![[bottom]](../icons/bottom.png){kind=icon}
![[previous]](../icons/n_left.png){kind=icon}
![[next]](../icons/n_right.png){kind=icon}
![[first]](../icons/n_first.png){kind=icon}
![[last]](../icons/n_last.png){kind=icon}
![[top]](../icons/n_top.png){kind=icon}
![[index]](../icons/index.png){kind=icon}
![[help]](../icons/help.png){kind=icon}
*/
1 #ifndef _AHA1740_H
2
3 /* $Id$
4 *
5 * Header file for the adaptec 1740 driver for Linux
6 *
7 * With minor revisions 3/31/93
8 * Written and (C) 1992,1993 Brad McLean. See aha1740.c
9 * for more info
10 *
11 */
12
13 #include <linux/types.h>
14
15 /* Eisa Enhanced mode operation - slot locating and addressing */
16 #define MINEISA 1 /* I don't have an EISA Spec to know these ranges, so I */
17 #define MAXEISA 8 /* Just took my machine's specifications. Adjust to fit.*/
18 /* I just saw an ad, and bumped this from 6 to 8 */
19 #define SLOTBASE(x) ((x << 12)+ 0xc80 )
20 #define BASE (base)
21
22 /* EISA configuration registers & values */
23 #define HID0 (base + 0x0)
24 #define HID1 (base + 0x1)
25 #define HID2 (base + 0x2)
26 #define HID3 (base + 0x3)
27 #define EBCNTRL (base + 0x4)
28 #define PORTADR (base + 0x40)
29 #define BIOSADR (base + 0x41)
30 #define INTDEF (base + 0x42)
31 #define SCSIDEF (base + 0x43)
32 #define BUSDEF (base + 0x44)
33 #define RESV0 (base + 0x45)
34 #define RESV1 (base + 0x46)
35 #define RESV2 (base + 0x47)
36
37 #define HID_MFG "ADP"
38 #define HID_PRD 0
39 #define HID_REV 2
40 #define EBCNTRL_VALUE 1
41 #define PORTADDR_ENH 0x80
42 /* READ */
43 #define G2INTST (BASE + 0x56)
44 #define G2STAT (BASE + 0x57)
45 #define MBOXIN0 (BASE + 0x58)
46 #define MBOXIN1 (BASE + 0x59)
47 #define MBOXIN2 (BASE + 0x5a)
48 #define MBOXIN3 (BASE + 0x5b)
49 #define G2STAT2 (BASE + 0x5c)
50
51 #define G2INTST_MASK 0xf0 /* isolate the status */
52 #define G2INTST_CCBGOOD 0x10 /* CCB Completed */
53 #define G2INTST_CCBRETRY 0x50 /* CCB Completed with a retry */
54 #define G2INTST_HARDFAIL 0x70 /* Adapter Hardware Failure */
55 #define G2INTST_CMDGOOD 0xa0 /* Immediate command success */
56 #define G2INTST_CCBERROR 0xc0 /* CCB Completed with error */
57 #define G2INTST_ASNEVENT 0xd0 /* Asynchronous Event Notification */
58 #define G2INTST_CMDERROR 0xe0 /* Immediate command error */
59
60 #define G2STAT_MBXOUT 4 /* Mailbox Out Empty Bit */
61 #define G2STAT_INTPEND 2 /* Interrupt Pending Bit */
62 #define G2STAT_BUSY 1 /* Busy Bit (attention pending) */
63
64 #define G2STAT2_READY 0 /* Host Ready Bit */
65
66 /* WRITE (and ReadBack) */
67 #define MBOXOUT0 (BASE + 0x50)
68 #define MBOXOUT1 (BASE + 0x51)
69 #define MBOXOUT2 (BASE + 0x52)
70 #define MBOXOUT3 (BASE + 0x53)
71 #define ATTN (BASE + 0x54)
72 #define G2CNTRL (BASE + 0x55)
73
74 #define ATTN_IMMED 0x10 /* Immediate Command */
75 #define ATTN_START 0x40 /* Start CCB */
76 #define ATTN_ABORT 0x50 /* Abort CCB */
77
78 #define G2CNTRL_HRST 0x80 /* Hard Reset */
79 #define G2CNTRL_IRST 0x40 /* Clear EISA Interrupt */
80 #define G2CNTRL_HRDY 0x20 /* Sets HOST ready */
81
82 /* This is used with scatter-gather */
83 struct aha1740_chain {
84 ulong dataptr; /* Location of data */
85 ulong datalen; /* Size of this part of chain */
86 };
87
88 /* These belong in scsi.h */
89 #define any2scsi(up, p) \
90 (up)[0] = (((unsigned long)(p)) >> 16) ; \
91 (up)[1] = (((unsigned long)(p)) >> 8); \
92 (up)[2] = ((unsigned long)(p));
93
94 #define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
95
96 #define xany2scsi(up, p) \
97 (up)[0] = ((long)(p)) >> 24; \
98 (up)[1] = ((long)(p)) >> 16; \
99 (up)[2] = ((long)(p)) >> 8; \
100 (up)[3] = ((long)(p));
101
102 #define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
103 + (((long)(up)[2]) << 8) + ((long)(up)[3]) )
104
105 #define MAX_CDB 12
106 #define MAX_SENSE 14
107 #define MAX_STATUS 32
108
109 struct ecb { /* Enhanced Control Block 6.1 */
110 ushort cmdw; /* Command Word */
111 /* Flag Word 1 */
112 ushort cne:1, /* Control Block Chaining */
113 :6, di:1, /* Disable Interrupt */
114 :2, ses:1, /* Suppress Underrun error */
115 :1, sg:1, /* Scatter/Gather */
116 :1, dsb:1, /* Disable Status Block */
117 ars:1; /* Automatic Request Sense */
118 /* Flag Word 2 */
119 ushort lun:3, /* Logical Unit */
120 tag:1, /* Tagged Queuing */
121 tt:2, /* Tag Type */
122 nd:1, /* No Disconnect */
123 :1, dat:1, /* Data transfer - check direction */
124 dir:1, /* Direction of transfer 1 = datain */
125 st:1, /* Suppress Transfer */
126 chk:1, /* Calculate Checksum */
127 :2, rec:1, :1; /* Error Recovery */
128 ushort nil0; /* nothing */
129 ulong dataptr; /* Data or Scatter List ptr */
130 ulong datalen; /* Data or Scatter List len */
131 ulong statusptr; /* Status Block ptr */
132 ulong linkptr; /* Chain Address */
133 ulong nil1; /* nothing */
134 ulong senseptr; /* Sense Info Pointer */
135 unchar senselen; /* Sense Length */
136 unchar cdblen; /* CDB Length */
137 ushort datacheck; /* Data checksum */
138 unchar cdb[MAX_CDB]; /* CDB area */
139 /* Hardware defined portion ends here, rest is driver defined */
140 unchar sense[MAX_SENSE]; /* Sense area */
141 unchar status[MAX_STATUS]; /* Status area */
142 Scsi_Cmnd *SCpnt; /* Link to the SCSI Command Block */
143 void (*done)(Scsi_Cmnd *); /* Completion Function */
144 };
145
146 #define AHA1740CMD_NOP 0x00 /* No OP */
147 #define AHA1740CMD_INIT 0x01 /* Initiator SCSI Command */
148 #define AHA1740CMD_DIAG 0x05 /* Run Diagnostic Command */
149 #define AHA1740CMD_SCSI 0x06 /* Initialize SCSI */
150 #define AHA1740CMD_SENSE 0x08 /* Read Sense Information */
151 #define AHA1740CMD_DOWN 0x09 /* Download Firmware (yeah, I bet!) */
152 #define AHA1740CMD_RINQ 0x0a /* Read Host Adapter Inquiry Data */
153 #define AHA1740CMD_TARG 0x10 /* Target SCSI Command */
154
155 int aha1740_detect(Scsi_Host_Template *);
156 int aha1740_command(Scsi_Cmnd *);
157 int aha1740_queuecommand(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
158 int aha1740_abort(Scsi_Cmnd *);
159 int aha1740_reset(Scsi_Cmnd *);
160 int aha1740_biosparam(Disk *, int, int*);
161
162 #define AHA1740_ECBS 32
163 #define AHA1740_SCATTER 16
164
165 #ifndef NULL
166 #define NULL 0
167 #endif
168
169 #define AHA1740 {NULL, NULL, \
170 "Adaptec 174x (EISA)", \
171 aha1740_detect, \
172 NULL, \
173 NULL, \
174 aha1740_command, \
175 aha1740_queuecommand, \
176 aha1740_abort, \
177 aha1740_reset, \
178 NULL, \
179 aha1740_biosparam, \
180 AHA1740_ECBS, \
181 7, \
182 AHA1740_SCATTER, \
183 1, \
184 0, \
185 0, \
186 ENABLE_CLUSTERING}
187
188 #endif
189
![[top]](../icons/top.png){kind=icon}
![[bottom]](../icons/n_bottom.png){kind=icon}
*/