starting at block xx-xx-xx
 478                                      fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx
 479 
 480 Read SUB_Q:
 481          89 fl 00 00 00 00 00. (13)  r0: audio status, r4-r7: lba/msf, 
 482                                        fl=0: "lba", fl=2: "msf"
 483 
 484 Read Disc Code:
 485          8a 00 00 00 00 00 00. (14)  possibly extended "check condition"-info
 486 
 487 Read Header:
 488          04 00 ll-bb-aa 00 00.  (0)   4 bytes response with "check2"
 489          04 02 mm-ss-ff 00 00.  (0)   4 bytes response with "check2"
 490 
 491 Spin Up:
 492          05 00 ll-bb-aa 00 00.  (0)  possibly implies a "seek"
 493 
 494 Spin Down:
 495          06 ...
 496 
 497 Diagnostic:
 498          07 00 ll-bb-aa 00 00.  (2)   2 bytes response with "check2"
 499          07 02 mm-ss-ff 00 00.  (2)   2 bytes response with "check2"
 500 
 501 Read UPC:
 502          08 00 ll-bb-aa 00 00. (16)  
 503          08 02 mm-ss-ff 00 00. (16)  
 504 
 505 Read ISRC:
 506          09 00 ll-bb-aa 00 00. (15)  15 bytes response with "check2"
 507          09 02 mm-ss-ff 00 00. (15)  15 bytes response with "check2"
 508 
 509 Set XA Parameter:
 510          86 ...
 511 
 512 Read XA Parameter:
 513          87 ...
 514 
 515 ==============================================================================
 516 ============================================================================*/
 517 
 518 /*
 519  * commands
 520  *
 521  * CR-52x:      CMD0_
 522  * CR-56x:      CMD1_
 523  * CD200:       CMD2_
 524  * LCS-7260:    CMDL_
 525  * TEAC CD-55A: CMDT_
 526  */
 527 #define CMD1_RESET      0x0a
 528 #define CMD2_RESET      0x01
 529 #define CMDL_RESET      0x0a
 530 #define CMDT_RESET      0xc0
 531 #define CMD1_LOCK_CTL   0x0c
 532 #define CMD2_LOCK_CTL   0x1e
 533 #define CMDL_LOCK_CTL   0x0e
 534 #define CMDT_LOCK_CTL   0x1e
 535 #define CMD1_TRAY_CTL   0x07
 536 #define CMD2_TRAY_CTL   0x1b
 537 #define CMDL_TRAY_CTL   0x0d
 538 #define CMDT_TRAY_CTL   0x1b
 539 #define CMD1_MULTISESS  0x8d
 540 #define CMD2_MULTISESS  0x43
 541 #define CMDL_MULTISESS  0x8c
 542 #define CMD1_SUBCHANINF 0x11
 543 #define CMD2_SUBCHANINF 0x
 544 #define CMD2_x02        0x02
 545 #define CMD1_x08        0x08
 546 #define CMD2_x08        0x08
 547 #define CMDT_x08        0x08
 548 #define CMD2_xD4        0xd4
 549 #define CMD2_xDA        0xda
 550 
 551 #define CMD0_PATH_CHECK 0x00
 552 #define CMD1_PATH_CHECK 0x00
 553 #define CMD2_PATH_CHECK 0x
 554 #define CMDL_PATH_CHECK 0x00
 555 #define CMD0_SEEK       0x01
 556 #define CMD1_SEEK       0x01
 557 #define CMD2_SEEK       0x2b
 558 #define CMDL_SEEK       0x01
 559 #define CMDT_SEEK       0x2b
 560 #define CMD0_READ       0x02
 561 #define CMD1_READ       0x10
 562 #define CMD2_READ       0x28
 563 #define CMDL_READ       0x02
 564 #define CMDT_READ       0x28
 565 #define CMD0_READ_XA    0x03
 566 #define CMDL_READ_XA    0x03 /* really ?? */
 567 #define CMD0_READ_HEAD  0x04
 568 #define CMD0_SPINUP     0x05
 569 #define CMD1_SPINUP     0x02
 570 #define CMD2_SPINUP     CMD2_TRAY_CTL
 571 #define CMDL_SPINUP     0x05
 572 #define CMD0_SPINDOWN   0x06 /* really??? */
 573 #define CMD1_SPINDOWN   0x06
 574 #define CMD2_SPINDOWN   CMD2_TRAY_CTL
 575 #define CMDL_SPINDOWN   0x0d
 576 #define CMD0_DIAG       0x07
 577 #define CMD0_READ_UPC   0x08
 578 #define CMD1_READ_UPC   0x88
 579 #define CMD2_READ_UPC   0x
 580 #define CMDL_READ_UPC   0x08
 581 #define CMD0_READ_ISRC  0x09
 582 #define CMD0_PLAY       0x0a
 583 #define CMD1_PLAY       0x
 584 #define CMD2_PLAY       0x
 585 #define CMDL_PLAY       0x0a
 586 #define CMD0_PLAY_MSF   0x0b
 587 #define CMD1_PLAY_MSF   0x0e
 588 #define CMD2_PLAY_MSF   0x47
 589 #define CMDL_PLAY_MSF   0x
 590 #define CMDT_PLAY_MSF   0x47
 591 #define CMD0_PLAY_TI    0x0c
 592 #define CMD0_STATUS     0x81
 593 #define CMD1_STATUS     0x05
 594 #define CMD2_STATUS     0x00
 595 #define CMDL_STATUS     0x81
 596 #define CMDT_STATUS     0x00
 597 #define CMD0_READ_ERR   0x82
 598 #define CMD1_READ_ERR   0x82
 599 #define CMD2_READ_ERR   0x03
 600 #define CMDL_READ_ERR   0x82
 601 #define CMDT_READ_ERR   0x03 /* get audio status */
 602 #define CMD0_READ_VER   0x83
 603 #define CMD1_READ_VER   0x83
 604 #define CMD2_READ_VER   0x12
 605 #define CMDT_READ_VER   0x12 /* ??? (unused) */
 606 #define CMDL_READ_VER   0x83
 607 #define CMD0_SETMODE    0x84
 608 #define CMD1_SETMODE    0x09
 609 #define CMD2_SETMODE    0x55
 610 #define CMDL_SETMODE    0x84
 611 #define CMDT_SETMODE    0x55
 612 #define CMD0_GETMODE    0x85
 613 #define CMD1_GETMODE    0x84
 614 #define CMD2_GETMODE    0x5a
 615 #define CMDL_GETMODE    0x85
 616 #define CMDT_GETMODE    0x5a
 617 #define CMD0_SET_XA     0x86
 618 #define CMD0_GET_XA     0x87
 619 #define CMD0_CAPACITY   0x88
 620 #define CMD1_CAPACITY   0x85
 621 #define CMD2_CAPACITY   0x25
 622 #define CMDL_CAPACITY   0x88
 623 #define CMD0_READSUBQ   0x89
 624 #define CMD1_READSUBQ   0x87
 625 #define CMD2_READSUBQ   0x42
 626 #define CMDL_READSUBQ   0x89
 627 #define CMDT_READSUBQ   0x42
 628 #define CMD0_DISKCODE   0x8a
 629 #define CMD0_DISKINFO   0x8b
 630 #define CMD1_DISKINFO   0x8b
 631 #define CMD2_DISKINFO   0x
 632 #define CMDL_DISKINFO   0x8b
 633 #define CMDT_DISKINFO   0x43
 634 #define CMD0_READTOC    0x8c
 635 #define CMD1_READTOC    0x8c
 636 #define CMD2_READTOC    0x
 637 #define CMDL_READTOC    0x8c
 638 #define CMD0_PAU_RES    0x8d
 639 #define CMD1_PAU_RES    0x0d
 640 #define CMD2_PAU_RES    0x4b
 641 #define CMDL_PAU_RES    0x8d
 642 #define CMDT_PAU_RES    0x4b
 643 #define CMD0_PACKET     0x8e
 644 #define CMD1_PACKET     0x8e
 645 #define CMD2_PACKET     0x
 646 #define CMDL_PACKET     0x8e
 647 
 648 /*==========================================================================*/
 649 /*==========================================================================*/
 650 #endif _LINUX_SBPCD_H

/* [previous][next][first][last][top][bottom][index][help] */