tag	line	file	source code
serial_inp	379	drivers/char/serial.c	ch = serial_inp(info, UART_RX);
serial_inp	403	drivers/char/serial.c	*status = serial_inp(info, UART_LSR) & info->read_status_mask;
serial_inp	534	drivers/char/serial.c	status = serial_inp(info, UART_LSR) & info->read_status_mask;
serial_inp	589	drivers/char/serial.c	status = serial_inp(info, UART_LSR) & info->read_status_mask;
serial_inp	648	drivers/char/serial.c	status = serial_inp(info, UART_LSR) & info->read_status_mask;
serial_inp	917	drivers/char/serial.c	if (serial_inp(info, UART_LSR) == 0xff) {
serial_inp	958	drivers/char/serial.c	(void) serial_inp(info, UART_RX);
serial_inp	959	drivers/char/serial.c	(void) serial_inp(info, UART_IIR);
serial_inp	960	drivers/char/serial.c	(void) serial_inp(info, UART_MSR);
serial_inp	997	drivers/char/serial.c	(void)serial_inp(info, UART_LSR);
serial_inp	998	drivers/char/serial.c	(void)serial_inp(info, UART_RX);
serial_inp	999	drivers/char/serial.c	(void)serial_inp(info, UART_IIR);
serial_inp	1000	drivers/char/serial.c	(void)serial_inp(info, UART_MSR);
serial_inp	1679	drivers/char/serial.c	serial_out(info, UART_LCR, serial_inp(info, UART_LCR) | UART_LCR_SBC);
serial_inp	1681	drivers/char/serial.c	serial_out(info, UART_LCR, serial_inp(info, UART_LCR) & ~UART_LCR_SBC);
serial_inp	2068	drivers/char/serial.c	while (!(serial_inp(info, UART_LSR) & UART_LSR_TEMT)) {
serial_inp	2211	drivers/char/serial.c	serial_inp(info, UART_MCR) |
serial_inp	2366	drivers/char/serial.c	save_IER = serial_inp(info, UART_IER);
serial_inp	2367	drivers/char/serial.c	save_MCR = serial_inp(info, UART_MCR);
serial_inp	2384	drivers/char/serial.c	(void)serial_inp(info, UART_LSR);
serial_inp	2385	drivers/char/serial.c	(void)serial_inp(info, UART_RX);
serial_inp	2386	drivers/char/serial.c	(void)serial_inp(info, UART_IIR);
serial_inp	2387	drivers/char/serial.c	(void)serial_inp(info, UART_MSR);
serial_inp	2471	drivers/char/serial.c	scratch = serial_inp(info, UART_IER);
serial_inp	2474	drivers/char/serial.c	scratch2 = serial_inp(info, UART_IER);
serial_inp	2491	drivers/char/serial.c	scratch = serial_inp(info, UART_MCR);
serial_inp	2493	drivers/char/serial.c	scratch2 = serial_inp(info, UART_MSR);
serial_inp	2495	drivers/char/serial.c	status1 = serial_inp(info, UART_MSR) & 0xF0;