| tag | line | file | source code |
|---|
| TPQD_ALWAYS | 429 | drivers/char/tpqic02.c | if ((flags & TPQD_ALWAYS) || (flags & QIC02_TAPE_DEBUG)) |
| TPQD_ALWAYS | 475 | drivers/char/tpqic02.c | if (n >= NR_OF_EXC) { tpqputs(TPQD_ALWAYS, "Oops -- report_exception"); n = 0; } |
| TPQD_ALWAYS | 542 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[Bad block -- filler data transferred.]"); |
| TPQD_ALWAYS | 554 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[CRC failed!]"); |
| TPQD_ALWAYS | 561 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[Marginal block]"); |
| TPQD_ALWAYS | 591 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[Bad block -- filler data transferred.]"); |
| TPQD_ALWAYS | 593 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[CRC failed!]"); |
| TPQD_ALWAYS | 598 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "[Marginal block]"); |
| TPQD_ALWAYS | 675 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "*** exception detected in notify_cmd"); |
| TPQD_ALWAYS | 680 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "exception persists after reset."); |
| TPQD_ALWAYS | 681 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, " ^ exception ignored."); |
| TPQD_ALWAYS | 694 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "timed out waiting for ready in notify_cmd"); |
| TPQD_ALWAYS | 705 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "timed out waiting for !ready in notify_cmd"); |
| TPQD_ALWAYS | 764 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "wait_for_ready() timed out"); |
| TPQD_ALWAYS | 769 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "exception detected after waiting_for_ready"); |
| TPQD_ALWAYS | 811 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "send_qic02_cmd: Exception!"); |
| TPQD_ALWAYS | 815 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "send_qic02_cmd: not Ready!"); |
| TPQD_ALWAYS | 834 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "send_qic02_cmd failed"); |
| TPQD_ALWAYS | 865 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "waiting looong in rdstatus() -- drive dead?"); |
| TPQD_ALWAYS | 868 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "finished waiting in rdstatus()"); |
| TPQD_ALWAYS | 885 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "rdstatus: exception error"); |
| TPQD_ALWAYS | 949 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Attempting to read Extended Status 3..."); |
| TPQD_ALWAYS | 954 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Returned status bytes:"); |
| TPQD_ALWAYS | 980 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Warning: File Mark inserted because of sense() request"); |
| TPQD_ALWAYS | 986 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "tp_sense: could not read tape drive status"); |
| TPQD_ALWAYS | 1064 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "(re-) winding failed\n"); |
| TPQD_ALWAYS | 1082 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Drive is dead. Do a `mt reset`."); |
| TPQD_ALWAYS | 1199 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "terminating pending read-cycle"); |
| TPQD_ALWAYS | 1208 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "finish_rw[read1]: ignore the 2 lines above"); |
| TPQD_ALWAYS | 1211 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "finish_rw[read2]: read cycle error"); |
| TPQD_ALWAYS | 1230 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Couldn't finish write cycle properly"); |
| TPQD_ALWAYS | 1246 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "error: drive not ready in finish_rw() !"); |
| TPQD_ALWAYS | 1448 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Cartridge is write-protected."); |
| TPQD_ALWAYS | 1471 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "RAS1 failed"); |
| TPQD_ALWAYS | 1484 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "RAS2 failed"); |
| TPQD_ALWAYS | 1616 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "wait_for_ready failed in start_dma"); |
| TPQD_ALWAYS | 1660 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "detected exception in start_dma() while transfer in progress"); |
| TPQD_ALWAYS | 1826 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "isr: exception on tape controller"); |
| TPQD_ALWAYS | 1846 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "isr: ? Tape controller not ready"); |
| TPQD_ALWAYS | 1927 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "configs not set"); |
| TPQD_ALWAYS | 2034 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "read: Oops, read more bytes than requested"); |
| TPQD_ALWAYS | 2059 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "read request for <0 bytes"); |
| TPQD_ALWAYS | 2101 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "configs not set"); |
| TPQD_ALWAYS | 2116 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Not in write mode"); |
| TPQD_ALWAYS | 2125 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Cartridge is write-protected."); |
| TPQD_ALWAYS | 2149 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "partial write"); |
| TPQD_ALWAYS | 2175 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write: start_dma() failed"); |
| TPQD_ALWAYS | 2187 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write: Oops, wrote more bytes than requested"); |
| TPQD_ALWAYS | 2204 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write: EW detected"); |
| TPQD_ALWAYS | 2208 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write: dma: error in writing"); |
| TPQD_ALWAYS | 2226 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "write request for <0 bytes"); |
| TPQD_ALWAYS | 2315 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "open: sense() failed"); |
| TPQD_ALWAYS | 2324 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "No tape present."); |
| TPQD_ALWAYS | 2352 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "open: rewind failed"); |
| TPQD_ALWAYS | 2362 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "open: tape dead, attempting reset"); |
| TPQD_ALWAYS | 2368 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "open: tp_sense() failed\n"); |
| TPQD_ALWAYS | 2446 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "release: device dead!?"); |
| TPQD_ALWAYS | 2486 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Unsupported or incorrect DMA channel"); |
| TPQD_ALWAYS | 2518 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Unsupported or incorrect DMA channel"); |
| TPQD_ALWAYS | 2538 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Unsupported or incorrect DMA channel"); |
| TPQD_ALWAYS | 2542 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Invalid interface type"); |
| TPQD_ALWAYS | 2606 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtconfiginfo) does not match!"); |
| TPQD_ALWAYS | 2630 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtconfiginfo) does not match!"); |
| TPQD_ALWAYS | 2656 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Configs not set"); |
| TPQD_ALWAYS | 2666 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtop) does not match!"); |
| TPQD_ALWAYS | 2691 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Warning: negative mt_count ignored"); |
| TPQD_ALWAYS | 2721 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtget) does not match!"); |
| TPQD_ALWAYS | 2749 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "sizeof(struct mtpos) does not match!"); |
| TPQD_ALWAYS | 2825 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "Bogus interrupt number."); |
| TPQD_ALWAYS | 2859 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "No drive detected -- releasing irq and dma."); |
| TPQD_ALWAYS | 2943 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "No drive detected -- driver going on vacation..."); |
| TPQD_ALWAYS | 2951 | drivers/char/tpqic02.c | tpqputs(TPQD_ALWAYS, "exception detected\n"); |