tag	line	file	source code
S	169	drivers/scsi/constants.c	{0x40,0x80,0xff,D|T|L|P|W|R|S|O|M|C,"Diagnostic failure on component (%x)"},
S	178	drivers/scsi/constants.c	{0x00,0x02,T|S,"End-of-partition/medium detected"},
S	180	drivers/scsi/constants.c	{0x00,0x04,T|S,"Beginning-of-partition/medium detected"},
S	181	drivers/scsi/constants.c	{0x00,0x05,T|S,"End-of-data detected"},
S	182	drivers/scsi/constants.c	{0x00,0x06,D|T|L|P|W|R|S|O|M|C,"I/O process terminated"},
S	190	drivers/scsi/constants.c	{0x03,0x00,D|T|L|W|S|O,"Peripheral device write fault"},
S	193	drivers/scsi/constants.c	{0x04,0x00,D|T|L|P|W|R|S|O|M|C,
S	195	drivers/scsi/constants.c	{0x04,0x01,D|T|L|P|W|R|S|O|M|C,
S	197	drivers/scsi/constants.c	{0x04,0x02,D|T|L|P|W|R|S|O|M|C,
S	199	drivers/scsi/constants.c	{0x04,0x03,D|T|L|P|W|R|S|O|M|C,
S	202	drivers/scsi/constants.c	{0x05,0x00,D|T|L|W|R|S|O|M|C,"Logical unit does not respond to selection"},
S	204	drivers/scsi/constants.c	{0x07,0x00,D|T|L|W|R|S|O|M,"Multiple peripheral devices selected"},
S	205	drivers/scsi/constants.c	{0x08,0x00,D|T|L|W|R|S|O|M|C,"Logical unit communication failure"},
S	206	drivers/scsi/constants.c	{0x08,0x01,D|T|L|W|R|S|O|M|C,"Logical unit communication time-out"},
S	207	drivers/scsi/constants.c	{0x08,0x02,D|T|L|W|R|S|O|M|C,"Logical unit communication parity error"},
S	212	drivers/scsi/constants.c	{0x0A,0x00,D|T|L|P|W|R|S|O|M|C,"Error log overflow"},
S	213	drivers/scsi/constants.c	{0x0C,0x00,T|S,"Write error"},
S	217	drivers/scsi/constants.c	{0x11,0x00,D|T|W|R|S|O,"Unrecovered read error"},
S	218	drivers/scsi/constants.c	{0x11,0x01,D|T|W|S|O,"Read retries exhausted"},
S	219	drivers/scsi/constants.c	{0x11,0x02,D|T|W|S|O,"Error too long to correct"},
S	220	drivers/scsi/constants.c	{0x11,0x03,D|T|W|S|O,"Multiple read errors"},
S	232	drivers/scsi/constants.c	{0x14,0x00,D|T|L|W|R|S|O,"Recorded entity not found"},
S	237	drivers/scsi/constants.c	{0x15,0x00,D|T|L|W|R|S|O|M,"Random positioning error"},
S	238	drivers/scsi/constants.c	{0x15,0x01,D|T|L|W|R|S|O|M,"Mechanical positioning error"},
S	241	drivers/scsi/constants.c	{0x17,0x00,D|T|W|R|S|O,"Recovered data with no error correction applied"},
S	242	drivers/scsi/constants.c	{0x17,0x01,D|T|W|R|S|O,"Recovered data with retries"},
S	259	drivers/scsi/constants.c	{0x1A,0x00,D|T|L|P|W|R|S|O|M|C,"Parameter list length error"},
S	260	drivers/scsi/constants.c	{0x1B,0x00,D|T|L|P|W|R|S|O|M|C,"Synchronous data transfer error"},
S	266	drivers/scsi/constants.c	{0x20,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid command operation code"},
S	270	drivers/scsi/constants.c	{0x24,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in cdb"},
S	271	drivers/scsi/constants.c	{0x25,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit not supported"},
S	272	drivers/scsi/constants.c	{0x26,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid field in parameter list"},
S	273	drivers/scsi/constants.c	{0x26,0x01,D|T|L|P|W|R|S|O|M|C,"Parameter not supported"},
S	274	drivers/scsi/constants.c	{0x26,0x02,D|T|L|P|W|R|S|O|M|C,"Parameter value invalid"},
S	275	drivers/scsi/constants.c	{0x26,0x03,D|T|L|P|W|R|S|O|M|C,"Threshold parameters not supported"},
S	277	drivers/scsi/constants.c	{0x28,0x00,D|T|L|P|W|R|S|O|M|C,"Not ready to ready transition (medium may have changed)"},
S	279	drivers/scsi/constants.c	{0x29,0x00,D|T|L|P|W|R|S|O|M|C,"Power on, reset, or bus device reset occurred"},
S	280	drivers/scsi/constants.c	{0x2A,0x00,D|T|L|W|R|S|O|M|C,"Parameters changed"},
S	281	drivers/scsi/constants.c	{0x2A,0x01,D|T|L|W|R|S|O|M|C,"Mode parameters changed"},
S	282	drivers/scsi/constants.c	{0x2A,0x02,D|T|L|W|R|S|O|M|C,"Log parameters changed"},
S	283	drivers/scsi/constants.c	{0x2B,0x00,D|T|L|P|W|R|S|O|C,"Copy cannot execute since host cannot disconnect"},
S	284	drivers/scsi/constants.c	{0x2C,0x00,D|T|L|P|W|R|S|O|M|C,"Command sequence error"},
S	285	drivers/scsi/constants.c	{0x2C,0x01,S,"Too many windows specified"},
S	286	drivers/scsi/constants.c	{0x2C,0x02,S,"Invalid combination of windows specified"},
S	288	drivers/scsi/constants.c	{0x2F,0x00,D|T|L|P|W|R|S|O|M|C,"Commands cleared by another initiator"},
S	299	drivers/scsi/constants.c	{0x37,0x00,D|T|L|W|R|S|O|M|C,"Rounded parameter"},
S	300	drivers/scsi/constants.c	{0x39,0x00,D|T|L|W|R|S|O|M|C,"Saving parameters not supported"},
S	301	drivers/scsi/constants.c	{0x3A,0x00,D|T|L|W|R|S|O|M,"Medium not present"},
S	311	drivers/scsi/constants.c	{0x3B,0x09,S,"Read past end of medium"},
S	312	drivers/scsi/constants.c	{0x3B,0x0A,S,"Read past beginning of medium"},
S	313	drivers/scsi/constants.c	{0x3B,0x0B,S,"Position past end of medium"},
S	314	drivers/scsi/constants.c	{0x3B,0x0C,S,"Position past beginning of medium"},
S	317	drivers/scsi/constants.c	{0x3D,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid bits in identify message"},
S	318	drivers/scsi/constants.c	{0x3E,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit has not self-configured yet"},
S	319	drivers/scsi/constants.c	{0x3F,0x00,D|T|L|P|W|R|S|O|M|C,"Target operating conditions have changed"},
S	320	drivers/scsi/constants.c	{0x3F,0x01,D|T|L|P|W|R|S|O|M|C,"Microcode has been changed"},
S	321	drivers/scsi/constants.c	{0x3F,0x02,D|T|L|P|W|R|S|O|M|C,"Changed operating definition"},
S	322	drivers/scsi/constants.c	{0x3F,0x03,D|T|L|P|W|R|S|O|M|C,"Inquiry data has changed"},
S	323	drivers/scsi/constants.c	{0x43,0x00,D|T|L|P|W|R|S|O|M|C,"Message error"},
S	324	drivers/scsi/constants.c	{0x44,0x00,D|T|L|P|W|R|S|O|M|C,"Internal target failure"},
S	325	drivers/scsi/constants.c	{0x45,0x00,D|T|L|P|W|R|S|O|M|C,"Select or reselect failure"},
S	326	drivers/scsi/constants.c	{0x46,0x00,D|T|L|P|W|R|S|O|M|C,"Unsuccessful soft reset"},
S	327	drivers/scsi/constants.c	{0x47,0x00,D|T|L|P|W|R|S|O|M|C,"Scsi parity error"},
S	328	drivers/scsi/constants.c	{0x48,0x00,D|T|L|P|W|R|S|O|M|C,"Initiator detected error message received"},
S	329	drivers/scsi/constants.c	{0x49,0x00,D|T|L|P|W|R|S|O|M|C,"Invalid message error"},
S	330	drivers/scsi/constants.c	{0x4A,0x00,D|T|L|P|W|R|S|O|M|C,"Command phase error"},
S	331	drivers/scsi/constants.c	{0x4B,0x00,D|T|L|P|W|R|S|O|M|C,"Data phase error"},
S	332	drivers/scsi/constants.c	{0x4C,0x00,D|T|L|P|W|R|S|O|M|C,"Logical unit failed self-configuration"},
S	333	drivers/scsi/constants.c	{0x4E,0x00,D|T|L|P|W|R|S|O|M|C,"Overlapped commands attempted"},
S	339	drivers/scsi/constants.c	{0x53,0x00,D|T|L|W|R|S|O|M,"Media load or eject failed"},
S	347	drivers/scsi/constants.c	{0x5A,0x00,D|T|L|P|W|R|S|O|M,"Operator request or state change input (unspecified)"},
S	351	drivers/scsi/constants.c	{0x5B,0x00,D|T|L|P|W|R|S|O|M,"Log exception"},
S	352	drivers/scsi/constants.c	{0x5B,0x01,D|T|L|P|W|R|S|O|M,"Threshold condition met"},
S	353	drivers/scsi/constants.c	{0x5B,0x02,D|T|L|P|W|R|S|O|M,"Log counter at maximum"},
S	354	drivers/scsi/constants.c	{0x5B,0x03,D|T|L|P|W|R|S|O|M,"Log list codes exhausted"},
S	358	drivers/scsi/constants.c	{0x60,0x00,S,"Lamp failure"},
S	359	drivers/scsi/constants.c	{0x61,0x00,S,"Video acquisition error"},
S	360	drivers/scsi/constants.c	{0x61,0x01,S,"Unable to acquire video"},
S	361	drivers/scsi/constants.c	{0x61,0x02,S,"Out of focus"},
S	362	drivers/scsi/constants.c	{0x62,0x00,S,"Scan head positioning error"},
S	88	include/linux/net.h	#define SOCK_INODE(S)  ((S)->inode)
S	145	net/ax25/ax25_subr.c	if ((frame[0] & S) == 0) {
S	160	net/ax25/ax25_subr.c	if ((frame[0] & S) == 0) {
S	210	net/ax25/ax25_subr.c	if ((frametype & U) == S)    /* S frames carry NR */