tag | line | file | source code |
ints | 3658 | drivers/block/floppy.c | void floppy_invert_dcl(int *ints,int param) |
ints | 3671 | drivers/block/floppy.c | static void daring(int *ints,int param) |
ints | 3687 | drivers/block/floppy.c | static void allow_drives(int *ints, int param) |
ints | 3693 | drivers/block/floppy.c | static void fdc2_adr(int *ints, int param) |
ints | 3702 | drivers/block/floppy.c | static void unex(int *ints,int param) |
ints | 3709 | drivers/block/floppy.c | static void set_cmos(int *ints, int dummy) |
ints | 3713 | drivers/block/floppy.c | if ( ints[0] != 2 ){ |
ints | 3717 | drivers/block/floppy.c | current_drive = ints[1]; |
ints | 3724 | drivers/block/floppy.c | if(ints[2] <= 0 || ints[2] >= NUMBER(default_drive_params)){ |
ints | 3725 | drivers/block/floppy.c | DPRINT1("bad cmos code %d\n", ints[2]); |
ints | 3728 | drivers/block/floppy.c | DP->cmos = ints[2]; |
ints | 3729 | drivers/block/floppy.c | DPRINT1("setting cmos code to %d\n", ints[2]); |
ints | 3734 | drivers/block/floppy.c | void (*fn)(int *ints, int param); |
ints | 3755 | drivers/block/floppy.c | void floppy_setup(char *str, int *ints) |
ints | 3762 | drivers/block/floppy.c | if (ints[0] ) |
ints | 3763 | drivers/block/floppy.c | param = ints[1]; |
ints | 3766 | drivers/block/floppy.c | config_params[i].fn(ints,param); |
ints | 3978 | drivers/block/floppy.c | extern char *get_options(char *str, int *ints); |
ints | 3987 | drivers/block/floppy.c | int ints[11]; |
ints | 4002 | drivers/block/floppy.c | setup(get_options(buffer,ints),ints); |
ints | 112 | drivers/block/hd.c | void hd_setup(char *str, int *ints) |
ints | 116 | drivers/block/hd.c | if (ints[0] != 3) |
ints | 120 | drivers/block/hd.c | bios_info[hdind].head = hd_info[hdind].head = ints[2]; |
ints | 121 | drivers/block/hd.c | bios_info[hdind].sect = hd_info[hdind].sect = ints[3]; |
ints | 122 | drivers/block/hd.c | bios_info[hdind].cyl = hd_info[hdind].cyl = ints[1]; |
ints | 124 | drivers/block/hd.c | bios_info[hdind].lzone = hd_info[hdind].lzone = ints[1]; |
ints | 125 | drivers/block/hd.c | bios_info[hdind].ctl = hd_info[hdind].ctl = (ints[2] > 8 ? 8 : 0); |
ints | 359 | drivers/cdrom/aztcd.c | void aztcd_setup(char *str, int *ints) |
ints | 360 | drivers/cdrom/aztcd.c | { if (ints[0] > 0) |
ints | 361 | drivers/cdrom/aztcd.c | azt_port = ints[1]; |
ints | 362 | drivers/cdrom/aztcd.c | if (ints[0] > 1) |
ints | 363 | drivers/cdrom/aztcd.c | azt_cont = ints[2]; |
ints | 2964 | drivers/cdrom/cdu31a.c | int *ints) |
ints | 2966 | drivers/cdrom/cdu31a.c | if (ints[0] > 0) |
ints | 2968 | drivers/cdrom/cdu31a.c | cdu31a_port = ints[1]; |
ints | 2970 | drivers/cdrom/cdu31a.c | if (ints[0] > 1) |
ints | 2972 | drivers/cdrom/cdu31a.c | cdu31a_irq = ints[2]; |
ints | 193 | drivers/cdrom/gscd.c | void gscd_setup (char *str, int *ints) |
ints | 195 | drivers/cdrom/gscd.c | if (ints[0] > 0) |
ints | 197 | drivers/cdrom/gscd.c | gscd_port = ints[1]; |
ints | 206 | drivers/cdrom/mcd.c | void mcd_setup(char *str, int *ints) |
ints | 208 | drivers/cdrom/mcd.c | if (ints[0] > 0) |
ints | 209 | drivers/cdrom/mcd.c | mcd_port = ints[1]; |
ints | 210 | drivers/cdrom/mcd.c | if (ints[0] > 1) |
ints | 211 | drivers/cdrom/mcd.c | mcd_irq = ints[2]; |
ints | 213 | drivers/cdrom/mcd.c | if (ints[0] > 2) |
ints | 214 | drivers/cdrom/mcd.c | mitsumi_bug_93_wait = ints[3]; |
ints | 1390 | drivers/cdrom/optcd.c | void optcd_setup(char *str, int *ints) { |
ints | 1391 | drivers/cdrom/optcd.c | if (ints[0] > 0) |
ints | 1392 | drivers/cdrom/optcd.c | optcd_port = ints[1]; |
ints | 214 | drivers/cdrom/sjcd.c | void sjcd_setup( char *str, int *ints ) |
ints | 216 | drivers/cdrom/sjcd.c | if (ints[0] > 0) |
ints | 217 | drivers/cdrom/sjcd.c | sjcd_port = ints[1]; |
ints | 218 | drivers/cdrom/sjcd.c | if (ints[0] > 1) |
ints | 219 | drivers/cdrom/sjcd.c | sjcd_irq = ints[2]; |
ints | 220 | drivers/cdrom/sjcd.c | if (ints[0] > 2) |
ints | 221 | drivers/cdrom/sjcd.c | sjcd_dma = ints[3]; |
ints | 1649 | drivers/cdrom/sonycd535.c | sonycd535_setup(char *strings, int *ints) |
ints | 1654 | drivers/cdrom/sonycd535.c | if (ints[0] > 0) |
ints | 1655 | drivers/cdrom/sonycd535.c | if (ints[0] != 0) |
ints | 1656 | drivers/cdrom/sonycd535.c | sony535_cd_base_io = ints[1]; |
ints | 1657 | drivers/cdrom/sonycd535.c | if (ints[0] > 1) |
ints | 1658 | drivers/cdrom/sonycd535.c | sony535_irq_used = ints[2]; |
ints | 50 | drivers/char/busmouse.c | void bmouse_setup(char *str, int *ints) |
ints | 52 | drivers/char/busmouse.c | if (ints[0] > 0) |
ints | 53 | drivers/char/busmouse.c | mouse_irq=ints[1]; |
ints | 336 | drivers/scsi/53c7,8xx.c | static void internal_setup(int board, int chip, char *str, int *ints) { |
ints | 351 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].data.normal.base = ints[1]; |
ints | 352 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].data.normal.io_port = ints[2]; |
ints | 353 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].data.normal.irq = ints[3]; |
ints | 354 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].data.normal.dma = (ints[0] >= 4) ? |
ints | 355 | drivers/scsi/53c7,8xx.c | ints[4] : DMA_NONE; |
ints | 356 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].options = (ints[0] >= 5) ? |
ints | 357 | drivers/scsi/53c7,8xx.c | ints[5] : 0; |
ints | 359 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].data.pci.bus = ints[1]; |
ints | 360 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].data.pci.device = ints[2]; |
ints | 361 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].data.pci.function = ints[3]; |
ints | 362 | drivers/scsi/53c7,8xx.c | overrides[commandline_current].options = (ints[0] >= 4) ? |
ints | 363 | drivers/scsi/53c7,8xx.c | ints[4] : 0; |
ints | 381 | drivers/scsi/53c7,8xx.c | void ncr53c##x##_setup (char *str, int *ints) { \ |
ints | 382 | drivers/scsi/53c7,8xx.c | internal_setup (BOARD_GENERIC, x, str, ints); \ |
ints | 584 | drivers/scsi/NCR53c406a.c | void NCR53c406a_setup(char *str, int *ints) |
ints | 595 | drivers/scsi/NCR53c406a.c | if (ints[0] < 1 || ints[0] > 3) { |
ints | 601 | drivers/scsi/NCR53c406a.c | if (ports[i] == ints[1]) { |
ints | 602 | drivers/scsi/NCR53c406a.c | port_base = ints[1]; |
ints | 606 | drivers/scsi/NCR53c406a.c | printk("NCR53c406a: Invalid PORTBASE 0x%X specified\n", ints[1]); |
ints | 610 | drivers/scsi/NCR53c406a.c | if (ints[0] > 1) { |
ints | 611 | drivers/scsi/NCR53c406a.c | if (ints[2] == 0) { |
ints | 617 | drivers/scsi/NCR53c406a.c | if (intrs[i] == ints[2]) { |
ints | 618 | drivers/scsi/NCR53c406a.c | irq_level = ints[2]; |
ints | 622 | drivers/scsi/NCR53c406a.c | printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]); |
ints | 625 | drivers/scsi/NCR53c406a.c | if (ints[0] > 2) |
ints | 626 | drivers/scsi/NCR53c406a.c | fast_pio = ints[3]; |
ints | 351 | drivers/scsi/aha152x.c | void aha152x_setup( char *str, int *ints ); |
ints | 534 | drivers/scsi/aha152x.c | void aha152x_setup( char *str, int *ints) |
ints | 539 | drivers/scsi/aha152x.c | setup_called=ints[0]; |
ints | 542 | drivers/scsi/aha152x.c | setup_portbase = ints[0] >= 1 ? ints[1] : 0x340; |
ints | 543 | drivers/scsi/aha152x.c | setup_irq = ints[0] >= 2 ? ints[2] : 11; |
ints | 544 | drivers/scsi/aha152x.c | setup_scsiid = ints[0] >= 3 ? ints[3] : 7; |
ints | 545 | drivers/scsi/aha152x.c | setup_reconnect = ints[0] >= 4 ? ints[4] : 1; |
ints | 546 | drivers/scsi/aha152x.c | setup_doparity = ints[0] >= 5 ? ints[5] : 1; |
ints | 548 | drivers/scsi/aha152x.c | setup_debug = ints[0] >= 6 ? ints[6] : DEBUG_DEFAULT; |
ints | 864 | drivers/scsi/aha1542.c | void aha1542_setup( char *str, int *ints) |
ints | 878 | drivers/scsi/aha1542.c | if (ints[0] < 1 || ints[0] > 4) |
ints | 885 | drivers/scsi/aha1542.c | setup_called[setup_idx]=ints[0]; |
ints | 888 | drivers/scsi/aha1542.c | setup_portbase = ints[0] >= 1 ? ints[1] : 0; /* Preserve the default value.. */ |
ints | 889 | drivers/scsi/aha1542.c | setup_buson [setup_idx] = ints[0] >= 2 ? ints[2] : 7; |
ints | 890 | drivers/scsi/aha1542.c | setup_busoff [setup_idx] = ints[0] >= 3 ? ints[3] : 5; |
ints | 891 | drivers/scsi/aha1542.c | if (ints[0] >= 4) { |
ints | 893 | drivers/scsi/aha1542.c | switch (ints[4]) { |
ints | 1544 | drivers/scsi/buslogic.c | void buslogic_setup(char *str, int *ints) |
ints | 1555 | drivers/scsi/buslogic.c | if (ints[0] != 1) { |
ints | 1561 | drivers/scsi/buslogic.c | if (valid_bases[i] == ints[1]) { |
ints | 1562 | drivers/scsi/buslogic.c | bases[setup_idx++] = ints[1]; |
ints | 1566 | drivers/scsi/buslogic.c | buslogic_printk("invalid base 0x%X specified.\n", ints[1]); |
ints | 357 | drivers/scsi/fdomain.c | static unsigned short ints[] = { 3, 5, 10, 11, 12, 14, 15, 0 }; |
ints | 467 | drivers/scsi/fdomain.c | void fdomain_setup( char *str, int *ints ) |
ints | 469 | drivers/scsi/fdomain.c | if (setup_called++ || ints[0] < 2 || ints[0] > 3) { |
ints | 474 | drivers/scsi/fdomain.c | port_base = ints[0] >= 1 ? ints[1] : 0; |
ints | 475 | drivers/scsi/fdomain.c | interrupt_level = ints[0] >= 2 ? ints[2] : 0; |
ints | 476 | drivers/scsi/fdomain.c | this_id = ints[0] >= 3 ? ints[3] : 0; |
ints | 597 | drivers/scsi/fdomain.c | return ints[ (options & 0x0e) >> 1 ]; |
ints | 100 | drivers/scsi/g_NCR5380.c | void generic_NCR5380_setup(char *str, int *ints) { |
ints | 102 | drivers/scsi/g_NCR5380.c | if (ints[0] != 2) |
ints | 106 | drivers/scsi/g_NCR5380.c | overrides[commandline_current].port = ints[1]; |
ints | 107 | drivers/scsi/g_NCR5380.c | overrides[commandline_current].irq = ints[2]; |
ints | 108 | drivers/scsi/g_NCR5380.c | overrides[commandline_current].dma = ints[3]; |
ints | 321 | drivers/scsi/pas16.c | void pas16_setup(char *str, int *ints) { |
ints | 324 | drivers/scsi/pas16.c | if (ints[0] != 2) |
ints | 328 | drivers/scsi/pas16.c | overrides[commandline_current].io_port = (unsigned short) ints[1]; |
ints | 329 | drivers/scsi/pas16.c | overrides[commandline_current].irq = ints[2]; |
ints | 331 | drivers/scsi/pas16.c | if (bases[i].io_port == (unsigned short) ints[1]) { |
ints | 360 | drivers/scsi/scsi.c | void scsi_luns_setup(char *str, int *ints) { |
ints | 361 | drivers/scsi/scsi.c | if (ints[0] != 1) |
ints | 364 | drivers/scsi/scsi.c | max_scsi_luns = ints[1]; |
ints | 142 | drivers/scsi/seagate.c | void st0x_setup (char *str, int *ints) { |
ints | 144 | drivers/scsi/seagate.c | base_address = (void *) ints[1]; |
ints | 145 | drivers/scsi/seagate.c | irq = ints[2]; |
ints | 148 | drivers/scsi/seagate.c | void tmc8xx_setup (char *str, int *ints) { |
ints | 150 | drivers/scsi/seagate.c | base_address = (void *) ints[1]; |
ints | 151 | drivers/scsi/seagate.c | irq = ints[2]; |
ints | 2033 | drivers/scsi/st.c | st_setup(char *str, int *ints) |
ints | 2035 | drivers/scsi/st.c | if (ints[0] > 0 && ints[1] > 0) |
ints | 2036 | drivers/scsi/st.c | st_buffer_size = ints[1] * ST_BLOCK_SIZE; |
ints | 2037 | drivers/scsi/st.c | if (ints[0] > 1 && ints[2] > 0) { |
ints | 2038 | drivers/scsi/st.c | st_write_threshold = ints[2] * ST_BLOCK_SIZE; |
ints | 2042 | drivers/scsi/st.c | if (ints[0] > 2 && ints[3] > 0) |
ints | 2043 | drivers/scsi/st.c | st_max_buffers = ints[3]; |
ints | 168 | drivers/scsi/t128.c | void t128_setup(char *str, int *ints) { |
ints | 171 | drivers/scsi/t128.c | if (ints[0] != 2) |
ints | 175 | drivers/scsi/t128.c | overrides[commandline_current].address = (unsigned char *) ints[1]; |
ints | 176 | drivers/scsi/t128.c | overrides[commandline_current].irq = ints[2]; |
ints | 178 | drivers/scsi/t128.c | if (bases[i].address == (unsigned char *) ints[1]) { |
ints | 333 | drivers/sound/dev_table.c | sound_setup (char *str, int *ints) |
ints | 344 | drivers/sound/dev_table.c | if (ints[0] == 0 || ints[1] == 0) |
ints | 350 | drivers/sound/dev_table.c | for (i = 1; i <= ints[0]; i++) |
ints | 355 | drivers/sound/dev_table.c | val = (unsigned int) ints[i]; |
ints | 498 | drivers/sound/dev_table.h | void sound_setup (char *str, int *ints); |
ints | 322 | drivers/sound/soundcard.c | int ints[21]; |
ints | 336 | drivers/sound/soundcard.c | ints[i + 1] = sound[i++]; |
ints | 337 | drivers/sound/soundcard.c | ints[0] = i; |
ints | 340 | drivers/sound/soundcard.c | sound_setup ("sound=", ints); |
ints | 18 | include/asm-i386/bugs.h | static void no_halt(char *s, int *ints) |
ints | 23 | include/asm-i386/bugs.h | static void no_387(char *s, int *ints) |
ints | 19 | include/linux/ioport.h | extern void reserve_setup(char *str, int *ints); |
ints | 49 | init/main.c | extern void swap_setup(char *str, int *ints); |
ints | 50 | init/main.c | extern void buff_setup(char *str, int *ints); |
ints | 51 | init/main.c | extern void bmouse_setup(char *str, int *ints); |
ints | 52 | init/main.c | extern void eth_setup(char *str, int *ints); |
ints | 53 | init/main.c | extern void xd_setup(char *str, int *ints); |
ints | 54 | init/main.c | extern void floppy_setup(char *str, int *ints); |
ints | 55 | init/main.c | extern void st_setup(char *str, int *ints); |
ints | 56 | init/main.c | extern void st0x_setup(char *str, int *ints); |
ints | 57 | init/main.c | extern void tmc8xx_setup(char *str, int *ints); |
ints | 58 | init/main.c | extern void t128_setup(char *str, int *ints); |
ints | 59 | init/main.c | extern void pas16_setup(char *str, int *ints); |
ints | 61 | init/main.c | extern void aha152x_setup(char *str, int *ints); |
ints | 62 | init/main.c | extern void aha1542_setup(char *str, int *ints); |
ints | 63 | init/main.c | extern void aic7xxx_setup(char *str, int *ints); |
ints | 64 | init/main.c | extern void buslogic_setup(char *str, int *ints); |
ints | 65 | init/main.c | extern void fdomain_setup(char *str, int *ints); |
ints | 66 | init/main.c | extern void NCR53c406a_setup(char *str, int *ints); |
ints | 67 | init/main.c | extern void scsi_luns_setup(char *str, int *ints); |
ints | 68 | init/main.c | extern void sound_setup(char *str, int *ints); |
ints | 70 | init/main.c | extern void cdu31a_setup(char *str, int *ints); |
ints | 73 | init/main.c | extern void mcd_setup(char *str, int *ints); |
ints | 76 | init/main.c | extern void mcdx_setup(char *str, int *ints); |
ints | 79 | init/main.c | extern void sbpcd_setup(char *str, int *ints); |
ints | 82 | init/main.c | extern void aztcd_setup(char *str, int *ints); |
ints | 85 | init/main.c | extern void sonycd535_setup(char *str, int *ints); |
ints | 88 | init/main.c | extern void gscd_setup(char *str, int *ints); |
ints | 91 | init/main.c | extern void cm206_setup(char *str, int *ints); |
ints | 94 | init/main.c | extern void optcd_setup(char *str, int *ints); |
ints | 97 | init/main.c | extern void sjcd_setup(char *str, int *ints); |
ints | 99 | init/main.c | static void ramdisk_setup(char *str, int *ints); |
ints | 130 | init/main.c | char *get_options(char *str, int *ints) |
ints | 136 | init/main.c | ints[i++] = simple_strtoul(cur,NULL,0); |
ints | 140 | init/main.c | ints[0] = i-1; |
ints | 144 | init/main.c | static void profile_setup(char *str, int *ints) |
ints | 146 | init/main.c | if (ints[0] > 0) |
ints | 147 | init/main.c | prof_shift = (unsigned long) ints[1]; |
ints | 257 | init/main.c | static void ramdisk_setup(char *str, int *ints) |
ints | 259 | init/main.c | if (ints[0] > 0 && ints[1] >= 0) |
ints | 260 | init/main.c | ramdisk_size = ints[1]; |
ints | 266 | init/main.c | int ints[11]; |
ints | 278 | init/main.c | bootsetups[i].setup_func(get_options(line+n,ints), ints); |
ints | 93 | kernel/ksyms.c | extern char *get_options(char *str, int *ints); |
ints | 132 | kernel/resource.c | void reserve_setup(char *str, int *ints) |
ints | 136 | kernel/resource.c | for (i = 1; i < ints[0]; i += 2) |
ints | 137 | kernel/resource.c | request_region(ints[i], ints[i+1], "reserved"); |
ints | 139 | mm/swap.c | void swap_setup(char *str, int *ints) |
ints | 152 | mm/swap.c | for (i=0; i < ints[0] && i < 8; i++) { |
ints | 153 | mm/swap.c | if (ints[i+1]) |
ints | 154 | mm/swap.c | *(swap_vars[i]) = ints[i+1]; |
ints | 159 | mm/swap.c | void buff_setup(char *str, int *ints) |
ints | 170 | mm/swap.c | for (i=0; i < ints[0] && i < 6; i++) { |
ints | 171 | mm/swap.c | if (ints[i+1]) |
ints | 172 | mm/swap.c | *(buff_vars[i]) = ints[i+1]; |
ints | 57 | net/ethernet/eth.c | void eth_setup(char *str, int *ints) |
ints | 67 | net/ethernet/eth.c | if (ints[0] > 0) |
ints | 68 | net/ethernet/eth.c | d->irq=ints[1]; |
ints | 69 | net/ethernet/eth.c | if (ints[0] > 1) |
ints | 70 | net/ethernet/eth.c | d->base_addr=ints[2]; |
ints | 71 | net/ethernet/eth.c | if (ints[0] > 2) |
ints | 72 | net/ethernet/eth.c | d->mem_start=ints[3]; |
ints | 73 | net/ethernet/eth.c | if (ints[0] > 3) |
ints | 74 | net/ethernet/eth.c | d->mem_end=ints[4]; |