tag | line | file | source code |
command | 422 | drivers/block/xd.c | static u_char *xd_build (u_char *cmdblk,u_char command,u_char drive,u_char head,u_short cylinder,u_char sector,u_char count,u_char control) |
command | 424 | drivers/block/xd.c | cmdblk[0] = command; |
command | 446 | drivers/block/xd.c | static u_int xd_command (u_char *command,u_char mode,u_char *indata,u_char *outdata,u_char *sense,u_long timeout) |
command | 451 | drivers/block/xd.c | printk("xd_command: command = 0x%X, mode = 0x%X, indata = 0x%X, outdata = 0x%X, sense = 0x%X\n",command,mode,indata,outdata,sense); |
command | 484 | drivers/block/xd.c | outb(command ? *command++ : 0,XD_DATA); |
command | 689 | drivers/block/xd.c | void xd_setup (char *command,int *integers) |
command | 702 | drivers/block/xd.c | static void xd_setparam (u_char command,u_char drive,u_char heads,u_short cylinders,u_short rwrite,u_short wprecomp,u_char ecc) |
command | 706 | drivers/block/xd.c | xd_build(cmdblk,command,drive,0,0,0,0,0); |
command | 73 | drivers/char/lp.c | unsigned char command; |
command | 75 | drivers/char/lp.c | command = LP_PSELECP | LP_PINITP; |
command | 81 | drivers/char/lp.c | outb_p(command, LP_C(minor)); |
command | 312 | drivers/net/3c505.c | OUTB(pcb->command, (adapter->io_addr)+PORT_COMMAND); |
command | 397 | drivers/net/3c505.c | pcb->command = INB(adapter->io_addr+PORT_COMMAND); |
command | 525 | drivers/net/3c505.c | tx_pcb->command = CMD_RECEIVE_PACKET; |
command | 720 | drivers/net/3c505.c | switch (adapter->irx_pcb.command) { |
command | 826 | drivers/net/3c505.c | printk("%s: unknown PCB received - %2.2x\n", dev->name, adapter->irx_pcb.command); |
command | 912 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_CONFIGURE_ADAPTER_MEMORY; |
command | 937 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_CONFIGURE_82586; |
command | 989 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_TRANSMIT_PACKET; |
command | 1141 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_NETWORK_STATISTICS; |
command | 1233 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_LOAD_MULTICAST_LIST; |
command | 1260 | drivers/net/3c505.c | adapter->tx_pcb.command = CMD_CONFIGURE_82586; |
command | 1487 | drivers/net/3c505.c | adapter.tx_pcb.command = CMD_STATION_ADDRESS; |
command | 1491 | drivers/net/3c505.c | (adapter.rx_pcb.command != CMD_ADDRESS_RESPONSE) || |
command | 92 | drivers/net/3c505dta.h | byte command; |
command | 93 | drivers/net/apricot.c | unsigned short command; |
command | 128 | drivers/net/apricot.c | unsigned short command; |
command | 288 | drivers/net/apricot.c | dev->name, lp->scb.status, lp->scb.command); |
command | 292 | drivers/net/apricot.c | lp->scb.command = 0; |
command | 295 | drivers/net/apricot.c | lp->set_conf.command = CmdConfigure; |
command | 299 | drivers/net/apricot.c | lp->set_add.command = CmdSASetup; |
command | 302 | drivers/net/apricot.c | lp->tdr.command = CmdTDR; |
command | 306 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
command | 310 | drivers/net/apricot.c | dev->name, lp->scb.status, lp->scb.command); |
command | 314 | drivers/net/apricot.c | lp->scb.command = RX_START; |
command | 318 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
command | 322 | drivers/net/apricot.c | lp->scb.status, lp->scb.command); |
command | 406 | drivers/net/apricot.c | switch ((ptr->command) & 0x7) |
command | 435 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
command | 439 | drivers/net/apricot.c | lp->scb.status, lp->scb.command); |
command | 453 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
command | 457 | drivers/net/apricot.c | lp->scb.status, lp->scb.command); |
command | 464 | drivers/net/apricot.c | lp->scb.command = CUC_ABORT|RX_ABORT; |
command | 470 | drivers/net/apricot.c | while ((lp->scb.status, lp->scb.command) || lp->scb.command) |
command | 474 | drivers/net/apricot.c | lp->scb.status, lp->scb.command); |
command | 497 | drivers/net/apricot.c | cmd->command |= (CMD_EOL|CMD_INTR); |
command | 507 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
command | 511 | drivers/net/apricot.c | lp->scb.status, lp->scb.command); |
command | 516 | drivers/net/apricot.c | lp->scb.command = CUC_START; |
command | 602 | drivers/net/apricot.c | lp->scb.command = CUC_START|RX_START; |
command | 646 | drivers/net/apricot.c | tx_cmd->cmd.command = CMD_FLEX|CmdTx; |
command | 747 | drivers/net/apricot.c | lp->scb.command = 0; |
command | 779 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
command | 782 | drivers/net/apricot.c | printk("%s: i596 interrupt, timeout status %4.4x command %4.4x.\n", dev->name, lp->scb.status, lp->scb.command); |
command | 808 | drivers/net/apricot.c | switch ((ptr->command) & 0x7) |
command | 875 | drivers/net/apricot.c | ptr->command &= 0x1fff; |
command | 901 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
command | 904 | drivers/net/apricot.c | printk("%s: i596 interrupt, timeout status %4.4x command %4.4x.\n", dev->name, lp->scb.status, lp->scb.command); |
command | 907 | drivers/net/apricot.c | lp->scb.command = ack_cmd; |
command | 934 | drivers/net/apricot.c | lp->scb.command = CUC_ABORT|RX_ABORT; |
command | 939 | drivers/net/apricot.c | while (lp->scb.status, lp->scb.command) |
command | 943 | drivers/net/apricot.c | dev->name, lp->scb.status, lp->scb.command); |
command | 989 | drivers/net/apricot.c | cmd->command = CmdMulticastList; |
command | 279 | drivers/net/i82586.h | ac_cfg_t action command. |
command | 815 | drivers/scsi/53c7,8xx.c | unsigned short vendor_id, device_id, command; |
command | 836 | drivers/scsi/53c7,8xx.c | &command)) || |
command | 866 | drivers/scsi/53c7,8xx.c | if (command & PCI_COMMAND_IO) { |
command | 875 | drivers/scsi/53c7,8xx.c | if (command & PCI_COMMAND_MEMORY) { |
command | 889 | drivers/scsi/53c7,8xx.c | if (!(command & PCI_COMMAND_MASTER)) { |
command | 101 | drivers/scsi/constants.c | void print_command (unsigned char *command) { |
command | 103 | drivers/scsi/constants.c | print_opcode(command[0]); |
command | 104 | drivers/scsi/constants.c | for ( i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i) |
command | 105 | drivers/scsi/constants.c | printk("%02x ", command[i]); |
command | 259 | drivers/scsi/eata_dma.c | inline uint eata_send_command(ulong addr, uint base, unchar command) |
command | 271 | drivers/scsi/eata_dma.c | outb(command, base + HA_WCOMMAND); |
command | 229 | drivers/scsi/eata_dma.h | unchar command; /* W, command code: [read|set] conf, send CP*/ |
command | 108 | drivers/scsi/hosts.h | int (* command)(Scsi_Cmnd *); |
command | 925 | drivers/scsi/scsi.c | printk("command() : routine at %08x\n", host->hostt->command); |
command | 927 | drivers/scsi/scsi.c | temp=host->hostt->command (SCpnt); |
command | 322 | drivers/scsi/ultrastor.c | int command) |
command | 340 | drivers/scsi/ultrastor.c | printk(fmt, command, &config->mscp[command], config->mscp_free); |
command | 183 | drivers/sound/dev_table.h | int (*command) (int dev, unsigned char *data); |
command | 2425 | drivers/sound/gus_wave.c | switch (rec->command) |
command | 1373 | drivers/sound/mpu401.c | unsigned char command = event[1]; |
command | 1377 | drivers/sound/mpu401.c | switch (command) |
command | 1459 | drivers/sound/mpu401.c | unsigned int command, unsigned int arg) |
command | 1463 | drivers/sound/mpu401.c | switch (command) |
command | 241 | drivers/sound/patmgr.c | mbox[dev]->command = event; |
command | 253 | include/linux/soundcard.h | int command; |
command | 820 | include/linux/soundcard.h | #define PM_LOAD_PATCH(dev, bank, pgm) (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \ |
command | 824 | include/linux/soundcard.h | #define PM_LOAD_PATCHES(dev, bank, pgm) (SEQ_DUMPBUF(), _pm_info.command = _PM_LOAD_PATCH, \ |
command | 108 | include/linux/xd.h | void xd_setup (char *command,int *integers); |
command | 123 | include/linux/xd.h | static u_char *xd_build (u_char *cmdblk,u_char command,u_char drive,u_char head,u_short cylinder,u_char sector,u_char count,u_char control); |
command | 125 | include/linux/xd.h | static u_int xd_command (u_char *command,u_char mode,u_char *indata,u_char *outdata,u_char *sense,u_long timeout); |
command | 136 | include/linux/xd.h | static void xd_setparam (u_char command,u_char drive,u_char heads,u_short cylinders,u_short rwrite,u_short wprecomp,u_char ecc); |