tag	line	file	source code
Outb	221	drivers/char/scc.c	Outb(port, reg);
Outb	227	drivers/char/scc.c	Outb(port, reg);
Outb	236	drivers/char/scc.c	Outb(port, reg); udelay(5);
Outb	237	drivers/char/scc.c	Outb(port, val); udelay(5);
Outb	239	drivers/char/scc.c	Outb(port, reg);
Outb	240	drivers/char/scc.c	Outb(port, val);
Outb	552	drivers/char/scc.c	Outb(Vector_Latch, 0);      /* Generate INTACK */
Outb	570	drivers/char/scc.c	Outb(scc->ctrl,0x38);              /* Reset Highest IUS" opcode to WR0 */
Outb	589	drivers/char/scc.c	Outb(q,3);
Outb	595	drivers/char/scc.c	Outb(q,2);
Outb	660	drivers/char/scc.c	Outb(scc->ctrl,RES_Tx_P);       /* reset pending int */
Outb	668	drivers/char/scc.c	Outb(scc->ctrl, RES_Tx_CRC);  /* reset CRC generator */
Outb	670	drivers/char/scc.c	Outb(scc->data,bp->data[bp->in_use++]);
Outb	673	drivers/char/scc.c	Outb(scc->ctrl, RES_EOM_L);
Outb	677	drivers/char/scc.c	Outb(scc->data,bp->data[bp->in_use++]);
Outb	769	drivers/char/scc.c	Outb(scc->ctrl, RES_Tx_P);
Outb	770	drivers/char/scc.c	Outb(scc->ctrl, RES_EXT_INT);  /* reset ext/status interrupts */
Outb	781	drivers/char/scc.c	Outb(scc->ctrl, RES_Tx_P); /* just to be sure */
Outb	790	drivers/char/scc.c	Outb(scc->ctrl,RES_EXT_INT);
Outb	901	drivers/char/scc.c	Outb(scc->ctrl,ERR_RES);
Outb	1020	drivers/char/scc.c	Outb(scc->ctrl,RES_EXT_INT);  /* reset ext/status interrupts */
Outb	1021	drivers/char/scc.c	Outb(scc->ctrl,RES_EXT_INT);  /* must be done twice */
Outb	1053	drivers/char/scc.c	Outb(scc->ctrl + 4, Option | (tx? 0x80 : 0));
Outb	1646	drivers/char/scc.c	Outb(Special_Port,0x08);  /* enable interrupt on the board */
Outb	1649	drivers/char/scc.c	Outb(Special_Port,Option);  /* set the MODEM mode (0x22) */
Outb	1660	drivers/char/scc.c	Outb(scc->ctrl, 0);
Outb	1780	drivers/char/scc.c	Outb(scc->ctrl,0);    /* Make sure pointer is written */
Outb	2364	drivers/char/scc.c	Outb(ctrl, 0);