tag | line | file | source code |
DBG | 91 | arch/alpha/kernel/apecs.c | DBG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p, type1=0x%p)\n", |
DBG | 100 | arch/alpha/kernel/apecs.c | DBG(("mk_conf_addr: device (%d) > 20, returning -1\n", device)); |
DBG | 112 | arch/alpha/kernel/apecs.c | DBG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr)); |
DBG | 126 | arch/alpha/kernel/apecs.c | DBG(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1)); |
DBG | 132 | arch/alpha/kernel/apecs.c | DBG(("conf_read: APECS DCSR was 0x%x\n", stat0)); |
DBG | 138 | arch/alpha/kernel/apecs.c | DBG(("conf_read: TYPE1 access\n")); |
DBG | 167 | arch/alpha/kernel/apecs.c | DBG(("conf_read: APECS DCSR after read 0x%x\n", stat0)); |
DBG | 435 | arch/alpha/kernel/apecs.c | DBG(("apecs_machine_check: vector=0x%lx la_ptr=0x%lx\n", vector, la_ptr)); |
DBG | 436 | arch/alpha/kernel/apecs.c | DBG((" pc=0x%lx size=0x%x procoffset=0x%x sysoffset 0x%x\n", |
DBG | 438 | arch/alpha/kernel/apecs.c | DBG(("apecs_machine_check: expected %d DCSR 0x%lx PEAR 0x%lx\n", |
DBG | 171 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM_ALL, ("getting long at 0x%lx\n", addr)); |
DBG | 292 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM_ALL, ("in read_long\n")); |
DBG | 320 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM_ALL, ("value is 0x%lx\n", l)); |
DBG | 440 | arch/alpha/kernel/ptrace.c | DBG(DBG_BPT, ("execing branch\n")); |
DBG | 444 | arch/alpha/kernel/ptrace.c | DBG(DBG_BPT, ("execing jump\n")); |
DBG | 447 | arch/alpha/kernel/ptrace.c | DBG(DBG_BPT, ("execing normal insn\n")); |
DBG | 456 | arch/alpha/kernel/ptrace.c | DBG(DBG_BPT, (" -> next_pc=%lx\n", child->debugreg[i])); |
DBG | 494 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM, ("request=%ld pid=%ld addr=0x%lx data=0x%lx\n", |
DBG | 530 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM, ("child not traced\n")); |
DBG | 534 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM, ("child process not stopped\n")); |
DBG | 539 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM, ("child not parent of this process\n")); |
DBG | 551 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM, ("peek %#lx->%#lx\n", addr, tmp)); |
DBG | 561 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM, ("peek $%ld=%#lx\n", addr, regs.r0)); |
DBG | 567 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM, ("poke %#lx<-%#lx\n", addr, data)); |
DBG | 571 | arch/alpha/kernel/ptrace.c | DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data)); |
DBG | 124 | drivers/scsi/eata_dma.c | DBG(DBG_INTR3, printk("eata_fake_int_handler called irq%d base %#x" |
DBG | 195 | drivers/scsi/eata_dma.c | DBG(DBG_DELAY, DEL2(800)); |
DBG | 204 | drivers/scsi/eata_dma.c | DBG(DBG_INTR && DBG_DELAY, DEL2(800)); |
DBG | 210 | drivers/scsi/eata_dma.c | DBG(DBG_INTR, printk("IRQ %d received, base %#.4x, pid %ld, target: " |
DBG | 295 | drivers/scsi/eata_dma.c | DBG(DBG_INTR&&DBG_DELAY,DEL2(800)); |
DBG | 400 | drivers/scsi/eata_dma.c | DBG(DBG_QUEUE, printk("eata_queue pid %ld, target: %x, lun: %x, y %d\n", |
DBG | 402 | drivers/scsi/eata_dma.c | DBG(DBG_QUEUE && DBG_DELAY, DEL2(250)); |
DBG | 515 | drivers/scsi/eata_dma.c | DBG(DBG_QUEUE,printk("Queued base %#.4x pid: %ld target: %x lun: %x " |
DBG | 518 | drivers/scsi/eata_dma.c | DBG(DBG_QUEUE && DBG_DELAY, DEL2(200)); |
DBG | 532 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("eata_abort called pid: %ld target: %x lun: %x" |
DBG | 535 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 542 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 546 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_BUSY\n")); |
DBG | 551 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_NOT_RUNNING\n")); |
DBG | 558 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 563 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("eata_dma: abort, queue slot locked.\n")); |
DBG | 564 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 583 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("eata_reset called pid:%ld target: %x lun: %x" |
DBG | 590 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 598 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 616 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 622 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 626 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 636 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("eata_reset: board reset done, enabling interrupts.\n")); |
DBG | 648 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("eata_reset: interrupts disabled, loops %ld.\n", |
DBG | 650 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 666 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 676 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("eata_reset: exit, success.\n")); |
DBG | 677 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 680 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM, printk("eata_reset: exit, wakeup.\n")); |
DBG | 681 | drivers/scsi/eata_dma.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 735 | drivers/scsi/eata_dma.c | DBG(DBG_INTR3, printk("fake_int_result: %#x hbastat %#x scsistat %#x," |
DBG | 768 | drivers/scsi/eata_dma.c | DBG(DBG_BLINK, printk("Did Blink check. Status: %d\n", |
DBG | 791 | drivers/scsi/eata_dma.c | DBG(DBG_PIO && DBG_PROBE, |
DBG | 808 | drivers/scsi/eata_dma.c | DBG(DBG_PIO&&DBG_PROBE, printk("EATA Controller found at %x " |
DBG | 817 | drivers/scsi/eata_dma.c | DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during transfer " |
DBG | 839 | drivers/scsi/eata_dma.c | DBG(DPT_DEBUG, DELAY(14)); |
DBG | 854 | drivers/scsi/eata_dma.c | DBG(DBG_REGISTER, print_config(gc)); |
DBG | 945 | drivers/scsi/eata_dma.c | DBG(DBG_REGISTER, printk("scsi_register size: %ld\n", size)); |
DBG | 1124 | drivers/scsi/eata_dma.c | DBG(DBG_PROBE, printk("EISA EATA id tags found: %x %x %x \n", |
DBG | 1129 | drivers/scsi/eata_dma.c | DBG(DBG_EISA, printk("Registering EISA HBA\n")); |
DBG | 1155 | drivers/scsi/eata_dma.c | DBG(DBG_ISA, printk("Registering ISA HBA\n")); |
DBG | 1188 | drivers/scsi/eata_dma.c | DBG(DBG_PROBE && DBG_PCI, |
DBG | 1242 | drivers/scsi/eata_dma.c | DBG(DBG_PCI, printk("Registering PCI HBA\n")); |
DBG | 1281 | drivers/scsi/eata_dma.c | DBG((DBG_PROBE && DBG_DELAY) || DPT_DEBUG, |
DBG | 1337 | drivers/scsi/eata_dma.c | DBG(DPT_DEBUG, DELAY(12)); |
DBG | 462 | drivers/scsi/eata_dma_proc.c | DBG(DBG_PROC, printk("2pos: %ld offset: %ld len: %d\n", pos, offset, len)); |
DBG | 467 | drivers/scsi/eata_dma_proc.c | DBG(DBG_PROC, printk("3pos: %ld offset: %ld len: %d\n", pos, offset, len)); |
DBG | 245 | drivers/scsi/eata_pio.c | DBG(DBG_INTR&&DBG_DELAY,DEL2(800)); |
DBG | 253 | drivers/scsi/eata_pio.c | DBG(DBG_INTR&&DBG_DELAY,DEL2(800)); |
DBG | 305 | drivers/scsi/eata_pio.c | DBG(DBG_QUEUE, printk("can_queue %d, x %d, y %d\n",sh->can_queue,x,y)); |
DBG | 321 | drivers/scsi/eata_pio.c | DBG(DBG_QUEUE, printk("eata_pio_queue pid %ld, target: %x, lun: %x, y %d\n", |
DBG | 323 | drivers/scsi/eata_pio.c | DBG(DBG_QUEUE && DBG_DELAY, DEL2(250)); |
DBG | 394 | drivers/scsi/eata_pio.c | DBG(DBG_QUEUE,printk("Queued base %#.4lx pid: %ld target: %x lun: %x " |
DBG | 397 | drivers/scsi/eata_pio.c | DBG(DBG_QUEUE && DBG_DELAY, DEL2(200)); |
DBG | 411 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("eata_pio_abort called pid: %ld target: %x lun: %x" |
DBG | 414 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 421 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 425 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_NOT_RUNNING\n")); |
DBG | 430 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("Returning: SCSI_ABORT_BUSY\n")); |
DBG | 437 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 442 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("eata_pio: abort, queue slot locked.\n")); |
DBG | 443 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 460 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("eata_pio_reset called pid:%ld target: %x lun: %x " |
DBG | 467 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 486 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 490 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 496 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("eata_pio_reset: board reset done.\n")); |
DBG | 502 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("eata_pio_reset: interrupts disabled, loops %d.\n", limit)); |
DBG | 503 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 527 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("eata_pio_reset: exit, success.\n")); |
DBG | 528 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 531 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM, printk("eata_pio_reset: exit, wakeup.\n")); |
DBG | 532 | drivers/scsi/eata_pio.c | DBG(DBG_ABNORM && DBG_DELAY, DEL2(500)); |
DBG | 597 | drivers/scsi/eata_pio.c | DBG(DBG_PIO && DBG_PROBE, |
DBG | 613 | drivers/scsi/eata_pio.c | DBG(DBG_PIO&&DBG_PROBE, printk("EATA Controller found at %#4x " |
DBG | 629 | drivers/scsi/eata_pio.c | DBG(DBG_PROBE, printk("eata_dma: get_conf_PIO, error during transfer " |
DBG | 647 | drivers/scsi/eata_pio.c | DBG(DPT_DEBUG, DELAY(14)); |
DBG | 686 | drivers/scsi/eata_pio.c | DBG(DBG_REGISTER, print_pio_config(gc)); |
DBG | 856 | drivers/scsi/eata_pio.c | DBG(DBG_PROBE, printk("EISA EATA id tags found: %x %x %x \n", |
DBG | 860 | drivers/scsi/eata_pio.c | DBG(DBG_PROBE && DBG_EISA, print_pio_config(buf)); |
DBG | 895 | drivers/scsi/eata_pio.c | DBG(DBG_PROBE && DBG_PCI, |
DBG | 980 | drivers/scsi/eata_pio.c | DBG((DBG_PROBE && DBG_DELAY) || DPT_DEBUG, |
DBG | 1020 | drivers/scsi/eata_pio.c | DBG(DPT_DEBUG,DELAY(12)); |
DBG | 25 | drivers/scsi/eata_pio_proc.c | DBG(DBG_PROC_WRITE, printk("%s\n", buffer)); |
DBG | 123 | drivers/scsi/eata_pio_proc.c | DBG(DBG_PROC, printk("2pos: %ld offset: %ld len: %d\n", pos, offset, len)); |
DBG | 128 | drivers/scsi/eata_pio_proc.c | DBG(DBG_PROC, printk("3pos: %ld offset: %ld len: %d\n", pos, offset, len)); |