M

tag	line	file	source code
M	61	drivers/scsi/aic7770.c	unsigned char M[MEMORY][4];
M	166	drivers/scsi/aic7770.c	M[p->patch[i]][0] &= ~1;
M	167	drivers/scsi/aic7770.c	M[p->patch[i]][0] \|= ((p->value >> 8) & 1);
M	168	drivers/scsi/aic7770.c	M[p->patch[i]][1] = p->value & 0xff;
M	190	drivers/scsi/aic7770.c	M[i][3],
M	191	drivers/scsi/aic7770.c	M[i][2],
M	192	drivers/scsi/aic7770.c	M[i][1],
M	193	drivers/scsi/aic7770.c	M[i][0]);
M	465	drivers/scsi/aic7770.c	M[LC][0] = (I_op << 1) \| I_ret;
M	466	drivers/scsi/aic7770.c	M[LC][1] = I_dest;
M	467	drivers/scsi/aic7770.c	M[LC][2] = I_src;
M	468	drivers/scsi/aic7770.c	M[LC][3] = I_imm;
M	473	drivers/scsi/aic7770.c	M[LC][0] = (I_op << 1) \| ((I_addr >> 8) & 1);
M	474	drivers/scsi/aic7770.c	M[LC][1] = I_addr & 0xff;
M	475	drivers/scsi/aic7770.c	M[LC][2] = I_src;
M	476	drivers/scsi/aic7770.c	M[LC][3] = I_imm;
M	154	drivers/scsi/constants.c	{0x40,0x80,0xff,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Diagnostic failure on component (%x)"},
M	167	drivers/scsi/constants.c	{0x00,0x06,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"I/O process terminated"},
M	174	drivers/scsi/constants.c	{0x02,0x00,D\|W\|R\|O\|M,"No seek complete"},
M	178	drivers/scsi/constants.c	{0x04,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,
M	180	drivers/scsi/constants.c	{0x04,0x01,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,
M	182	drivers/scsi/constants.c	{0x04,0x02,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,
M	184	drivers/scsi/constants.c	{0x04,0x03,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,
M	187	drivers/scsi/constants.c	{0x05,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Logical unit does not respond to selection"},
M	188	drivers/scsi/constants.c	{0x06,0x00,D\|W\|R\|O\|M,"No reference position found"},
M	189	drivers/scsi/constants.c	{0x07,0x00,D\|T\|L\|W\|R\|S\|O\|M,"Multiple peripheral devices selected"},
M	190	drivers/scsi/constants.c	{0x08,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Logical unit communication failure"},
M	191	drivers/scsi/constants.c	{0x08,0x01,D\|T\|L\|W\|R\|S\|O\|M\|C,"Logical unit communication time-out"},
M	192	drivers/scsi/constants.c	{0x08,0x02,D\|T\|L\|W\|R\|S\|O\|M\|C,"Logical unit communication parity error"},
M	197	drivers/scsi/constants.c	{0x0A,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Error log overflow"},
M	222	drivers/scsi/constants.c	{0x15,0x00,D\|T\|L\|W\|R\|S\|O\|M,"Random positioning error"},
M	223	drivers/scsi/constants.c	{0x15,0x01,D\|T\|L\|W\|R\|S\|O\|M,"Mechanical positioning error"},
M	244	drivers/scsi/constants.c	{0x1A,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Parameter list length error"},
M	245	drivers/scsi/constants.c	{0x1B,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Synchronous data transfer error"},
M	251	drivers/scsi/constants.c	{0x20,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid command operation code"},
M	252	drivers/scsi/constants.c	{0x21,0x00,D\|T\|W\|R\|O\|M,"Logical block address out of range"},
M	253	drivers/scsi/constants.c	{0x21,0x01,M,"Invalid element address"},
M	255	drivers/scsi/constants.c	{0x24,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid field in cdb"},
M	256	drivers/scsi/constants.c	{0x25,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Logical unit not supported"},
M	257	drivers/scsi/constants.c	{0x26,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid field in parameter list"},
M	258	drivers/scsi/constants.c	{0x26,0x01,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Parameter not supported"},
M	259	drivers/scsi/constants.c	{0x26,0x02,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Parameter value invalid"},
M	260	drivers/scsi/constants.c	{0x26,0x03,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Threshold parameters not supported"},
M	262	drivers/scsi/constants.c	{0x28,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Not ready to ready transition (medium may have changed)"},
M	263	drivers/scsi/constants.c	{0x28,0x01,M,"Import or export element accessed"},
M	264	drivers/scsi/constants.c	{0x29,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Power on, reset, or bus device reset occurred"},
M	265	drivers/scsi/constants.c	{0x2A,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Parameters changed"},
M	266	drivers/scsi/constants.c	{0x2A,0x01,D\|T\|L\|W\|R\|S\|O\|M\|C,"Mode parameters changed"},
M	267	drivers/scsi/constants.c	{0x2A,0x02,D\|T\|L\|W\|R\|S\|O\|M\|C,"Log parameters changed"},
M	269	drivers/scsi/constants.c	{0x2C,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Command sequence error"},
M	273	drivers/scsi/constants.c	{0x2F,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Commands cleared by another initiator"},
M	274	drivers/scsi/constants.c	{0x30,0x00,D\|T\|W\|R\|O\|M,"Incompatible medium installed"},
M	284	drivers/scsi/constants.c	{0x37,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Rounded parameter"},
M	285	drivers/scsi/constants.c	{0x39,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Saving parameters not supported"},
M	286	drivers/scsi/constants.c	{0x3A,0x00,D\|T\|L\|W\|R\|S\|O\|M,"Medium not present"},
M	300	drivers/scsi/constants.c	{0x3B,0x0D,M,"Medium destination element full"},
M	301	drivers/scsi/constants.c	{0x3B,0x0E,M,"Medium source element empty"},
M	302	drivers/scsi/constants.c	{0x3D,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid bits in identify message"},
M	303	drivers/scsi/constants.c	{0x3E,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Logical unit has not self-configured yet"},
M	304	drivers/scsi/constants.c	{0x3F,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Target operating conditions have changed"},
M	305	drivers/scsi/constants.c	{0x3F,0x01,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Microcode has been changed"},
M	306	drivers/scsi/constants.c	{0x3F,0x02,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Changed operating definition"},
M	307	drivers/scsi/constants.c	{0x3F,0x03,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Inquiry data has changed"},
M	308	drivers/scsi/constants.c	{0x43,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Message error"},
M	309	drivers/scsi/constants.c	{0x44,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Internal target failure"},
M	310	drivers/scsi/constants.c	{0x45,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Select or reselect failure"},
M	311	drivers/scsi/constants.c	{0x46,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Unsuccessful soft reset"},
M	312	drivers/scsi/constants.c	{0x47,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Scsi parity error"},
M	313	drivers/scsi/constants.c	{0x48,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Initiator detected error message received"},
M	314	drivers/scsi/constants.c	{0x49,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid message error"},
M	315	drivers/scsi/constants.c	{0x4A,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Command phase error"},
M	316	drivers/scsi/constants.c	{0x4B,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Data phase error"},
M	317	drivers/scsi/constants.c	{0x4C,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Logical unit failed self-configuration"},
M	318	drivers/scsi/constants.c	{0x4E,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Overlapped commands attempted"},
M	324	drivers/scsi/constants.c	{0x53,0x00,D\|T\|L\|W\|R\|S\|O\|M,"Media load or eject failed"},
M	326	drivers/scsi/constants.c	{0x53,0x02,D\|T\|W\|R\|O\|M,"Medium removal prevented"},
M	332	drivers/scsi/constants.c	{0x5A,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M,"Operator request or state change input (unspecified)"},
M	333	drivers/scsi/constants.c	{0x5A,0x01,D\|T\|W\|R\|O\|M,"Operator medium removal request"},
M	336	drivers/scsi/constants.c	{0x5B,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M,"Log exception"},
M	337	drivers/scsi/constants.c	{0x5B,0x01,D\|T\|L\|P\|W\|R\|S\|O\|M,"Threshold condition met"},
M	338	drivers/scsi/constants.c	{0x5B,0x02,D\|T\|L\|P\|W\|R\|S\|O\|M,"Log counter at maximum"},
M	339	drivers/scsi/constants.c	{0x5B,0x03,D\|T\|L\|P\|W\|R\|S\|O\|M,"Log list codes exhausted"},
M	89	include/linux/major.h	#define SCSI_MAJOR(M) \
M	90	include/linux/major.h	((M) == SCSI_DISK_MAJOR \
M	91	include/linux/major.h	\|\| (M) == SCSI_TAPE_MAJOR \
M	92	include/linux/major.h	\|\| (M) == SCSI_CDROM_MAJOR \
M	93	include/linux/major.h	\|\| (M) == SCSI_GENERIC_MAJOR)