tag | line | file | source code |
__u8 | 3 | drivers/scsi/eata_dma_proc.h | __u8 id:5, |
__u8 | 5 | drivers/scsi/eata_dma_proc.h | __u8 lun; |
__u8 | 9 | drivers/scsi/eata_dma_proc.h | __u8 p_code:6, |
__u8 | 12 | drivers/scsi/eata_dma_proc.h | __u8 p_length; |
__u8 | 14 | drivers/scsi/eata_dma_proc.h | __u8 heads; |
__u8 | 15 | drivers/scsi/eata_dma_proc.h | __u8 sectors; |
__u8 | 16 | drivers/scsi/eata_dma_proc.h | __u8 null2; |
__u8 | 17 | drivers/scsi/eata_dma_proc.h | __u8 s_lunmap:4, |
__u8 | 27 | drivers/scsi/eata_dma_proc.h | __u8 page_code, |
__u8 | 37 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 38 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x24 */ |
__u8 | 52 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 53 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x28 */ |
__u8 | 68 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 69 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x30 */ |
__u8 | 75 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 76 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x34 */ |
__u8 | 82 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 83 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x10 */ |
__u8 | 94 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 95 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x02 */ |
__u8 | 96 | drivers/scsi/eata_dma_proc.h | __u8 intt:1, |
__u8 | 103 | drivers/scsi/eata_dma_proc.h | __u8 interrupt; |
__u8 | 108 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 109 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x02 */ |
__u8 | 110 | drivers/scsi/eata_dma_proc.h | __u8 unused:1, |
__u8 | 112 | drivers/scsi/eata_dma_proc.h | __u8 interrupt; |
__u8 | 117 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 118 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x04 */ |
__u8 | 124 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 125 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x04 */ |
__u8 | 126 | drivers/scsi/eata_dma_proc.h | __u8 offset, |
__u8 | 133 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 134 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x02 */ |
__u8 | 135 | drivers/scsi/eata_dma_proc.h | __u8 que:1, |
__u8 | 141 | drivers/scsi/eata_dma_proc.h | __u8 reserved; |
__u8 | 146 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 147 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x02 */ |
__u8 | 148 | drivers/scsi/eata_dma_proc.h | __u8 speed:6, |
__u8 | 151 | drivers/scsi/eata_dma_proc.h | __u8 reserved; |
__u8 | 156 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 157 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x02 */ |
__u8 | 158 | drivers/scsi/eata_dma_proc.h | __u8 speed:4, |
__u8 | 163 | drivers/scsi/eata_dma_proc.h | __u8 busnum; |
__u8 | 168 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 169 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x04 */ |
__u8 | 170 | drivers/scsi/eata_dma_proc.h | __u8 unused:1, |
__u8 | 178 | drivers/scsi/eata_dma_proc.h | __u8 cpu_type, |
__u8 | 180 | drivers/scsi/eata_dma_proc.h | __u8 sx1:1, |
__u8 | 189 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 190 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x04 */ |
__u8 | 191 | drivers/scsi/eata_dma_proc.h | __u8 banksize[4]; |
__u8 | 196 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 197 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x04 */ |
__u8 | 198 | drivers/scsi/eata_dma_proc.h | __u8 dnld:1, |
__u8 | 202 | drivers/scsi/eata_dma_proc.h | __u8 unused1, |
__u8 | 209 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 210 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x02 */ |
__u8 | 211 | drivers/scsi/eata_dma_proc.h | __u8 shlf:1, |
__u8 | 214 | drivers/scsi/eata_dma_proc.h | __u8 reserved; |
__u8 | 219 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 220 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x02 */ |
__u8 | 221 | drivers/scsi/eata_dma_proc.h | __u8 channel; |
__u8 | 222 | drivers/scsi/eata_dma_proc.h | __u8 shlf:1, |
__u8 | 234 | drivers/scsi/eata_dma_proc.h | __u8 flags; |
__u8 | 235 | drivers/scsi/eata_dma_proc.h | __u8 length; /* 0x04 */ |
__u8 | 236 | drivers/scsi/eata_dma_proc.h | __u8 max_groups, |
__u8 | 172 | drivers/scsi/eata_generic.h | __u8 error:1; /* previous command ended in an error */ |
__u8 | 173 | drivers/scsi/eata_generic.h | __u8 more:1; /* more DATA coming soon, poll BSY & DRQ (PIO) */ |
__u8 | 174 | drivers/scsi/eata_generic.h | __u8 corr:1; /* data read was successfully corrected with ECC*/ |
__u8 | 175 | drivers/scsi/eata_generic.h | __u8 drq:1; /* data request active */ |
__u8 | 176 | drivers/scsi/eata_generic.h | __u8 sc:1; /* seek complete */ |
__u8 | 177 | drivers/scsi/eata_generic.h | __u8 fault:1; /* write fault */ |
__u8 | 178 | drivers/scsi/eata_generic.h | __u8 ready:1; /* drive ready */ |
__u8 | 179 | drivers/scsi/eata_generic.h | __u8 busy:1; /* controller busy */ |
__u8 | 183 | drivers/scsi/eata_generic.h | __u8 abusy:1; /* auxiliary busy */ |
__u8 | 184 | drivers/scsi/eata_generic.h | __u8 irq:1; /* set when drive interrupt is asserted */ |
__u8 | 185 | drivers/scsi/eata_generic.h | __u8 dummy:6; |
__u8 | 189 | drivers/scsi/eata_generic.h | __u8 data_reg[2]; /* R, couldn't figure this one out */ |
__u8 | 190 | drivers/scsi/eata_generic.h | __u8 cp_addr[4]; /* W, CP address register */ |
__u8 | 192 | drivers/scsi/eata_generic.h | __u8 command; /* W, command code: [read|set] conf, send CP*/ |
__u8 | 194 | drivers/scsi/eata_generic.h | __u8 statusbyte; |
__u8 | 202 | drivers/scsi/eata_generic.h | __u8 version2:4, |
__u8 | 204 | drivers/scsi/eata_generic.h | __u8 OCS_enabled:1, /* Overlap Command Support enabled */ |
__u8 | 217 | drivers/scsi/eata_generic.h | __u8 scsi_id[4]; /* SCSI ID of controller 2-0 Byte 0 res. * |
__u8 | 225 | drivers/scsi/eata_generic.h | __u8 IRQ:4, /* IRQ used this HA */ |
__u8 | 229 | drivers/scsi/eata_generic.h | __u8 sync; /* device at ID 7 tru 0 is running in * |
__u8 | 231 | drivers/scsi/eata_generic.h | __u8 DSBLE:1, /* ISA i/o addressing is disabled */ |
__u8 | 236 | drivers/scsi/eata_generic.h | __u8 MAX_ID:5, /* Max number of SCSI target IDs */ |
__u8 | 238 | drivers/scsi/eata_generic.h | __u8 MAX_LUN; /* Max number of LUNs */ |
__u8 | 239 | drivers/scsi/eata_generic.h | __u8 :3, |
__u8 | 245 | drivers/scsi/eata_generic.h | __u8 unused[478]; |
__u8 | 256 | drivers/scsi/eata_generic.h | __u8 SCSI_Reset:1, /* Cause a SCSI Bus reset on the cmd */ |
__u8 | 264 | drivers/scsi/eata_generic.h | __u8 reqlen; /* Request Sense Length * |
__u8 | 266 | drivers/scsi/eata_generic.h | __u8 unused[3]; |
__u8 | 267 | drivers/scsi/eata_generic.h | __u8 FWNEST:1, /* send cmd to phys RAID component */ |
__u8 | 269 | drivers/scsi/eata_generic.h | __u8 Phsunit:1, /* physical unit on mirrored pair */ |
__u8 | 274 | drivers/scsi/eata_generic.h | __u8 cp_id:5, /* SCSI Device ID of target */ |
__u8 | 276 | drivers/scsi/eata_generic.h | __u8 cp_lun:3, |
__u8 | 281 | drivers/scsi/eata_generic.h | __u8 cp_msg1; /* Message bytes 0-3 */ |
__u8 | 282 | drivers/scsi/eata_generic.h | __u8 cp_msg2; |
__u8 | 283 | drivers/scsi/eata_generic.h | __u8 cp_msg3; |
__u8 | 284 | drivers/scsi/eata_generic.h | __u8 cp_cdb[12]; /* Command Descriptor Block */ |
__u8 | 296 | drivers/scsi/eata_generic.h | __u8 sizeindex; |
__u8 | 297 | drivers/scsi/eata_generic.h | __u8 rw_latency; |
__u8 | 298 | drivers/scsi/eata_generic.h | __u8 retries; |
__u8 | 299 | drivers/scsi/eata_generic.h | __u8 status; /* status of this queueslot */ |
__u8 | 306 | drivers/scsi/eata_generic.h | __u8 hba_stat:7, /* HBA status */ |
__u8 | 308 | drivers/scsi/eata_generic.h | __u8 scsi_stat; /* Target SCSI status */ |
__u8 | 309 | drivers/scsi/eata_generic.h | __u8 reserved[2]; |
__u8 | 312 | drivers/scsi/eata_generic.h | __u8 msg[12]; |
__u8 | 316 | drivers/scsi/eata_generic.h | __u8 vendor[9]; |
__u8 | 317 | drivers/scsi/eata_generic.h | __u8 name[18]; |
__u8 | 318 | drivers/scsi/eata_generic.h | __u8 revision[6]; |
__u8 | 319 | drivers/scsi/eata_generic.h | __u8 EATA_revision; |
__u8 | 320 | drivers/scsi/eata_generic.h | __u8 bustype; /* bustype of HBA */ |
__u8 | 321 | drivers/scsi/eata_generic.h | __u8 channel; /* # of avail. scsi channels */ |
__u8 | 322 | drivers/scsi/eata_generic.h | __u8 state; /* state of HBA */ |
__u8 | 323 | drivers/scsi/eata_generic.h | __u8 primary; /* true if primary */ |
__u8 | 324 | drivers/scsi/eata_generic.h | __u8 broken_INQUIRY:1; /* This is an EISA HBA with * |
__u8 | 326 | drivers/scsi/eata_generic.h | __u8 do_latency; /* Latency measurement flag */ |
__u8 | 332 | drivers/scsi/eata_generic.h | __u8 t_state[MAXCHANNEL][MAXTARGET]; |
__u8 | 338 | drivers/scsi/eata_generic.h | __u8 hostid; /* SCSI ID of HBA */ |
__u8 | 339 | drivers/scsi/eata_generic.h | __u8 devflags; /* bits set for detected devices */ |
__u8 | 340 | drivers/scsi/eata_generic.h | __u8 moresupport; /* HBA supports MORE flag */ |
__u8 | 349 | drivers/scsi/eata_generic.h | __u8 trans; /* translation flag 1=transl */ |
__u8 | 350 | drivers/scsi/eata_generic.h | __u8 channel; /* SCSI channel number */ |
__u8 | 351 | drivers/scsi/eata_generic.h | __u8 HBA; /* HBA number (prim/sec) */ |
__u8 | 352 | drivers/scsi/eata_generic.h | __u8 id; /* drive id */ |
__u8 | 353 | drivers/scsi/eata_generic.h | __u8 lun; /* drive lun */ |
__u8 | 360 | drivers/scsi/eata_generic.h | __u8 bios_drives; /* number of emulated drives */ |
__u8 | 15 | include/linux/atalk.h | #define ATADDR_ANYNODE (__u8)0 |
__u8 | 16 | include/linux/atalk.h | #define ATADDR_ANYPORT (__u8)0 |
__u8 | 17 | include/linux/atalk.h | #define ATADDR_BCAST (__u8)255 |
__u8 | 23 | include/linux/atalk.h | __u8 s_node; |
__u8 | 29 | include/linux/atalk.h | __u8 sat_port; |
__u8 | 36 | include/linux/atalk.h | __u8 nr_phase; |
__u8 | 83 | include/linux/atalk.h | __u8 deh_dnode; |
__u8 | 84 | include/linux/atalk.h | __u8 deh_snode; |
__u8 | 85 | include/linux/atalk.h | __u8 deh_dport; |
__u8 | 86 | include/linux/atalk.h | __u8 deh_sport; |
__u8 | 97 | include/linux/atalk.h | __u8 dsh_sport; |
__u8 | 98 | include/linux/atalk.h | __u8 dsh_dport; |
__u8 | 111 | include/linux/atalk.h | __u8 hw_len; |
__u8 | 112 | include/linux/atalk.h | __u8 pa_len; |
__u8 | 118 | include/linux/atalk.h | __u8 hw_src[ETH_ALEN] __attribute__ ((packed)); |
__u8 | 119 | include/linux/atalk.h | __u8 pa_src_zero __attribute__ ((packed)); |
__u8 | 121 | include/linux/atalk.h | __u8 pa_src_node __attribute__ ((packed)); |
__u8 | 122 | include/linux/atalk.h | __u8 hw_dst[ETH_ALEN] __attribute__ ((packed)); |
__u8 | 123 | include/linux/atalk.h | __u8 pa_dst_zero __attribute__ ((packed)); |
__u8 | 125 | include/linux/atalk.h | __u8 pa_dst_node __attribute__ ((packed)); |
__u8 | 250 | include/linux/ext2_fs.h | __u8 l_i_frag; /* Fragment number */ |
__u8 | 251 | include/linux/ext2_fs.h | __u8 l_i_fsize; /* Fragment size */ |
__u8 | 256 | include/linux/ext2_fs.h | __u8 h_i_frag; /* Fragment number */ |
__u8 | 257 | include/linux/ext2_fs.h | __u8 h_i_fsize; /* Fragment size */ |
__u8 | 264 | include/linux/ext2_fs.h | __u8 m_i_frag; /* Fragment number */ |
__u8 | 265 | include/linux/ext2_fs.h | __u8 m_i_fsize; /* Fragment size */ |
__u8 | 26 | include/linux/ext2_fs_i.h | __u8 i_frag_no; |
__u8 | 27 | include/linux/ext2_fs_i.h | __u8 i_frag_size; |
__u8 | 62 | include/linux/icmp.h | __u8 type; |
__u8 | 63 | include/linux/icmp.h | __u8 code; |
__u8 | 34 | include/linux/ip.h | __u8 len; |
__u8 | 35 | include/linux/ip.h | __u8 ptr; |
__u8 | 38 | include/linux/ip.h | __u8 flags:4, |
__u8 | 41 | include/linux/ip.h | __u8 overflow:4, |
__u8 | 46 | include/linux/ip.h | __u8 full_char; |
__u8 | 76 | include/linux/ip.h | __u8 ihl:4, |
__u8 | 79 | include/linux/ip.h | __u8 version:4, |
__u8 | 84 | include/linux/ip.h | __u8 tos; |
__u8 | 88 | include/linux/ip.h | __u8 ttl; |
__u8 | 89 | include/linux/ip.h | __u8 protocol; |
__u8 | 39 | include/linux/minix_fs.h | __u8 i_gid; |
__u8 | 40 | include/linux/minix_fs.h | __u8 i_nlinks; |
__u8 | 68 | include/linux/msdos_fs.h | __u8 sector_size[2]; /* bytes per logical sector */ |
__u8 | 69 | include/linux/msdos_fs.h | __u8 cluster_size; /* sectors/cluster */ |
__u8 | 71 | include/linux/msdos_fs.h | __u8 fats; /* number of FATs */ |
__u8 | 72 | include/linux/msdos_fs.h | __u8 dir_entries[2]; /* root directory entries */ |
__u8 | 73 | include/linux/msdos_fs.h | __u8 sectors[2]; /* number of sectors */ |
__u8 | 74 | include/linux/msdos_fs.h | __u8 media; /* media code (unused) */ |
__u8 | 84 | include/linux/msdos_fs.h | __u8 attr; /* attribute bits */ |
__u8 | 85 | include/linux/msdos_fs.h | __u8 unused[10]; |