| tag | line | file | source code |
|---|
| D | 168 | drivers/scsi/constants.c | {0x40,0x00,0x7f,D,"Ram failure (%x)"}, |
| D | 169 | drivers/scsi/constants.c | {0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"}, |
| D | 170 | drivers/scsi/constants.c | {0x41,0x00,0xff,D,"Data path failure (%x)"}, |
| D | 171 | drivers/scsi/constants.c | {0x42,0x00,0xff,D,"Power-on or self-test failure (%x)"}, |
| D | 182 | drivers/scsi/constants.c | {0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"}, |
| D | 188 | drivers/scsi/constants.c | {0x01,0x00,D|W|O,"No index/sector signal"}, |
| D | 189 | drivers/scsi/constants.c | {0x02,0x00,D|W|R|O|M,"No seek complete"}, |
| D | 190 | drivers/scsi/constants.c | {0x03,0x00,D|T|L|W|S|O,"Peripheral device write fault"}, |
| D | 193 | drivers/scsi/constants.c | {0x04,0x00,D|T|L|P|W|R|S|O|M|C, |
| D | 195 | drivers/scsi/constants.c | {0x04,0x01,D|T|L|P|W|R|S|O|M|C, |
| D | 197 | drivers/scsi/constants.c | {0x04,0x02,D|T|L|P|W|R|S|O|M|C, |
| D | 199 | drivers/scsi/constants.c | {0x04,0x03,D|T|L|P|W|R|S|O|M|C, |
| D | 201 | drivers/scsi/constants.c | {0x04,0x04,D|T|L|O,"Logical unit not ready, format in progress"}, |
| D | 202 | drivers/scsi/constants.c | {0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"}, |
| D | 203 | drivers/scsi/constants.c | {0x06,0x00,D|W|R|O|M,"No reference position found"}, |
| D | 204 | drivers/scsi/constants.c | {0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"}, |
| D | 205 | drivers/scsi/constants.c | {0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"}, |
| D | 206 | drivers/scsi/constants.c | {0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"}, |
| D | 207 | drivers/scsi/constants.c | {0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"}, |
| D | 208 | drivers/scsi/constants.c | {0x09,0x00,D|T|W|R|O,"Track following error"}, |
| D | 212 | drivers/scsi/constants.c | {0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"}, |
| D | 214 | drivers/scsi/constants.c | {0x0C,0x01,D|W|O,"Write error recovered with auto reallocation"}, |
| D | 215 | drivers/scsi/constants.c | {0x0C,0x02,D|W|O,"Write error - auto reallocation failed"}, |
| D | 216 | drivers/scsi/constants.c | {0x10,0x00,D|W|O,"Id crc or ecc error"}, |
| D | 217 | drivers/scsi/constants.c | {0x11,0x00,D|T|W|R|S|O,"Unrecovered read error"}, |
| D | 218 | drivers/scsi/constants.c | {0x11,0x01,D|T|W|S|O,"Read retries exhausted"}, |
| D | 219 | drivers/scsi/constants.c | {0x11,0x02,D|T|W|S|O,"Error too long to correct"}, |
| D | 220 | drivers/scsi/constants.c | {0x11,0x03,D|T|W|S|O,"Multiple read errors"}, |
| D | 221 | drivers/scsi/constants.c | {0x11,0x04,D|W|O,"Unrecovered read error - auto reallocate failed"}, |
| D | 227 | drivers/scsi/constants.c | {0x11,0x0A,D|T|O,"Miscorrected error"}, |
| D | 228 | drivers/scsi/constants.c | {0x11,0x0B,D|W|O,"Unrecovered read error - recommend reassignment"}, |
| D | 229 | drivers/scsi/constants.c | {0x11,0x0C,D|W|O,"Unrecovered read error - recommend rewrite the data"}, |
| D | 230 | drivers/scsi/constants.c | {0x12,0x00,D|W|O,"Address mark not found for id field"}, |
| D | 231 | drivers/scsi/constants.c | {0x13,0x00,D|W|O,"Address mark not found for data field"}, |
| D | 232 | drivers/scsi/constants.c | {0x14,0x00,D|T|L|W|R|S|O,"Recorded entity not found"}, |
| D | 233 | drivers/scsi/constants.c | {0x14,0x01,D|T|W|R|O,"Record not found"}, |
| D | 237 | drivers/scsi/constants.c | {0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"}, |
| D | 238 | drivers/scsi/constants.c | {0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"}, |
| D | 239 | drivers/scsi/constants.c | {0x15,0x02,D|T|W|R|O,"Positioning error detected by read of medium"}, |
| D | 240 | drivers/scsi/constants.c | {0x16,0x00,D|W|O,"Data synchronization mark error"}, |
| D | 241 | drivers/scsi/constants.c | {0x17,0x00,D|T|W|R|S|O,"Recovered data with no error correction applied"}, |
| D | 242 | drivers/scsi/constants.c | {0x17,0x01,D|T|W|R|S|O,"Recovered data with retries"}, |
| D | 243 | drivers/scsi/constants.c | {0x17,0x02,D|T|W|R|O,"Recovered data with positive head offset"}, |
| D | 244 | drivers/scsi/constants.c | {0x17,0x03,D|T|W|R|O,"Recovered data with negative head offset"}, |
| D | 246 | drivers/scsi/constants.c | {0x17,0x05,D|W|R|O,"Recovered data using previous sector id"}, |
| D | 247 | drivers/scsi/constants.c | {0x17,0x06,D|W|O,"Recovered data without ecc - data auto-reallocated"}, |
| D | 248 | drivers/scsi/constants.c | {0x17,0x07,D|W|O,"Recovered data without ecc - recommend reassignment"}, |
| D | 249 | drivers/scsi/constants.c | {0x18,0x00,D|T|W|R|O,"Recovered data with error correction applied"}, |
| D | 250 | drivers/scsi/constants.c | {0x18,0x01,D|W|R|O,"Recovered data with error correction and retries applied"}, |
| D | 251 | drivers/scsi/constants.c | {0x18,0x02,D|W|R|O,"Recovered data - data auto-reallocated"}, |
| D | 254 | drivers/scsi/constants.c | {0x18,0x05,D|W|R|O,"Recovered data - recommend reassignment"}, |
| D | 255 | drivers/scsi/constants.c | {0x19,0x00,D|O,"Defect list error"}, |
| D | 256 | drivers/scsi/constants.c | {0x19,0x01,D|O,"Defect list not available"}, |
| D | 257 | drivers/scsi/constants.c | {0x19,0x02,D|O,"Defect list error in primary list"}, |
| D | 258 | drivers/scsi/constants.c | {0x19,0x03,D|O,"Defect list error in grown list"}, |
| D | 259 | drivers/scsi/constants.c | {0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"}, |
| D | 260 | drivers/scsi/constants.c | {0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"}, |
| D | 261 | drivers/scsi/constants.c | {0x1C,0x00,D|O,"Defect list not found"}, |
| D | 262 | drivers/scsi/constants.c | {0x1C,0x01,D|O,"Primary defect list not found"}, |
| D | 263 | drivers/scsi/constants.c | {0x1C,0x02,D|O,"Grown defect list not found"}, |
| D | 264 | drivers/scsi/constants.c | {0x1D,0x00,D|W|O,"Miscompare during verify operation"}, |
| D | 265 | drivers/scsi/constants.c | {0x1E,0x00,D|W|O,"Recovered id with ecc correction"}, |
| D | 266 | drivers/scsi/constants.c | {0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"}, |
| D | 267 | drivers/scsi/constants.c | {0x21,0x00,D|T|W|R|O|M,"Logical block address out of range"}, |
| D | 269 | drivers/scsi/constants.c | {0x22,0x00,D,"Illegal function (should use 20 00, 24 00, or 26 00)"}, |
| D | 270 | drivers/scsi/constants.c | {0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"}, |
| D | 271 | drivers/scsi/constants.c | {0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"}, |
| D | 272 | drivers/scsi/constants.c | {0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"}, |
| D | 273 | drivers/scsi/constants.c | {0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"}, |
| D | 274 | drivers/scsi/constants.c | {0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"}, |
| D | 275 | drivers/scsi/constants.c | {0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"}, |
| D | 276 | drivers/scsi/constants.c | {0x27,0x00,D|T|W|O,"Write protected"}, |
| D | 277 | drivers/scsi/constants.c | {0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"}, |
| D | 279 | drivers/scsi/constants.c | {0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"}, |
| D | 280 | drivers/scsi/constants.c | {0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"}, |
| D | 281 | drivers/scsi/constants.c | {0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"}, |
| D | 282 | drivers/scsi/constants.c | {0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"}, |
| D | 283 | drivers/scsi/constants.c | {0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"}, |
| D | 284 | drivers/scsi/constants.c | {0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"}, |
| D | 288 | drivers/scsi/constants.c | {0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"}, |
| D | 289 | drivers/scsi/constants.c | {0x30,0x00,D|T|W|R|O|M,"Incompatible medium installed"}, |
| D | 290 | drivers/scsi/constants.c | {0x30,0x01,D|T|W|R|O,"Cannot read medium - unknown format"}, |
| D | 291 | drivers/scsi/constants.c | {0x30,0x02,D|T|W|R|O,"Cannot read medium - incompatible format"}, |
| D | 292 | drivers/scsi/constants.c | {0x30,0x03,D|T,"Cleaning cartridge installed"}, |
| D | 293 | drivers/scsi/constants.c | {0x31,0x00,D|T|W|O,"Medium format corrupted"}, |
| D | 294 | drivers/scsi/constants.c | {0x31,0x01,D|L|O,"Format command failed"}, |
| D | 295 | drivers/scsi/constants.c | {0x32,0x00,D|W|O,"No defect spare location available"}, |
| D | 296 | drivers/scsi/constants.c | {0x32,0x01,D|W|O,"Defect list update failure"}, |
| D | 299 | drivers/scsi/constants.c | {0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"}, |
| D | 300 | drivers/scsi/constants.c | {0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"}, |
| D | 301 | drivers/scsi/constants.c | {0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"}, |
| D | 317 | drivers/scsi/constants.c | {0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"}, |
| D | 318 | drivers/scsi/constants.c | {0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"}, |
| D | 319 | drivers/scsi/constants.c | {0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"}, |
| D | 320 | drivers/scsi/constants.c | {0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"}, |
| D | 321 | drivers/scsi/constants.c | {0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"}, |
| D | 322 | drivers/scsi/constants.c | {0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"}, |
| D | 323 | drivers/scsi/constants.c | {0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"}, |
| D | 324 | drivers/scsi/constants.c | {0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"}, |
| D | 325 | drivers/scsi/constants.c | {0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"}, |
| D | 326 | drivers/scsi/constants.c | {0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"}, |
| D | 327 | drivers/scsi/constants.c | {0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"}, |
| D | 328 | drivers/scsi/constants.c | {0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"}, |
| D | 329 | drivers/scsi/constants.c | {0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"}, |
| D | 330 | drivers/scsi/constants.c | {0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"}, |
| D | 331 | drivers/scsi/constants.c | {0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"}, |
| D | 332 | drivers/scsi/constants.c | {0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"}, |
| D | 333 | drivers/scsi/constants.c | {0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"}, |
| D | 339 | drivers/scsi/constants.c | {0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"}, |
| D | 341 | drivers/scsi/constants.c | {0x53,0x02,D|T|W|R|O|M,"Medium removal prevented"}, |
| D | 347 | drivers/scsi/constants.c | {0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"}, |
| D | 348 | drivers/scsi/constants.c | {0x5A,0x01,D|T|W|R|O|M,"Operator medium removal request"}, |
| D | 349 | drivers/scsi/constants.c | {0x5A,0x02,D|T|W|O,"Operator selected write protect"}, |
| D | 350 | drivers/scsi/constants.c | {0x5A,0x03,D|T|W|O,"Operator selected write permit"}, |
| D | 351 | drivers/scsi/constants.c | {0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"}, |
| D | 352 | drivers/scsi/constants.c | {0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"}, |
| D | 353 | drivers/scsi/constants.c | {0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"}, |
| D | 354 | drivers/scsi/constants.c | {0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"}, |
| D | 355 | drivers/scsi/constants.c | {0x5C,0x00,D|O,"Rpl status change"}, |
| D | 356 | drivers/scsi/constants.c | {0x5C,0x01,D|O,"Spindles synchronized"}, |
| D | 357 | drivers/scsi/constants.c | {0x5C,0x02,D|O,"Spindles not synchronized"}, |