root/drivers/scsi/53c7,8xx.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. internal_setup
  2. setup_wrapper
  3. normal_init
  4. ncr_pci_init
  5. NCR53c7xx_detect
  6. NCR53c8x0_init_fixup
  7. NCR53c8xx_run_tests
  8. NCR53c8xx_dsa_fixup
  9. abnormal_finished
  10. intr_break
  11. asynchronous
  12. synchronous
  13. NCR53c8x0_dstat_sir_intr
  14. debugger_fn_bc
  15. debugger_fn_bl
  16. debugger_fn_bs
  17. debugger_user_write
  18. debugger_user_read
  19. debugger_kernel_write
  20. NCR53c8x0_soft_reset
  21. create_cmd
  22. NCR53c7xx_queue_command
  23. fix_pointers
  24. intr_scsi
  25. NCR53c7x0_intr
  26. abort_connected
  27. intr_phase_mismatch
  28. intr_dma
  29. print_insn
  30. NCR53c7xx_abort
  31. NCR53c7xx_reset
  32. print_dsa
  33. shutdown
  34. ncr_halt
  35. NCR53c7x0_release

   1 /* 
   2  * Set these options for all host adapters.
   3  *      - Memory mapped IO does not work on x86 because of cache
   4  *        problems.
   5  *      - Test 1 does a bus mastering test, which will help
   6  *        weed out brain damaged main boards.
   7  */
   8 
   9 
  10 #define PERM_OPTIONS (OPTION_IO_MAPPED|OPTION_DEBUG_TEST1)
  11 
  12 /*
  13  * Define SCSI_MALLOC to use scsi_malloc instead of kmalloc.  Other than
  14  * preventing deadlock, I'm not sure why we'd want to do this.
  15  */
  16 
  17 #define SCSI_MALLOC
  18 
  19 /*
  20  * Sponsored by 
  21  *      iX Multiuser Multitasking Magazine
  22  *      Hannover, Germany
  23  *      hm@ix.de
  24  *
  25  * Copyright 1993, 1994, 1995 Drew Eckhardt
  26  *      Visionary Computing 
  27  *      (Unix and Linux consulting and custom programming)
  28  *      drew@Colorado.EDU
  29  *      +1 (303) 786-7975
  30  *
  31  * TolerANT and SCSI SCRIPTS are registered trademarks of NCR Corporation.
  32  * 
  33  * For more information, please consult 
  34  *
  35  *
  36  * NCR 53C700/53C700-66
  37  * SCSI I/O Processor
  38  * Data Manual
  39  *
  40  * NCR53C710 
  41  * SCSI I/O Processor
  42  * Programmer's Guide
  43  *
  44  * NCR 53C810
  45  * PCI-SCSI I/O Processor
  46  * Data Manual
  47  *
  48  * NCR 53C810/53C820
  49  * PCI-SCSI I/O Processor Design In Guide
  50  *
  51  * NCR Microelectronics
  52  * 1635 Aeroplaza Drive
  53  * Colorado Springs, CO 80916
  54  * +1 (719) 578-3400
  55  *
  56  * Toll free literature number
  57  * +1 (800) 334-5454
  58  *
  59  * PCI BIOS Specification Revision
  60  * PCI Local Bus Specification
  61  * PCI System Design Guide
  62  *
  63  * PCI Special Interest Group
  64  * M/S HF3-15A
  65  * 5200 N.E. Elam Young Parkway
  66  * Hillsboro, Oregon 97124-6497
  67  * +1 (503) 696-2000 
  68  * +1 (800) 433-5177
  69  */
  70 
  71 /*
  72  * Design issues : 
  73  * The cumulative latency needed to propagate a read/write request 
  74  * through the filesystem, buffer cache, driver stacks, SCSI host, and 
  75  * SCSI device is ultimately the limiting factor in throughput once we 
  76  * have a sufficiently fast host adapter.
  77  *  
  78  * So, to maximize performance we want to keep the ratio of latency to data 
  79  * transfer time to a minimum by
  80  * 1.  Minimizing the total number of commands sent (typical command latency
  81  *      including drive and busmastering host overhead is as high as 4.5ms)
  82  *      to transfer a given amount of data.  
  83  *
  84  *      This is accomplished by placing no arbitrary limit on the number
  85  *      of scatter/gather buffers supported, since we can transfer 1K
  86  *      per scatter/gather buffer without Eric's cluster patches, 
  87  *      4K with.  
  88  *
  89  * 2.  Minimizing the number of fatal interrupts serviced, since
  90  *      fatal interrupts halt the SCSI I/O processor.  Basically,
  91  *      this means offloading the practical maximum amount of processing 
  92  *      to the SCSI chip.
  93  * 
  94  *      On the NCR53c810/820,  this is accomplished by using 
  95  *              interrupt-on-the-fly signals with the DSA address as a 
  96  *              parameter when commands complete, and only handling fatal 
  97  *              errors and SDTR / WDTR  messages in the host code.
  98  *
  99  *      On the NCR53c710/720, interrupts are generated as on the NCR53c8x0,
 100  *              only the lack of a interrupt-on-the-fly facility complicates
 101  *              things.  
 102  *              
 103  *      On the NCR53c700 and NCR53c700-66, operations that were done via 
 104  *              indirect, table mode on the more advanced chips have
 105  *              been replaced by calls through a jump table which 
 106  *              acts as a surrogate for the DSA.  Unfortunately, this 
 107  *              means that we must service an interrupt for each 
 108  *              disconnect/reconnect.
 109  * 
 110  * 3.  Eliminating latency by pipelining operations at the different levels.
 111  *      
 112  *      This driver allows a configurable number of commands to be enqueued
 113  *      for each target/lun combination (experimentally, I have discovered
 114  *      that two seems to work best) and will ultimately allow for 
 115  *      SCSI-II tagged queueing.
 116  *      
 117  *
 118  * Architecture : 
 119  * This driver is built around two queues of commands waiting to 
 120  * be executed - the Linux issue queue, and the shared Linux/NCR  
 121  * queue which are manipulated by the NCR53c7xx_queue_command and 
 122  * NCR53c7x0_intr routines.
 123  *
 124  * When the higher level routines pass a SCSI request down to 
 125  * NCR53c7xx_queue_command, it looks to see if that target/lun 
 126  * is currently busy. If not, the command is inserted into the 
 127  * shared Linux/NCR queue, otherwise it is inserted into the Linux 
 128  * queue.
 129  *
 130  * As commands are completed, the interrupt routine is triggered,
 131  * looks for commands in the linked list of completed commands with
 132  * valid status, removes these commands from the list, calls 
 133  * the done routine, and flags their target/luns as not busy.
 134  *
 135  * Due to limitations in the intelligence of the NCR chips, certain
 136  * concessions are made.  In many cases, it is easier to dynamically 
 137  * generate/fixup code rather than calculate on the NCR at run time.  
 138  * So, code is generated or fixed up for
 139  *
 140  * - Handling data transfers, using a variable number of MOVE instructions
 141  *      interspersed with CALL MSG_IN, WHEN MSGIN instructions.
 142  *
 143  *      The DATAIN and DATAOUT routines are separate, so that an incorrect
 144  *      direction can be trapped, and space isn't wasted. 
 145  *
 146  *      It may turn out that we're better off using some sort 
 147  *      of table indirect instruction in a loop with a variable
 148  *      sized table on the NCR53c710 and newer chips.
 149  *
 150  * - Checking for reselection (NCR53c710 and better)
 151  *
 152  * - Handling the details of SCSI context switches (NCR53c710 and better),
 153  *      such as reprogramming appropriate synchronous parameters, 
 154  *      removing the dsa structure from the NCR's queue of outstanding
 155  *      commands, etc.
 156  *
 157  */
 158 
 159 #ifdef MODULE
 160 #include <linux/module.h>
 161 #endif
 162 
 163 #include <asm/dma.h>
 164 #include <asm/io.h>
 165 #include <asm/system.h>
 166 #include <linux/delay.h>
 167 #include <linux/signal.h>
 168 #include <linux/sched.h>
 169 #include <linux/errno.h>
 170 #include <linux/bios32.h>
 171 #include <linux/pci.h>
 172 #include <linux/proc_fs.h>
 173 #include <linux/string.h>
 174 #include <linux/mm.h>
 175 #include "../block/blk.h"
 176 #include "scsi.h"
 177 #include "hosts.h"
 178 #include "53c7,8xx.h"
 179 #include "constants.h"
 180 #include "sd.h"
 181 #include<linux/stat.h>
 182 
 183 struct proc_dir_entry proc_scsi_ncr53c7xx = {
 184     PROC_SCSI_NCR53C7xx, 9, "ncr53c7xx",
 185     S_IFDIR | S_IRUGO | S_IXUGO, 2
 186 };
 187 
 188 static void abnormal_finished (struct NCR53c7x0_cmd *cmd, int result);
 189 static int NCR53c8xx_run_tests (struct Scsi_Host *host);
 190 static int NCR53c8xx_script_len;
 191 static int NCR53c8xx_dsa_len;
 192 static void NCR53c7x0_intr(int irq, struct pt_regs * regs);
 193 static int ncr_halt (struct Scsi_Host *host);
 194 static void intr_phase_mismatch (struct Scsi_Host *host, struct NCR53c7x0_cmd 
 195     *cmd);
 196 static void intr_dma (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd);
 197 static void print_dsa (struct Scsi_Host *host, u32 *dsa);
 198 static int print_insn (struct Scsi_Host *host, u32 *insn,
 199     const char *prefix, int kernel);
 200 
 201 static void NCR53c8xx_dsa_fixup (struct NCR53c7x0_cmd *cmd);
 202 static void NCR53c8x0_init_fixup (struct Scsi_Host *host);
 203 static int NCR53c8x0_dstat_sir_intr (struct Scsi_Host *host, struct 
 204     NCR53c7x0_cmd *cmd);
 205 static void NCR53c8x0_soft_reset (struct Scsi_Host *host);
 206 
 207 static int perm_options = PERM_OPTIONS;
 208 
 209 static struct Scsi_Host *first_host = NULL;     /* Head of list of NCR boards */
 210 static Scsi_Host_Template *the_template = NULL; 
 211 
 212 
 213 /*
 214  * TODO : 
 215  *
 216  * 1.  Implement single step / trace code?
 217  * 
 218  * 2.  The initial code has been tested on the NCR53c810.  I don't 
 219  *     have access to NCR53c700, 700-66 (Forex boards), NCR53c710
 220  *     (NCR Pentium systems), NCR53c720, or NCR53c820 boards to finish
 221  *     development on those platforms.
 222  *
 223  *     NCR53c820/720 - need to add wide transfer support, including WDTR 
 224  *              negotiation, programming of wide transfer capabilities
 225  *              on reselection and table indirect selection.
 226  *
 227  *     NCR53c720/710 - need to add fatal interrupt or GEN code for 
 228  *              command completion signaling.   Need to take care of 
 229  *              ADD WITH CARRY instructions since carry is unimplemented.
 230  *              Also need to modify all SDID, SCID, etc. registers,
 231  *              and table indirect select code since these use bit
 232  *              fielded (ie 1<<target) instead of binary encoded
 233  *              target ids.  Also, SCNTL3 is _not_ automatically
 234  *              programmed on selection, so we need to add more code.
 235  * 
 236  *     NCR53c700/700-66 - need to add code to refix addresses on 
 237  *              every nexus change, eliminate all table indirect code.
 238  *
 239  * 3.  The NCR53c7x0 series is very popular on other platforms that 
 240  *     could be running Linux - ie, some high performance AMIGA SCSI 
 241  *     boards use it.  
 242  *      
 243  *     So, I should include #ifdef'd code so that it is 
 244  *     compatible with these systems.
 245  *      
 246  *     Specifically, the little Endian assumptions I made in my 
 247  *     bit fields need to change, and if the NCR doesn't see memory
 248  *     the right way, we need to provide options to reverse words
 249  *     when the scripts are relocated.
 250  *
 251  * 4.  Implement code to include page table entries for the 
 252  *     area occupied by memory mapped boards so we don't have 
 253  *     to use the potentially slower I/O accesses.
 254  */
 255 
 256 /* 
 257  * XXX - note that my assembler was modified so that internally,
 258  * the names used can take a prefix, so that there is no conflict
 259  * between multiple copies of the same script assembled with 
 260  * different defines.
 261  *
 262  *
 263  * Allow for simultaneous existence of multiple SCSI scripts so we 
 264  * can have a single driver binary for all of the family.
 265  *
 266  * - one for NCR53c700 and NCR53c700-66 chips   (not yet supported)
 267  * - one for NCR53c710 and NCR53c720 chips      (not yet supported)
 268  * - one for NCR53c810 and NCR53c820 chips      (only the NCR53c810 is
 269  *      currently supported)
 270  *
 271  * For the very similar chips, we should probably hack the fixup code
 272  * and interrupt code so that it works everywhere, but I suspect the 
 273  * NCR53c700 is going to need it's own fixup routine.
 274  */
 275 
 276 /*
 277  * Use to translate between device IDs of various types.
 278  */
 279 
 280 struct pci_chip {
 281     unsigned short pci_device_id;
 282     int chip;
 283     int min_revision;
 284     int max_revision;
 285 };
 286 
 287 static struct pci_chip pci_chip_ids[] = { 
 288     {PCI_DEVICE_ID_NCR_53C810, 810, 1, 1}, 
 289     {PCI_DEVICE_ID_NCR_53C815, 815, 2, 3},
 290     {PCI_DEVICE_ID_NCR_53C820, 820, -1, -1},
 291     {PCI_DEVICE_ID_NCR_53C825, 825, -1, -1}
 292 };
 293 
 294 #define NPCI_CHIP_IDS (sizeof (pci_chip_ids) / sizeof(pci_chip_ids[0]))
 295 
 296 
 297 /* Forced detection and autoprobe code for various hardware */
 298 
 299 static struct override {
 300     int chip;   /* 700, 70066, 710, 720, 810, 820 */
 301     int board;  /* Any special board level gunk */
 302     unsigned pci:1;
 303     union {
 304         struct {
 305             int base;   /* Memory address - indicates memory mapped regs */
 306             int io_port;/* I/O port address - indicates I/O mapped regs */
 307             int irq;    /* IRQ line */          
 308             int dma;    /* DMA channel          - often none */
 309         } normal;
 310         struct {
 311             int bus;
 312             int device;
 313             int function;
 314         } pci;
 315     } data;
 316     int options;
 317 } overrides [4] = {{0,},};
 318 static int commandline_current = 0;
 319 static int no_overrides = 0;
 320 
 321 #if 0
 322 #define OVERRIDE_LIMIT (sizeof(overrides) / sizeof(struct override))
 323 #else
 324 #define OVERRIDE_LIMIT commandline_current
 325 #endif
 326 
 327 /*
 328  * Function : static internal_setup(int board, int chip, char *str, int *ints)
 329  *
 330  * Purpose : LILO command line initialization of the overrides array,
 331  * 
 332  * Inputs : board - currently, unsupported.  chip - 700, 70066, 710, 720
 333  *      810, 815, 820, 825, although currently only the NCR53c810 is 
 334  *      supported.
 335  * 
 336  */
 337 
 338 static void internal_setup(int board, int chip, char *str, int *ints) {
     /* [previous][next][first][last][top][bottom][index][help] */
 339     unsigned char pci;          /* Specifies a PCI override, with bus, device,
 340                                    function */
 341 
 342     pci = (str && !strcmp (str, "pci")) ? 1 : 0;
 343     
 344 /*
 345  * Override syntaxes are as follows : 
 346  * ncr53c700,ncr53c700-66,ncr53c710,ncr53c720=mem,io,irq,dma
 347  * ncr53c810,ncr53c820,ncr53c825=mem,io,irq or pci,bus,device,function
 348  */
 349 
 350     if (commandline_current < OVERRIDE_LIMIT) {
 351         overrides[commandline_current].pci = pci ? 1 : 0;
 352         if (!pci) {
 353             overrides[commandline_current].data.normal.base = ints[1];
 354             overrides[commandline_current].data.normal.io_port = ints[2];
 355             overrides[commandline_current].data.normal.irq = ints[3];
 356             overrides[commandline_current].data.normal.dma = (ints[0] >= 4) ?
 357                 ints[4] : DMA_NONE;
 358             overrides[commandline_current].options = (ints[0] >= 5) ?
 359                 ints[5] : 0;
 360         } else {
 361             overrides[commandline_current].data.pci.bus = ints[1];
 362             overrides[commandline_current].data.pci.device = ints[2];
 363             overrides[commandline_current].data.pci.function = ints[3];
 364             overrides[commandline_current].options = (ints[0] >= 4) ?
 365                 ints[4] : 0;
 366         }
 367         overrides[commandline_current].board = board;
 368         overrides[commandline_current].chip = chip;
 369         ++commandline_current;
 370         ++no_overrides;
 371     } else {
 372         printk ("53c7,7x0.c:internal_setup() : too many overrides\n");
 373     }
 374 }
 375 
 376 /*
 377  * XXX - we might want to implement a single override function
 378  *       with a chip type field, revamp the command line configuration,
 379  *       etc.
 380  */
 381 
 382 #define setup_wrapper(x)                                \
 383 void ncr53c##x##_setup (char *str, int *ints) {         \
 384     internal_setup (BOARD_GENERIC, x, str, ints);       \
 385 }
 386 
 387 setup_wrapper(700)
     /* [previous][next][first][last][top][bottom][index][help] */
 388 setup_wrapper(70066)
 389 setup_wrapper(710)
 390 setup_wrapper(720)
 391 setup_wrapper(810)
 392 setup_wrapper(815)
 393 setup_wrapper(820)
 394 setup_wrapper(825)
 395 
 396 /* 
 397  * Function : static int NCR53c7x0_init (struct Scsi_Host *host)
 398  *
 399  * Purpose :  initialize the internal structures for a given SCSI host
 400  *
 401  * Inputs : host - pointer to this host adapter's structure/ 
 402  *
 403  * Preconditions : when this function is called, the chip_type 
 404  *      field of the hostdata structure MUST have been set.
 405  */
 406 
 407 static int 
 408 NCR53c7x0_init (struct Scsi_Host *host) {
 409     NCR53c7x0_local_declare();
 410     /* unsigned char tmp; */
 411     int i, j, ccf;
 412     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
 413         host->hostdata;
 414     struct Scsi_Host *search;
 415     NCR53c7x0_local_setup(host);
 416 
 417     switch (hostdata->chip) {
 418     case 810:
 419     case 815:
 420     case 820:
 421     case 825:
 422         hostdata->dstat_sir_intr = NCR53c8x0_dstat_sir_intr;
 423         hostdata->init_save_regs = NULL;
 424         hostdata->dsa_fixup = NCR53c8xx_dsa_fixup;
 425         hostdata->init_fixup = NCR53c8x0_init_fixup;
 426         hostdata->soft_reset = NCR53c8x0_soft_reset;
 427         hostdata->run_tests = NCR53c8xx_run_tests;
 428 /* Is the SCSI clock ever anything else on these chips? */
 429         hostdata->scsi_clock = 40000000;
 430         break;
 431     default:
 432         printk ("scsi%d : chip type of %d is not supported yet, detaching.\n",
 433             host->host_no, hostdata->chip);
 434         scsi_unregister (host);
 435         return -1;
 436     }
 437 
 438     /* Assign constants accessed by NCR */
 439     hostdata->NCR53c7xx_zero = 0;                       
 440     hostdata->NCR53c7xx_msg_reject = MESSAGE_REJECT;
 441     hostdata->NCR53c7xx_msg_abort = ABORT;
 442     hostdata->NCR53c7xx_msg_nop = NOP;
 443 
 444     /*
 445      * Set up an interrupt handler if we aren't already sharing an IRQ
 446      * with another board.
 447      */
 448 
 449     for (search = first_host; search && ((search->hostt != the_template) ||
 450         (search->irq != host->irq)); search=search->next);
 451 
 452     if (!search) {
 453         if (request_irq(host->irq, NCR53c7x0_intr, SA_INTERRUPT, "53c7,8xx")) {
 454             printk("scsi%d : IRQ%d not free, detaching\n", 
 455                 host->host_no, host->irq);
 456             scsi_unregister (host);
 457             return -1;
 458         } 
 459     } else {
 460         printk("scsi%d : using interrupt handler previously installed for scsi%d\n",
 461             host->host_no, search->host_no);
 462     }
 463 
 464     printk ("scsi%d : using %s mapped access\n", host->host_no, 
 465         (hostdata->options & OPTION_MEMORY_MAPPED) ? "memory" : 
 466          "io");
 467 
 468     hostdata->dmode = (hostdata->chip == 700 || hostdata->chip == 70066) ? 
 469         DMODE_REG_00 : DMODE_REG_10;
 470     hostdata->istat = ((hostdata->chip / 100) == 8) ? 
 471         ISTAT_REG_800 : ISTAT_REG_700;
 472 
 473 /* Only the ISTAT register is readable when the NCR is running, so make 
 474    sure it's halted. */
 475     ncr_halt(host);
 476 
 477 /* 
 478  * XXX - the NCR53c700 uses bitfielded registers for SCID, SDID, etc,
 479  *      as does the 710 with one bit per SCSI ID.  Conversely, the NCR
 480  *      uses a normal, 3 bit binary representation of these values.
 481  *
 482  * Get the rest of the NCR documentation, and FIND OUT where the change
 483  * was.
 484  */
 485 #if 0
 486     tmp = hostdata->this_id_mask = NCR53c7x0_read8(SCID_REG);
 487     for (host->this_id = 0; tmp != 1; tmp >>=1, ++host->this_id);
 488 #else
 489     host->this_id = NCR53c7x0_read8(SCID_REG) & 7;
 490     hostdata->this_id_mask = 1 << host->this_id;
 491 #endif
 492 
 493     printk("scsi%d : using initiator ID %d\n", host->host_no,
 494         host->this_id);
 495 
 496     /*
 497      * Save important registers to allow a soft reset.
 498      */
 499 
 500     if ((hostdata->chip / 100) == 8) {
 501     /* 
 502      * CTEST4 controls burst mode disable.
 503      */
 504         hostdata->saved_ctest4 = NCR53c7x0_read8(CTEST4_REG_800) & 
 505             CTEST4_800_SAVE;
 506     } else {
 507     /*
 508      * CTEST7 controls cache snooping, burst mode, and support for 
 509      * external differential drivers.
 510      */
 511         hostdata->saved_ctest7 = NCR53c7x0_read8(CTEST7_REG) & CTEST7_SAVE;
 512     }
 513 
 514     /*
 515      * On NCR53c700 series chips, DCNTL controls the SCSI clock divisor,
 516      * on 800 series chips, it allows for a totem-pole IRQ driver.
 517      */
 518     hostdata->saved_dcntl = NCR53c7x0_read8(DCNTL_REG);
 519     
 520     if ((hostdata->chip / 100) == 8)
 521         printk ("scsi%d : using %s interrupts\n", host->host_no,
 522             (hostdata->saved_dcntl & DCNTL_800_IRQM) ? "edge triggered" :
 523             "level active");
 524 
 525     /*
 526      * DMODE controls DMA burst length, and on 700 series chips,
 527      * 286 mode and bus width  
 528      */
 529     hostdata->saved_dmode = NCR53c7x0_read8(hostdata->dmode);
 530 
 531     /* 
 532      * Now that burst length and enabled/disabled status is known, 
 533      * clue the user in on it.
 534      */
 535    
 536     if ((hostdata->chip / 100) == 8) {
 537         if (hostdata->saved_ctest4 & CTEST4_800_BDIS) {
 538             printk ("scsi%d : burst mode disabled\n", host->host_no);
 539         } else {
 540             switch (hostdata->saved_dmode & DMODE_BL_MASK) {
 541             case DMODE_BL_2: i = 2; break;
 542             case DMODE_BL_4: i = 4; break;
 543             case DMODE_BL_8: i = 8; break;
 544             case DMODE_BL_16: i = 16; break;
 545              default: i = 0;
 546             }
 547             printk ("scsi%d : burst length %d\n", host->host_no, i);
 548         }
 549     }
 550 
 551     /*
 552      * On NCR53c810 and NCR53c820 chips, SCNTL3 contails the synchronous
 553      * and normal clock conversion factors.
 554      */
 555     if (hostdata->chip / 100 == 8)  {
 556         hostdata->saved_scntl3 = NCR53c7x0_read8(SCNTL3_REG_800);
 557         ccf = hostdata->saved_scntl3 & SCNTL3_800_CCF_MASK;
 558     } else
 559         ccf = 0;
 560 
 561     /*
 562      * If we don't have a SCSI clock programmed, pick one on the upper
 563      * bound of that allowed by NCR so that our transfers err on the 
 564      * slow side, since transfer period must be >= the agreed 
 565      * appon period.
 566      */
 567 
 568     if (!hostdata->scsi_clock) 
 569         switch(ccf) {
 570         case 1: hostdata->scsi_clock = 25000000; break; /* Divide by 1.0 */
 571         case 2: hostdata->scsi_clock = 37500000; break; /* Divide by 1.5 */
 572         case 3: hostdata->scsi_clock = 50000000; break; /* Divide by 2.0 */
 573         case 0:                                         /* Divide by 3.0 */
 574         case 4: hostdata->scsi_clock = 66000000; break; 
 575         default: 
 576             printk ("scsi%d : clock conversion factor %d unknown.\n"
 577                     "         synchronous transfers disabled\n",
 578                     host->host_no, ccf);
 579             hostdata->options &= ~OPTION_SYNCHRONOUS;
 580             hostdata->scsi_clock = 0; 
 581         }
 582 
 583     printk ("scsi%d : using %dMHz SCSI clock\n", host->host_no, 
 584         hostdata->scsi_clock / 1000000);
 585     /*
 586      * Initialize per-target structures, including busy flags and 
 587      * synchronous transfer parameters.
 588      */
 589 
 590     for (i = 0; i < 8; ++i) {
 591         hostdata->cmd_allocated[i] = 0;
 592         for (j = 0; j < 8; ++j)
 593             hostdata->busy[i][j] = 0;
 594         /* 
 595          * NCR53c700 and NCR53c700-66 chips lack the DSA and use a 
 596          * different architecture.  For chips using the DSA architecture,
 597          * initialize the per-target synchronous parameters. 
 598          */
 599         if (hostdata->chip != 700 && hostdata->chip != 70066) {
 600             hostdata->sync[i].select_indirect |= (i << 16); 
 601             /* XXX - program SCSI script for immediate return */ 
 602             hostdata->sync[i].script[0] = (DCMD_TYPE_TCI|DCMD_TCI_OP_RETURN) << 24 | 
 603                 DBC_TCI_TRUE;
 604             switch (hostdata->chip) {
 605             /* Clock divisor */
 606             case 825:
 607             case 820:
 608                 /* Fall through to 810 */
 609             case 815:
 610             case 810:
 611                 hostdata->sync[i].select_indirect |= (hostdata->saved_scntl3) << 24;
 612                 break;
 613             default:
 614             }
 615         }
 616     }
 617 
 618     hostdata->issue_queue = hostdata->running_list = 
 619         hostdata->finished_queue = NULL;
 620     hostdata->issue_dsa_head = 0;
 621     hostdata->issue_dsa_tail = NULL;
 622 
 623     if (hostdata->init_save_regs)
 624         hostdata->init_save_regs (host);
 625     if (hostdata->init_fixup)
 626         hostdata->init_fixup (host);
 627 
 628     if (!the_template) {
 629         the_template = host->hostt;
 630         first_host = host;
 631     }
 632 
 633     hostdata->idle = 1;
 634 
 635     /* 
 636      * Linux SCSI drivers have always been plagued with initialization 
 637      * problems - some didn't work with the BIOS disabled since they expected
 638      * initialization from it, some didn't work when the networking code
 639      * was enabled and registers got scrambled, etc.
 640      *
 641      * To avoid problems like this, in the future, we will do a soft 
 642      * reset on the SCSI chip, taking it back to a sane state.
 643      */
 644 
 645     hostdata->soft_reset (host);
 646 
 647     hostdata->debug_count_limit = -1;
 648     hostdata->intrs = -1;
 649     hostdata->expecting_iid = 0;
 650     hostdata->expecting_sto = 0;
 651 
 652     if ((hostdata->run_tests && hostdata->run_tests(host) == -1) ||
 653         (hostdata->options & OPTION_DEBUG_TESTS_ONLY)) {
 654         /* XXX Should disable interrupts, etc. here */
 655         scsi_unregister (host);
 656         return -1;
 657     } else 
 658         return 0;
 659 }
 660 
 661 /* 
 662  * Function : static int normal_init(Scsi_Host_Template *tpnt, int board, 
 663  *      int chip, int base, int io_port, int irq, int dma, int pcivalid,
 664  *      unsigned char pci_bus, unsigned char pci_device_fn,
 665  *      int options);
 666  *
 667  * Purpose : initializes a NCR53c7,8x0 based on base addresses,
 668  *      IRQ, and DMA channel.   
 669  *      
 670  *      Useful where a new NCR chip is backwards compatible with
 671  *      a supported chip, but the DEVICE ID has changed so it 
 672  *      doesn't show up when the autoprobe does a pcibios_find_device.
 673  *
 674  * Inputs : tpnt - Template for this SCSI adapter, board - board level
 675  *      product, chip - 810, 820, or 825, bus - PCI bus, device_fn -
 676  *      device and function encoding as used by PCI BIOS calls.
 677  * 
 678  * Returns : 0 on success, -1 on failure.
 679  *
 680  */
 681 
 682 static int normal_init (Scsi_Host_Template *tpnt, int board, int chip, 
     /* [previous][next][first][last][top][bottom][index][help] */
 683     u32 base, int io_port, int irq, int dma, int pci_valid, 
 684     unsigned char pci_bus, unsigned char pci_device_fn, int options) {
 685     struct Scsi_Host *instance;
 686     struct NCR53c7x0_hostdata *hostdata;
 687     char chip_str[80];
 688     int script_len = 0, dsa_len = 0, size = 0, max_cmd_size = 0;
 689     int ok = 0;
 690 
 691     
 692     options |= perm_options;
 693 
 694     switch (chip) {
 695     case 825:
 696     case 820:
 697     case 815:
 698     case 810:
 699         script_len = NCR53c8xx_script_len;
 700         dsa_len = NCR53c8xx_dsa_len;
 701         options |= OPTION_INTFLY;
 702         sprintf (chip_str, "NCR53c%d", chip);
 703         break;
 704     default:
 705         printk("scsi-ncr53c7,8xx : unsupported SCSI chip %d\n", chip);
 706         return -1;
 707     }
 708 
 709     printk("scsi-ncr53c7,8xx : %s at memory 0x%x, io 0x%x, irq %d",
 710         chip_str, base, io_port, irq);
 711     if (dma == DMA_NONE)
 712         printk("\n");
 713     else 
 714         printk(", dma %d\n", dma);
 715 
 716     if ((chip / 100 == 8) && !pci_valid) 
 717         printk ("scsi-ncr53c7,8xx : for better reliability and performance, please use the\n" 
 718                 "        PCI override instead.\n"
 719                 "        Syntax : ncr53c8{10,15,20,25}=pci,<bus>,<device>,<function>\n"
 720                 "                 <bus> and <device> are usually 0.\n");
 721 
 722     if (options & OPTION_DEBUG_PROBE_ONLY) {
 723         printk ("scsi-ncr53c7,8xx : probe only enabled, aborting initialization\n");
 724         return -1;
 725     }
 726 
 727     max_cmd_size = sizeof(struct NCR53c7x0_cmd) + dsa_len +
 728         /* Size of dynamic part of command structure : */
 729         2 * /* Worst case : we don't know if we need DATA IN or DATA out */
 730                 ( 2 * /* Current instructions per scatter/gather segment */ 
 731                   tpnt->sg_tablesize + 
 732                   3 /* Current startup / termination required per phase */
 733                 ) *
 734         8 /* Each instruction is eight bytes */;
 735     /* Note that alignment will be guaranteed, since we put the command
 736        allocated at probe time after the fixed-up SCSI script, which 
 737        consists of 32 bit words, aligned on a 32 bit boundary. */ 
 738 
 739     /* Allocate fixed part of hostdata, dynamic part to hold appropriate
 740        SCSI SCRIPT(tm) plus a single, maximum-sized NCR53c7x0_cmd structure.
 741 
 742        We need a NCR53c7x0_cmd structure for scan_scsis() when we are 
 743        not loaded as a module, and when we're loaded as a module, we 
 744        can't use a non-dynamically allocated structure because modules
 745        are vmalloc()'d, which can allow structures to cross page 
 746        boundaries and breaks our physical/virtual address assumptions
 747        for DMA.
 748 
 749        So, we stick it past the end of our hostdata structure.
 750 
 751        ASSUMPTION : 
 752          Regardless of how many simultaneous SCSI commands we allow,
 753          the probe code only executes a _single_ instruction at a time,
 754          so we only need one here, and don't need to allocate NCR53c7x0_cmd
 755          structures for each target until we are no longer in scan_scsis
 756          and kmalloc() has become functional (memory_init() happens 
 757          after all device driver initialization).
 758     */
 759 
 760     size = sizeof(struct NCR53c7x0_hostdata) + script_len + max_cmd_size;
 761 
 762     instance = scsi_register (tpnt, size);
 763     if (!instance)
 764         return -1;
 765 
 766 
 767     /* FIXME : if we ever support an ISA NCR53c7xx based board, we
 768        need to check if the chip is running in a 16 bit mode, and if so 
 769        unregister it if it is past the 16M (0x1000000) mark */
 770         
 771     hostdata = (struct NCR53c7x0_hostdata *) 
 772         instance->hostdata;
 773     hostdata->size = size;
 774     hostdata->script_count = script_len / sizeof(u32);
 775     hostdata = (struct NCR53c7x0_hostdata *) instance->hostdata;
 776     hostdata->board = board;
 777     hostdata->chip = chip;
 778     if ((hostdata->pci_valid = pci_valid)) {
 779         hostdata->pci_bus = pci_bus;
 780         hostdata->pci_device_fn = pci_device_fn;
 781     }
 782 
 783     /*
 784      * Being memory mapped is more desirable, since 
 785      *
 786      * - Memory accesses may be faster.
 787      *
 788      * - The destination and source address spaces are the same for 
 789      *   all instructions, meaning we don't have to twiddle dmode or 
 790      *   any other registers.
 791      *
 792      * So, we try for memory mapped, and if we don't get it,
 793      * we go for port mapped, and that failing we tell the user
 794      * it can't work.
 795      */
 796 
 797     if (base) {
 798         instance->base = (unsigned char*) (unsigned long) base;
 799         /* Check for forced I/O mapping */
 800         if (!(options & OPTION_IO_MAPPED)) {
 801             options |= OPTION_MEMORY_MAPPED;
 802             ok = 1;
 803         }
 804     } else {
 805         options &= ~OPTION_MEMORY_MAPPED;
 806     }
 807 
 808     if (io_port) {
 809         instance->io_port = io_port;
 810         options |= OPTION_IO_MAPPED;
 811         ok = 1;
 812     } else {
 813         options &= ~OPTION_IO_MAPPED;
 814     }
 815 
 816     if (!ok) {
 817         printk ("scsi%d : not initializing, no I/O or memory mapping known \n",
 818             instance->host_no);
 819         scsi_unregister (instance);
 820         return -1;
 821     }
 822     instance->irq = irq;
 823     instance->dma_channel = dma;
 824 
 825     hostdata->options = options;
 826     hostdata->dsa_size = dsa_len;
 827     hostdata->max_cmd_size = max_cmd_size;
 828     hostdata->num_cmds = 1;
 829     /* Initialize single command */
 830     hostdata->free = (struct NCR53c7x0_cmd *) 
 831         (hostdata->script + hostdata->script_count);
 832     hostdata->free->real = (void *) hostdata->free;
 833     hostdata->free->size = max_cmd_size;
 834     hostdata->free->free = NULL;
 835     hostdata->free->next = NULL;
 836 
 837 
 838     return NCR53c7x0_init(instance);
 839 }
 840 
 841 
 842 /* 
 843  * Function : static int pci_init(Scsi_Host_Template *tpnt, int board, 
 844  *      int chip, int bus, int device_fn, int options)
 845  *
 846  * Purpose : initializes a NCR53c800 family based on the PCI
 847  *      bus, device, and function location of it.  Allows 
 848  *      reprogramming of latency timer and determining addresses
 849  *      and whether bus mastering, etc. are OK.
 850  *      
 851  *      Useful where a new NCR chip is backwards compatible with
 852  *      a supported chip, but the DEVICE ID has changed so it 
 853  *      doesn't show up when the autoprobe does a pcibios_find_device.
 854  *
 855  * Inputs : tpnt - Template for this SCSI adapter, board - board level
 856  *      product, chip - 810, 820, or 825, bus - PCI bus, device_fn -
 857  *      device and function encoding as used by PCI BIOS calls.
 858  * 
 859  * Returns : 0 on success, -1 on failure.
 860  *
 861  */
 862 
 863 static int ncr_pci_init (Scsi_Host_Template *tpnt, int board, int chip, 
     /* [previous][next][first][last][top][bottom][index][help] */
 864     unsigned char bus, unsigned char device_fn, int options) {
 865     unsigned short vendor_id, device_id, command;
 866     u32 base;
 867     int io_port; 
 868     unsigned char irq, revision;
 869     int error, expected_chip;
 870     int expected_id = -1, max_revision = -1, min_revision = -1;
 871     int i;
 872 
 873     printk("scsi-ncr53c7,8xx : at PCI bus %d, device %d,  function %d\n",
 874         bus, (int) (device_fn & 0xf8) >> 3, 
 875         (int) device_fn & 7);
 876 
 877     if (!pcibios_present) {
 878         printk("scsi-ncr53c7,8xx : not initializing due to lack of PCI BIOS,\n"
 879                "        try using memory, port, irq override instead.\n");
 880         return -1;
 881     }
 882 
 883     if ((error = pcibios_read_config_word (bus, device_fn, PCI_VENDOR_ID, 
 884         &vendor_id)) ||
 885         (error = pcibios_read_config_word (bus, device_fn, PCI_DEVICE_ID, 
 886             &device_id)) ||
 887         (error = pcibios_read_config_word (bus, device_fn, PCI_COMMAND, 
 888             &command)) ||
 889         (error = pcibios_read_config_dword (bus, device_fn, 
 890             PCI_BASE_ADDRESS_0, (int *) &io_port)) || 
 891         (error = pcibios_read_config_dword (bus, device_fn, 
 892             PCI_BASE_ADDRESS_1, (int *) &base)) ||
 893         (error = pcibios_read_config_byte (bus, device_fn, PCI_CLASS_REVISION,
 894             &revision)) ||
 895         (error = pcibios_read_config_byte (bus, device_fn, PCI_INTERRUPT_LINE,
 896             &irq))) {
 897         printk ("scsi-ncr53c7,8xx : error %s not initializing due to error reading configuration space\n"
 898                 "        perhaps you specified an incorrect PCI bus, device, or function.\n"
 899                 , pci_strbioserr(error));
 900         return -1;
 901     }
 902 
 903     /* If any one ever clones the NCR chips, this will have to change */
 904 
 905     if (vendor_id != PCI_VENDOR_ID_NCR) {
 906         printk ("scsi-ncr53c7,8xx : not initializing, 0x%04x is not NCR vendor ID\n",
 907             (int) vendor_id);
 908         return -1;
 909     }
 910 
 911 
 912     /* 
 913      * Bit 0 is the address space indicator and must be one for I/O
 914      * space mappings, bit 1 is reserved, discard them after checking
 915      * that they have the correct value of 1.
 916      */
 917 
 918     if (command & PCI_COMMAND_IO) { 
 919         if ((io_port & 3) != 1) {
 920             printk ("scsi-ncr53c7,8xx : disabling I/O mapping since base address 0 (0x%x)\n"
 921                     "        bits 0..1 indicate a non-IO mapping\n", io_port);
 922             io_port = 0;
 923         } else
 924             io_port &= PCI_BASE_ADDRESS_IO_MASK;
 925     } else {
 926             io_port = 0;
 927     }
 928 
 929     if (command & PCI_COMMAND_MEMORY) {
 930         if ((base & PCI_BASE_ADDRESS_SPACE) != PCI_BASE_ADDRESS_SPACE_MEMORY) {
 931             printk("scsi-ncr53c7,8xx : disabling memory mapping since base address 1\n"
 932                    "        contains a non-memory mapping\n");
 933             base = 0;
 934         } else 
 935             base &= PCI_BASE_ADDRESS_MEM_MASK;
 936     } else {
 937             base = 0;
 938     }
 939         
 940     if (!io_port && !base) {
 941         printk ("scsi-ncr53c7,8xx : not initializing, both I/O and memory mappings disabled\n");
 942         return -1;
 943     }
 944         
 945     if (!(command & PCI_COMMAND_MASTER)) {
 946         printk ("scsi-ncr53c7,8xx : not initializing, BUS MASTERING was disabled\n");
 947         return -1;
 948     }
 949 
 950     for (i = 0; i < NPCI_CHIP_IDS; ++i) {
 951         if (device_id == pci_chip_ids[i].pci_device_id) {
 952             max_revision = pci_chip_ids[i].max_revision;
 953             min_revision = pci_chip_ids[i].min_revision;
 954             expected_chip = pci_chip_ids[i].chip;
 955         }
 956         if (chip == pci_chip_ids[i].chip)
 957             expected_id = pci_chip_ids[i].pci_device_id;
 958     }
 959 
 960     if (chip && device_id != expected_id) 
 961         printk ("scsi-ncr53c7,8xx : warning : device id of 0x%04x doesn't\n"
 962                 "                   match expected 0x%04x\n",
 963             (unsigned int) device_id, (unsigned int) expected_id );
 964     
 965     if (max_revision != -1 && revision > max_revision) 
 966         printk ("scsi-ncr53c7,8xx : warning : revision of %d is greater than %d.\n",
 967             (int) revision, max_revision);
 968     else if (min_revision != -1 && revision < min_revision)
 969         printk ("scsi-ncr53c7,8xx : warning : revision of %d is less than %d.\n",
 970             (int) revision, min_revision);
 971 
 972     return normal_init (tpnt, board, chip, (int) base, io_port, 
 973         (int) irq, DMA_NONE, 1, bus, device_fn, options);
 974 }
 975 
 976 
 977 /* 
 978  * Function : int NCR53c7xx_detect(Scsi_Host_Template *tpnt)
 979  *
 980  * Purpose : detects and initializes NCR53c7,8x0 SCSI chips
 981  *      that were autoprobed, overridden on the LILO command line, 
 982  *      or specified at compile time.
 983  *
 984  * Inputs : tpnt - template for this SCSI adapter
 985  * 
 986  * Returns : number of host adapters detected
 987  *
 988  */
 989 
 990 int NCR53c7xx_detect(Scsi_Host_Template *tpnt) {
     /* [previous][next][first][last][top][bottom][index][help] */
 991     int i;
 992     int current_override;
 993     int count;                  /* Number of boards detected */
 994     unsigned char pci_bus, pci_device_fn;
 995     static short pci_index=0;   /* Device index to PCI BIOS calls */
 996 
 997     tpnt->proc_dir = &proc_scsi_ncr53c7xx;
 998 
 999     for (current_override = count = 0; current_override < OVERRIDE_LIMIT; 
1000          ++current_override) {
1001          if (overrides[current_override].pci ? 
1002             !ncr_pci_init (tpnt, overrides[current_override].board,
1003                 overrides[current_override].chip,
1004                 (unsigned char) overrides[current_override].data.pci.bus,
1005                 (((overrides[current_override].data.pci.device
1006                 << 3) & 0xf8)|(overrides[current_override].data.pci.function & 
1007                 7)), overrides[current_override].options):
1008             !normal_init (tpnt, overrides[current_override].board, 
1009                 overrides[current_override].chip, 
1010                 overrides[current_override].data.normal.base, 
1011                 overrides[current_override].data.normal.io_port,
1012                 overrides[current_override].data.normal.irq,
1013                 overrides[current_override].data.normal.dma,
1014                 0 /* PCI data invalid */, 0 /* PCI bus place holder */,  
1015                 0 /* PCI device_function place holder */,
1016                 overrides[current_override].options)) {
1017             ++count;
1018         } 
1019     }
1020 
1021     if (pcibios_present()) {
1022         for (i = 0; i < NPCI_CHIP_IDS; ++i) 
1023             for (pci_index = 0;
1024                 !pcibios_find_device (PCI_VENDOR_ID_NCR, 
1025                     pci_chip_ids[i].pci_device_id, pci_index, &pci_bus, 
1026                     &pci_device_fn) && 
1027                 !ncr_pci_init (tpnt, BOARD_GENERIC, pci_chip_ids[i].chip, 
1028                     pci_bus, pci_device_fn, /* no options */ 0); 
1029                 ++count, ++pci_index);
1030     }
1031     return count;
1032 }
1033 
1034 /* NCR53c810 and NCR53c820 script handling code */
1035 
1036 #include "53c8xx_d.h"
1037 static int NCR53c8xx_script_len = sizeof (SCRIPT);
1038 static int NCR53c8xx_dsa_len = A_dsa_end + Ent_dsa_zero - Ent_dsa_code_template;
1039 
1040 /* 
1041  * Function : static void NCR53c8x0_init_fixup (struct Scsi_Host *host)
1042  *
1043  * Purpose :  copy and fixup the SCSI SCRIPTS(tm) code for this device.
1044  *
1045  * Inputs : host - pointer to this host adapter's structure
1046  *
1047  */
1048 
1049 static void 
1050 NCR53c8x0_init_fixup (struct Scsi_Host *host) {
     /* [previous][next][first][last][top][bottom][index][help] */
1051     NCR53c7x0_local_declare();
1052     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
1053         host->hostdata;
1054     unsigned char tmp;
1055     int i, ncr_to_memory, memory_to_ncr, ncr_to_ncr;
1056     u32 base;
1057     NCR53c7x0_local_setup(host);
1058 
1059 
1060 
1061     /* XXX - NOTE : this code MUST be made endian aware */
1062     /*  Copy code into buffer that was allocated at detection time.  */
1063     memcpy ((void *) hostdata->script, (void *) SCRIPT, 
1064         sizeof(SCRIPT));
1065     /* Fixup labels */
1066     for (i = 0; i < PATCHES; ++i) 
1067         hostdata->script[LABELPATCHES[i]] +=
1068             virt_to_bus(hostdata->script);
1069     /* Fixup addresses of constants that used to be EXTERNAL */
1070 
1071     patch_abs_32 (hostdata->script, 0, NCR53c7xx_msg_abort, 
1072         virt_to_bus(&hostdata->NCR53c7xx_msg_abort));
1073     patch_abs_32 (hostdata->script, 0, NCR53c7xx_msg_reject, 
1074         virt_to_bus(&hostdata->NCR53c7xx_msg_reject));
1075     patch_abs_32 (hostdata->script, 0, NCR53c7xx_zero, 
1076         virt_to_bus(&hostdata->NCR53c7xx_zero));
1077     patch_abs_32 (hostdata->script, 0, NCR53c7xx_sink, 
1078         virt_to_bus(&hostdata->NCR53c7xx_sink));
1079 
1080     /* Fixup references to external variables: */
1081     for (i = 0; i < EXTERNAL_PATCHES_LEN; ++i)
1082         hostdata->script[EXTERNAL_PATCHES[i].offset] +=
1083           virt_to_bus(EXTERNAL_PATCHES[i].address);
1084 
1085     /* 
1086      * Fixup absolutes set at boot-time.
1087      * 
1088      * All Absolute variables suffixed with "dsa_" and "int_"
1089      * are constants, and need no fixup provided the assembler has done 
1090      * it for us (I don't know what the "real" NCR assembler does in 
1091      * this case, my assembler does the right magic).
1092      */
1093 
1094     /*
1095      * Just for the hell of it, preserve the settings of 
1096      * Burst Length and Enable Read Line bits from the DMODE 
1097      * register.  Make sure SCRIPTS start automagically.
1098      */
1099 
1100     tmp = NCR53c7x0_read8(DMODE_REG_10);
1101     tmp &= (DMODE_800_ERL | DMODE_BL_MASK);
1102 
1103     if (!(hostdata->options & OPTION_MEMORY_MAPPED)) {
1104         base = (u32) host->io_port;
1105         memory_to_ncr = tmp|DMODE_800_DIOM;
1106         ncr_to_memory = tmp|DMODE_800_SIOM;
1107         ncr_to_ncr = tmp|DMODE_800_DIOM|DMODE_800_SIOM;
1108     } else {
1109         base = virt_to_phys(host->base);
1110         ncr_to_ncr = memory_to_ncr = ncr_to_memory = tmp;
1111     }
1112 
1113     patch_abs_32 (hostdata->script, 0, addr_scratch, base + SCRATCHA_REG_800);
1114     patch_abs_32 (hostdata->script, 0, addr_sfbr, base + SFBR_REG);
1115     patch_abs_32 (hostdata->script, 0, addr_temp, base + TEMP_REG);
1116 
1117     /*
1118      * I needed some variables in the script to be accessible to 
1119      * both the NCR chip and the host processor. For these variables,
1120      * I made the arbitrary decision to store them directly in the 
1121      * hostdata structure rather than in the RELATIVE area of the 
1122      * SCRIPTS.
1123      */
1124 
1125 
1126     patch_abs_rwri_data (hostdata->script, 0, dmode_memory_to_memory, tmp);
1127     patch_abs_rwri_data (hostdata->script, 0, dmode_memory_to_ncr, memory_to_ncr);
1128     patch_abs_rwri_data (hostdata->script, 0, dmode_ncr_to_memory, ncr_to_memory);
1129     patch_abs_rwri_data (hostdata->script, 0, dmode_ncr_to_ncr, ncr_to_ncr);
1130 
1131     patch_abs_32 (hostdata->script, 0, issue_dsa_head,
1132                   virt_to_bus((void*)&hostdata->issue_dsa_head));
1133     patch_abs_32 (hostdata->script, 0, msg_buf,
1134                   virt_to_bus((void*)&hostdata->msg_buf));
1135     patch_abs_32 (hostdata->script, 0, reconnect_dsa_head,
1136                   virt_to_bus((void*)&hostdata->reconnect_dsa_head));
1137     patch_abs_32 (hostdata->script, 0, reselected_identify,
1138                   virt_to_bus((void*)&hostdata->reselected_identify));
1139     patch_abs_32 (hostdata->script, 0, reselected_tag,
1140                   virt_to_bus((void*)&hostdata->reselected_tag));
1141 
1142     patch_abs_32 (hostdata->script, 0, test_dest,
1143                   virt_to_bus((void*)&hostdata->test_dest));
1144     patch_abs_32 (hostdata->script, 0, test_src, virt_to_bus(&hostdata->test_source));
1145 
1146 
1147     /*
1148      * Make sure the NCR and Linux code agree on the location of 
1149      * certain fields.
1150      */
1151 
1152 /* 
1153  * XXX - for cleanness, E_* fields should be type u32 *
1154  * and should reflect the _relocated_ addresses.  Change this.
1155  */
1156     hostdata->E_accept_message = Ent_accept_message;
1157     hostdata->E_command_complete = Ent_command_complete;                
1158     hostdata->E_debug_break = Ent_debug_break;  
1159     hostdata->E_dsa_code_template = Ent_dsa_code_template;
1160     hostdata->E_dsa_code_template_end = Ent_dsa_code_template_end;
1161     hostdata->E_initiator_abort = Ent_initiator_abort;
1162     hostdata->E_msg_in = Ent_msg_in;
1163     hostdata->E_other_transfer = Ent_other_transfer;
1164     hostdata->E_reject_message = Ent_reject_message;
1165     hostdata->E_respond_message = Ent_respond_message;
1166     hostdata->E_schedule = Ent_schedule;                        
1167     hostdata->E_select = Ent_select;
1168     hostdata->E_select_msgout = Ent_select_msgout;
1169     hostdata->E_target_abort = Ent_target_abort;
1170 #ifdef Ent_test_0
1171     hostdata->E_test_0 = Ent_test_0;
1172 #endif
1173     hostdata->E_test_1 = Ent_test_1;
1174     hostdata->E_test_2 = Ent_test_2;
1175 #ifdef Ent_test_3
1176     hostdata->E_test_3 = Ent_test_3;
1177 #endif
1178 
1179     hostdata->dsa_cmdout = A_dsa_cmdout;
1180     hostdata->dsa_cmnd = A_dsa_cmnd;
1181     hostdata->dsa_datain = A_dsa_datain;
1182     hostdata->dsa_dataout = A_dsa_dataout;
1183     hostdata->dsa_end = A_dsa_end;                      
1184     hostdata->dsa_msgin = A_dsa_msgin;
1185     hostdata->dsa_msgout = A_dsa_msgout;
1186     hostdata->dsa_msgout_other = A_dsa_msgout_other;
1187     hostdata->dsa_next = A_dsa_next;
1188     hostdata->dsa_select = A_dsa_select;
1189     hostdata->dsa_start = Ent_dsa_code_template - Ent_dsa_zero;
1190     hostdata->dsa_status = A_dsa_status;
1191 
1192     /* sanity check */
1193     if (A_dsa_fields_start != Ent_dsa_code_template_end - 
1194         Ent_dsa_zero) 
1195         printk("scsi%d : NCR dsa_fields start is %d not %d\n",
1196             host->host_no, A_dsa_fields_start, Ent_dsa_code_template_end - 
1197             Ent_dsa_zero);
1198 
1199     printk("scsi%d : NCR code relocated to 0x%p\n", host->host_no,
1200         hostdata->script);
1201 }
1202 
1203 /*
1204  * Function : static int NCR53c8xx_run_tests (struct Scsi_Host *host)
1205  *
1206  * Purpose : run various verification tests on the NCR chip, 
1207  *      including interrupt generation, and proper bus mastering
1208  *      operation.
1209  * 
1210  * Inputs : host - a properly initialized Scsi_Host structure
1211  *
1212  * Preconditions : the NCR chip must be in a halted state.
1213  *
1214  * Returns : 0 if all tests were successful, -1 on error.
1215  * 
1216  */
1217 
1218 static int NCR53c8xx_run_tests (struct Scsi_Host *host) {
     /* [previous][next][first][last][top][bottom][index][help] */
1219     NCR53c7x0_local_declare();
1220     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
1221         host->hostdata;
1222     unsigned long timeout;
1223     u32 start;
1224     int failed, i;
1225     unsigned long flags;
1226     NCR53c7x0_local_setup(host);
1227 
1228     /* The NCR chip _must_ be idle to run the test scripts */
1229 
1230     save_flags(flags);
1231     cli();
1232     if (!hostdata->idle) {
1233         printk ("scsi%d : chip not idle, aborting tests\n", host->host_no);
1234         restore_flags(flags);
1235         return -1;
1236     }
1237 
1238     /* 
1239      * Check for functional interrupts, this could work as an
1240      * autoprobe routine.
1241      */
1242 
1243     if (hostdata->issue_dsa_head) {
1244         printk ("scsi%d : hostdata->issue_dsa_head corrupt before test 1\n",
1245             host->host_no);
1246         hostdata->issue_dsa_head = 0;
1247     }
1248         
1249     if (hostdata->options & OPTION_DEBUG_TEST1) {
1250         hostdata->idle = 0;
1251         hostdata->test_running = 1;
1252         hostdata->test_completed = -1;
1253         hostdata->test_dest = 0;
1254         hostdata->test_source = 0xdeadbeef;
1255         start = virt_to_bus(hostdata->script) + hostdata->E_test_1;
1256         hostdata->state = STATE_RUNNING;
1257         printk ("scsi%d : test 1", host->host_no);
1258         NCR53c7x0_write32 (DSP_REG, start);
1259         mb();
1260         printk (" started\n");
1261         sti();
1262 
1263         timeout = jiffies + 5 * HZ / 10;        /* arbitrary */
1264         while ((hostdata->test_completed == -1) && jiffies < timeout)
1265                 barrier();
1266 
1267         failed = 1;
1268         if (hostdata->test_completed == -1)
1269             printk ("scsi%d : driver test 1 timed out%s\n",host->host_no ,
1270                 (hostdata->test_dest == 0xdeadbeef) ? 
1271                     " due to lost interrupt.\n"
1272                     "         Please verify that the correct IRQ is being used for your board,\n"
1273                     "         and that the motherboard IRQ jumpering matches the PCI setup on\n"
1274                     "         PCI systems.\n"
1275                     "         If you are using a NCR53c810 board in a PCI system, you should\n" 
1276                     "         also verify that the board is jumpered to use PCI INTA, since\n"
1277                     "         most PCI motherboards lack support for INTB, INTC, and INTD.\n"
1278                     : "");
1279         else if (hostdata->test_completed != 1) 
1280             printk ("scsi%d : test 1 bad interrupt value (%d)\n", host->host_no,
1281                 hostdata->test_completed);
1282         else 
1283             failed = (hostdata->test_dest != 0xdeadbeef);
1284 
1285         if (hostdata->test_dest != 0xdeadbeef) {
1286             printk ("scsi%d : driver test 1 read 0x%x instead of 0xdeadbeef indicating a\n"
1287                     "        probable cache invalidation problem.  Please configure caching\n"
1288                     "        as write-through or disabled\n",
1289                 host->host_no, hostdata->test_dest);
1290         }
1291 
1292         if (failed) {
1293             printk ("scsi%d : DSP = 0x%x (script at 0x%p, start at 0x%x)\n",
1294                 host->host_no, NCR53c7x0_read32(DSP_REG),
1295                 hostdata->script, start);
1296             printk ("scsi%d : DSPS = 0x%x\n", host->host_no,
1297                 NCR53c7x0_read32(DSPS_REG));
1298             restore_flags(flags);
1299             return -1;
1300         }
1301         hostdata->test_running = 0;
1302     }
1303 
1304     if (hostdata->issue_dsa_head) {
1305         printk ("scsi%d : hostdata->issue_dsa_head corrupt after test 1\n",
1306             host->host_no);
1307         hostdata->issue_dsa_head = 0;
1308     }
1309 
1310     if (hostdata->options & OPTION_DEBUG_TEST2) {
1311         u32 dsa[48];
1312         unsigned char identify = IDENTIFY(0, 0);
1313         unsigned char cmd[6];
1314         unsigned char data[36];
1315         unsigned char status = 0xff;
1316         unsigned char msg = 0xff;
1317 
1318         cmd[0] = INQUIRY;
1319         cmd[1] = cmd[2] = cmd[3] = cmd[5] = 0;
1320         cmd[4] = sizeof(data); 
1321 
1322         dsa[2] = 1;
1323         dsa[3] = virt_to_bus(&identify);
1324         dsa[4] = 6;
1325         dsa[5] = virt_to_bus(&cmd);
1326         dsa[6] = sizeof(data);
1327         dsa[7] = virt_to_bus(&data);
1328         dsa[8] = 1;
1329         dsa[9] = virt_to_bus(&status);
1330         dsa[10] = 1;
1331         dsa[11] = virt_to_bus(&msg);
1332 
1333         for (i = 0; i < 3; ++i) {
1334             cli();
1335             if (!hostdata->idle) {
1336                 printk ("scsi%d : chip not idle, aborting tests\n", host->host_no);
1337                 restore_flags(flags);
1338                 return -1;
1339             }
1340 
1341             /*       SCNTL3         SDID        */
1342             dsa[0] = (0x33 << 24) | (i << 16)  ;
1343             hostdata->idle = 0;
1344             hostdata->test_running = 2;
1345             hostdata->test_completed = -1;
1346             start = virt_to_bus(hostdata->script) + hostdata->E_test_2;
1347             hostdata->state = STATE_RUNNING;
1348             NCR53c7x0_write32 (DSA_REG, virt_to_bus(dsa));
1349             NCR53c7x0_write32 (DSP_REG, start);
1350             mb();
1351             sti();
1352 
1353             timeout = jiffies + 5 * HZ; /* arbitrary */
1354             while ((hostdata->test_completed == -1) && jiffies < timeout)
1355                 barrier();
1356             NCR53c7x0_write32 (DSA_REG, 0);
1357             mb();
1358 
1359             if (hostdata->test_completed == 2) {
1360                 data[35] = 0;
1361                 printk ("scsi%d : test 2 INQUIRY to target %d, lun 0 : %s\n",
1362                     host->host_no, i, data + 8);
1363                 printk ("scsi%d : status ", host->host_no);
1364                 print_status (status);
1365                 printk ("\nscsi%d : message ", host->host_no);
1366                 print_msg (&msg);
1367                 printk ("\n");
1368             } else if (hostdata->test_completed == 3) {
1369                 printk("scsi%d : test 2 no connection with target %d\n",
1370                     host->host_no, i);
1371                 if (!hostdata->idle) {
1372                     printk("scsi%d : not idle\n", host->host_no);
1373                     restore_flags(flags);
1374                     return -1;
1375                 }
1376             } else if (hostdata->test_completed == -1) {
1377                 printk ("scsi%d : test 2 timed out\n", host->host_no);
1378                 restore_flags(flags);
1379                 return -1;
1380             } 
1381             hostdata->test_running = 0;
1382             if (hostdata->issue_dsa_head) {
1383                 printk ("scsi%d : hostdata->issue_dsa_head corrupt after test 2 id %d\n",
1384                     host->host_no, i);
1385                 hostdata->issue_dsa_head = 0;
1386         }
1387         }
1388     }
1389 
1390     restore_flags(flags);
1391     return 0;
1392 }
1393 
1394 /*
1395  * Function : static void NCR53c8xx_dsa_fixup (struct NCR53c7x0_cmd *cmd)
1396  *
1397  * Purpose : copy the NCR53c8xx dsa structure into cmd's dsa buffer,
1398  *      performing all necessary relocation.
1399  *
1400  * Inputs : cmd, a NCR53c7x0_cmd structure with a dsa area large
1401  *      enough to hold the NCR53c8xx dsa.
1402  */
1403 
1404 static void NCR53c8xx_dsa_fixup (struct NCR53c7x0_cmd *cmd) {
     /* [previous][next][first][last][top][bottom][index][help] */
1405     Scsi_Cmnd *c = cmd->cmd;
1406     struct Scsi_Host *host = c->host;
1407     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
1408         host->hostdata;
1409     int i;
1410 
1411     memcpy (cmd->dsa, hostdata->script + (hostdata->E_dsa_code_template / 4),
1412         hostdata->E_dsa_code_template_end - hostdata->E_dsa_code_template);
1413 
1414     patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
1415         dsa_temp_jump_resume, virt_to_bus(cmd->dsa) + 
1416         Ent_dsa_jump_resume - Ent_dsa_zero);
1417     patch_abs_rwri_data (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
1418         dsa_temp_lun, c->lun);
1419     patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
1420         dsa_temp_dsa_next, virt_to_bus(cmd->dsa) + A_dsa_next);
1421     patch_abs_32 (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
1422         dsa_temp_sync, hostdata->sync[c->target].select_indirect);
1423     patch_abs_rwri_data (cmd->dsa, Ent_dsa_code_template / sizeof(u32),
1424         dsa_temp_target, c->target);
1425 }
1426 
1427 /*
1428  * Function : static void abnormal_finished (struct NCR53c7x0_cmd *cmd, int
1429  *      result)
1430  *
1431  * Purpose : mark SCSI command as finished, OR'ing the host portion 
1432  *      of the result word into the result field of the corresponding
1433  *      Scsi_Cmnd structure, and removing it from the internal queues.
1434  *
1435  * Inputs : cmd - command, result - entire result field
1436  *
1437  * Preconditions : the  NCR chip should be in a halted state when 
1438  *      abnormal_finished is run, since it modifies structures which
1439  *      the NCR expects to have exclusive access to.
1440  */
1441 
1442 static void abnormal_finished (struct NCR53c7x0_cmd *cmd, int result) {
     /* [previous][next][first][last][top][bottom][index][help] */
1443     Scsi_Cmnd *c = cmd->cmd;
1444     struct Scsi_Host *host = c->host;
1445     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
1446         host->hostdata;
1447     unsigned long flags;
1448     volatile u32 *prev, search;
1449     int i;
1450 
1451     save_flags(flags);
1452     cli();
1453     for (i = 0; i < 2; ++i) {
1454         for (search = (i ? hostdata->issue_dsa_head :
1455                 hostdata->reconnect_dsa_head), prev = (i ? 
1456                 &hostdata->issue_dsa_head : &hostdata->reconnect_dsa_head);
1457              search && ((char*)bus_to_virt(search) + hostdata->dsa_start) != (char *) cmd->dsa;
1458              prev = (u32*) ((char*)bus_to_virt(search) + hostdata->dsa_next),
1459                 search = *prev);
1460 
1461         if (search)
1462             *prev = *(u32*) ((char*)bus_to_virt(search) + hostdata->dsa_next);
1463     }
1464 
1465     if (cmd->prev)
1466         cmd->prev->next = cmd->next;
1467 
1468     if (cmd->next)
1469         cmd->next->prev = cmd->prev;
1470 
1471     if (hostdata->running_list == cmd)
1472         hostdata->running_list = cmd->next;
1473 
1474     cmd->next = hostdata->free;
1475     hostdata->free = cmd;
1476 
1477     c->host_scribble = NULL;
1478     c->result = result;
1479     c->scsi_done(c);
1480 
1481     restore_flags(flags);
1482 }
1483 
1484 /* 
1485  * Function : static void intr_break (struct Scsi_Host *host,
1486  *      struct NCR53c7x0_cmd *cmd)
1487  *
1488  * Purpose :  Handler for breakpoint interrupts from a SCSI script
1489  *
1490  * Inputs : host - pointer to this host adapter's structure,
1491  *      cmd - pointer to the command (if any) dsa was pointing 
1492  *      to.
1493  *
1494  */
1495 
1496 static void intr_break (struct Scsi_Host *host, struct 
     /* [previous][next][first][last][top][bottom][index][help] */
1497     NCR53c7x0_cmd *cmd) {
1498     NCR53c7x0_local_declare();
1499     struct NCR53c7x0_break *bp;
1500 #if 0
1501     Scsi_Cmnd *c = cmd ? cmd->cmd : NULL;
1502 #endif
1503     u32 *dsp;
1504     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
1505         host->hostdata;         
1506     unsigned long flags;
1507     NCR53c7x0_local_setup(host);
1508 
1509     /*
1510      * Find the break point corresponding to this address, and 
1511      * dump the appropriate debugging information to standard 
1512      * output.  
1513      */
1514 
1515     save_flags(flags);
1516     cli();
1517     dsp = (u32 *) bus_to_virt(NCR53c7x0_read32(DSP_REG));
1518     for (bp = hostdata->breakpoints; bp && bp->address != dsp; 
1519         bp = bp->next);
1520     if (!bp) 
1521         panic("scsi%d : break point interrupt from %p with no breakpoint!",
1522             host->host_no, dsp);
1523 
1524     /*
1525      * Configure the NCR chip for manual start mode, so that we can 
1526      * point the DSP register at the instruction that follows the 
1527      * INT int_debug_break instruction.
1528      */
1529 
1530     NCR53c7x0_write8 (hostdata->dmode, 
1531         NCR53c7x0_read8(hostdata->dmode)|DMODE_MAN);
1532     mb();
1533 
1534     /*
1535      * And update the DSP register, using the size of the old 
1536      * instruction in bytes.
1537      */
1538 
1539      restore_flags(flags);
1540 }
1541 
1542 /*
1543  * Function : static int asynchronous (struct Scsi_Host *host, int target)
1544  *
1545  * Purpose : reprogram between the selected SCSI Host adapter and target 
1546  *      (assumed to be currently connected) for asynchronous transfers.
1547  *
1548  * Inputs : host - SCSI host structure, target - numeric target ID.
1549  *
1550  * Preconditions : the NCR chip should be in one of the halted states
1551  */
1552     
1553 static int asynchronous (struct Scsi_Host *host, int target) {
     /* [previous][next][first][last][top][bottom][index][help] */
1554     NCR53c7x0_local_declare();
1555     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
1556         host->hostdata;
1557     NCR53c7x0_local_setup(host);
1558 
1559     if ((hostdata->chip / 100) == 8) {
1560         hostdata->sync[target].select_indirect = (hostdata->saved_scntl3 << 24)
1561             | (target << 16);
1562 /* Fill in script here */
1563     } else if ((hostdata->chip != 700) && (hostdata->chip != 70066)) {
1564         hostdata->sync[target].select_indirect = (1 << (target & 7)) << 16;
1565     }
1566 
1567 /* 
1568  * Halted implies connected, when resetting we shouldn't change the 
1569  * current parameters but must reset all targets to asynchronous.
1570  */
1571 
1572     if (hostdata->state == STATE_HALTED) {
1573         if ((hostdata->chip / 100) == 8) {
1574             NCR53c7x0_write8 (SCNTL3_REG_800, hostdata->saved_scntl3);
1575         }
1576     /* Offset = 0, transfer period = divide SCLK by 4 */
1577         NCR53c7x0_write8 (SXFER_REG, 0);
1578         mb();
1579     }
1580     return 0;
1581 }
1582 
1583 /* 
1584  * XXX - do we want to go out of our way (ie, add extra code to selection
1585  *      in the NCR53c710/NCR53c720 script) to reprogram the synchronous
1586  *      conversion bits, or can we be content in just setting the 
1587  *      sxfer bits?
1588  */
1589 
1590 /* Table for NCR53c8xx synchronous values */
1591 static const struct {
1592     int div;
1593     unsigned char scf;
1594     unsigned char tp;
1595 } syncs[] = {
1596 /*      div     scf     tp      div     scf     tp      div     scf     tp */
1597     {   40,     1,      0}, {   50,     1,      1}, {   60,     1,      2}, 
1598     {   70,     1,      3}, {   75,     2,      1}, {   80,     1,      4},
1599     {   90,     1,      5}, {   100,    1,      6}, {   105,    2,      3},
1600     {   110,    1,      7}, {   120,    2,      4}, {   135,    2,      5},
1601     {   140,    3,      3}, {   150,    2,      6}, {   160,    3,      4},
1602     {   165,    2,      7}, {   180,    3,      5}, {   200,    3,      6},
1603     {   210,    4,      3}, {   220,    3,      7}, {   240,    4,      4},
1604     {   270,    4,      5}, {   300,    4,      6}, {   330,    4,      7}
1605 };
1606 
1607 /*
1608  * Function : static void synchronous (struct Scsi_Host *host, int target, 
1609  *      char *msg)
1610  *
1611  * Purpose : reprogram transfers between the selected SCSI initiator and 
1612  *      target for synchronous SCSI transfers such that the synchronous 
1613  *      offset is less than that requested and period at least as long 
1614  *      as that requested.  Also modify *msg such that it contains 
1615  *      an appropriate response. 
1616  *
1617  * Inputs : host - NCR53c7,8xx SCSI host, target - number SCSI target id,
1618  *      msg - synchronous transfer request.
1619  */
1620 
1621 
1622 static void synchronous (struct Scsi_Host *host, int target, char *msg) {
     /* [previous][next][first][last][top][bottom][index][help] */
1623     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
1624         host->hostdata;
1625     int desire, divisor, i, limit;
1626     u32 *script;
1627     unsigned char scntl3, sxfer;
1628    
1629 /* Scale divisor by 10 to accommodate fractions */ 
1630     desire = 1000000000L / (msg[3] * 4);
1631     divisor = desire / (hostdata->scsi_clock / 10);
1632 
1633     if (msg[4] > 8)
1634         msg[4] = 8;
1635 
1636     printk("scsi%d : optimal synchronous divisor of %d.%01d\n", host->host_no,
1637         divisor / 10, divisor % 10);
1638 
1639     limit = (sizeof(syncs) / sizeof(syncs[0])) - 1;
1640     for (i = 0; (i < limit) && (divisor < syncs[i + 1].div); ++i);
1641 
1642     printk("scsi%d : selected synchronous divisor of %d.%01d\n", host->host_no,
1643         syncs[i].div / 10, syncs[i].div % 10);
1644 
1645     msg[3] = (1000000000 / divisor / 10 / 4);
1646 
1647     scntl3 = (hostdata->chip / 100 == 8) ? ((hostdata->saved_scntl3 & 
1648         ~SCNTL3_800_SCF_MASK) | (syncs[i].scf << SCNTL3_800_SCF_SHIFT)) : 0;
1649     sxfer = (msg[4] << SXFER_MO_SHIFT) | ((syncs[i].tp) << SXFER_TP_SHIFT);
1650 
1651     if ((hostdata->chip != 700) && (hostdata->chip != 70066)) {
1652         hostdata->sync[target].select_indirect = (scntl3 << 24) | (target << 16) | 
1653                 (sxfer << 8);
1654 
1655         script = (u32*) hostdata->sync[target].script;
1656 
1657         /* XXX - add NCR53c7x0 code to reprogram SCF bits if we want to */
1658         if ((hostdata->chip / 100) == 8) {
1659             script[0] = ((DCMD_TYPE_RWRI | DCMD_RWRI_OPC_MODIFY |
1660                 DCMD_RWRI_OP_MOVE) << 24) |
1661                 (SCNTL3_REG_800 << 16) | (scntl3 << 8);
1662             script[1] = 0;
1663             script += 2;
1664         }
1665 
1666         script[0] = ((DCMD_TYPE_RWRI | DCMD_RWRI_OPC_MODIFY |
1667             DCMD_RWRI_OP_MOVE) << 24) |
1668                 (SXFER_REG << 16) | (sxfer << 8);
1669         script[1] = 0;
1670         script += 2;
1671 
1672         script[0] = ((DCMD_TYPE_TCI|DCMD_TCI_OP_RETURN) << 24) | DBC_TCI_TRUE;
1673         script[1] = 0;
1674         script += 2;
1675     }
1676 }
1677 
1678 /* 
1679  * Function : static int NCR53c8x0_dstat_sir_intr (struct Scsi_Host *host,
1680  *      struct NCR53c7x0_cmd *cmd)
1681  *
1682  * Purpose :  Handler for INT generated instructions for the 
1683  *      NCR53c810/820 SCSI SCRIPT
1684  *
1685  * Inputs : host - pointer to this host adapter's structure,
1686  *      cmd - pointer to the command (if any) dsa was pointing 
1687  *      to.
1688  *
1689  */
1690 
1691 static int NCR53c8x0_dstat_sir_intr (struct Scsi_Host *host, struct 
     /* [previous][next][first][last][top][bottom][index][help] */
1692     NCR53c7x0_cmd *cmd) {
1693     NCR53c7x0_local_declare();
1694     Scsi_Cmnd *c = cmd ? cmd->cmd : NULL;
1695     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
1696         host->hostdata;         
1697     u32 dsps,*dsp;      /* Argument of the INT instruction */
1698     NCR53c7x0_local_setup(host);
1699     dsps = NCR53c7x0_read32(DSPS_REG);
1700     dsp = bus_to_virt(NCR53c7x0_read32(DSP_REG));
1701 
1702     if (hostdata->options & OPTION_DEBUG_INTR) 
1703         printk ("scsi%d : DSPS = 0x%x\n", host->host_no, dsps);
1704 
1705     switch (dsps) {
1706     case A_int_msg_1:
1707         printk ("scsi%d : message", host->host_no);
1708         if (cmd) 
1709             printk (" from target %d lun %d", c->target, c->lun);
1710         print_msg ((unsigned char *) hostdata->msg_buf);
1711         printk("\n");
1712         switch (hostdata->msg_buf[0]) {
1713         /* 
1714          * Unless we've initiated synchronous negotiation, I don't
1715          * think that this should happen.
1716          */
1717         case MESSAGE_REJECT:
1718             hostdata->dsp = hostdata->script + hostdata->E_accept_message /
1719                 sizeof(u32);
1720             hostdata->dsp_changed = 1;
1721             break;
1722         case INITIATE_RECOVERY:
1723             printk ("scsi%d : extended contingent allegiance not supported yet, rejecting\n",
1724                 host->host_no);
1725             hostdata->dsp = hostdata->script + hostdata->E_reject_message /
1726                 sizeof(u32);
1727             hostdata->dsp_changed = 1;
1728         }
1729         return SPECIFIC_INT_NOTHING;
1730     case A_int_msg_sdtr:
1731         if (cmd) {
1732             printk ("scsi%d : target %d %s synchronous transfer period %dns, offset%d\n",
1733                 host->host_no, c->target, (cmd->flags & CMD_FLAG_SDTR) ? "accepting" :
1734                 "requesting", hostdata->msg_buf[3] * 4, hostdata->msg_buf[4]);
1735         /* 
1736          * Initiator initiated, won't happen unless synchronous 
1737          *      transfers are enabled.  If we get a SDTR message in
1738          *      response to our SDTR, we should program our parameters
1739          *      such that 
1740          *              offset <= requested offset
1741          *              period >= requested period                      
1742          */
1743             if (cmd->flags & CMD_FLAG_SDTR) {
1744                 cmd->flags &= ~CMD_FLAG_SDTR; 
1745                 synchronous (host, c->target, (unsigned char *)
1746                     hostdata->msg_buf);
1747                 hostdata->dsp = hostdata->script + hostdata->E_accept_message /
1748                     sizeof(u32);
1749                 hostdata->dsp_changed = 1;
1750                 return SPECIFIC_INT_NOTHING;
1751             } else {
1752                 if (hostdata->options & OPTION_SYNCHRONOUS)  {
1753                     cmd->flags |= CMD_FLAG_DID_SDTR;
1754                     synchronous (host, c->target, (unsigned char *)
1755                         hostdata->msg_buf);
1756                 } else {
1757                     hostdata->msg_buf[4] = 0;           /* 0 offset = async */
1758                 }
1759 
1760                 patch_dsa_32 (cmd->dsa, dsa_msgout_other, 0, 5);
1761                 patch_dsa_32 (cmd->dsa, dsa_msgout_other, 1, 
1762                     virt_to_bus((void*)hostdata->msg_buf));
1763                 hostdata->dsp = hostdata->script + 
1764                 hostdata->E_respond_message / sizeof(u32);
1765                 hostdata->dsp_changed = 1;
1766             }
1767 
1768             if (hostdata->msg_buf[4]) {
1769                 int Hz = 1000000000 / (hostdata->msg_buf[3] * 4);
1770                 printk ("scsi%d : setting target %d to %d.%02dMhz %s SCSI%s\n"
1771                         "         period = %dns, max offset = %d\n",
1772                         host->host_no, c->target, Hz / 1000000, Hz % 1000000,
1773                         ((hostdata->msg_buf[3] < 200) ? "FAST " : 
1774                         "synchronous") ,
1775                         ((hostdata->msg_buf[3] < 200) ? "-II" : ""),
1776                         (int) hostdata->msg_buf[3] * 4, (int) 
1777                         hostdata->msg_buf[4]);
1778             } else {
1779                 printk ("scsi%d : setting target %d to asynchronous SCSI\n",
1780                     host->host_no, c->target);
1781             }
1782             return SPECIFIC_INT_NOTHING;
1783         }
1784         /* Fall through to abort */
1785     case A_int_msg_wdtr:
1786         hostdata->dsp = hostdata->script + hostdata->E_reject_message /
1787             sizeof(u32);
1788         hostdata->dsp_changed = 1;
1789         return SPECIFIC_INT_NOTHING;
1790     case A_int_err_unexpected_phase:
1791         if (hostdata->options & OPTION_DEBUG_INTR) 
1792             printk ("scsi%d : unexpected phase\n", host->host_no);
1793         return SPECIFIC_INT_ABORT;
1794     case A_int_err_selected:
1795         printk ("scsi%d : selected by target %d\n", host->host_no,
1796             (int) NCR53c7x0_read8(SSID_REG_800) &7);
1797         hostdata->dsp = hostdata->script + hostdata->E_target_abort / 
1798             sizeof(u32);
1799         hostdata->dsp_changed = 1;
1800         return SPECIFIC_INT_NOTHING;
1801     case A_int_err_unexpected_reselect:
1802         printk ("scsi%d : unexpected reselect by target %d\n", host->host_no,
1803             (int) NCR53c7x0_read8(SSID_REG_800));
1804         hostdata->dsp = hostdata->script + hostdata->E_initiator_abort /
1805             sizeof(u32);
1806         hostdata->dsp_changed = 1;
1807         return SPECIFIC_INT_NOTHING;
1808 /*
1809  * Since contingent allegiance conditions are cleared by the next 
1810  * command issued to a target, we must issue a REQUEST SENSE 
1811  * command after receiving a CHECK CONDITION status, before
1812  * another command is issued.
1813  * 
1814  * Since this NCR53c7x0_cmd will be freed after use, we don't 
1815  * care if we step on the various fields, so modify a few things.
1816  */
1817     case A_int_err_check_condition: 
1818 #if 0
1819         if (hostdata->options & OPTION_DEBUG_INTR) 
1820 #endif
1821             printk ("scsi%d : CHECK CONDITION\n", host->host_no);
1822         if (!c) {
1823             printk("scsi%d : CHECK CONDITION with no SCSI command\n",
1824                 host->host_no);
1825             return SPECIFIC_INT_PANIC;
1826         }
1827 
1828 /*
1829  * When a contingent allegiance condition is created, the target 
1830  * reverts to asynchronous transfers.
1831  */
1832 
1833         asynchronous (host, c->target);
1834 
1835         /* 
1836          * Use normal one-byte selection message, with no attempts to 
1837          * reestablish synchronous or wide messages since this may
1838          * be the crux of our problem.
1839          *
1840          * XXX - once SCSI-II tagged queuing is implemented, we'll
1841          *      have to set this up so that the rest of the DSA
1842          *      agrees with this being an untagged queue'd command.
1843          */
1844 
1845         patch_dsa_32 (cmd->dsa, dsa_msgout, 0, 1);
1846 
1847         /* 
1848          * Modify the table indirect for COMMAND OUT phase, since 
1849          * Request Sense is a six byte command.
1850          */
1851 
1852         patch_dsa_32 (cmd->dsa, dsa_cmdout, 0, 6);
1853 
1854         c->cmnd[0] = REQUEST_SENSE;
1855         c->cmnd[1] &= 0xe0;     /* Zero all but LUN */
1856         c->cmnd[2] = 0;
1857         c->cmnd[3] = 0;
1858         c->cmnd[4] = sizeof(c->sense_buffer);
1859         c->cmnd[5] = 0; 
1860 
1861         /*
1862          * Disable dataout phase, and program datain to transfer to the 
1863          * sense buffer, and add a jump to other_transfer after the 
1864          * command so overflow/underrun conditions are detected.
1865          */
1866 
1867         patch_dsa_32 (cmd->dsa, dsa_dataout, 0, hostdata->E_other_transfer);
1868         patch_dsa_32 (cmd->dsa, dsa_datain, 0, virt_to_bus(cmd->data_transfer_start));
1869         cmd->data_transfer_start[0] = (((DCMD_TYPE_BMI | DCMD_BMI_OP_MOVE_I | 
1870             DCMD_BMI_IO)) << 24) | sizeof(c->sense_buffer);
1871         cmd->data_transfer_start[1] = virt_to_bus(c->sense_buffer);
1872 
1873         cmd->data_transfer_start[2] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_JUMP) 
1874             << 24) | DBC_TCI_TRUE;
1875         cmd->data_transfer_start[3] = hostdata->E_other_transfer;
1876 
1877         /*
1878          * Currently, this command is flagged as completed, ie 
1879          * it has valid status and message data.  Reflag it as
1880          * incomplete.  Q - need to do something so that original
1881          * status, etc are used.
1882          */
1883 
1884         cmd->cmd->result = 0xffff;              
1885 
1886         /* 
1887          * Restart command as a REQUEST SENSE.
1888          */
1889         hostdata->dsp = hostdata->script + hostdata->E_select /
1890             sizeof(u32);
1891         hostdata->dsp_changed = 1;
1892         return SPECIFIC_INT_NOTHING;
1893     case A_int_debug_break:
1894         return SPECIFIC_INT_BREAK;
1895     case A_int_norm_aborted:
1896         hostdata->dsp = hostdata->script + hostdata->E_schedule / 
1897                 sizeof(u32);
1898         hostdata->dsp_changed = 1;
1899         if (cmd)
1900             abnormal_finished (cmd, DID_ERROR << 16);
1901         return SPECIFIC_INT_NOTHING;
1902     case A_int_test_1:
1903     case A_int_test_2:
1904         hostdata->idle = 1;
1905         hostdata->test_completed = (dsps - A_int_test_1) / 0x00010000 + 1;
1906         if (hostdata->options & OPTION_DEBUG_INTR)
1907             printk("scsi%d : test %d complete\n", host->host_no,
1908                 hostdata->test_completed);
1909         return SPECIFIC_INT_NOTHING;
1910 #ifdef A_int_debug_scheduled
1911     case A_int_debug_scheduled:
1912         if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
1913             printk("scsi%d : new I/O 0x%x scheduled\n", host->host_no,
1914                 NCR53c7x0_read32(DSA_REG));
1915         }
1916         return SPECIFIC_INT_RESTART;
1917 #endif
1918 #ifdef A_int_debug_idle
1919     case A_int_debug_idle:
1920         if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
1921             printk("scsi%d : idle\n", host->host_no);
1922         }
1923         return SPECIFIC_INT_RESTART;
1924 #endif
1925 #ifdef A_int_debug_cmd
1926     case A_int_debug_cmd:
1927         if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
1928             printk("scsi%d : command sent\n");
1929         }
1930     return SPECIFIC_INT_RESTART;
1931 #endif
1932 #ifdef A_int_debug_dsa_loaded
1933     case A_int_debug_dsa_loaded:
1934         if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
1935             printk("scsi%d : DSA loaded with 0x%x\n", host->host_no,
1936                 NCR53c7x0_read32(DSA_REG));
1937         }
1938         return SPECIFIC_INT_RESTART; 
1939 #endif
1940 #ifdef A_int_debug_reselected
1941     case A_int_debug_reselected:
1942         if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
1943             printk("scsi%d : reselected by target %d lun %d\n",
1944                 host->host_no, (int) NCR53c7x0_read8(SSID_REG_800), 
1945                 (int) hostdata->reselected_identify & 7);
1946         }
1947     return SPECIFIC_INT_RESTART;
1948 #endif
1949 #ifdef A_int_debug_head
1950     case A_int_debug_head:
1951         if (hostdata->options & (OPTION_DEBUG_SCRIPT|OPTION_DEBUG_INTR)) {
1952             printk("scsi%d : issue_dsa_head now 0x%x\n",
1953                 host->host_no, hostdata->issue_dsa_head);
1954         }
1955     return SPECIFIC_INT_RESTART;
1956 #endif
1957     default:
1958         if ((dsps & 0xff000000) == 0x03000000) {
1959              printk ("scsi%d : misc debug interrupt 0x%x\n",
1960                 host->host_no, dsps);
1961             return SPECIFIC_INT_RESTART;
1962         }
1963 
1964         printk ("scsi%d : unknown user interrupt 0x%x\n", 
1965             host->host_no, (unsigned) dsps);
1966         return SPECIFIC_INT_PANIC;
1967     }
1968 }
1969 
1970 /* 
1971  * XXX - the stock NCR assembler won't output the scriptu.h file,
1972  * which undefine's all #define'd CPP symbols from the script.h
1973  * file, which will create problems if you use multiple scripts
1974  * with the same  symbol names.
1975  *
1976  * If you insist on using NCR's assembler, you could generate
1977  * scriptu.h from script.h using something like 
1978  *
1979  * grep #define script.h | \
1980  * sed 's/#define[      ][      ]*\([_a-zA-Z][_a-zA-Z0-9]*\).*$/#undefine \1/' \
1981  * > scriptu.h
1982  */
1983 
1984 #include "53c8xx_u.h"
1985 
1986 /* XXX - add alternate script handling code here */
1987 
1988 
1989 #ifdef NCR_DEBUG
1990 /*
1991  * Debugging without a debugger is no fun. So, I've provided 
1992  * a debugging interface in the NCR53c7x0 driver.  To avoid
1993  * kernel cruft, there's just enough here to act as an interface
1994  * to a user level debugger (aka, GDB).
1995  *
1996  *
1997  * The following restrictions apply to debugger commands : 
1998  * 1.  The command must be terminated by a newline.
1999  * 2.  Command length must be less than 80 bytes including the 
2000  *      newline.
2001  * 3.  The entire command must be written with one system call.
2002  */
2003 
2004 static const char debugger_help = 
2005 "bc <addr>                      - clear breakpoint\n"
2006 "bl                             - list breakpoints\n"
2007 "bs <addr>                      - set breakpoint\n"
2008 "g                              - start\n"                              
2009 "h                              - halt\n"
2010 "?                              - this message\n"
2011 "i                              - info\n"
2012 "mp <addr> <size>               - print memory\n"
2013 "ms <addr> <size> <value>       - store memory\n"
2014 "rp <num> <size>                - print register\n"
2015 "rs <num> <size> <value>        - store register\n"
2016 "s                              - single step\n"
2017 "tb                             - begin trace \n"
2018 "te                             - end trace\n";
2019 
2020 /*
2021  * Whenever we change a break point, we should probably 
2022  * set the NCR up so that it is in a single step mode.
2023  */
2024 
2025 static int debugger_fn_bc (struct Scsi_Host *host, struct debugger_token *token,
     /* [previous][next][first][last][top][bottom][index][help] */
2026     u32 args[]) {
2027     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
2028         instance->hostdata;
2029     struct NCR53c7x0_break *bp, **prev;
2030     unsigned long flags;
2031     save_flags(flags);
2032     cli();
2033     for (bp = (struct NCR53c7x0_break *) instance->breakpoints,
2034             prev = (struct NCR53c7x0_break **) &instance->breakpoints;
2035             bp; prev = (struct NCR53c7x0_break **) &(bp->next),
2036             bp = (struct NCR53c7x0_break *) bp->next);
2037 
2038     if (!bp) {
2039         restore_flags(flags);
2040         return -EIO;
2041     }
2042 
2043     /* 
2044      * XXX - we need to insure that the processor is halted 
2045      * here in order to prevent a race condition.
2046      */
2047     
2048     memcpy ((void *) bp->addr, (void *) bp->old, sizeof(bp->old));
2049     if (prev)
2050         *prev = bp->next;
2051 
2052     restore_flags(flags);
2053     return 0;
2054 }
2055 
2056 
2057 static int debugger_fn_bl (struct Scsi_Host *host, struct debugger_token *token,
     /* [previous][next][first][last][top][bottom][index][help] */
2058     u32 args[]) {
2059     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
2060         host->hostdata;
2061     struct NCR53c7x0_break *bp;
2062     char buf[80];
2063     size_t len;
2064     unsigned long flags;
2065     /* 
2066      * XXX - we need to insure that the processor is halted 
2067      * here in order to prevent a race condition.  So, if the 
2068      * processor isn't halted, print an error message and continue.
2069      */
2070 
2071     sprintf (buf, "scsi%d : bp : warning : processor not halted\b",
2072         host->host_no);
2073     debugger_kernel_write (host, buf, strlen(buf));
2074 
2075     save_flags(flags);
2076     cli();
2077     for (bp = (struct NCR53c7x0_break *) host->breakpoints;
2078             bp; bp = (struct NCR53c7x0_break *) bp->next); {
2079             sprintf (buf, "scsi%d : bp : success : at %08x, replaces %08x %08x",
2080                 bp->addr, bp->old[0], bp->old[1]);
2081             len = strlen(buf);
2082             if ((bp->old[0] & (DCMD_TYPE_MASK << 24)) ==
2083                 (DCMD_TYPE_MMI << 24)) {
2084                 sprintf(buf + len, "%08x\n", * (u32 *) bp->addr);
2085             } else {
2086                 sprintf(buf + len, "\n");
2087             }
2088             len = strlen(buf);
2089             debugger_kernel_write (host, buf, len);
2090     }
2091     restore_flags(flags);
2092     return 0;
2093 }
2094 
2095 static int debugger_fn_bs (struct Scsi_Host *host, struct debugger_token *token,
     /* [previous][next][first][last][top][bottom][index][help] */
2096     u32 args[]) {
2097     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
2098         host->hostdata;
2099     struct NCR53c7x0_break *bp;
2100     char buf[80];
2101     size_t len;
2102     unsigned long flags;
2103 
2104     save_flags(flags);
2105     cli();
2106 
2107     if (hostdata->state != STATE_HALTED) {
2108         sprintf (buf, "scsi%d : bs : failure : NCR not halted\n", host->host_no);
2109         debugger_kernel_write (host, buf, strlen(buf));
2110         restore_flags(flags);
2111         return -1;
2112     }
2113 
2114     if (!(bp = kmalloc (sizeof (struct NCR53c7x0_break)))) {
2115         printk ("scsi%d : kmalloc(%d) of breakpoint structure failed, try again\n",
2116             host->host_no, sizeof(struct NCR53c7x0_break));
2117         restore_flags(flags);
2118         return -1;
2119     }
2120 
2121     bp->address = (u32 *) args[0];
2122     memcpy ((void *) bp->old_instruction, (void *) bp->address, 8);
2123     bp->old_size = (((bp->old_instruction[0] >> 24) & DCMD_TYPE_MASK) ==
2124         DCMD_TYPE_MMI ? 3 : 2);
2125     bp->next = hostdata->breakpoints;
2126     hostdata->breakpoints = bp->next;
2127     memcpy ((void *) bp->address, (void *) hostdata->E_debug_break, 8);
2128     
2129     restore_flags(flags);
2130     return 0;
2131 }
2132 
2133 #define TOKEN(name,nargs) {#name, nargs, debugger_fn_##name}
2134 static const struct debugger_token {
2135     char *name;
2136     int numargs;
2137     int (*fn)(struct debugger_token *token, u32 args[]);
2138 } debugger_tokens[] = {
2139     TOKEN(bc,1), TOKEN(bl,0), TOKEN(bs,1), TOKEN(g,0), TOKEN(halt,0),
2140     {DT_help, "?", 0} , TOKEN(h,0), TOKEN(i,0), TOKEN(mp,2), 
2141     TOKEN(ms,3), TOKEN(rp,2), TOKEN(rs,2), TOKEN(s,0), TOKEN(tb,0), TOKEN(te,0)
2142 };
2143 
2144 #define NDT sizeof(debugger_tokens / sizeof(struct debugger_token))
2145 
2146 static struct Scsi_Host * inode_to_host (struct inode *inode) {$
2147     int dev;
2148     struct Scsi_Host *tmp;
2149     for (dev = MINOR(inode->rdev), host = first_host;
2150         (host->hostt == the_template); --dev, host = host->next)
2151         if (!dev) return host;
2152     return NULL;
2153 }
2154 
2155 
2156 static debugger_user_write (struct inode *inode,struct file *filp,
     /* [previous][next][first][last][top][bottom][index][help] */
2157     char *buf,int count) {
2158     struct Scsi_Host *host;                     /* This SCSI host */
2159     struct NCR53c7x0_hostadata *hostdata;       
2160     char input_buf[80],                         /* Kernel space copy of buf */
2161         *ptr;                                   /* Pointer to argument list */
2162     u32 args[3];                                /* Arguments */
2163     int i, j, error, len;
2164 
2165     if (!(host = inode_to_host(inode)))
2166         return -ENXIO;
2167 
2168     hostdata = (struct NCR53c7x0_hostdata *) host->hostdata;
2169 
2170     if (error = verify_area(VERIFY_READ,buf,count))
2171         return error;
2172 
2173     if (count > 80) 
2174         return -EIO;
2175 
2176     memcpy_from_fs(input_buf, buf, count);
2177 
2178     if (input_buf[count - 1] != '\n')
2179         return -EIO;
2180 
2181     input_buf[count - 1]=0;
2182 
2183     for (i = 0; i < NDT; ++i) {
2184         len = strlen (debugger_tokens[i].name);
2185         if (!strncmp(input_buf, debugger_tokens[i].name, len)) 
2186             break;
2187     };
2188 
2189     if (i == NDT) 
2190         return -EIO;
2191 
2192     for (ptr = input_buf + len, j = 0; j < debugger_tokens[i].nargs && *ptr;) {
2193         if (*ptr == ' ' || *ptr == '\t') {
2194             ++ptr; 
2195         } else if (isdigit(*ptr)) {
2196             args[j++] = simple_strtoul (ptr, &ptr, 0);
2197         } else {
2198             return -EIO;
2199         } 
2200     }
2201 
2202     if (j != debugger_tokens[i].nargs)
2203         return -EIO;
2204 
2205     return count;
2206 } 
2207 
2208 static debugger_user_read (struct inode *inode,struct file *filp,
     /* [previous][next][first][last][top][bottom][index][help] */
2209     char *buf,int count) {
2210     struct Scsi_Host *instance;
2211     
2212 }
2213 
2214 static debugger_kernel_write (struct Scsi_Host *host, char *buf, size_t
     /* [previous][next][first][last][top][bottom][index][help] */
2215     buflen) {
2216     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
2217         host->hostdata;
2218     int copy, left;
2219     unsigned long flags;
2220     
2221     save_flags(flags);
2222     cli();
2223     while (buflen) {
2224         left = (hostdata->debug_buf + hostdata->debug_size - 1) -
2225             hostdata->debug_write;
2226         copy = (buflen <= left) ? buflen : left;
2227         memcpy (hostdata->debug_write, buf, copy);
2228         buf += copy;
2229         buflen -= copy;
2230         hostdata->debug_count += copy;
2231         if ((hostdata->debug_write += copy) == 
2232             (hostdata->debug_buf + hostdata->debug_size))
2233             hosdata->debug_write = hostdata->debug_buf;
2234     }
2235     restore_flags(flags);
2236 }
2237 
2238 #endif /* def NCRDEBUG */
2239 
2240 /* 
2241  * Function : static void NCR538xx_soft_reset (struct Scsi_Host *host)
2242  *
2243  * Purpose :  perform a soft reset of the NCR53c8xx chip
2244  *
2245  * Inputs : host - pointer to this host adapter's structure
2246  *
2247  * Preconditions : NCR53c7x0_init must have been called for this 
2248  *      host.
2249  * 
2250  */
2251 
2252 static void 
2253 NCR53c8x0_soft_reset (struct Scsi_Host *host) {
     /* [previous][next][first][last][top][bottom][index][help] */
2254     NCR53c7x0_local_declare();
2255     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
2256         host->hostdata;
2257     NCR53c7x0_local_setup(host);
2258 
2259 
2260     /*
2261      * Do a soft reset of the chip so that everything is 
2262      * reinitialized to the power-on state.
2263      *
2264      * Basically follow the procedure outlined in the NCR53c700
2265      * data manual under Chapter Six, How to Use, Steps Necessary to
2266      * Start SCRIPTS, with the exception of actually starting the 
2267      * script and setting up the synchronous transfer gunk.
2268      */
2269 
2270     NCR53c7x0_write8(ISTAT_REG_800, ISTAT_10_SRST);
2271     mb();
2272     NCR53c7x0_write8(ISTAT_REG_800, 0);
2273     mb();
2274     NCR53c7x0_write8(hostdata->dmode, hostdata->saved_dmode & ~DMODE_MAN);
2275 
2276 
2277     /* 
2278      * Respond to reselection by targets and use our _initiator_ SCSI ID 
2279      * for arbitration. If notyet, also respond to SCSI selection.
2280      *
2281      * XXX - Note : we must reprogram this when reselecting as 
2282      *  a target.
2283      */
2284 
2285 #ifdef notyet
2286     NCR53c7x0_write8(SCID_REG, (host->this_id & 7)|SCID_800_RRE|SCID_800_SRE);
2287 #else
2288     NCR53c7x0_write8(SCID_REG, (host->this_id & 7)|SCID_800_RRE);
2289 #endif
2290     NCR53c7x0_write8(RESPID_REG_800, hostdata->this_id_mask);
2291 
2292     /*
2293      * Use a maximum (1.6) second handshake to handshake timeout,
2294      * and SCSI recommended .5s selection timeout.
2295      */
2296 
2297     /*
2298      * The new gcc won't recognize preprocessing directives
2299      * within macro args.
2300      */
2301 #if 0
2302     NCR53c7x0_write8(STIME0_REG_800, 
2303         ((14 << STIME0_800_SEL_SHIFT) & STIME0_800_SEL_MASK) 
2304 /* Disable HTH interrupt */
2305         | ((15 << STIME0_800_HTH_SHIFT) & STIME0_800_HTH_MASK));
2306 #else
2307     NCR53c7x0_write8(STIME0_REG_800, 
2308         ((14 << STIME0_800_SEL_SHIFT) & STIME0_800_SEL_MASK));
2309 #endif
2310 
2311 
2312 
2313     /*
2314      * Enable all interrupts, except parity which we only want when
2315      * the user requests it.
2316      */
2317 
2318     NCR53c7x0_write8(DIEN_REG, DIEN_800_MDPE | DIEN_800_BF |
2319                 DIEN_ABRT | DIEN_SSI | DIEN_SIR | DIEN_800_IID);
2320 
2321     
2322     NCR53c7x0_write8(SIEN0_REG_800, ((hostdata->options & OPTION_PARITY) ?
2323             SIEN_PAR : 0) | SIEN_RST | SIEN_UDC | SIEN_SGE | SIEN_MA);
2324     NCR53c7x0_write8(SIEN1_REG_800, SIEN1_800_STO | SIEN1_800_HTH);
2325 
2326     /* 
2327      * Use saved clock frequency divisor and scripts loaded in 16 bit
2328      * mode flags from the saved dcntl.
2329      */
2330 
2331     NCR53c7x0_write8(DCNTL_REG, hostdata->saved_dcntl);
2332     NCR53c7x0_write8(CTEST4_REG_800, hostdata->saved_ctest4);
2333 
2334     /* Enable active negation */
2335     NCR53c7x0_write8(STEST3_REG_800, STEST3_800_TE);
2336 
2337     mb();
2338 }
2339 
2340 /*
2341  * Function static struct NCR53c7x0_cmd *create_cmd (Scsi_Cmnd *cmd) 
2342  *
2343  * Purpose : If we have not already allocated enough NCR53c7x0_cmd
2344  *      structures to satisfy any allowable number of simultaneous 
2345  *      commands for this host; do so (using either scsi_malloc()
2346  *      or kmalloc() depending on configuration), and add them to the 
2347  *      hostdata free list.  Take the first structure off the free list, 
2348  *      initialize it based on the Scsi_Cmnd structure passed in, 
2349  *      including dsa and Linux field initialization, and dsa code relocation.
2350  *
2351  * Inputs : cmd - SCSI command
2352  *
2353  * Returns : NCR53c7x0_cmd structure corresponding to cmd,
2354  *      NULL on failure.
2355  */
2356 
2357 static struct NCR53c7x0_cmd *
2358 create_cmd (Scsi_Cmnd *cmd) {
     /* [previous][next][first][last][top][bottom][index][help] */
2359     NCR53c7x0_local_declare();
2360     struct Scsi_Host *host = cmd->host;
2361     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
2362         host->hostdata; 
2363     struct NCR53c7x0_cmd *tmp = NULL;   /* NCR53c7x0_cmd structure for this command */
2364     int datain,                 /* Number of instructions per phase */
2365         dataout;
2366     int data_transfer_instructions, /* Count of dynamic instructions */
2367         i;                      /* Counter */
2368     u32 *cmd_datain,            /* Address of datain/dataout code */
2369         *cmd_dataout;           /* Incremented as we assemble */
2370 #ifdef notyet
2371     void *real;                 /* Real address */
2372     int size;                   /* Size of *tmp */
2373     int alignment;              /* Alignment adjustment (0 - sizeof(long)-1) */
2374 #endif
2375     unsigned long flags;
2376     NCR53c7x0_local_setup(cmd->host);
2377 
2378 /* FIXME : when we start doing multiple simultaneous commands per LUN, 
2379    we will need to either
2380         - Do an attach_slave() and detach_slave() the right way (allocate
2381           memory in attach_slave() as we do in scsi_register).
2382         - Make sure this code works
2383     with the former being cleaner.  At the same time, we can also go with
2384     a per-device host_scribble, and introduce a NCR53c7x0_device structure
2385     to replace the messy fixed length arrays we're starting to use. */
2386 
2387 #ifdef notyet
2388 
2389     if (hostdata->num_commands < host->can_queue &&
2390         !in_scan_scsis && 
2391         !(hostdata->cmd_allocated[cmd->target] & (1 << cmd->lun))) {
2392         for (i = host->hostt->cmd_per_lun - 1; i >= 0  --i) {
2393 #ifdef SCSI_MALLOC
2394     /* scsi_malloc must allocate with a 512 byte granularity, but always
2395        returns buffers which are aligned on a 512 boundary */
2396             size = (hostdata->max_cmd_size + 511) / 512 * 512;
2397             tmp = (struct NCR53c7x0_cmd *) scsi_malloc (size);
2398             if (!tmp)
2399                 break;
2400             tmp->real = (void *) tmp; 
2401 #else
2402     /* kmalloc() can allocate any size, but historically has returned 
2403        unaligned addresses, so we need to allow for alignment */
2404             size = hostdata->max_cmd_size + sizeof(void*);
2405             real = kmalloc (size, GFP_ATOMIC);
2406             alignment = sizeof(void*) - (((unsigned) real) & (sizeof(void*)-1));
2407             tmp = (struct NCR53c7x0_cmd *) (((char *) real) + alignment);
2408             if (!tmp)
2409                 break;
2410             tmp->real = real;
2411 #endif /* def SCSI_MALLOC */
2412             tmp->size = size;                   
2413             /* Insert all but last into list */
2414             if (i > 0) {
2415                 tmp->next = hostdata->free;
2416                 hostdata->free = tmp;
2417             }
2418         }
2419     }
2420 #endif /* def notyet */
2421     if (!tmp) {
2422         save_flags(flags);
2423         cli();
2424         tmp = (struct NCR53c7x0_cmd *) hostdata->free;
2425         if (tmp) {
2426             hostdata->free = tmp->next;
2427             restore_flags(flags);
2428         } else {
2429             restore_flags(flags);
2430             return NULL;
2431         }
2432     }
2433 
2434     /*
2435      * Decide whether we need to generate commands for DATA IN,
2436      * DATA OUT, neither, or both based on the SCSI command 
2437      */
2438 
2439     switch (cmd->cmnd[0]) {
2440     /* These commands do DATA IN */
2441     case INQUIRY:
2442     case MODE_SENSE:
2443     case READ_6:
2444     case READ_10:
2445     case READ_CAPACITY:
2446     case REQUEST_SENSE:
2447         datain = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3;
2448         dataout = 0;
2449         break;
2450     /* These commands do DATA OUT */
2451     case MODE_SELECT: 
2452     case WRITE_6:
2453     case WRITE_10:
2454 #if 0
2455         printk("scsi%d : command is ", host->host_no);
2456         print_command(cmd->cmnd);
2457 #endif
2458 #if 0
2459         printk ("scsi%d : %d scatter/gather segments\n", host->host_no,
2460             cmd->use_sg);
2461 #endif
2462         datain = 0;
2463         dataout = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3;
2464 #if 0
2465         hostdata->options |= OPTION_DEBUG_INTR;
2466 #endif
2467         break;
2468     /* 
2469      * These commands do no data transfer, we should force an
2470      * interrupt if a data phase is attempted on them.
2471      */
2472     case START_STOP:
2473     case TEST_UNIT_READY:
2474         datain = dataout = 0;
2475         break;
2476     /*
2477      * We don't know about these commands, so generate code to handle
2478      * both DATA IN and DATA OUT phases.
2479      */
2480     default:
2481         datain = dataout = 2 * (cmd->use_sg ? cmd->use_sg : 1) + 3;
2482     }
2483 
2484     /* 
2485      * For each data phase implemented, we need a JUMP instruction
2486      * to return control to other_transfer.  We also need a MOVE
2487      * and a CALL instruction for each scatter/gather segment.
2488      */
2489 
2490     data_transfer_instructions = datain + dataout;
2491 
2492     /*
2493      * When we perform a request sense, we overwrite various things,
2494      * including the data transfer code.  Make sure we have enough
2495      * space to do that.
2496      */
2497 
2498     if (data_transfer_instructions < 2)
2499         data_transfer_instructions = 2;
2500 
2501     /*
2502      * Initialize Linux specific fields.
2503      */
2504 
2505     tmp->cmd = cmd;
2506     tmp->next = NULL;
2507     tmp->prev = NULL;
2508 
2509     /* 
2510      * Calculate addresses of dynamic code to fill in DSA
2511      */
2512 
2513     tmp->data_transfer_start = tmp->dsa + (hostdata->dsa_end - 
2514         hostdata->dsa_start) / sizeof(u32);
2515     tmp->data_transfer_end = tmp->data_transfer_start + 
2516         2 * data_transfer_instructions;
2517 
2518     cmd_datain = datain ? tmp->data_transfer_start : NULL;
2519     cmd_dataout = dataout ? (datain ? cmd_datain + 2 * datain : tmp->
2520         data_transfer_start) : NULL;
2521 
2522     /*
2523      * Fill in the NCR53c7x0_cmd structure as follows
2524      * dsa, with fixed up DSA code
2525      * datain code
2526      * dataout code
2527      */
2528 
2529     /* Copy template code into dsa and perform all necessary fixups */
2530     if (hostdata->dsa_fixup)
2531         hostdata->dsa_fixup(tmp);
2532 
2533     patch_dsa_32(tmp->dsa, dsa_next, 0, 0);
2534     patch_dsa_32(tmp->dsa, dsa_cmnd, 0, virt_to_bus(cmd));
2535     patch_dsa_32(tmp->dsa, dsa_select, 0, hostdata->sync[cmd->target].
2536         select_indirect);
2537     /*
2538      * XXX - we need to figure this size based on whether
2539      * or not we'll be using any additional messages.
2540      */
2541     patch_dsa_32(tmp->dsa, dsa_msgout, 0, 1);
2542 #if 0
2543     tmp->select[0] = IDENTIFY (1, cmd->lun);
2544 #else
2545     tmp->select[0] = IDENTIFY (0, cmd->lun);
2546 #endif
2547     patch_dsa_32(tmp->dsa, dsa_msgout, 1, virt_to_bus(tmp->select));
2548     patch_dsa_32(tmp->dsa, dsa_cmdout, 0, cmd->cmd_len);
2549     patch_dsa_32(tmp->dsa, dsa_cmdout, 1, virt_to_bus(cmd->cmnd));
2550     patch_dsa_32(tmp->dsa, dsa_dataout, 0, cmd_dataout ?
2551         virt_to_bus(cmd_dataout) : virt_to_bus(hostdata->script) + hostdata->E_other_transfer);
2552     patch_dsa_32(tmp->dsa, dsa_datain, 0, cmd_datain ?
2553         virt_to_bus(cmd_datain) : virt_to_bus(hostdata->script) + hostdata->E_other_transfer);
2554     /* 
2555      * XXX - need to make endian aware, should use separate variables
2556      * for both status and message bytes.
2557      */
2558     patch_dsa_32(tmp->dsa, dsa_msgin, 0, 1);
2559     patch_dsa_32(tmp->dsa, dsa_msgin, 1, virt_to_bus(&cmd->result) + 1);
2560     patch_dsa_32(tmp->dsa, dsa_status, 0, 1);
2561     patch_dsa_32(tmp->dsa, dsa_status, 1, virt_to_bus(&cmd->result));
2562     patch_dsa_32(tmp->dsa, dsa_msgout_other, 0, 1);
2563     patch_dsa_32(tmp->dsa, dsa_msgout_other, 1, 
2564         virt_to_bus(&hostdata->NCR53c7xx_msg_nop));
2565 
2566     
2567     /*
2568      * Generate code for zero or more of the DATA IN, DATA OUT phases 
2569      * in the format 
2570      *
2571      * MOVE first buffer length, first buffer address, WHEN phase
2572      * CALL msgin, WHEN MSG_IN 
2573      * ...
2574      * MOVE last buffer length, last buffer address, WHEN phase
2575      * JUMP other_transfer
2576      */
2577 
2578 /* See if we're getting to data transfer */
2579 #if 0
2580     if (datain) {
2581         cmd_datain[0] = 0x98080000;
2582         cmd_datain[1] = 0x03ffd00d;
2583         cmd_datain += 2;
2584     }
2585 #endif
2586 
2587 /* 
2588  * XXX - I'm undecided whether all of this nonsense is faster
2589  * in the long run, or whether I should just go and implement a loop
2590  * on the NCR chip using table indirect mode?
2591  *
2592  * In any case, this is how it _must_ be done for 53c700/700-66 chips,
2593  * so this stays even when we come up with something better.
2594  *
2595  * When we're limited to 1 simultaneous command, no overlapping processing,
2596  * we're seeing 630K/sec, with 7% CPU usage on a slow Syquest 45M
2597  * drive.
2598  *
2599  * Not bad, not good. We'll see.
2600  */
2601 
2602     for (i = 0; cmd->use_sg ? (i < cmd->use_sg) : !i; cmd_datain += 4, 
2603         cmd_dataout += 4, ++i) {
2604         u32 buf = cmd->use_sg ?
2605             virt_to_bus(((struct scatterlist *)cmd->buffer)[i].address) :
2606             virt_to_bus(cmd->request_buffer);
2607         u32 count = cmd->use_sg ?
2608             ((struct scatterlist *)cmd->buffer)[i].length :
2609             cmd->request_bufflen;
2610 
2611         if (datain) {
2612             cmd_datain[0] = ((DCMD_TYPE_BMI | DCMD_BMI_OP_MOVE_I | DCMD_BMI_IO) 
2613                 << 24) | count;
2614             cmd_datain[1] = buf;
2615             cmd_datain[2] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_CALL | 
2616                 DCMD_TCI_CD | DCMD_TCI_IO | DCMD_TCI_MSG) << 24) | 
2617                 DBC_TCI_WAIT_FOR_VALID | DBC_TCI_COMPARE_PHASE | DBC_TCI_TRUE;
2618             cmd_datain[3] = virt_to_bus(hostdata->script) +
2619                 hostdata->E_msg_in;
2620 #if 0
2621             print_insn (host, cmd_datain, "dynamic ", 1);
2622             print_insn (host, cmd_datain + 2, "dynamic ", 1);
2623 #endif
2624         }
2625         if (dataout) {
2626             cmd_dataout[0] = ((DCMD_TYPE_BMI | DCMD_BMI_OP_MOVE_I) << 24) 
2627                 | count;
2628             cmd_dataout[1] = buf;
2629             cmd_dataout[2] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_CALL | 
2630                 DCMD_TCI_CD | DCMD_TCI_IO | DCMD_TCI_MSG) << 24) | 
2631                 DBC_TCI_WAIT_FOR_VALID | DBC_TCI_COMPARE_PHASE | DBC_TCI_TRUE;
2632             cmd_dataout[3] = virt_to_bus(hostdata->script) +
2633                 hostdata->E_msg_in;
2634 #if 0
2635             print_insn (host, cmd_dataout, "dynamic ", 1);
2636             print_insn (host, cmd_dataout + 2, "dynamic ", 1);
2637 #endif
2638         }
2639     }
2640 
2641     /*
2642      * Install JUMP instructions after the data transfer routines to return
2643      * control to the do_other_transfer routines.
2644      */
2645   
2646     
2647     if (datain) {
2648         cmd_datain[0] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_JUMP) << 24) |
2649             DBC_TCI_TRUE;
2650         cmd_datain[1] = virt_to_bus(hostdata->script) +
2651             hostdata->E_other_transfer;
2652 #if 0
2653         print_insn (host, cmd_datain, "dynamic jump ", 1);
2654 #endif
2655         cmd_datain += 2; 
2656     }
2657 #if 0
2658     if (datain) {
2659         cmd_datain[0] = 0x98080000;
2660         cmd_datain[1] = 0x03ffdeed;
2661         cmd_datain += 2;
2662     }
2663 #endif
2664 
2665 
2666     if (dataout) {
2667         cmd_dataout[0] = ((DCMD_TYPE_TCI | DCMD_TCI_OP_JUMP) << 24) |
2668             DBC_TCI_TRUE;
2669         cmd_dataout[1] = virt_to_bus(hostdata->script) +
2670             hostdata->E_other_transfer;
2671 #if 0
2672         print_insn (host, cmd_dataout, "dynamic jump ", 1);
2673 #endif
2674         cmd_dataout += 2;
2675     }
2676 
2677 
2678     return tmp;
2679 }
2680     
2681 /* 
2682  * Function : int NCR53c7xx_queue_command (Scsi_Cmnd *cmd,
2683  *      void (*done)(Scsi_Cmnd *)) 
2684  *
2685  * Purpose :  enqueues a SCSI command
2686  *
2687  * Inputs : cmd - SCSI command, done - function called on completion, with
2688  *      a pointer to the command descriptor.
2689  * 
2690  * Returns : 0
2691  *
2692  * Side effects : 
2693  *      cmd is added to the per instance issue_queue, with minor 
2694  *      twiddling done to the host specific fields of cmd.  If the 
2695  *      main coroutine is not running, it is restarted.
2696  *
2697  */
2698 
2699 int NCR53c7xx_queue_command (Scsi_Cmnd *cmd, void (* done)(Scsi_Cmnd *)) {
     /* [previous][next][first][last][top][bottom][index][help] */
2700     NCR53c7x0_local_declare();
2701     struct NCR53c7x0_cmd *tmp;
2702     struct Scsi_Host *host = cmd->host;
2703     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
2704         host->hostdata;
2705     unsigned long flags;
2706     unsigned char target_was_busy;
2707     NCR53c7x0_local_setup(host);
2708     
2709     if (((hostdata->options & (OPTION_DEBUG_INIT_ONLY|OPTION_DEBUG_PROBE_ONLY)) ||
2710         ((hostdata->options & OPTION_DEBUG_TARGET_LIMIT) &&
2711         !(hostdata->debug_lun_limit[cmd->target] & (1 << cmd->lun)))) ||
2712         cmd->target > 7) {
2713         printk("scsi%d : disabled target %d lun %d\n", host->host_no,
2714             cmd->target, cmd->lun);
2715         cmd->result = (DID_BAD_TARGET << 16);
2716         done(cmd);
2717         return 0;
2718     }
2719 
2720     if (hostdata->options & OPTION_DEBUG_NCOMMANDS_LIMIT) {
2721         if (hostdata->debug_count_limit == 0) {
2722             printk("scsi%d : maximum commands exceeded\n", host->host_no);
2723             cmd->result = (DID_BAD_TARGET << 16);
2724             done(cmd);
2725             return 0;
2726         } else if (hostdata->debug_count_limit != -1) 
2727             --hostdata->debug_count_limit;
2728     }
2729    
2730     if (hostdata->options & OPTION_DEBUG_READ_ONLY) {
2731         switch (cmd->cmnd[0]) {
2732         case WRITE_6:
2733         case WRITE_10:
2734             printk("scsi%d : WRITE attempted with NO_WRITE debugging flag set\n",
2735                 host->host_no);
2736             cmd->result = (DID_BAD_TARGET << 16);
2737             done(cmd);
2738             return 0;
2739         }
2740     }
2741 
2742     cmd->scsi_done = done;
2743     cmd->result = 0xffff;               /* The NCR will overwrite message
2744                                            and status with valid data */
2745     
2746     cmd->host_scribble = (unsigned char *) tmp = create_cmd (cmd);
2747 
2748     /*
2749      * On NCR53c710 and better chips, we have two issue queues : 
2750      * The queue maintained by the Linux driver, and the queue 
2751      * maintained by the NCR chip.
2752      * 
2753      * The Linux queue includes commands which have been generated,
2754      * but may be unable to execute because the device is busy, 
2755      * where as the NCR queue contains commands to issue as soon
2756      * as BUS FREE is detected.
2757      *
2758      * NCR53c700 and NCR53c700-66 chips use only the Linux driver
2759      * queue. 
2760      * 
2761      * So, insert into the Linux queue if the device is busy or 
2762      * we are running on an old chip, otherwise insert directly into
2763      * the NCR queue.
2764      */
2765     
2766     /*
2767      * REQUEST sense commands need to be executed before all other 
2768      * commands since any command will clear the contingent allegiance 
2769      * condition that exists and the sense data is only guaranteed to be 
2770      * valid while the condition exists.
2771      */
2772 
2773     save_flags(flags);
2774     cli();
2775 
2776     /* 
2777      * Consider a target busy if there are _any_ commands running
2778      * on it.  
2779      * XXX - Once we do SCSI-II tagged queuing, we want to use 
2780      *     a different definition of busy.
2781      */
2782         
2783     target_was_busy = hostdata->busy[cmd->target][cmd->lun]
2784 #ifdef LUN_BUSY
2785         ++
2786 #endif
2787 ; 
2788 
2789     if (!(hostdata->options & OPTION_700)  &&
2790         !target_was_busy) {
2791         unsigned char *dsa = ((unsigned char *) tmp->dsa)
2792                 - hostdata->dsa_start;  
2793                 /* dsa start is negative, so subtraction is used */
2794 #if 0   
2795         printk("scsi%d : new dsa is 0x%p\n", host->host_no, dsa);
2796 #endif
2797 
2798         if (hostdata->running_list)
2799             hostdata->running_list->prev = tmp;
2800 
2801         tmp->next = (struct NCR53c7x0_cmd*) hostdata->running_list;
2802 
2803         if (!hostdata->running_list)
2804             hostdata->running_list = (struct NCR53c7x0_cmd*) tmp;
2805         
2806 
2807         if (hostdata->idle) {
2808             hostdata->idle = 0;
2809             hostdata->state = STATE_RUNNING;
2810             NCR53c7x0_write32 (DSP_REG,  virt_to_bus(hostdata->script) +
2811                 hostdata->E_schedule);
2812             mb();
2813         }
2814 
2815 /* XXX - make function */
2816         for (;;) {
2817             /* 
2818              * If the NCR doesn't have any commands waiting in its
2819              * issue queue, then we simply create a new issue queue,
2820              * and signal the NCR that we have more commands.
2821              */
2822                 
2823             if (!hostdata->issue_dsa_head) {
2824 #if 0
2825                 printk ("scsi%d : no issue queue\n", host->host_no);
2826 #endif
2827                 hostdata->issue_dsa_tail = (u32 *) dsa;
2828                 hostdata->issue_dsa_head = virt_to_bus(dsa);
2829                 NCR53c7x0_write8(hostdata->istat, 
2830                     NCR53c7x0_read8(hostdata->istat) | ISTAT_10_SIGP);
2831                 mb();
2832                 break;
2833             /*
2834              * Otherwise, we blindly perform an atomic write 
2835              * to the next pointer of the last command we 
2836              * placed in that queue.
2837              *
2838              * Looks like it doesn't work, but I think it does - 
2839              */
2840             } else {
2841                 printk ("scsi%d : existing issue queue\n", host->host_no);
2842                 hostdata->issue_dsa_tail[hostdata->dsa_next/sizeof(u32)]
2843                   = virt_to_bus(dsa);
2844                 hostdata->issue_dsa_tail = (u32 *) dsa;
2845             /*
2846              * After which, one of two things will happen : 
2847              * The NCR will have scheduled a command, either this
2848              * one, or the next one.  In this case, we successfully
2849              * added our command to the queue.
2850              *
2851              * The NCR will have written the hostdata->issue_dsa_head
2852              * pointer with the NULL pointer terminating the list,
2853              * in which case we were too late.  If this happens,
2854              * we restart
2855              */
2856                 if (hostdata->issue_dsa_head)
2857                     break;
2858             }
2859         }
2860 /* XXX - end */
2861     } else {
2862 #if 1
2863         printk ("scsi%d : using issue_queue instead of issue_dsa_head!\n",
2864             host->host_no);
2865 #endif
2866         for (tmp = (struct NCR53c7x0_cmd *) hostdata->issue_queue; 
2867             tmp->next; tmp = (struct NCR53c7x0_cmd *) tmp->next);
2868         tmp->next = tmp;
2869     }
2870     restore_flags(flags);
2871     return 0;
2872 }
2873 
2874 
2875 int fix_pointers (u32 dsa) {
     /* [previous][next][first][last][top][bottom][index][help] */
2876     return 0;
2877 }
2878 
2879 /*
2880  * Function : static void intr_scsi (struct Scsi_Host *host, 
2881  *      struct NCR53c7x0_cmd *cmd)
2882  *
2883  * Purpose : handle all SCSI interrupts, indicated by the setting 
2884  *      of the SIP bit in the ISTAT register.
2885  *
2886  * Inputs : host, cmd - host and NCR command causing the interrupt, cmd
2887  *      may be NULL.
2888  */
2889 
2890 static void intr_scsi (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd) {
     /* [previous][next][first][last][top][bottom][index][help] */
2891     NCR53c7x0_local_declare();
2892     struct NCR53c7x0_hostdata *hostdata = 
2893         (struct NCR53c7x0_hostdata *) host->hostdata;
2894     unsigned char sstat0_sist0, sist1,          /* Registers */
2895             fatal;                              /* Did a fatal interrupt 
2896                                                    occur ? */
2897     int is_8xx_chip;
2898     NCR53c7x0_local_setup(host);
2899 
2900     fatal = 0;
2901   
2902     is_8xx_chip = ((unsigned) (hostdata->chip - 800)) < 100;
2903     if (is_8xx_chip) {
2904         sstat0_sist0 = NCR53c7x0_read8(SIST0_REG_800);
2905         udelay(1);
2906         sist1 = NCR53c7x0_read8(SIST1_REG_800);
2907     } else {
2908         sstat0_sist0 = NCR53c7x0_read8(SSTAT0_REG);
2909         sist1 = 0;
2910     }
2911 
2912     if (hostdata->options & OPTION_DEBUG_INTR) 
2913         printk ("scsi%d : SIST0 0x%0x, SIST1 0x%0x\n", host->host_no,
2914             sstat0_sist0, sist1);
2915 
2916     /* selection timeout */
2917     if ((is_8xx_chip && (sist1 & SIST1_800_STO)) ||
2918         (!is_8xx_chip && (sstat0_sist0 & SSTAT0_700_STO))) {
2919         fatal = 1;
2920         if (hostdata->options & OPTION_DEBUG_INTR) {
2921             printk ("scsi%d : Selection Timeout\n", host->host_no);
2922             if (cmd) {
2923                 printk("scsi%d : target %d, lun %d, command ",
2924                     host->host_no, cmd->cmd->target, cmd->cmd->lun);
2925                 print_command (cmd->cmd->cmnd);
2926                 printk("scsi%d : dsp = 0x%x\n", host->host_no,
2927                     (unsigned) NCR53c7x0_read32(DSP_REG));
2928             } else {
2929                 printk("scsi%d : no command\n", host->host_no);
2930             }
2931         }
2932 /*
2933  * XXX - question : how do we want to handle the Illegal Instruction
2934  *      interrupt, which may occur before or after the Selection Timeout
2935  *      interrupt?
2936  */
2937 
2938         if (1) {
2939             hostdata->idle = 1;
2940             hostdata->expecting_sto = 0;
2941 
2942             if (hostdata->test_running) {
2943                 hostdata->test_running = 0;
2944                 hostdata->test_completed = 3;
2945             } else if (cmd) {
2946                 abnormal_finished(cmd, DID_BAD_TARGET << 16);
2947             }
2948 #if 0       
2949             hostdata->intrs = 0;
2950 #endif
2951         }
2952     } 
2953     
2954     if (sstat0_sist0 & SSTAT0_UDC) {
2955         fatal = 1;
2956         if (cmd) {
2957             printk("scsi%d : target %d lun %d unexpected disconnect\n",
2958                 host->host_no, cmd->cmd->target, cmd->cmd->lun);
2959             abnormal_finished(cmd, DID_ERROR << 16);
2960         }
2961         hostdata->dsp = hostdata->script + hostdata->E_schedule / 
2962             sizeof(u32);
2963         hostdata->dsp_changed = 1;
2964     /* SCSI PARITY error */
2965     } 
2966 
2967     if (sstat0_sist0 & SSTAT0_PAR) {
2968         fatal = 1;
2969         if (cmd && cmd->cmd) {
2970             printk("scsi%d : target %d lun %d parity error.\n",
2971                 host->host_no, cmd->cmd->target, cmd->cmd->lun);
2972             abnormal_finished (cmd, DID_PARITY << 16); 
2973         } else
2974             printk("scsi%d : parity error\n", host->host_no);
2975         /* Should send message out, parity error */
2976 
2977         /* XXX - Reduce synchronous transfer rate! */
2978         hostdata->dsp = hostdata->script + hostdata->E_initiator_abort /
2979             sizeof(u32);
2980         hostdata->dsp_changed = 1; 
2981     /* SCSI GROSS error */
2982     } 
2983 
2984     if (sstat0_sist0 & SSTAT0_SGE) {
2985         fatal = 1;
2986         printk("scsi%d : gross error\n", host->host_no);
2987         /* XXX Reduce synchronous transfer rate! */
2988         hostdata->dsp = hostdata->script + hostdata->E_initiator_abort /
2989             sizeof(u32);
2990         hostdata->dsp_changed = 1;
2991     /* Phase mismatch */
2992     } 
2993 
2994     if (sstat0_sist0 & SSTAT0_MA) {
2995         fatal = 1;
2996         if (hostdata->options & OPTION_DEBUG_INTR)
2997             printk ("scsi%d : SSTAT0_MA\n", host->host_no);
2998         intr_phase_mismatch (host, cmd);
2999     }
3000 
3001 #if 1
3002 /*
3003  * If a fatal SCSI interrupt occurs, we must insure that the DMA and
3004  * SCSI FIFOs were flushed.
3005  */
3006 
3007     if (fatal) {
3008         if (!hostdata->dstat_valid) {
3009             hostdata->dstat = NCR53c7x0_read8(DSTAT_REG);
3010             hostdata->dstat_valid = 1;
3011         }
3012 
3013 /* XXX - code check for 700/800 chips */
3014         if (!(hostdata->dstat & DSTAT_DFE)) {
3015             printk ("scsi%d : DMA FIFO not empty\n", host->host_no);
3016 #if 0
3017             if (NCR53c7x0_read8 (CTEST2_REG_800) & CTEST2_800_DDIR) {
3018                 NCR53c7x0_write8 (CTEST3_REG_800, CTEST3_800_FLF);
3019                 mb();
3020                 while (!((hostdata->dstat = NCR53c7x0_read8(DSTAT_REG)) &
3021                     DSTAT_DFE));
3022             } else 
3023 #endif
3024             {
3025                 NCR53c7x0_write8 (CTEST3_REG_800, CTEST3_800_CLF);
3026                 mb();
3027                 while (NCR53c7x0_read8 (CTEST3_REG_800) & CTEST3_800_CLF);
3028             }
3029         }
3030 
3031         NCR53c7x0_write8 (STEST3_REG_800, STEST3_800_CSF);
3032         mb();
3033         while (NCR53c7x0_read8 (STEST3_REG_800) & STEST3_800_CSF);
3034     }
3035 #endif
3036 }
3037 
3038 /*
3039  * Function : static void NCR53c7x0_intr (int irq, struct pt_regs * regs)
3040  *
3041  * Purpose : handle NCR53c7x0 interrupts for all NCR devices sharing
3042  *      the same IRQ line.  
3043  * 
3044  * Inputs : Since we're using the SA_INTERRUPT interrupt handler
3045  *      semantics, irq indicates the interrupt which invoked 
3046  *      this handler.  
3047  */
3048 
3049 static void NCR53c7x0_intr (int irq, struct pt_regs * regs) {
     /* [previous][next][first][last][top][bottom][index][help] */
3050     NCR53c7x0_local_declare();
3051     struct Scsi_Host *host;                     /* Host we are looking at */
3052     unsigned char istat;                        /* Values of interrupt regs */
3053     struct NCR53c7x0_hostdata *hostdata;        /* host->hostdata */
3054     struct NCR53c7x0_cmd *cmd,                  /* command which halted */
3055         **cmd_prev_ptr;
3056     u32 *dsa;                                   /* DSA */
3057     int done = 1;                               /* Indicates when handler 
3058                                                    should terminate */
3059     int interrupted = 0;                        /* This HA generated 
3060                                                    an interrupt */
3061     unsigned long flags;
3062 
3063 #ifdef NCR_DEBUG
3064     char buf[80];                               /* Debugging sprintf buffer */
3065     size_t buflen;                              /* Length of same */
3066 #endif
3067 
3068 #if 0
3069     printk("interrupt %d received\n", irq);
3070 #endif
3071 
3072     do {
3073         done = 1;
3074         for (host = first_host; host; host = hostdata->next) {
3075             NCR53c7x0_local_setup(host);
3076 
3077             hostdata = (struct NCR53c7x0_hostdata *) host->hostdata;
3078             hostdata->dsp_changed = 0;
3079             interrupted = 0;
3080 
3081 
3082             do {
3083                 int is_8xx_chip;
3084 
3085                 hostdata->dstat_valid = 0;
3086                 interrupted = 0;
3087                 /*
3088                  * Only read istat once, since reading it again will unstack
3089                  * interrupts.
3090                  */
3091                 istat = NCR53c7x0_read8(hostdata->istat);
3092 
3093                 /*
3094                  * INTFLY interrupts are used by the NCR53c720, NCR53c810,
3095                  * and NCR53c820 to signify completion of a command.  Since 
3096                  * the SCSI processor continues running, we can't just look
3097                  * at the contents of the DSA register and continue running.
3098                  */
3099 /* XXX - this is getting big, and should move to intr_intfly() */
3100                 is_8xx_chip = ((unsigned) (hostdata->chip - 800)) < 100;
3101                 if ((hostdata->options & OPTION_INTFLY) && 
3102                     (is_8xx_chip && (istat & ISTAT_800_INTF))) {
3103                     char search_found = 0;      /* Got at least one ? */
3104                     done = 0;
3105                     interrupted = 1;
3106 
3107                     /* 
3108                      * Clear the INTF bit by writing a one.  This reset operation 
3109                      * is self-clearing.
3110                      */
3111                     NCR53c7x0_write8(hostdata->istat, istat|ISTAT_800_INTF);
3112                     mb();
3113 
3114                     if (hostdata->options & OPTION_DEBUG_INTR)
3115                         printk ("scsi%d : INTFLY\n", host->host_no); 
3116 
3117                     /*
3118                      * Traverse our list of running commands, and look
3119                      * for those with valid (non-0xff ff) status and message
3120                      * bytes encoded in the result which signify command
3121                      * completion.
3122                      */
3123 
3124 
3125                     save_flags(flags);
3126                     cli();
3127 restart:
3128                     for (cmd_prev_ptr = (struct NCR53c7x0_cmd **) 
3129                          &(hostdata->running_list), cmd = 
3130                          (struct NCR53c7x0_cmd *) hostdata->running_list; cmd ;
3131                          cmd_prev_ptr = (struct NCR53c7x0_cmd **) &(cmd->next), 
3132                          cmd = (struct NCR53c7x0_cmd *) cmd->next) {
3133                         Scsi_Cmnd *tmp;
3134 
3135                         if (!cmd) {
3136                             printk("scsi%d : very weird.\n", host->host_no);
3137                             break;
3138                         }
3139 
3140                         if (!(tmp = cmd->cmd)) {
3141                             printk("scsi%d : weird.  NCR53c7x0_cmd has no Scsi_Cmnd\n",
3142                                 host->host_no);
3143                                 continue;
3144                         }
3145 #if 0
3146                         printk ("scsi%d : looking at result of 0x%x\n",
3147                             host->host_no, cmd->cmd->result);
3148 #endif
3149                 
3150                         if (((tmp->result & 0xff) == 0xff) ||
3151                             ((tmp->result & 0xff00) == 0xff00))
3152                             continue;
3153 
3154                         search_found = 1;
3155 
3156                         /* Important - remove from list _before_ done is called */
3157                         /* XXX - SLL.  Seems like DLL is unnecessary */
3158                         if (cmd->prev)
3159                             cmd->prev->next = cmd->next;
3160                         if (cmd_prev_ptr)
3161                             *cmd_prev_ptr = (struct NCR53c7x0_cmd *) cmd->next;
3162 
3163 #ifdef LUN_BUSY
3164                         /* Check for next command for target, add to issue queue */
3165                         if (--hostdata->busy[tmp->target][tmp->lun]) {
3166                         }
3167 #endif
3168 
3169 
3170                         cmd->next = hostdata->free;
3171                         hostdata->free = cmd;
3172 
3173                         tmp->host_scribble = NULL;
3174 
3175                         if (hostdata->options & OPTION_DEBUG_INTR) {
3176                             printk ("scsi%d : command complete : pid %lu, id %d,lun %d result 0x%x ", 
3177                                 host->host_no, tmp->pid, tmp->target, tmp->lun, tmp->result);
3178                             print_command (tmp->cmnd);
3179                         }
3180 
3181                         
3182 #if 0
3183                         hostdata->options &= ~OPTION_DEBUG_INTR;
3184 #endif
3185                         tmp->scsi_done(tmp);
3186                         goto restart;
3187 
3188                     }
3189                     restore_flags(flags);
3190 
3191                     if (!search_found)  {
3192                         printk ("scsi%d : WARNING : INTFLY with no completed commands.\n",
3193                             host->host_no);
3194                     }
3195                 }
3196 
3197                 if (istat & (ISTAT_SIP|ISTAT_DIP)) {
3198                     done = 0;
3199                     interrupted = 1;
3200                     hostdata->state = STATE_HALTED;
3201                     /*
3202                      * NCR53c700 and NCR53c700-66 change the current SCSI
3203                      * process, hostdata->current_cmd, in the Linux driver so
3204                      * cmd = hostdata->current_cmd.
3205                      *
3206                      * With other chips, we must look through the commands
3207                      * executing and find the command structure which 
3208                      * corresponds to the DSA register.
3209                      */
3210 
3211                     if (hostdata->options & OPTION_700) {
3212                         cmd = (struct NCR53c7x0_cmd *) hostdata->current_cmd;
3213                     } else {
3214                         dsa = bus_to_virt(NCR53c7x0_read32(DSA_REG));
3215                         for (cmd = (struct NCR53c7x0_cmd *) 
3216                             hostdata->running_list; cmd &&
3217                             (dsa + (hostdata->dsa_start / sizeof(u32))) != 
3218                                 cmd->dsa;
3219                             cmd = (struct NCR53c7x0_cmd *)(cmd->next));
3220                     }
3221                     if (hostdata->options & OPTION_DEBUG_INTR) {
3222                         if (cmd) {
3223                             printk("scsi%d : interrupt for pid %lu, id %d, lun %d ", 
3224                                 host->host_no, cmd->cmd->pid, (int) cmd->cmd->target,
3225                                 (int) cmd->cmd->lun);
3226                             print_command (cmd->cmd->cmnd);
3227                         } else {
3228                             printk("scsi%d : no active command\n", host->host_no);
3229                         }
3230                     }
3231 
3232                     if (istat & ISTAT_SIP) {
3233                         if (hostdata->options & OPTION_DEBUG_INTR) 
3234                             printk ("scsi%d : ISTAT_SIP\n", host->host_no);
3235                         intr_scsi (host, cmd);
3236                     }
3237                 
3238                     if (istat & ISTAT_DIP) {
3239                         if (hostdata->options & OPTION_DEBUG_INTR) 
3240                             printk ("scsi%d : ISTAT_DIP\n", host->host_no);
3241                         intr_dma (host, cmd);
3242                     }
3243 
3244                     if (!hostdata->dstat_valid) {
3245                         hostdata->dstat = NCR53c7x0_read8(DSTAT_REG);
3246                         hostdata->dstat_valid = 1;
3247                     }
3248 
3249 #if 1
3250             /* XXX - code check for 700/800 chips */
3251                     if (!(hostdata->dstat & DSTAT_DFE)) {
3252                         printk ("scsi%d : DMA FIFO not empty\n", host->host_no);
3253             #if 0
3254                         if (NCR53c7x0_read8 (CTEST2_REG_800) & CTEST2_800_DDIR) {
3255                             NCR53c7x0_write8 (CTEST3_REG_800, CTEST3_800_FLF);
3256                             mb();
3257                             while (!((hostdata->dstat = NCR53c7x0_read8(DSTAT_REG)) &
3258                                 DSTAT_DFE));
3259                         } else 
3260             #endif
3261                         {
3262                             NCR53c7x0_write8 (CTEST3_REG_800, CTEST3_800_CLF);
3263                             mb();
3264                             while (NCR53c7x0_read8 (CTEST3_REG_800) & CTEST3_800_CLF);
3265                         }
3266                     }
3267 #endif
3268                 }
3269             } while (interrupted);
3270 
3271 
3272 
3273             if (hostdata->intrs != -1)
3274                 hostdata->intrs++;
3275 #if 0
3276             if (hostdata->intrs > 4) {
3277                 printk("scsi%d : too many interrupts, halting", host->host_no);
3278                 hostdata->idle = 1;
3279                 hostdata->options |= OPTION_DEBUG_INIT_ONLY;
3280                 panic("dying...\n");
3281             }
3282 #endif
3283 
3284             if (!hostdata->idle && hostdata->state == STATE_HALTED) {
3285                 if (!hostdata->dsp_changed) {
3286                     hostdata->dsp = bus_to_virt(NCR53c7x0_read32(DSP_REG));
3287                 }
3288                         
3289 #if 0
3290                 printk("scsi%d : new dsp is 0x%p\n", host->host_no, 
3291                     hostdata->dsp);
3292 #endif
3293                 
3294                 hostdata->state = STATE_RUNNING;
3295                 NCR53c7x0_write32 (DSP_REG, virt_to_bus(hostdata->dsp));
3296                 mb();
3297             }
3298         }
3299     } while (!done);
3300 }
3301 
3302 
3303 /* 
3304  * Function : static int abort_connected (struct Scsi_Host *host)
3305  *
3306  * Purpose : Assuming that the NCR SCSI processor is currently 
3307  *      halted, break the currently established nexus.  Clean
3308  *      up of the NCR53c7x0_cmd and Scsi_Cmnd structures should
3309  *      be done on receipt of the abort interrupt.
3310  *
3311  * Inputs : host - SCSI host
3312  *
3313  */
3314 
3315 static int 
3316 abort_connected (struct Scsi_Host *host) {
     /* [previous][next][first][last][top][bottom][index][help] */
3317     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
3318         host->hostdata;
3319 
3320     hostdata->dsp = hostdata->script + hostdata->E_initiator_abort /
3321         sizeof(u32);
3322     hostdata->dsp_changed = 1;
3323     printk ("scsi%d : DANGER : abort_connected() called \n",
3324         host->host_no);
3325 /* XXX - need to flag the command as aborted after the abort_connected
3326          code runs 
3327  */
3328     return 0;
3329 }
3330 
3331 
3332 /* 
3333  * Function : static void intr_phase_mismatch (struct Scsi_Host *host, 
3334  *      struct NCR53c7x0_cmd *cmd)
3335  *
3336  * Purpose : Handle phase mismatch interrupts
3337  *
3338  * Inputs : host, cmd - host and NCR command causing the interrupt, cmd
3339  *      may be NULL.
3340  *
3341  * Side effects : The abort_connected() routine is called or the NCR chip 
3342  *      is restarted, jumping to the command_complete entry point, or 
3343  *      patching the address and transfer count of the current instruction 
3344  *      and calling the msg_in entry point as appropriate.
3345  *
3346  */
3347 
3348 static void intr_phase_mismatch (struct Scsi_Host *host, struct NCR53c7x0_cmd
     /* [previous][next][first][last][top][bottom][index][help] */
3349     *cmd) {
3350     NCR53c7x0_local_declare();
3351     u32 dbc_dcmd, *dsp, *dsp_next;
3352     unsigned char dcmd, sbcl;
3353     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
3354         host->hostdata;
3355     const char *phase;
3356     NCR53c7x0_local_setup(host);
3357 
3358     if (!cmd) {
3359         printk ("scsi%d : phase mismatch interrupt occurred with no current command.\n",
3360             host->host_no);
3361         abort_connected(host);
3362         return;
3363     }
3364 
3365     /*
3366      * Corrective action is based on where in the SCSI SCRIPT(tm) the error 
3367      * occurred, as well as which SCSI phase we are currently in.
3368      */
3369 
3370     dsp_next = bus_to_virt(NCR53c7x0_read32(DSP_REG));
3371 
3372     /*
3373      * Like other processors, the NCR adjusts the DSP pointer before
3374      * instruction decode.  Set the DSP address back to what it should
3375      * be for this instruction based on its size (2 or 3 words).
3376      */
3377 
3378     dbc_dcmd = NCR53c7x0_read32(DBC_REG);
3379     dcmd = (dbc_dcmd & 0xff000000) >> 24;
3380     dsp = dsp_next - NCR53c7x0_insn_size(dcmd);
3381     
3382     /*
3383      * Read new SCSI phase from the SBCL lines.
3384      *
3385      * Note that since all of our code uses a WHEN conditional instead of an 
3386      * IF conditional, we don't need to wait for a valid REQ.
3387      */
3388     sbcl = NCR53c7x0_read8(SBCL_REG);
3389     switch (sbcl) {
3390     case SBCL_PHASE_DATAIN:
3391         phase = "DATAIN";
3392         break;
3393     case SBCL_PHASE_DATAOUT:
3394         phase = "DATAOUT";
3395         break;
3396     case SBCL_PHASE_MSGIN:
3397         phase = "MSGIN";
3398         break;
3399     case SBCL_PHASE_MSGOUT:
3400         phase = "MSGOUT";
3401         break;
3402     case SBCL_PHASE_CMDOUT:
3403         phase = "CMDOUT";
3404         break;
3405     case SBCL_PHASE_STATIN:
3406         phase = "STATUSIN";
3407         break;
3408     default:
3409         phase = "unknown";
3410         break;
3411     }
3412 
3413 
3414     /*
3415      * The way the SCSI SCRIPTS(tm) are architected, recoverable phase
3416      * mismatches should only occur in the data transfer routines, or
3417      * when a command is being aborted.  
3418      */
3419     if (dsp >= cmd->data_transfer_start && dsp < cmd->data_transfer_end) {
3420 
3421         /*
3422          * There are three instructions used in our data transfer routines with
3423          * a phase conditional on them
3424          *
3425          * 1.  MOVE count, address, WHEN DATA_IN
3426          * 2.  MOVE count, address, WHEN DATA_OUT
3427          * 3.  CALL msg_in, WHEN MSG_IN.
3428          */
3429         switch (sbcl & SBCL_PHASE_MASK) {
3430         /*
3431          * 1.  STATUS phase : pass control to command_complete as if 
3432          *     a JUMP instruction was executed.  No patches are made.
3433          */
3434         case SBCL_PHASE_STATIN:
3435             if (hostdata->options & OPTION_DEBUG_INTR) 
3436                 printk ("scsi%d : new phase = STATIN\n", host->host_no);
3437             hostdata->dsp = hostdata->script + hostdata->E_command_complete /
3438                 sizeof(u32);
3439             hostdata->dsp_changed = 1;
3440             return;
3441         /*
3442          * 2.  MSGIN phase : pass control to msg_in as if a CALL
3443          *     instruction was executed.  Patch current instruction.
3444          */
3445 /* 
3446  * XXX - This is buggy.
3447  */
3448         case SBCL_PHASE_MSGIN:
3449             if (hostdata->options & OPTION_DEBUG_INTR) 
3450                 printk ("scsi%d  : new phase = MSGIN\n", host->host_no);
3451             if ((dcmd & (DCMD_TYPE_MASK|DCMD_BMI_OP_MASK|DCMD_BMI_INDIRECT|
3452                     DCMD_BMI_MSG|DCMD_BMI_CD)) == (DCMD_TYPE_BMI|
3453                     DCMD_BMI_OP_MOVE_I)) {
3454                 dsp[0] = dbc_dcmd;
3455                 dsp[1] = NCR53c7x0_read32(DNAD_REG);
3456                 NCR53c7x0_write32(TEMP_REG, virt_to_bus(dsp));
3457                 mb();
3458                 hostdata->dsp = hostdata->script + hostdata->E_msg_in /
3459                     sizeof(u32);
3460                 hostdata->dsp_changed = 1;
3461             } else {
3462                 printk("scsi%d : unexpected MSGIN in dynamic NCR code, dcmd=0x%x.\n",
3463                     host->host_no, dcmd);
3464                 print_insn (host, dsp, "", 1);
3465                 print_insn (host, dsp_next, "", 1);
3466                 abort_connected (host);
3467             }
3468             return;
3469         /*
3470          * MSGOUT phase - shouldn't happen, because we haven't 
3471          *              asserted ATN.
3472          * CMDOUT phase - shouldn't happen, since we've already
3473          *              sent a valid command.
3474          * DATAIN/DATAOUT - other one shouldn't happen, since 
3475          *              SCSI commands can ONLY have one or the other.
3476          *
3477          * So, we abort the command if one of these things happens.
3478          */
3479         default:
3480             printk ("scsi%d : unexpected phase %s in data routine\n",
3481                 host->host_no, phase);
3482             abort_connected(host);
3483         } 
3484     /*
3485      * Any other phase mismatches abort the currently executing command.
3486      */
3487     } else {
3488         printk ("scsi%d : unexpected phase %s at dsp = 0x%p\n",
3489             host->host_no, phase, dsp);
3490         print_insn (host, dsp, "", 1);
3491         print_insn (host, dsp_next, "", 1);
3492         abort_connected(host);
3493     }
3494 }
3495 
3496 /*
3497  * Function : static void intr_dma (struct Scsi_Host *host, 
3498  *      struct NCR53c7x0_cmd *cmd)
3499  *
3500  * Purpose : handle all DMA interrupts, indicated by the setting 
3501  *      of the DIP bit in the ISTAT register.
3502  *
3503  * Inputs : host, cmd - host and NCR command causing the interrupt, cmd
3504  *      may be NULL.
3505  */
3506 
3507 static void intr_dma (struct Scsi_Host *host, struct NCR53c7x0_cmd *cmd) {
     /* [previous][next][first][last][top][bottom][index][help] */
3508     NCR53c7x0_local_declare();
3509     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
3510         host->hostdata;
3511     unsigned char dstat;        /* DSTAT */     
3512     u32 *dsp,
3513         *next_dsp,              /* Current dsp */
3514         *dsa,
3515         dbc_dcmd;               /* DCMD (high eight bits) + DBC */
3516     int tmp;
3517     unsigned long flags;
3518     NCR53c7x0_local_setup(host);
3519 
3520     if (!hostdata->dstat_valid) {
3521         hostdata->dstat = NCR53c7x0_read8(DSTAT_REG);
3522         hostdata->dstat_valid = 1;
3523     }
3524     
3525     dstat = hostdata->dstat;
3526     
3527     if (hostdata->options & OPTION_DEBUG_INTR)
3528         printk("scsi%d : DSTAT=0x%x\n", host->host_no, (int) dstat);
3529 
3530     dbc_dcmd = NCR53c7x0_read32 (DBC_REG);
3531     next_dsp = bus_to_virt(NCR53c7x0_read32(DSP_REG));
3532     dsp = next_dsp - NCR53c7x0_insn_size ((dbc_dcmd >> 24) & 0xff);
3533 /* XXX - check chip type */
3534     dsa = bus_to_virt(NCR53c7x0_read32(DSA_REG));
3535 
3536     /*
3537      * DSTAT_ABRT is the aborted interrupt.  This is set whenever the 
3538      * SCSI chip is aborted.  
3539      * 
3540      * With NCR53c700 and NCR53c700-66 style chips, we should only 
3541      * get this when the chip is currently running the accept 
3542      * reselect/select code and we have set the abort bit in the 
3543      * ISTAT register.
3544      *
3545      */
3546     
3547     if (dstat & DSTAT_ABRT) {
3548 #if 0
3549         /* XXX - add code here to deal with normal abort */
3550         if ((hostdata->options & OPTION_700) && (hostdata->state ==
3551             STATE_ABORTING) {
3552         } else 
3553 #endif
3554         {
3555             printk("scsi%d : unexpected abort interrupt at\n" 
3556                    "         ", host->host_no);
3557             print_insn (host, dsp, "s ", 1);
3558             panic(" ");
3559         }
3560     }
3561 
3562     /*
3563      * DSTAT_SSI is the single step interrupt.  Should be generated 
3564      * whenever we have single stepped or are tracing.
3565      */
3566 
3567     if (dstat & DSTAT_SSI) {
3568         if (hostdata->options & OPTION_DEBUG_TRACE) {
3569         } else if (hostdata->options & OPTION_DEBUG_SINGLE) {
3570             print_insn (host, dsp, "s ", 0);
3571             save_flags(flags);
3572             cli();
3573 /* XXX - should we do this, or can we get away with writing dsp? */
3574 
3575             NCR53c7x0_write8 (DCNTL_REG, (NCR53c7x0_read8(DCNTL_REG) & 
3576                 ~DCNTL_SSM) | DCNTL_STD);
3577             mb();
3578             restore_flags(flags);
3579         } else {
3580             printk("scsi%d : unexpected single step interrupt at\n"
3581                    "         ", host->host_no);
3582             print_insn (host, dsp, "", 1);
3583             panic("         mail drew@colorad.edu\n");
3584         }
3585     }
3586 
3587     /*
3588      * DSTAT_IID / DSTAT_OPC (same bit, same meaning, only the name 
3589      * is different) is generated whenever an illegal instruction is 
3590      * encountered.  
3591      * 
3592      * XXX - we may want to emulate INTFLY here, so we can use 
3593      *    the same SCSI SCRIPT (tm) for NCR53c710 through NCR53c810  
3594      *    chips once we remove the ADD WITH CARRY instructions.
3595      */
3596 
3597     if (dstat & DSTAT_OPC) {
3598     /* 
3599      * Ascertain if this IID interrupts occurred before or after a STO 
3600      * interrupt.  Since the interrupt handling code now leaves 
3601      * DSP unmodified until _after_ all stacked interrupts have been
3602      * processed, reading the DSP returns the original DSP register.
3603      * This means that if dsp lies between the select code, and 
3604      * message out following the selection code (where the IID interrupt
3605      * would have to have occurred by due to the implicit wait for REQ),
3606      * we have an IID interrupt resulting from a STO condition and 
3607      * can ignore it.
3608      */
3609 
3610         if (((dsp >= (hostdata->script + hostdata->E_select / sizeof(u32))) &&
3611             (dsp <= (hostdata->script + hostdata->E_select_msgout / 
3612             sizeof(u32) + 8))) || (hostdata->test_running == 2)) {
3613             if (hostdata->options & OPTION_DEBUG_INTR) 
3614                 printk ("scsi%d : ignoring DSTAT_IID for SSTAT_STO\n",
3615                     host->host_no);
3616             if (hostdata->expecting_iid) {
3617                 hostdata->expecting_iid = 0;
3618                 hostdata->idle = 1;
3619                 if (hostdata->test_running == 2) {
3620                     hostdata->test_running = 0;
3621                     hostdata->test_completed = 3;
3622                 } else if (cmd) 
3623                         abnormal_finished (cmd, DID_BAD_TARGET << 16);
3624             } else {
3625                 hostdata->expecting_sto = 1;
3626             }
3627         } else {
3628             printk("scsi%d : illegal instruction ", host->host_no);
3629             print_insn (host, dsp, "", 1);
3630             printk("scsi%d : DSP=0x%p, DCMD|DBC=0x%x, DSA=0x%p\n"
3631                "         DSPS=0x%x, TEMP=0x%x, DMODE=0x%x,\n" 
3632                "         DNAD=0x%x\n",
3633              host->host_no, dsp, dbc_dcmd,
3634              dsa, NCR53c7x0_read32(DSPS_REG),
3635              NCR53c7x0_read32(TEMP_REG), NCR53c7x0_read8(hostdata->dmode),
3636              NCR53c7x0_read32(DNAD_REG));
3637             panic("         mail drew@Colorado.EDU\n");
3638         }
3639     }
3640 
3641     /* 
3642      * DSTAT_BF are bus fault errors, generated when the chip has 
3643      * attempted to access an illegal address.
3644      */
3645     
3646     if (dstat & DSTAT_800_BF) {
3647         printk("scsi%d : BUS FAULT, DSP=0x%p, DCMD|DBC=0x%x, DSA=0x%p\n"
3648                "         DSPS=0x%x, TEMP=0x%x, DMODE=0x%x\n", 
3649              host->host_no, dsp, NCR53c7x0_read32(DBC_REG),
3650              dsa, NCR53c7x0_read32(DSPS_REG),
3651              NCR53c7x0_read32(TEMP_REG), NCR53c7x0_read8(hostdata->dmode));
3652         print_dsa (host, dsa);
3653         printk("scsi%d : DSP->\n", host->host_no);
3654         print_insn(host, dsp, "", 1);
3655         print_insn(host, next_dsp, "", 1);
3656 #if 0
3657         panic("          mail drew@Colorado.EDU\n");
3658 #else
3659         hostdata->idle = 1;
3660         hostdata->options |= OPTION_DEBUG_INIT_ONLY;
3661 #endif
3662     }
3663         
3664 
3665     /* 
3666      * DSTAT_SIR interrupts are generated by the execution of 
3667      * the INT instruction.  Since the exact values available 
3668      * are determined entirely by the SCSI script running, 
3669      * and are local to a particular script, a unique handler
3670      * is called for each script.
3671      */
3672 
3673     if (dstat & DSTAT_SIR) {
3674         if (hostdata->options & OPTION_DEBUG_INTR)
3675             printk ("scsi%d : DSTAT_SIR\n", host->host_no);
3676         switch ((tmp = hostdata->dstat_sir_intr (host, cmd))) {
3677         case SPECIFIC_INT_NOTHING:
3678         case SPECIFIC_INT_RESTART:
3679             break;
3680         case SPECIFIC_INT_ABORT:
3681             abort_connected(host);
3682             break;
3683         case SPECIFIC_INT_PANIC:
3684             printk("scsi%d : failure at ", host->host_no);
3685             print_insn (host, dsp, "", 1);
3686             panic("          dstat_sir_intr() returned SPECIFIC_INT_PANIC\n");
3687             break;
3688         case SPECIFIC_INT_BREAK:
3689             intr_break (host, cmd);
3690             break;
3691         default:
3692             printk("scsi%d : failure at ", host->host_no);
3693             print_insn (host, dsp, "", 1);
3694             panic("          dstat_sir_intr() returned unknown value %d\n", 
3695                 tmp);
3696         }
3697     } 
3698 
3699 /* All DMA interrupts are fatal.  Flush SCSI queue */
3700     NCR53c7x0_write8 (STEST3_REG_800, STEST3_800_CSF);
3701     mb();
3702     while (NCR53c7x0_read8 (STEST3_REG_800) & STEST3_800_CSF);
3703 }
3704 
3705 /*
3706  * Function : static int print_insn (struct Scsi_Host *host, 
3707  *      u32 *insn, int kernel)
3708  *
3709  * Purpose : print numeric representation of the instruction pointed
3710  *      to by insn to the debugging or kernel message buffer
3711  *      as appropriate.  
3712  *
3713  *      If desired, a user level program can interpret this 
3714  *      information.
3715  *
3716  * Inputs : host, insn - host, pointer to instruction, prefix - 
3717  *      string to prepend, kernel - use printk instead of debugging buffer.
3718  *
3719  * Returns : size, in ints, of instruction printed.
3720  */
3721 
3722 static int print_insn (struct Scsi_Host *host, u32 *insn,
     /* [previous][next][first][last][top][bottom][index][help] */
3723     const char *prefix, int kernel) {
3724     char buf[80],               /* Temporary buffer and pointer */
3725         *tmp;                   
3726     unsigned char dcmd;         /* dcmd register for *insn */
3727     int size;
3728 
3729     dcmd = (insn[0] >> 24) & 0xff;
3730     sprintf(buf, "%s%p : 0x%08x 0x%08x", (prefix ? prefix : ""), 
3731         insn, insn[0], insn[1]);
3732     tmp = buf + strlen(buf);
3733     if ((dcmd & DCMD_TYPE_MASK) == DCMD_TYPE_MMI)  {
3734         sprintf (tmp, " 0x%08x\n", insn[2]);
3735         size = 3;
3736     } else {
3737         sprintf (tmp, "\n");
3738         size = 2;
3739     }
3740 
3741     if (kernel) 
3742         printk ("%s", buf);
3743 #ifdef NCR_DEBUG
3744     else {
3745         size_t len = strlen(buf);
3746         debugger_kernel_write(host, buf, len);
3747     }
3748 #endif
3749     return size;
3750 }
3751 
3752 /*
3753  * Function : int NCR53c7xx_abort (Scsi_Cmnd *cmd)
3754  * 
3755  * Purpose : Abort an errant SCSI command, doing all necessary
3756  *      cleanup of the issue_queue, running_list, shared Linux/NCR
3757  *      dsa issue and reconnect queues.
3758  *
3759  * Inputs : cmd - command to abort, code - entire result field
3760  *
3761  * Returns : 0 on success, -1 on failure.
3762  */
3763 
3764 int NCR53c7xx_abort (Scsi_Cmnd *cmd) {
     /* [previous][next][first][last][top][bottom][index][help] */
3765     struct Scsi_Host *host = cmd->host;
3766     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *) 
3767         host->hostdata;
3768     unsigned long flags;
3769     volatile struct NCR53c7x0_cmd *curr, **prev;
3770     save_flags(flags);
3771     cli();
3772 
3773 /*
3774  * The command could be hiding in the issue_queue.  This would be very
3775  * nice, as commands can't be moved from the high level driver's issue queue 
3776  * into the shared queue until an interrupt routine is serviced, and this
3777  * moving is atomic.  
3778  *
3779  * If this is the case, we don't have to worry about anything - we simply
3780  * pull the command out of the old queue, and call it aborted.
3781  */
3782 
3783     for (curr = (volatile struct NCR53c7x0_cmd *) hostdata->issue_queue, 
3784          prev = (volatile struct NCR53c7x0_cmd **) &(hostdata->issue_queue);
3785          curr && curr->cmd != cmd; prev = (volatile struct NCR53c7x0_cmd **)
3786          &(curr->next), curr = (volatile struct NCR53c7x0_cmd *) curr->next);
3787 
3788     if (curr) {
3789         *prev = (struct NCR53c7x0_cmd *) curr->next;
3790 /* XXX - get rid of DLL ? */
3791         if (curr->prev)
3792             curr->prev->next = curr->next;
3793 
3794         curr->next = hostdata->free;
3795         hostdata->free = curr;
3796 
3797         cmd->result = 0;
3798         cmd->scsi_done(cmd);
3799         restore_flags(flags);
3800         return SCSI_ABORT_SUCCESS;
3801     }
3802 
3803 /* 
3804  * That failing, the command could be in our list of already executing 
3805  * commands.  If this is the case, drastic measures are called for.  
3806  */ 
3807 
3808     for (curr = (volatile struct NCR53c7x0_cmd *) hostdata->running_list, 
3809          prev = (volatile struct NCR53c7x0_cmd **) &(hostdata->running_list);
3810          curr && curr->cmd != cmd; prev = (volatile struct NCR53c7x0_cmd **) 
3811          &(curr->next), curr = (volatile struct NCR53c7x0_cmd *) curr->next);
3812 
3813     if (curr) {
3814         restore_flags(flags);
3815         printk ("scsi%d : DANGER : command in running list, can not abort.\n",
3816             cmd->host->host_no);
3817         return SCSI_ABORT_SNOOZE;
3818     }
3819 
3820 
3821 /* 
3822  * And if we couldn't find it in any of our queues, it must have been 
3823  * a dropped interrupt.
3824  */
3825 
3826     curr = (struct NCR53c7x0_cmd *) cmd->host_scribble;
3827     curr->next = hostdata->free;
3828     hostdata->free = curr;
3829 
3830     if (((cmd->result & 0xff00) == 0xff00) ||
3831         ((cmd->result & 0xff) == 0xff)) {
3832         printk ("scsi%d : did this command ever run?\n", host->host_no);
3833     } else {
3834         printk ("scsi%d : probably lost INTFLY, normal completion\n", 
3835             host->host_no);
3836     }
3837     cmd->scsi_done(cmd);
3838     restore_flags(flags);
3839     return SCSI_ABORT_SNOOZE;
3840 }
3841 
3842 /*
3843  * Function : int NCR53c7xx_reset (Scsi_Cmnd *cmd) 
3844  * 
3845  * Purpose : perform a hard reset of the SCSI bus and NCR
3846  *      chip.
3847  *
3848  * Inputs : cmd - command which caused the SCSI RESET
3849  *
3850  * Returns : 0 on success.
3851  */
3852 
3853 int
3854 NCR53c7xx_reset (Scsi_Cmnd *cmd) {
     /* [previous][next][first][last][top][bottom][index][help] */
3855     NCR53c7x0_local_declare();
3856     unsigned long flags;
3857     int found;
3858     struct NCR53c7x0_cmd * c;
3859     Scsi_Cmnd *tmp;
3860     struct Scsi_Host *host = cmd->host;
3861     struct NCR53c7x0_hostdata *hostdata = host ? 
3862     (struct NCR53c7x0_hostdata *) host->hostdata : NULL;
3863     NCR53c7x0_local_setup(host);
3864 
3865     save_flags(flags);
3866     ncr_halt (host);
3867     NCR53c7x0_write8(SCNTL1_REG, SCNTL1_RST);
3868     mb();
3869     udelay(25); /* Minimum amount of time to assert RST */
3870     NCR53c7x0_write8(SCNTL1_REG, SCNTL1_RST);
3871     mb();
3872     for (c = (struct NCR53c7x0_cmd *) hostdata->running_list, found = 0; c; 
3873         c = (struct NCR53c7x0_cmd *) c->next)  {
3874         tmp = c->cmd;
3875         c->next = hostdata->free;
3876         hostdata->free = c;
3877 
3878         if (tmp == cmd)
3879             found = 1; 
3880         tmp->result = DID_RESET << 16;
3881         tmp->scsi_done(tmp);
3882     }
3883     if (!found) {
3884         c = (struct NCR53c7x0_cmd *) cmd->host_scribble;
3885         if (c) {
3886             c->next = hostdata->free;
3887             hostdata->free = c;
3888         }
3889         cmd->result = DID_RESET << 16;
3890         cmd->scsi_done(cmd);
3891     }
3892     restore_flags(flags);
3893     return SCSI_RESET_SUCCESS;
3894 }
3895 
3896 /*
3897  * The NCR SDMS bios follows Annex A of the SCSI-CAM draft, and 
3898  * therefore shares the scsicam_bios_param function.
3899  */
3900 
3901 static void print_dsa (struct Scsi_Host *host, u32 *dsa) {
     /* [previous][next][first][last][top][bottom][index][help] */
3902     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
3903         host->hostdata;
3904     int i, len;
3905     char *ptr;
3906 
3907     printk("scsi%d : dsa at 0x%p\n"
3908             "        + %d : dsa_msgout length = %d, data = 0x%x\n" ,
3909             host->host_no, dsa, hostdata->dsa_msgout,
3910             dsa[hostdata->dsa_msgout / sizeof(u32)],
3911             dsa[hostdata->dsa_msgout / sizeof(u32) + 1]);
3912 
3913     for (i = dsa[hostdata->dsa_msgout / sizeof(u32)],
3914         ptr = bus_to_virt(dsa[hostdata->dsa_msgout / sizeof(u32) + 1]); i > 0;
3915         ptr += len, i -= len) {
3916         printk("               ");
3917         len = print_msg (ptr);
3918         printk("\n");
3919     }
3920 }
3921 
3922 /*
3923  * Function : static int shutdown (struct Scsi_Host *host)
3924  * 
3925  * Purpose : does a clean (we hope) shutdown of the NCR SCSI 
3926  *      chip.  Use prior to dumping core, unloading the NCR driver,
3927  *      etc.
3928  * 
3929  * Returns : 0 on success
3930  */
3931 #ifdef MODULE
3932 static int 
3933 shutdown (struct Scsi_Host *host) {
     /* [previous][next][first][last][top][bottom][index][help] */
3934     NCR53c7x0_local_declare();
3935     unsigned long flags;
3936     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
3937         host->hostdata;
3938     NCR53c7x0_local_setup(host);
3939     save_flags (flags);
3940     cli();
3941     ncr_halt (host);
3942     hostdata->soft_reset(host);
3943 /* 
3944  * For now, we take the simplest solution : reset the SCSI bus. Eventually,
3945  * - If a command is connected, kill it with an ABORT message
3946  * - If commands are disconnected, connect to each target/LUN and 
3947  *      do a ABORT, followed by a SOFT reset, followed by a hard 
3948  *      reset.  
3949  */
3950     NCR53c7x0_write8(SCNTL1_REG, SCNTL1_RST);
3951     mb();
3952     udelay(25); /* Minimum amount of time to assert RST */
3953     NCR53c7x0_write8(SCNTL1_REG, SCNTL1_RST);
3954     mb();
3955     restore_flags (flags);
3956     return 0;
3957 }
3958 #endif
3959 
3960 
3961 /*
3962  * Function : static int ncr_halt (struct Scsi_Host *host)
3963  * 
3964  * Purpose : halts the SCSI SCRIPTS(tm) processor on the NCR chip
3965  *
3966  * Inputs : host - SCSI chip to halt
3967  *
3968  * Returns : 0 on success
3969  */
3970 
3971 static int 
3972 ncr_halt (struct Scsi_Host *host) {
     /* [previous][next][first][last][top][bottom][index][help] */
3973     NCR53c7x0_local_declare();
3974     unsigned long flags;
3975     unsigned char istat, tmp;
3976     struct NCR53c7x0_hostdata *hostdata = (struct NCR53c7x0_hostdata *)
3977         host->hostdata;
3978     NCR53c7x0_local_setup(host);
3979 
3980     save_flags(flags);
3981     cli();
3982     NCR53c7x0_write8(hostdata->istat, ISTAT_ABRT);
3983     mb();
3984     /* Eat interrupts until we find what we're looking for */
3985     for (;;) {
3986         istat = NCR53c7x0_read8 (hostdata->istat);
3987         if (istat & ISTAT_SIP) {
3988             if ((hostdata->chip / 100) == 8) {
3989                 tmp = NCR53c7x0_read8(SIST0_REG_800);
3990                 udelay(1);
3991                 tmp = NCR53c7x0_read8(SIST1_REG_800);
3992             } else {
3993                 tmp = NCR53c7x0_read8(SSTAT0_REG);
3994             }
3995         } else if (istat & ISTAT_DIP) {
3996             NCR53c7x0_write8(hostdata->istat, 0);
3997             mb();
3998             tmp = NCR53c7x0_read8(DSTAT_REG);
3999             if (tmp & DSTAT_ABRT)
4000                 break;
4001             else
4002                 panic("scsi%d: could not halt NCR chip\n", host->host_no);
4003         }
4004     }
4005     hostdata->state = STATE_HALTED;
4006     restore_flags(flags);
4007     return 0;
4008 }
4009 
4010 #ifdef MODULE
4011 int NCR53c7x0_release(struct Scsi_Host *host) {
     /* [previous][next][first][last][top][bottom][index][help] */
4012     shutdown (host);
4013 /* FIXME : need to recursively free tpnt structure */
4014     if (host->irq != IRQ_NONE)
4015         {
4016             int irq_count;
4017             struct Scsi_Host *tmp;
4018             for (irq_count = 0, tmp = first_host; tmp; tmp = tmp->next)
4019                 if (tmp->hostt == the_template && tmp->irq == host->irq)
4020                     ++irq_count;
4021             if (irq_count == 1)
4022                 free_irq(host->irq);
4023         }
4024     if (host->dma_channel != DMA_NONE)
4025         free_dma(host->dma_channel);
4026     return 1;
4027 }
4028 Scsi_Host_Template driver_template = NCR53c7xx;
4029 #include "scsi_module.c"
4030 #endif /* def MODULE */

/* [previous][next][first][last][top][bottom][index][help] */