root/scripts/header.tk

/* [previous][next][first][last][top][bottom][index][help] */
#
# Used to determine size of canvas inserted for booleans. It holds the
# place where the 'm' button goes in a tristate, and keeps the look and feel
# consistent.
#
set modbutton_width 0
set modbutton_height 0

#
# Set to be the x and y position of subwindows.
#
set winx 100
set winy 200

#
# Define some macros we will need to parse the kmenu-config.dat file.
#
proc mainmenu_name { text } {
        message .header.message -width 400 -relief raised -bg grey -text "$text"
        pack .header.label .header.message -side left -padx 15
        wm title . "$text"
}

proc menu_option { w menu_num text } {
        button .f0.x$menu_num -text "$text" -width 50 -command "$w .$w \"$text\""
        pack .f0.x$menu_num -anchor w -pady 1
}

#
# Not used at the moment, but this runs a command in a subprocess and
# displays the result in a window with a scrollbar.
#
proc do_cmd { w command } {
        catch {destroy $w}
        toplevel $w -class Dialog
        frame $w.tb
        text $w.tb.text -relief raised -bd 2 -yscrollcommand "$w.tb.scroll set"
        scrollbar $w.tb.scroll -command "$w.tb.text yview"
        pack $w.tb.scroll -side right -fill y
        pack $w.tb.text -side left

        set oldFocus [focus]
        frame $w.back
        button $w.back.ok -text "OK" -activebackground green -width 20 \
                -command "destroy $w; focus $oldFocus" -state disabled
        button $w.back.ccl -text "Cancel" -activebackground green -width 20 \
                -command "destroy $w; focus $oldFocus"
        pack $w.tb -side top
        pack $w.back.ok $w.back.ccl -side left
        pack $w.back -side bottom -pady 10

        focus $w
        wm geometry $w +30+35

        $w.tb.text delete 1.0 end
        set f [open |$command]
        while {![eof $f]} {
                $w.tb.text insert end [read $f 256]
        }
        close $f
        $w.back.ok configure -state normal
}

proc load_configfile { w title func } {
        catch {destroy $w}
        toplevel $w -class Dialog
        global loadfile
        frame $w.x
        label $w.bm -bitmap questhead
        pack  $w.bm -pady 10 -side top -padx 10
        label $w.x.l -text "Enter filename:" -relief raised
        entry $w.x.x -width 35 -relief sunken -borderwidth 2 \
                -textvariable loadfile
        pack $w.x.l $w.x.x -anchor w -side left
        pack $w.x -side top -pady 10
        wm title $w "$title" 

        set oldFocus [focus]
        frame $w.f
        button $w.f.back -text "OK" -activebackground green -width 20 \
                -command "destroy $w; focus $oldFocus;$func .fileio"
        button $w.f.canc -text "Cancel" -activebackground red \
                -width 20 -command "destroy $w; focus $oldFocus"
        pack $w.f.back $w.f.canc -side left -pady 10 -padx 45
        pack $w.f -pady 10 -side bottom -padx 10 -anchor w
        focus $w
        global winx; global winy
        set winx [expr [winfo x .]+30]; set winy [expr [winfo y .]+30]
        wm geometry $w +$winx+$winy
}

proc maybe_exit { w } {
        catch {destroy $w}
        toplevel $w -class Dialog
        label $w.bm -bitmap questhead
        pack  $w.bm -pady 10 -side top -padx 10
        message $w.m -width 400 -aspect 300 \
                -text "Changes will be lost.  Are you sure?"  -relief raised \
                -fg black
        pack  $w.m -pady 10 -side top -padx 10
        wm title $w "Are you sure?" 

        set oldFocus [focus]
        frame $w.f
        button $w.f.back -text "OK" -activebackground green -width 20 \
                -command "exit"
        button $w.f.canc -text "Cancel" -activebackground red \
                -width 20 -command "destroy $w; focus $oldFocus"
        pack $w.f.back $w.f.canc -side left -pady 10 -padx 45
        pack $w.f -pady 10 -side bottom -padx 10 -anchor w
        focus $w
        global winx; global winy
        set winx [expr [winfo x .]+30]; set winy [expr [winfo y .]+30]
        wm geometry $w +$winx+$winy
}

proc read_config_file { w } {
        global loadfile
        if { [string length $loadfile] != 0 && [file readable $loadfile] == 1 } then {
                read_config $loadfile
        } else {
                catch {destroy $w}
                toplevel $w -class Dialog
                message $w.m -width 400 -aspect 300 -text \
                        "Unable to read file $loadfile" \
                         -relief raised -fg black
                label $w.bm -bitmap error
                pack $w.bm $w.m -pady 10 -side top -padx 10
                wm title $w "Oops" 

                set oldFocus [focus]
                frame $w.f
                button $w.f.back -text "Bummer" -activebackground green \
                        -width 10 -command "destroy $w; focus $oldFocus"
                pack $w.f.back -side bottom -pady 10 -anchor s
                pack $w.f -pady 10 -side top -padx 10 -anchor s
                focus $w
                global winx; global winy
                set winx [expr [winfo x .]+30]; set winy [expr [winfo y .]+30]
                wm geometry $w +$winx+$winy
        }
}

proc write_config_file  { w } {
        global loadfile
        if { [string length $loadfile] != 0 
                && ([file writable $loadfile] == 1 || ([file exists $loadfile] == 0 && [file writable [file dirname $loadfile]] == 1)) } then {
                writeconfig $loadfile /dev/null
        } else {
                catch {destroy $w}
                toplevel $w -class Dialog
                message $w.m -width 400 -aspect 300 -text \
                        "Unable to write file $loadfile" \
                         -relief raised -fg black
                label $w.bm -bitmap error
                pack $w.bm $w.m -pady 10 -side top -padx 10
                wm title $w "Oops" 

                set oldFocus [focus]
                frame $w.f
                button $w.f.back -text "OK" -activebackground green \
                        -width 10 -command "destroy $w; focus $oldFocus"
                pack $w.f.back -side bottom -pady 10 -anchor s
                pack $w.f -pady 10 -side top -padx 10 -anchor s
                focus $w
                global winx; global winy
                set winx [expr [winfo x .]+30]; set winy [expr [winfo y .]+30]
                wm geometry $w +$winx+$winy
        }
}

proc read_config { filename } {
        set file1 [open $filename r]
        clear_choices
        while { [gets $file1 line] >= 0} {
                if [regexp {([0-9A-Z_]+)=([ynm])} $line foo var value] {
                        if { $value == "y" } then { set cmd "global $var; set $var 1" }
                        if { $value == "n" } then { set cmd "global $var; set $var 0" }
                        if { $value == "m" } then { set cmd "global $var; set $var 2" }
                        eval $cmd
                }
                if [regexp {# ([0-9A-Z_]+) is not set} $line foo var] {
                        set cmd "global $var; set $var 0"
                        eval $cmd
                }
        }
        close $file1
        update_choices
        update_mainmenu .rdupd
}
proc write_comment { file1 file2 text } {
        puts $file1 ""
        puts $file1 "#"
        puts $file1 "# $text"
        puts $file1 "#"
        puts $file2 "/*"
        puts $file2 " * $text"
        puts $file2 " */"
}

proc write_variable { file1 file2 varname variable dep } {
        if { $variable == 0 } \
                then { puts $file1 "# $varname is not set"; \
                       puts $file2 "#undef $varname"} \
        elseif { $variable == 2 || ($dep == 2 && $variable == 1) } \
                then { puts $file1 "$varname=m"; \
                       puts $file2 "#undef $varname"  } \
        elseif { $variable == 1 && $dep != 2 } \
                then { puts $file1 "$varname=y"; \
                       puts $file2 "#define $varname 1" } \
        else { \
            error "Attempting to write value for variable that is not configured ($varname)." \
        }
}

proc bool {w mnum line text variable} {
        frame $w.x$line
        global modbutton_width
        global modbutton_height
        radiobutton $w.x$line.y -text "y" -variable $variable -value 1 \
                -width 2 -command "update_menu$mnum .menu$mnum"
        radiobutton $w.x$line.n -text "n"  -variable $variable -value 0 \
                -width 2 -command "update_menu$mnum .menu$mnum"
        canvas $w.x$line.m -width $modbutton_width -relief raised \
                -height $modbutton_height
        button $w.x$line.help -text "Help" -relief raised \
                -command "dohelp .dohelp $variable"
        pack $w.x$line.y $w.x$line.m  -anchor w -side left
        button $w.x$line.l -text "$text" -relief raised 
        pack $w.x$line.n $w.x$line.help $w.x$line.l -anchor w -side left
        pack $w.x$line -anchor w
#
# If we don't know the size yet, update the screen and calculate the size
# of the 'm' button by measuring the size of the 'y' button.  The buttons
# have fixed size anyways, so it should always be correct.
#
        if { $modbutton_width == 0 } then {
                update
                set modbutton_width [winfo width $w.x$line.y]
                set modbutton_height [winfo height $w.x$line.y]
                $w.x$line.m configure -height $modbutton_height \
                        -width $modbutton_width
        }
}

proc int { w mnum line text variable } {
        frame $w.x$line
        button $w.x$line.help -text "Help" -relief raised \
                -command "dohelp .dohelp $variable "
        button $w.x$line.l -text "$text" -relief raised 
        entry $w.x$line.x -width 15 -relief sunken -borderwidth 2 \
                -textvariable $variable
        pack $w.x$line.x $w.x$line.help $w.x$line.l -anchor w -side left
        pack $w.x$line -anchor w
}

proc comment {w line text } {
#nothing done for comments now.
}

proc do_make { w line option dir target target } {
#nothing to do for now.
}

proc dohelp {w varname }  {
        catch {destroy $w}
        toplevel $w -class Dialog

        set filefound 0
        set found 0
        set lineno 0
        if { [file readable Documentation/Configure.help] == 1} then {
                set f [open Documentation/Configure.help r]
                set filefound 1 
                while {![eof $f]} {
                        gets $f line
                        set line1 [string trim $line]
                        if { $line1 == $varname } then {
                                set found 1
                        } else {
                                if { $found == 0 } continue 
                        }
                        if { [string length $line1 ] == 0 } break
                        if { [string  range $line1 0 0 ] == "#" } continue
                        if { $lineno == 0 } then {
                            append message $line1
                            append message ":"
                        } else {
                            append message " "
                            append message $line1
                        }
                        set lineno [expr $lineno + 1]
                }
                close $f
        }

        if { $found == 0 } then {
                if { $filefound == 0 } then {
                message $w.m -width 750 -aspect 300 -text \
                        "No help available - unable to open file Documentation/Configure.help.  This file is available from http://math-www.uni-paderborn.de/~axel/config_help.html or ftp://sunsite.unc.edu/pub/Linux/kernel/config/krnl_cnfg_hlp_1.X.XX.tgz"  -relief raised -fg black
                } else {
                message $w.m -width 400 -aspect 300 -text \
                        "No help available for $varname"  -relief raised -fg black
                }
                label $w.bm -bitmap error
                pack $w.bm $w.m -pady 10 -side top -padx 10
                wm title $w "RTFM" 
        } else {
                message $w.m -width 400 -aspect 300 -text $message \
                         -relief raised -fg black
                label $w.bm -bitmap info
                pack $w.bm $w.m -pady 10 -side top -padx 10
                wm title $w "Configuration help" 
        }
        set oldFocus [focus]
        frame $w.f
        button $w.f.back -text "OK" -activebackground green \
                -width 10 -command "destroy $w; focus $oldFocus"
        pack $w.f.back -side bottom -pady 10 -anchor s
        pack $w.f -pady 10 -side top -padx 10 -anchor s
        focus $w
        global winx; global winy
        set winx [expr [winfo x .]+30]; set winy [expr [winfo y .]+30]
        wm geometry $w +$winx+$winy
}

proc wrapup {w }  {
        catch {destroy $w}
        toplevel $w -class Dialog
        message $w.m -width 400 -aspect 300 -text \
                "The linux kernel is now hopefully configured for your setup. Check the top-level Makefile for additional configuration, and do a 'make dep ; make clean' if you want to be sure all the files are correctly re-made."  -relief raised -fg black
        label $w.bm -bitmap info
        pack $w.bm $w.m -pady 10 -side top -padx 10
        wm title $w "Kernel build instructions" 

        set oldFocus [focus]
        frame $w.f
        button $w.f.back -text "OK" -activebackground green \
                -width 10 -command "exit"
        pack $w.f.back -side bottom -pady 10 -anchor s
        pack $w.f -pady 10 -side top -padx 10 -anchor s
        focus $w
        global winx; global winy
        set winx [expr [winfo x .]+30]; set winy [expr [winfo y .]+30]
        wm geometry $w +$winx+$winy

}

proc check_sound_config { num } {
#nothing for now.
}

proc tristate {w mnum line text variable } {
        frame $w.x$line
        radiobutton $w.x$line.y -text "y" -variable $variable -value 1 \
                -width 2 -command "update_menu$mnum .menu$mnum"
        radiobutton $w.x$line.n -text "n"  -variable $variable -value 0 \
                -width 2 -command "update_menu$mnum .menu$mnum"
        radiobutton $w.x$line.m -text "m"  -variable $variable -value 2 \
                -width 2 -command "update_menu$mnum .menu$mnum"
        button $w.x$line.help -text "Help" -relief raised \
                -command "dohelp .dohelp $variable"
        button $w.x$line.l -text "$text" -relief raised 
        pack $w.x$line.y $w.x$line.m $w.x$line.n $w.x$line.help $w.x$line.l -anchor w -side left
        pack $w.x$line -anchor w
}

proc dep_tristate {w mnum line text variable } {
        frame $w.x$line
        radiobutton $w.x$line.y -text "y" -variable $variable -value 1 \
                -width 2 -command "update_menu$mnum .menu$mnum"
        radiobutton $w.x$line.n -text "n"  -variable $variable -value 0 \
                -width 2 -command "update_menu$mnum .menu$mnum"
        radiobutton $w.x$line.m -text "m"  -variable $variable -value 2 \
                -width 2 -command "update_menu$mnum .menu$mnum"
        button $w.x$line.help -text "Help" -relief raised \
                -command "dohelp .dohelp $variable"
        button $w.x$line.l -text "$text" -relief raised 
        pack $w.x$line.y $w.x$line.m $w.x$line.n $w.x$line.help $w.x$line.l -anchor w -side left
        pack $w.x$line -anchor w
}


proc do_sound {w mnum line} {
        message $w.x$line -width 400 -aspect 300 -text "Note: The sound drivers cannot as of yet be configured via the X-based interface" -relief raised
        pack $w.x$line -side top -pady 10
}

#
# Next set up the particulars for the top level menu, and define a few
# buttons which we will stick down at the bottom.
#
frame .header
label .header.label 

frame .f0 


/* [previous][next][first][last][top][bottom][index][help] */