tag	line	file	source code
io	1536	drivers/block/optcd.c	u_char io;
io	1553	drivers/block/optcd.c	io = ISP16_IN( ISP16_IO_SET_PORT ) & 0x03;
io	1554	drivers/block/optcd.c	if ( ((io&0x01)<<1) == (io&0x02) ) {  /* bits are the same */
io	1555	drivers/block/optcd.c	if ( io == 0 ) {  /* ...the same and 0 */
io	1473	drivers/block/sjcd.c	u_char io;
io	1490	drivers/block/sjcd.c	io = ISP16_IN( ISP16_IO_SET_PORT ) & 0x03;
io	1491	drivers/block/sjcd.c	if ( ((io&0x01)<<1) == (io&0x02) ) {  /* bits are the same */
io	1492	drivers/block/sjcd.c	if ( io == 0 ) {  /* ...the same and 0 */
io	560	drivers/char/lp.c	int io[] = {0, 0, 0};
io	584	drivers/char/lp.c	if (io[offset] != 0) {
io	585	drivers/char/lp.c	LP_B(offset) = io[offset];
io	688	drivers/net/3c501.c	int io=0x280;
io	695	drivers/net/3c501.c	dev_3c501.base_addr=io;
io	501	drivers/net/3c503.c	int io = 0x300;
io	508	drivers/net/3c503.c	el2_drv.base_addr = io;
io	510	drivers/net/3c503.c	el2pio_drv.base_addr = io;
io	513	drivers/net/3c503.c	if (io == 0)
io	1473	drivers/net/3c505.c	int io = 0x300;
io	1478	drivers/net/3c505.c	if (io == 0)
io	1480	drivers/net/3c505.c	dev_3c505.base_addr = io;
io	894	drivers/net/3c507.c	int io = 0x300;
io	899	drivers/net/3c507.c	if (io == 0)
io	901	drivers/net/3c507.c	dev_3c507.base_addr = io;
io	717	drivers/net/3c509.c	int io = 0;
io	723	drivers/net/3c509.c	dev_3c509.base_addr = io;
io	317	drivers/net/ac3200.c	int io = 0;
io	322	drivers/net/ac3200.c	dev_ac3200.base_addr = io;
io	1024	drivers/net/apricot.c	int io = 0x300;
io	1030	drivers/net/apricot.c	dev_apricot.base_addr = io;
io	2451	drivers/net/arcnet.c	int io=0x0;  /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */
io	2461	drivers/net/arcnet.c	thiscard.base_addr=io;
io	640	drivers/net/at1700.c	int io = 0x260;
io	645	drivers/net/at1700.c	if (io == 0)
io	647	drivers/net/at1700.c	dev_at1700.base_addr = io;
io	2747	drivers/net/de4x5.c	static int io=0x000b;  /* EDIT THESE LINES FOR YOUR CONFIGURATION */
io	2753	drivers/net/de4x5.c	thisDE4X5.base_addr=io;
io	1830	drivers/net/depca.c	static int io=0x200;    /* Or use the irq= io= options to insmod */
io	1835	drivers/net/depca.c	if (io == 0)
io	1838	drivers/net/depca.c	thisDepca.base_addr=io;
io	383	drivers/net/e2100.c	int io = 0x300;
io	388	drivers/net/e2100.c	if (io == 0)
io	390	drivers/net/e2100.c	dev_e2100.base_addr = io;
io	1141	drivers/net/eepro.c	int io = 0x200;
io	1147	drivers/net/eepro.c	if (io == 0)
io	1149	drivers/net/eepro.c	dev_eepro.base_addr = io;
io	1014	drivers/net/eexpress.c	int io=0;
io	1019	drivers/net/eexpress.c	if (io == 0)
io	1021	drivers/net/eexpress.c	dev_eexpress.base_addr=io;
io	1867	drivers/net/ewrk3.c	int io=0x300;  /* <--- EDIT THESE LINES FOR YOUR CONFIGURATION */
io	1873	drivers/net/ewrk3.c	thisEthwrk.base_addr=io;
io	411	drivers/net/hp-plus.c	int io = 0x200;
io	416	drivers/net/hp-plus.c	if (io == 0)
io	418	drivers/net/hp-plus.c	dev_hp.base_addr = io;
io	361	drivers/net/hp.c	int io = 300;
io	366	drivers/net/hp.c	if (io == 0)
io	368	drivers/net/hp.c	dev_hp.base_addr = io;
io	1308	drivers/net/ibmtr.c	int io = 0xa20;
io	1312	drivers/net/ibmtr.c	if (io == 0)
io	1314	drivers/net/ibmtr.c	dev_ibmtr.base_addr = io;
io	583	drivers/net/ne.c	int io = 0x300;
io	588	drivers/net/ne.c	if (io == 0)
io	590	drivers/net/ne.c	dev_ne2000.base_addr = io;
io	1064	drivers/net/plip.c	int io[] = {0, 0, 0};
io	1099	drivers/net/plip.c	if (io[i] != 0) {
io	1100	drivers/net/plip.c	dev_plip[i].base_addr = io[i];
io	546	drivers/net/skeleton.c	int io = 0x300;
io	555	drivers/net/skeleton.c	if (io == 0)
io	560	drivers/net/skeleton.c	this_device.base_addr = io;
io	349	drivers/net/smc-ultra.c	int io = 0x200;
io	354	drivers/net/smc-ultra.c	if (io == 0)
io	356	drivers/net/smc-ultra.c	dev_ultra.base_addr = io;
io	756	drivers/net/tulip.c	int io = 0;
io	764	drivers/net/tulip.c	if (io == 0)
io	766	drivers/net/tulip.c	dev_tulip.base_addr = io;
io	2188	drivers/net/wavelan.c	int io = 0x390; /* Default from above.. */
io	2194	drivers/net/wavelan.c	dev_wavelan.base_addr = io;
io	419	drivers/net/wd.c	int io = 0x300;
io	425	drivers/net/wd.c	if (io == 0)
io	427	drivers/net/wd.c	dev_wd80x3.base_addr = io;