1 /* 2 * sbpcd.h Specify interface address and interface type here. 3 */ 4 5 /* 6 * Attention! This file contains user-serviceable parts! 7 * I recommend to make use of it... 8 * 9 * The definitions for the first controller can get overridden by 10 * the kernel command line ("lilo boot option"). 11 * Examples: 12 * sbpcd=0x230,SoundBlaster 13 * or 14 * sbpcd=0x300,LaserMate 15 * or 16 * sbpcd=0x330,SPEA 17 * 18 * If sbpcd gets used as a module, you can load it with 19 * insmod /usr/src/linux/modules/sbpcd.o sbpcd=0x230,1 20 * or 21 * insmod /usr/src/linux/modules/sbpcd.o sbpcd=0x300,0 22 * or 23 * insmod /usr/src/linux/modules/sbpcd.o sbpcd=0x330,2 24 * respective to override the configured address and type. 25 */ 26 27 /* 28 * define your CDROM port base address as CDROM_PORT 29 * and specify the type of your interface card as SBPRO. 30 * 31 * Read linux/drivers/block/README.sbpcd if you are in doubt about the 32 * type of your interface card (you should do that anyway). 33 * 34 * address: 35 * ======== 36 * SBPRO type addresses typically are 0x0230 (=0x220+0x10), 0x0250, ... 37 * LASERMATE type (CI-101P, WDH-7001C) addresses typically are 0x0300, ... 38 * SPEA addresses are from the LASERMATE type and range. 39 * There are some soundcards on the market with 0x0630, 0x0650, ...; their 40 * type is not obvious (both types are possible). 41 * 42 * example: if your SBPRO audio address is 0x220, specify 0x230 and SBPRO 1. 43 * if your soundcard has its CDROM port above 0x300, specify 44 * that address and try SBPRO 0 first. 45 * 46 * interface type: 47 * =============== 48 * set SBPRO to 1 for "true" SoundBlaster card 49 * set SBPRO to 0 for "compatible" soundcards and 50 * for "poor" (no sound) interface cards. 51 * set SBPRO to 2 for the SPEA Media FX card 52 * 53 * Almost all "compatible" sound boards need to set SBPRO to 0. 54 * If SBPRO is set wrong, the drives will get found - but any 55 * data access will give errors (audio access will work). 56 * The "OmniCD" no-sound interface card from CreativeLabs needs SBPRO 1. 57 * 58 * mail to emoenke@gwdg.de if you have a "compatible" sound card which 59 * in fact needs to set SBPRO to 1 (not any known at time). 60 * 61 * sound base: 62 * =========== 63 * The SOUND_BASE definition tells if we should try to turn the CD sound 64 * channels on. It will only be of use regarding soundcards with a SbPro 65 * compatible mixer. 66 * 67 * Example: #define SOUND_BASE 0x220 enables the sound card's CD channels 68 * #define SOUND_BASE 0 leaves the soundcard untouched 69 */ 70 #if !(SBPCD_ISSUE-1) /* first (or if you have only one) interface board: */ 71 #define CDROM_PORT 0x340 /* <-----------<< port address */ 72 #define SBPRO 0 /* <-----------<< interface type */ 73 #define SOUND_BASE 0x220 /* <-----------<< sound address of this card or 0 */ 74 #endif 75 #if !(SBPCD_ISSUE-2) /* ==================== second interface board: === */ 76 #define CDROM_PORT 0x344 /* <-----------<< port address */ 77 #define SBPRO 0 /* <-----------<< interface type */ 78 #define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */ 79 #endif 80 #if !(SBPCD_ISSUE-3) /* ===================== third interface board: === */ 81 #define CDROM_PORT 0x634 /* <-----------<< port address */ 82 #define SBPRO 1 /* <-----------<< interface type */ 83 #define SOUND_BASE 0x240 /* <-----------<< sound address of this card or 0 */ 84 #endif 85 #if !(SBPCD_ISSUE-4) /* ==================== fourth interface board: === */ 86 #define CDROM_PORT 0x634 /* <-----------<< port address */ 87 #define SBPRO 0 /* <-----------<< interface type */ 88 #define SOUND_BASE 0x000 /* <-----------<< sound address of this card or 0 */ 89 #endif 90 91 /* 92 * some more or less user dependent definitions - service them! 93 */ 94 95 /* Set this to 0 after you have configured your interface definitions right. */ 96 #define DISTRIBUTION 1 97 98 /* max. number of audio frames to read with one */ 99 /* request (allocates n* 2352 bytes kernel memory!) */ 100 /* may be freely adjusted, f.e. 75 (= 1 sec.), at */ 101 /* runtime by use of the CDROMAUDIOBUFSIZ ioctl. */ 102 #define READ_AUDIO 0 103 104 /* tray control: eject tray if no disk is in (0 or 1) */ 105 #define JUKEBOX 1 106 107 /* tray control: eject tray after last use (0 or 1) */ 108 #define EJECT 1 109 110 /*==========================================================================*/ 111 /*==========================================================================*/ 112 /* 113 * nothing to change below here if you are not experimenting 114 */ 115 #ifndef _LINUX_SBPCD_H 116 117 #define _LINUX_SBPCD_H 118 /*==========================================================================*/ 119 /*==========================================================================*/ 120 #define LONG_TIMING 0 /* test against timeouts with "gold" CDs on CR-521 */ 121 #undef FUTURE 122 123 #define TEST_UPC 0 124 #define SPEA_TEST 0 125 #define TEST_STI 0 126 #undef PATH_CHECK 127 /*==========================================================================*/ 128 /* 129 * DDI interface definitions 130 * "invented" by Fred N. van Kempen.. 131 */ 132 #define DDIOCSDBG 0x9000 133 134 /*==========================================================================*/ 135 /* 136 * "private" IOCTL functions 137 */ 138 #define CDROMRESET 0x5380 /* hard-rest the drive */ 139 #define CDROMVOLREAD 0x5381 /* let the drive tell its volume settings */ 140 #define CDROMAUDIOBUFSIZ 0x5382 /* set the audio buffer size */ 141 142 /*==========================================================================*/ 143 /* 144 * Debug output levels 145 */ 146 #define DBG_INF 1 /* necessary information */ 147 #define DBG_BSZ 2 /* BLOCK_SIZE trace */ 148 #define DBG_REA 3 /* READ status trace */ 149 #define DBG_CHK 4 /* MEDIA CHECK trace */ 150 #define DBG_TIM 5 /* datarate timer test */ 151 #define DBG_INI 6 /* initialization trace */ 152 #define DBG_TOC 7 /* tell TocEntry values */ 153 #define DBG_IOC 8 /* ioctl trace */ 154 #define DBG_STA 9 /* ResponseStatus() trace */ 155 #define DBG_ERR 10 /* cc_ReadError() trace */ 156 #define DBG_CMD 11 /* cmd_out() trace */ 157 #define DBG_WRN 12 /* give explanation before auto-probing */ 158 #define DBG_MUL 13 /* multi session code test */ 159 #define DBG_IDX 14 /* test code for drive_id !=0 */ 160 #define DBG_IOX 15 /* some special information */ 161 #define DBG_DID 16 /* drive ID test */ 162 #define DBG_RES 17 /* drive reset info */ 163 #define DBG_SPI 18 /* SpinUp test */ 164 #define DBG_IOS 19 /* ioctl trace: subchannel functions */ 165 #define DBG_IO2 20 /* ioctl trace: general */ 166 #define DBG_UPC 21 /* show UPC information */ 167 #define DBG_XA1 22 /* XA mode debugging */ 168 #define DBG_LCK 23 /* door (un)lock info */ 169 #define DBG_SQ1 24 /* dump SubQ frame */ 170 #define DBG_AUD 25 /* READ AUDIO debugging */ 171 #define DBG_SEQ 26 /* Sequoia interface configuration trace */ 172 #define DBG_LCS 27 /* Longshine LCS-7260 debugging trace */ 173 #define DBG_CD2 28 /* MKE CD200 debugging trace */ 174 #define DBG_TEA 29 /* TEAC CD-55A debugging trace */ 175 #define DBG_TE2 30 /* TEAC CD-55A 2nd debugging level */ 176 #define DBG_000 31 /* unnecessary information */ 177 178 /*==========================================================================*/ 179 /*==========================================================================*/ 180 181 /* 182 * bits of flags_cmd_out: 183 */ 184 #define f_respo3 0x100 185 #define f_putcmd 0x80 186 #define f_respo2 0x40 187 #define f_lopsta 0x20 188 #define f_getsta 0x10 189 #define f_ResponseStatus 0x08 190 #define f_obey_p_check 0x04 191 #define f_bit1 0x02 192 #define f_wait_if_busy 0x01 193 194 /* 195 * diskstate_flags: 196 */ 197 #define x80_bit 0x80 198 #define upc_bit 0x40 199 #define volume_bit 0x20 200 #define toc_bit 0x10 201 #define multisession_bit 0x08 202 #define cd_size_bit 0x04 203 #define subq_bit 0x02 204 #define frame_size_bit 0x01 205 206 /* 207 * disk states (bits of diskstate_flags): 208 */ 209 #define upc_valid (D_S[d].diskstate_flags&upc_bit) 210 #define volume_valid (D_S[d].diskstate_flags&volume_bit) 211 #define toc_valid (D_S[d].diskstate_flags&toc_bit) 212 #define cd_size_valid (D_S[d].diskstate_flags&cd_size_bit) 213 #define subq_valid (D_S[d].diskstate_flags&subq_bit) 214 #define frame_size_valid (D_S[d].diskstate_flags&frame_size_bit) 215 216 /* 217 * the status_bits variable 218 */ 219 #define p_success 0x100 220 #define p_door_closed 0x80 221 #define p_caddy_in 0x40 222 #define p_spinning 0x20 223 #define p_check 0x10 224 #define p_busy_new 0x08 225 #define p_door_locked 0x04 226 #define p_disk_ok 0x01 227 228 /* 229 * LCS-7260 special status result bits: 230 */ 231 #define p_lcs_door_locked 0x02 232 #define p_lcs_door_closed 0x01 233 234 /* 235 * CR-52x special status result bits: 236 */ 237 #define p_caddin_old 0x40 238 #define p_success_old 0x08 239 #define p_busy_old 0x04 240 #define p_bit_1 0x02 /* hopefully unused now */ 241 242 /* 243 * "generation specific" defs of the status result bits: 244 */ 245 #define p0_door_closed 0x80 246 #define p0_caddy_in 0x40 247 #define p0_spinning 0x20 248 #define p0_check 0x10 249 #define p0_success 0x08 /* unused */ 250 #define p0_busy 0x04 251 #define p0_bit_1 0x02 /* unused */ 252 #define p0_disk_ok 0x01 253 254 #define pL_disk_in 0x40 255 #define pL_spinning 0x20 256 #define pL_check 0x10 257 #define pL_success 0x08 /* unused ?? */ 258 #define pL_busy 0x04 259 #define pL_door_locked 0x02 260 #define pL_door_closed 0x01 261 262 #define p1_door_closed 0x80 263 #define p1_disk_in 0x40 264 #define p1_spinning 0x20 265 #define p1_check 0x10 266 #define p1_busy 0x08 267 #define p1_door_locked 0x04 268 #define p1_bit_1 0x02 /* unused */ 269 #define p1_disk_ok 0x01 270 271 #define p2_disk_ok 0x80 272 #define p2_door_locked 0x40 273 #define p2_spinning 0x20 274 #define p2_busy2 0x10 275 #define p2_busy1 0x08 276 #define p2_door_closed 0x04 277 #define p2_disk_in 0x02 278 #define p2_check 0x01 279 280 /* 281 * used drive states: 282 */ 283 #define st_door_closed (D_S[d].status_bits&p_door_closed) 284 #define st_caddy_in (D_S[d].status_bits&p_caddy_in) 285 #define st_spinning (D_S[d].status_bits&p_spinning) 286 #define st_check (D_S[d].status_bits&p_check) 287 #define st_busy (D_S[d].status_bits&p_busy_new) 288 #define st_door_locked (D_S[d].status_bits&p_door_locked) 289 #define st_diskok (D_S[d].status_bits&p_disk_ok) 290 291 /* 292 * bits of the CDi_status register: 293 */ 294 #define s_not_result_ready 0x04 /* 0: "result ready" */ 295 #define s_not_data_ready 0x02 /* 0: "data ready" */ 296 #define s_attention 0x01 /* 1: "attention required" */ 297 /* 298 * usable as: 299 */ 300 #define DRV_ATTN ((inb(CDi_status)&s_attention)!=0) 301 #define DATA_READY ((inb(CDi_status)&s_not_data_ready)==0) 302 #define RESULT_READY ((inb(CDi_status)&s_not_result_ready)==0) 303 304 /* 305 * drive types (firmware versions): 306 */ 307 #define drv_fam0 0x08 /* CR-52x family */ 308 #define drv_199 (drv_fam0+0x01) /* <200 */ 309 #define drv_200 (drv_fam0+0x02) /* <201 */ 310 #define drv_201 (drv_fam0+0x03) /* <210 */ 311 #define drv_210 (drv_fam0+0x04) /* <211 */ 312 #define drv_211 (drv_fam0+0x05) /* <300 */ 313 #define drv_300 (drv_fam0+0x06) /* >=300 */ 314 315 #define drv_famL 0x10 /* Longshine family */ 316 #define drv_260 (drv_famL+0x01) /* LCS-7260 */ 317 #define drv_e1 (drv_famL+0x01) /* LCS-7260, firmware "A E1" */ 318 #define drv_f4 (drv_famL+0x02) /* LCS-7260, firmware "A4F4" */ 319 320 #define drv_fam1 0x20 /* CR-56x family */ 321 #define drv_099 (drv_fam1+0x01) /* <100 */ 322 #define drv_100 (drv_fam1+0x02) /* >=100, only 5.00 known here */ 323 324 #define drv_famT 0x40 /* TEAC CD-55A */ 325 #define drv_fam2 0x80 /* CD200 family */ 326 327 #define fam0_drive (D_S[d].drv_type&drv_fam0) 328 #define famL_drive (D_S[d].drv_type&drv_famL) 329 #define fam1_drive (D_S[d].drv_type&drv_fam1) 330 #define fam2_drive (D_S[d].drv_type&drv_fam2) 331 #define famT_drive (D_S[d].drv_type&drv_famT) 332 #define fam0L_drive (D_S[d].drv_type&(drv_fam0|drv_famL)) 333 #define fam1L_drive (D_S[d].drv_type&(drv_fam1|drv_famL)) 334 #define fam01_drive (D_S[d].drv_type&(drv_fam0|drv_fam1)) 335 #define fam12_drive (D_S[d].drv_type&(drv_fam1|drv_fam2)) 336 #define fam2T_drive (D_S[d].drv_type&(drv_fam2|drv_famT)) 337 338 /* 339 * audio states: 340 */ 341 #define audio_playing 2 342 #define audio_pausing 1 343 344 /* 345 * drv_pattern, drv_options: 346 */ 347 #define speed_auto 0x80 348 #define speed_300 0x40 349 #define speed_150 0x20 350 #define audio_mono 0x04 351 352 /* 353 * values of cmd_type (0 else): 354 */ 355 #define READ_M1 0x01 /* "data mode 1": 2048 bytes per frame */ 356 #define READ_M2 0x02 /* "data mode 2": 12+2048+280 bytes per frame */ 357 #define READ_SC 0x04 /* "subchannel info": 96 bytes per frame */ 358 #define READ_AU 0x08 /* "audio frame": 2352 bytes per frame */ 359 360 /* 361 * sense_byte: 362 * 363 * values: 00 364 * 01 365 * 81 366 * 82 "raw audio" mode 367 * xx from infobuf[0] after 85 00 00 00 00 00 00 368 */ 369 370 /* audio status (bin) */ 371 #define aud_00 0x00 /* Audio status byte not supported or not valid */ 372 #define audx11 0x0b /* Audio play operation in progress */ 373 #define audx12 0x0c /* Audio play operation paused */ 374 #define audx13 0x0d /* Audio play operation successfully completed */ 375 #define audx14 0x0e /* Audio play operation stopped due to error */ 376 #define audx15 0x0f /* No current audio status to return */ 377 378 /* audio status (bcd) */ 379 #define aud_11 0x11 /* Audio play operation in progress */ 380 #define aud_12 0x12 /* Audio play operation paused */ 381 #define aud_13 0x13 /* Audio play operation successfully completed */ 382 #define aud_14 0x14 /* Audio play operation stopped due to error */ 383 #define aud_15 0x15 /* No current audio status to return */ 384 385 386 /* 387 * highest allowed drive number (MINOR+1) 388 */ 389 #define NR_SBPCD 4 390 391 /* 392 * we try to never disable interrupts - seems to work 393 */ 394 #define SBPCD_DIS_IRQ 0 395 396 /* 397 * "write byte to port" 398 */ 399 #define OUT(x,y) outb(y,x) 400 401 /*==========================================================================*/ 402 403 #define MIXER_CD_Volume 0x28 /* internal SB Pro register address */ 404 405 /*==========================================================================*/ 406 /* 407 * Creative Labs Programmers did this: 408 */ 409 #define MAX_TRACKS 120 /* why more than 99? */ 410 411 /*==========================================================================*/ 412 /* 413 * To make conversions easier (machine dependent!) 414 */ 415 typedef union _msf 416 { 417 u_int n; 418 u_char c[4]; 419 } MSF; 420 421 typedef union _blk 422 { 423 u_int n; 424 u_char c[4]; 425 } BLK; 426 427 /*==========================================================================*/ 428 429 /*============================================================================ 430 ============================================================================== 431 432 COMMAND SET of "old" drives like CR-521, CR-522 433 (the CR-562 family is different): 434 435 No. Command Code 436 -------------------------------------------- 437 438 Drive Commands: 439 1 Seek 01 440 2 Read Data 02 441 3 Read XA-Data 03 442 4 Read Header 04 443 5 Spin Up 05 444 6 Spin Down 06 445 7 Diagnostic 07 446 8 Read UPC 08 447 9 Read ISRC 09 448 10 Play Audio 0A 449 11 Play Audio MSF 0B 450 12 Play Audio Track/Index 0C 451 452 Status Commands: 453 13 Read Status 81 454 14 Read Error 82 455 15 Read Drive Version 83 456 16 Mode Select 84 457 17 Mode Sense 85 458 18 Set XA Parameter 86 459 19 Read XA Parameter 87 460 20 Read Capacity 88 461 21 Read SUB_Q 89 462 22 Read Disc Code 8A 463 23 Read Disc Information 8B 464 24 Read TOC 8C 465 25 Pause/Resume 8D 466 26 Read Packet 8E 467 27 Read Path Check 00 468 469 470 all numbers (lba, msf-bin, msf-bcd, counts) to transfer high byte first 471 472 mnemo 7-byte command #bytes response (r0...rn) 473 ________ ____________________ ____ 474 475 Read Status: 476 status: 81. (1) one-byte command, gives the main 477 status byte 478 Read Error: 479 check1: 82 00 00 00 00 00 00. (6) r1: audio status 480 481 Read Packet: 482 check2: 8e xx 00 00 00 00 00. (xx) gets xx bytes response, relating 483 to commands 01 04 05 07 08 09 484 485 Play Audio: 486 play: 0a ll-bb-aa nn-nn-nn. (0) play audio, ll-bb-aa: starting block (lba), 487 nn-nn-nn: #blocks 488 Play Audio MSF: 489 0b mm-ss-ff mm-ss-ff (0) play audio from/to 490 491 Play Audio Track/Index: 492 0c ... 493 494 Pause/Resume: 495 pause: 8d pr 00 00 00 00 00. (0) pause (pr=00) 496 resume (pr=80) audio playing 497 498 Mode Select: 499 84 00 nn-nn ??-?? 00 (0) nn-nn: 2048 or 2340 500 possibly defines transfer size 501 502 set_vol: 84 83 00 00 sw le 00. (0) sw(itch): lrxxxxxx (off=1) 503 le(vel): min=0, max=FF, else half 504 (firmware 2.11) 505 506 Mode Sense: 507 get_vol: 85 03 00 00 00 00 00. (2) tell current audio volume setting 508 509 Read Disc Information: 510 tocdesc: 8b 00 00 00 00 00 00. (6) read the toc descriptor ("msf-bin"-format) 511 512 Read TOC: 513 tocent: 8c fl nn 00 00 00 00. (8) read toc entry #nn 514 (fl=0:"lba"-, =2:"msf-bin"-format) 515 516 Read Capacity: 517 capacit: 88 00 00 00 00 00 00. (5) "read CD-ROM capacity" 518 519 520 Read Path Check: 521 ping: 00 00 00 00 00 00 00. (2) r0=AA, r1=55 522 ("ping" if the drive is connected) 523 524 Read Drive Version: 525 ident: 83 00 00 00 00 00 00. (12) gives "MATSHITAn.nn" 526 (n.nn = 2.01, 2.11., 3.00, ...) 527 528 Seek: 529 seek: 01 00 ll-bb-aa 00 00. (0) 530 seek: 01 02 mm-ss-ff 00 00. (0) 531 532 Read Data: 533 read: 02 xx-xx-xx nn-nn fl. (??) read nn-nn blocks of 2048 bytes, 534 starting at block xx-xx-xx 535 fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx 536 537 Read XA-Data: 538 read: 03 xx-xx-xx nn-nn fl. (??) read nn-nn blocks of 2340 bytes, 539 starting at block xx-xx-xx 540 fl=0: "lba"-, =2:"msf-bcd"-coded xx-xx-xx 541 542 Read SUB_Q: 543 89 fl 00 00 00 00 00. (13) r0: audio status, r4-r7: lba/msf, 544 fl=0: "lba", fl=2: "msf" 545 546 Read Disc Code: 547 8a 00 00 00 00 00 00. (14) possibly extended "check condition"-info 548 549 Read Header: 550 04 00 ll-bb-aa 00 00. (0) 4 bytes response with "check2" 551 04 02 mm-ss-ff 00 00. (0) 4 bytes response with "check2" 552 553 Spin Up: 554 05 00 ll-bb-aa 00 00. (0) possibly implies a "seek" 555 556 Spin Down: 557 06 ... 558 559 Diagnostic: 560 07 00 ll-bb-aa 00 00. (2) 2 bytes response with "check2" 561 07 02 mm-ss-ff 00 00. (2) 2 bytes response with "check2" 562 563 Read UPC: 564 08 00 ll-bb-aa 00 00. (16) 565 08 02 mm-ss-ff 00 00. (16) 566 567 Read ISRC: 568 09 00 ll-bb-aa 00 00. (15) 15 bytes response with "check2" 569 09 02 mm-ss-ff 00 00. (15) 15 bytes response with "check2" 570 571 Set XA Parameter: 572 86 ... 573 574 Read XA Parameter: 575 87 ... 576 577 ============================================================================== 578 ============================================================================*/ 579 580 /* 581 * commands 582 * 583 * CR-52x: CMD0_ 584 * CR-56x: CMD1_ 585 * CD200: CMD2_ 586 * LCS-7260: CMDL_ 587 * TEAC CD-55A: CMDT_ 588 */ 589 #define CMD1_RESET 0x0a 590 #define CMD2_RESET 0x01 591 #define CMDT_RESET 0xc0 592 593 #define CMD1_LOCK_CTL 0x0c 594 #define CMD2_LOCK_CTL 0x1e 595 #define CMDT_LOCK_CTL CMD2_LOCK_CTL 596 #define CMDL_LOCK_CTL 0x0e 597 598 #define CMD1_TRAY_CTL 0x07 599 #define CMD2_TRAY_CTL 0x1b 600 #define CMDT_TRAY_CTL CMD2_TRAY_CTL 601 #define CMDL_TRAY_CTL 0x0d 602 603 #define CMD1_MULTISESS 0x8d 604 #define CMDL_MULTISESS 0x8c 605 606 #define CMD1_SUBCHANINF 0x11 607 #define CMD2_SUBCHANINF 0x?? 608 609 #define CMD2_x02 0x02 610 #define CMD1_x08 0x08 611 #define CMD2_x08 0x08 612 #define CMDT_x08 0x08 613 614 #define CMD2_SETSPEED 0xda 615 616 #define CMD0_PATH_CHECK 0x00 617 #define CMD1_PATH_CHECK 0x??? 618 #define CMD2_PATH_CHECK 0x??? 619 #define CMDT_PATH_CHECK 0x??? 620 #define CMDL_PATH_CHECK CMD0_PATH_CHECK 621 622 #define CMD0_SEEK 0x01 623 #define CMD1_SEEK CMD0_SEEK 624 #define CMD2_SEEK 0x2b 625 #define CMDT_SEEK CMD2_SEEK 626 #define CMDL_SEEK CMD0_SEEK 627 628 #define CMD0_READ 0x02 629 #define CMD1_READ 0x10 630 #define CMD2_READ 0x28 631 #define CMDT_READ CMD2_READ 632 #define CMDL_READ CMD0_READ 633 634 #define CMD0_READ_XA 0x03 635 #define CMD2_READ_XA 0xd4 636 #define CMDL_READ_XA CMD0_READ_XA /* really ?? */ 637 638 #define CMD0_READ_HEAD 0x04 639 640 #define CMD0_SPINUP 0x05 641 #define CMD1_SPINUP 0x02 642 #define CMD2_SPINUP CMD2_TRAY_CTL 643 #define CMDL_SPINUP CMD0_SPINUP 644 645 #define CMD0_SPINDOWN 0x06 /* really??? */ 646 #define CMD1_SPINDOWN 0x06 647 #define CMD2_SPINDOWN CMD2_TRAY_CTL 648 #define CMDL_SPINDOWN 0x0d 649 650 #define CMD0_DIAG 0x07 651 652 #define CMD0_READ_UPC 0x08 653 #define CMD1_READ_UPC 0x88 654 #define CMD2_READ_UPC 0x??? 655 #define CMDL_READ_UPC CMD0_READ_UPC 656 657 #define CMD0_READ_ISRC 0x09 658 659 #define CMD0_PLAY 0x0a 660 #define CMD1_PLAY 0x??? 661 #define CMD2_PLAY 0x??? 662 #define CMDL_PLAY CMD0_PLAY 663 664 #define CMD0_PLAY_MSF 0x0b 665 #define CMD1_PLAY_MSF 0x0e 666 #define CMD2_PLAY_MSF 0x47 667 #define CMDT_PLAY_MSF CMD2_PLAY_MSF 668 #define CMDL_PLAY_MSF 0x??? 669 670 #define CMD0_PLAY_TI 0x0c 671 672 #define CMD0_STATUS 0x81 673 #define CMD1_STATUS 0x05 674 #define CMD2_STATUS 0x00 675 #define CMDT_STATUS CMD2_STATUS 676 #define CMDL_STATUS CMD0_STATUS 677 678 #define CMD0_READ_ERR 0x82 679 #define CMD1_READ_ERR CMD0_READ_ERR 680 #define CMD2_READ_ERR 0x03 681 #define CMDT_READ_ERR CMD2_READ_ERR /* get audio status */ 682 #define CMDL_READ_ERR CMD0_READ_ERR 683 684 #define CMD0_READ_VER 0x83 685 #define CMD1_READ_VER CMD0_READ_VER 686 #define CMD2_READ_VER 0x12 687 #define CMDT_READ_VER CMD2_READ_VER /* really ?? */ 688 #define CMDL_READ_VER CMD0_READ_VER 689 690 #define CMD0_SETMODE 0x84 691 #define CMD1_SETMODE 0x09 692 #define CMD2_SETMODE 0x55 693 #define CMDT_SETMODE CMD2_SETMODE 694 #define CMDL_SETMODE CMD0_SETMODE 695 696 #define CMD0_GETMODE 0x85 697 #define CMD1_GETMODE 0x84 698 #define CMD2_GETMODE 0x5a 699 #define CMDT_GETMODE CMD2_GETMODE 700 #define CMDL_GETMODE CMD0_GETMODE 701 702 #define CMD0_SET_XA 0x86 703 704 #define CMD0_GET_XA 0x87 705 706 #define CMD0_CAPACITY 0x88 707 #define CMD1_CAPACITY 0x85 708 #define CMD2_CAPACITY 0x25 709 #define CMDL_CAPACITY CMD0_CAPACITY /* missing in some firmware versions */ 710 711 #define CMD0_READSUBQ 0x89 712 #define CMD1_READSUBQ 0x87 713 #define CMD2_READSUBQ 0x42 714 #define CMDT_READSUBQ CMD2_READSUBQ 715 #define CMDL_READSUBQ CMD0_READSUBQ 716 717 #define CMD0_DISKCODE 0x8a 718 719 #define CMD0_DISKINFO 0x8b 720 #define CMD1_DISKINFO CMD0_DISKINFO 721 #define CMD2_DISKINFO 0x43 722 #define CMDT_DISKINFO CMD2_DISKINFO 723 #define CMDL_DISKINFO CMD0_DISKINFO 724 725 #define CMD0_READTOC 0x8c 726 #define CMD1_READTOC CMD0_READTOC 727 #define CMD2_READTOC 0x??? 728 #define CMDL_READTOC CMD0_READTOC 729 730 #define CMD0_PAU_RES 0x8d 731 #define CMD1_PAU_RES 0x0d 732 #define CMD2_PAU_RES 0x4b 733 #define CMDT_PAUSE CMD2_PAU_RES 734 #define CMDL_PAU_RES CMD0_PAU_RES 735 736 #define CMD0_PACKET 0x8e 737 #define CMD1_PACKET CMD0_PACKET 738 #define CMD2_PACKET 0x??? 739 #define CMDL_PACKET CMD0_PACKET 740 741 /*==========================================================================*/ 742 /*==========================================================================*/ 743 #endif _LINUX_SBPCD_H 744 /*==========================================================================*/ 745 /* 746 * Overrides for Emacs so that we follow Linus's tabbing style. 747 * Emacs will notice this stuff at the end of the file and automatically 748 * adjust the settings for this buffer only. This must remain at the end 749 * of the file. 750 * --------------------------------------------------------------------------- 751 * Local variables: 752 * c-indent-level: 8 753 * c-brace-imaginary-offset: 0 754 * c-brace-offset: -8 755 * c-argdecl-indent: 8 756 * c-label-offset: -8 757 * c-continued-statement-offset: 8 758 * c-continued-brace-offset: 0 759 * End: 760 */