root/include/linux/mtio.h

/* [previous][next][first][last][top][bottom][index][help] */

INCLUDED FROM


   1 /* $Id: /usr/src/linux-1.1.64/include/linux/mtio.h at Tue Jan 10 21:02:51 1995 by root@kai.home$
   2  *
   3  * linux/mtio.h header file for Linux. Written by H. Bergman
   4  */
   5 
   6 #ifndef _LINUX_MTIO_H
   7 #define _LINUX_MTIO_H
   8 
   9 #include <linux/ioctl.h>
  10 
  11 /*
  12  * Structures and definitions for mag tape io control commands
  13  */
  14 
  15 /* structure for MTIOCTOP - mag tape op command */
  16 struct  mtop {
  17         short   mt_op;          /* operations defined below */
  18         int     mt_count;       /* how many of them */
  19 };
  20 
  21 /* Magnetic Tape operations [Not all operations supported by all drivers]: */
  22 #define MTRESET 0       /* +reset drive in case of problems */
  23 #define MTFSF   1       /* forward space over FileMark,
  24                          * position at first record of next file 
  25                          */
  26 #define MTBSF   2       /* backward space FileMark (position before FM) */
  27 #define MTFSR   3       /* forward space record */
  28 #define MTBSR   4       /* backward space record */
  29 #define MTWEOF  5       /* write an end-of-file record (mark) */
  30 #define MTREW   6       /* rewind */
  31 #define MTOFFL  7       /* rewind and put the drive offline (eject?) */
  32 #define MTNOP   8       /* no op, set status only (read with MTIOCGET) */
  33 #define MTRETEN 9       /* retension tape */
  34 #define MTBSFM  10      /* +backward space FileMark, position at FM */
  35 #define MTFSFM  11      /* +forward space FileMark, position at FM */
  36 #define MTEOM   12      /* goto end of recorded media (for appending files).
  37                          * MTEOM positions after the last FM, ready for
  38                          * appending another file.
  39                          */
  40 #define MTERASE 13      /* erase tape -- be careful! */
  41 
  42 #define MTRAS1  14      /* run self test 1 (nondestructive) */
  43 #define MTRAS2  15      /* run self test 2 (destructive) */
  44 #define MTRAS3  16      /* reserved for self test 3 */
  45 
  46 
  47 #define MTSETBLK 20     /* set block length (SCSI) */
  48 #define MTSETDENSITY 21 /* set tape density (SCSI) */
  49 #define MTSEEK  22      /* seek to block (Tandberg, etc.) */
  50 #define MTTELL  23      /* tell block (Tandberg, etc.) */
  51 #define MTSETDRVBUFFER 24 /* set the drive buffering according to SCSI-2 */
  52                         /* ordinary buffered operation with code 1 */
  53 #define MTFSS   25      /* space forward over setmarks */
  54 #define MTBSS   26      /* space backward over setmarks */
  55 #define MTWSM   27      /* write setmarks */
  56 
  57 /* structure for MTIOCGET - mag tape get status command */
  58 
  59 struct  mtget {
  60         long    mt_type;        /* type of magtape device */
  61         long    mt_resid;       /* residual count: (not sure)
  62                                  *      number of bytes ignored, or
  63                                  *      number of files not skipped, or
  64                                  *      number of records not skipped.
  65                                  */
  66         /* the following registers are device dependent */
  67         long    mt_dsreg;       /* status register */
  68         long    mt_gstat;       /* generic (device independent) status */
  69         long    mt_erreg;       /* error register */
  70         /* The next two fields are not always used */
  71         daddr_t mt_fileno;      /* number of current file on tape */
  72         daddr_t mt_blkno;       /* current block number */
  73 };
  74 
  75 
  76 
  77 /*
  78  * Constants for mt_type. Not all of these are supported,
  79  * and these are not all of the ones that are supported.
  80  */
  81 #define MT_ISUNKNOWN            0x01
  82 #define MT_ISQIC02              0x02    /* Generic QIC-02 tape streamer */
  83 #define MT_ISWT5150             0x03    /* Wangtek 5150EQ, QIC-150, QIC-02 */
  84 #define MT_ISARCHIVE_5945L2     0x04    /* Archive 5945L-2, QIC-24, QIC-02? */
  85 #define MT_ISCMSJ500            0x05    /* CMS Jumbo 500 (QIC-02?) */
  86 #define MT_ISTDC3610            0x06    /* Tandberg 6310, QIC-24 */
  87 #define MT_ISARCHIVE_VP60I      0x07    /* Archive VP60i, QIC-02 */
  88 #define MT_ISARCHIVE_2150L      0x08    /* Archive Viper 2150L */
  89 #define MT_ISARCHIVE_2060L      0x09    /* Archive Viper 2060L */
  90 #define MT_ISARCHIVESC499       0x0A    /* Archive SC-499 QIC-36 controller */
  91 #define MT_ISQIC02_ALL_FEATURES 0x0F    /* Generic QIC-02 with all features */
  92 #define MT_ISWT5099EEN24        0x11    /* Wangtek 5099-een24, 60MB, QIC-24 */
  93 #define MT_ISTEAC_MT2ST         0x12    /* Teac MT-2ST 155mb drive, Teac DC-1 card (Wangtek type) */
  94 #define MT_ISEVEREX_FT40A       0x32    /* Everex FT40A (QIC-40) */
  95 #define MT_ISDDS1               0x51    /* DDS device without partitions */
  96 #define MT_ISDDS2               0x52    /* DDS device with partitions */
  97 #define MT_ISSCSI1              0x71    /* Generic ANSI SCSI-1 tape unit */
  98 #define MT_ISSCSI2              0x72    /* Generic ANSI SCSI-2 tape unit */
  99 
 100 /* QIC-40/QIC-80 ftape supported drives.
 101  * 20bit vendor ID + 0x800000
 102  */
 103 #define MT_ISFTAPE_UNKNOWN      0x800000
 104 #define MT_ISCMSDJ10_DJ20       0x800047
 105 #define MT_ISCMSDJ10_DJ20_NEW   0x8011c4
 106 #define MT_ISARCHIVE_5580I      0x800005
 107 #define MT_ISARCHIVE_XL9250I    0x80014a
 108 #define MT_ISARCHIVE_31250Q     0x800146
 109 #define MT_ISINSIGHT_80         0x810005
 110 #define MT_ISCONNER_C250MQT     0x80014c
 111 #define MT_ISWANGTEK_2040F      0x8001c1
 112 #define MT_ISWANGTEK_2080F      0x8001c8
 113 #define MT_ISIOMEGA_250         0x808880
 114 #define MT_ISSUMMIT_SE150       0x800180
 115 #define MT_ISSUMMIT_SE250       0x800181
 116 #define MT_ISESCOM_IDTBU120E    0x800140
 117 
 118 struct mt_tape_info {
 119         long t_type;            /* device type id (mt_type) */
 120         char *t_name;           /* descriptive name */
 121 };
 122 
 123 #define MT_TAPE_INFO    { \
 124         {MT_ISUNKNOWN,          "Unknown type of tape device"}, \
 125         {MT_ISQIC02,            "Generic QIC-02 tape streamer"}, \
 126         {MT_ISWT5150,           "Wangtek 5150, QIC-150"}, \
 127         {MT_ISARCHIVE_5945L2,   "Archive 5945L-2"}, \
 128         {MT_ISCMSJ500,          "CMS Jumbo 500"}, \
 129         {MT_ISTDC3610,          "Tandberg TDC 3610, QIC-24"}, \
 130         {MT_ISARCHIVE_VP60I,    "Archive VP60i, QIC-02"}, \
 131         {MT_ISARCHIVE_2150L,    "Archive Viper 2150L"}, \
 132         {MT_ISARCHIVE_2060L,    "Archive Viper 2060L"}, \
 133         {MT_ISARCHIVESC499,     "Archive SC-499 QIC-36 controller"}, \
 134         {MT_ISQIC02_ALL_FEATURES, "Generic QIC-02 tape, all features"}, \
 135         {MT_ISWT5099EEN24,      "Wangtek 5099-een24, 60MB"}, \
 136         {MT_ISTEAC_MT2ST,       "Teac MT-2ST 155mb data cassette drive"}, \
 137         {MT_ISEVEREX_FT40A,     "Everex FT40A, QIC-40"}, \
 138         {MT_ISSCSI1,            "Generic SCSI-1 tape"}, \
 139         {MT_ISSCSI2,            "Generic SCSI-2 tape"}, \
 140         {MT_ISFTAPE_UNKNOWN,    "Unknown floppy interface tape drive"},\
 141         {MT_ISCMSDJ10_DJ20,     "Colorado DJ-10/DJ-20"},\
 142         {MT_ISCMSDJ10_DJ20_NEW, "Colorado DJ-10/DJ-20 (new)"},\
 143         {MT_ISARCHIVE_5580I,    "Archive 5580i"},\
 144         {MT_ISARCHIVE_XL9250I,  "Archive XL9250i [Conner/Escom]"},\
 145         {MT_ISARCHIVE_31250Q,   "Escom/Archive 31250Q"},\
 146         {MT_ISINSIGHT_80,       "Insight 80 Mb"},\
 147         {MT_ISCONNER_C250MQT,   "Conner C250MQT"},\
 148         {MT_ISWANGTEK_2040F,    "Wangtek 3040F"},\
 149         {MT_ISWANGTEK_2080F,    "Wangtek 3080F"},\
 150         {MT_ISIOMEGA_250,       "Iomega 250"},\
 151         {MT_ISSUMMIT_SE150,     "Summit SE 150"},\
 152         {MT_ISSUMMIT_SE250,     "Summit SE 250/Mountain FS8000"},\
 153         {MT_ISESCOM_IDTBU120E,  "Identity IDTBU120E, Escom?"},\
 154         {0, NULL} \
 155 }
 156 
 157 
 158 /* structure for MTIOCPOS - mag tape get position command */
 159 
 160 struct  mtpos {
 161         long    mt_blkno;       /* current block number */
 162 };
 163 
 164 
 165 /* mag tape io control commands */
 166 #define MTIOCTOP        _IOW('m', 1, struct mtop)       /* do a mag tape op */
 167 #define MTIOCGET        _IOR('m', 2, struct mtget)      /* get tape status */
 168 #define MTIOCPOS        _IOR('m', 3, struct mtpos)      /* get tape position */
 169 
 170 /* The next two are used by the QIC-02 driver for runtime reconfiguration.
 171  * See tpqic02.h for struct mtconfiginfo.
 172  */
 173 #define MTIOCGETCONFIG  _IOR('m', 4, struct mtconfiginfo) /* get tape config */
 174 #define MTIOCSETCONFIG  _IOW('m', 5, struct mtconfiginfo) /* set tape config */
 175 
 176 
 177 /* Generic Mag Tape (device independent) status macros for examining
 178  * mt_gstat -- HP-UX compatible.
 179  * There is room for more generic status bits here, but I don't
 180  * know which of them are reserved. At least three or so should
 181  * be added to make this really useful.
 182  */
 183 #define GMT_EOF(x)              ((x) & 0x80000000)
 184 #define GMT_BOT(x)              ((x) & 0x40000000)
 185 #define GMT_EOT(x)              ((x) & 0x20000000)
 186 #define GMT_SM(x)               ((x) & 0x10000000)  /* DDS setmark */
 187 #define GMT_EOD(x)              ((x) & 0x08000000)  /* DDS EOD */
 188 #define GMT_WR_PROT(x)          ((x) & 0x04000000)
 189 /* #define GMT_ ?               ((x) & 0x02000000) */
 190 #define GMT_ONLINE(x)           ((x) & 0x01000000)
 191 #define GMT_D_6250(x)           ((x) & 0x00800000)
 192 #define GMT_D_1600(x)           ((x) & 0x00400000)
 193 #define GMT_D_800(x)            ((x) & 0x00200000)
 194 /* #define GMT_ ?               ((x) & 0x00100000) */
 195 /* #define GMT_ ?               ((x) & 0x00080000) */
 196 #define GMT_DR_OPEN(x)          ((x) & 0x00040000)  /* door open (no tape) */
 197 /* #define GMT_ ?               ((x) & 0x00020000) */
 198 #define GMT_IM_REP_EN(x)        ((x) & 0x00010000)  /* immediate report mode */
 199 /* 16 generic status bits unused */
 200 
 201 /* DDS drives have 'setmarks', sort of like filemarks but used to group
 202  * files, rather than blocks. Not used. Not supported.
 203  * I think DDS drives are DAT drives.
 204  */
 205 
 206 /* SCSI-tape specific definitions */
 207 #define MT_ST_BLKSIZE_SHIFT     0
 208 #define MT_ST_BLKSIZE_MASK      0xffffff
 209 #define MT_ST_DENSITY_SHIFT     24
 210 #define MT_ST_DENSITY_MASK      0xff000000
 211 
 212 #define MT_ST_SOFTERR_SHIFT     0
 213 #define MT_ST_SOFTERR_MASK      0xffff
 214 
 215 #define MT_ST_OPTIONS           0xf0000000
 216 #define MT_ST_BOOLEANS          0x10000000
 217 #define MT_ST_WRITE_THRESHOLD   0x20000000
 218 #define MT_ST_BUFFER_WRITES     0x1
 219 #define MT_ST_ASYNC_WRITES      0x2
 220 #define MT_ST_READ_AHEAD        0x4
 221 #define MT_ST_DEBUGGING         0x8
 222 #define MT_ST_TWO_FM            0x10
 223 #define MT_ST_FAST_MTEOM        0x20
 224 
 225 #endif /* _LINUX_MTIO_H */

/* [previous][next][first][last][top][bottom][index][help] */