root/drivers/char/ChangeLog

/* [previous][next][first][last][top][bottom][index][help] */
Sat Nov  4 17:14:45 1995    <tytso@rsts-11.mit.edu>

        * tty_io.c (tty_init): Move registration of TTY_MAJOR and
                TTY_AUX_MAJOR to the end, so that /proc/devices looks
                prettier. 

        * pty.c (pty_init): Use new major numbers for PTY master and slave
                devices.  This allow us to have more than 64 pty's.  We
                register the old pty devices for backwards compatibility.
                Note that a system should either be using the old pty
                devices or the new pty devices --- in general, it should
                try to use both, since they map into the same pty table.
                The old pty devices are strictly for backwards compatibility.

Wed Oct 11 12:45:24 1995    <tytso@rsts-11.mit.edu>

        * tty_io.c (disassociate_ctty): If dissassociate_ctty is called by
                exit, perform an implicit vhangup on the tty.

        * pty.c (pty_close): When the master pty is closed, send a hangup
                to the slave pty.
                (pty_open): Use the flag TTY_SLAVE_CLOSED to test to see
                if there are any open slave ptys, instead of using
                tty->link->count.  The old method got confused if there
                were processes that had hung-up file descriptors on the
                slave tty.

Tue May  2 00:53:25 1995    <tytso@rsx-11.mit.edu>

        * tty_io.c (tty_set_ldisc): Wait until the output buffer is
                drained before closing the old line discipline --- needed
                in only one case: XON/XOFF processing.

        * n_tty.c (n_tty_close): Don't bother waiting until the output
                driver is closed; in general, the line discipline
                shouldn't care if the hardware is finished
                transmitting before the line discipline terminates.

        * tty_io.c (release_dev): Shutdown the line discipline after
                decrementing the tty count variable; but set the
                TTY_CLOSING flag so that we know that this tty structure
                isn't long for this world.

        * tty_io.c (init_dev): Add sanity code to check to see if
                TTY_CLOSING is set on a tty structure; if so, something
                bad has happened (probably a line discipline close blocked
                when it shouldn't have; so do a kernel printk and then
                return an error).

Wed Apr 26 10:23:44 1995  Theodore Y. Ts'o  <tytso@localhost>

        * tty_io.c (release_dev): Try to shutdown the line discipline
                *before* decrementing the tty count variable; this removes
                a potential race condition which occurs when the line
                discipline close blocks, and another process then tries
                open the same serial port.

        * serial.c (rs_hangup): When hanging up, flush the output buffer
                before shutting down the UART.  Otherwise the line
                discipline close blocks waiting for the characters to get
                flushed, which never happens until the serial port gets reused.

Wed Apr 12 08:06:16 1995  Theodore Y. Ts'o  <tytso@localhost>

        * serial.c (do_serial_hangup, do_softint, check_modem_status,
                rs_init):  Hangups are now scheduled via a separate tqueue
                structure in the async_struct structure, tqueue_hangup.
                This task is pushed on to the tq_schedule queue, so that
                it is processed synchronously by the scheduler.

Sat Feb 18 12:13:51 1995  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_io.c (disassociate_ctty, tty_open, tty_ioctl): Clear
                current->tty_old_pgrp field when a session leader
                acquires a controlling tty, and after a session leader
                has disassociated from a controlling tty.

Fri Feb 17 09:34:09 1995  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_interrupt_single, rs_interrupt, rs_interrupt_multi): 
                Change the the number of passes made from 64 to be 256,
                configurable with the #define RS_ISR_PASS_LIMIT.

        * serial.c (rs_init, set_serial_info, get_serial_info, rs_close):
                Remove support for closing_wait2.  Instead, set
                tty->closing and rely on the line discipline to prevent
                echo wars.

        * n_tty.c (n_tty_receive_char):  IEXTEN does not need to be
                enabled in order for IXANY to be active.

                If tty->closing is set, then only process XON and XOFF
                characters.

Sun Feb 12 23:57:48 1995  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_timer): Change the interrupt poll time from 60
                seconds to 10 seconds, configurable with the #define
                RS_STROBE_TIME.

        * serial.c (rs_interrupt_multi, startup, shutdown, rs_ioctl,
                set_multiport_struct, get_multiport_struct): Add
                provisions for a new type of interrupt service routine,
                which better supports multiple serial ports on a single
                IRQ.  

Sun Feb  5 19:35:11 1995  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_ioctl.c (n_tty_ioctl, set_termios, tty_wait_until_sent): 
        * serial.c (rs_ioctl, rs_close): 
        * cyclades.c (cy_ioctl, cy_close): 
        * n_tty.c (n_tty_close):  Rename wait_until_sent to
                tty_wait_until_sent, so that it's a better name to export
                in ksyms.c.

Sat Feb  4 23:36:20 1995  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_close): Added missing check for closing_wait2 being
                ASYNC_CLOSING_WAIT_NONE.

Thu Jan 26 09:02:49 1995  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_init, set_serial_info, get_serial_info,
                rs_close): Support close_wait in the serial driver.
                This is helpful for slow devices (like serial
                plotters) so that their outputs don't get flushed upon
                device close.  This has to be configurable because
                normally we don't want ports to be hung up for long
                periods of time during a close when they are not
                connected to a device, or the device is powered off.

                The default is to wait 30 seconds; in the case of a
                very slow device, the close_wait timeout should be
                lengthened.  If it is set to 0, the kernel will wait
                forever for all of the data to be transmitted.

Thu Jan 17 01:17:20 1995  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (startup, change_speed, rs_init): Add support to detect
                the StarTech 16650 chip.  Treat it as a 16450 for now,
                because of its FIFO bugs.

Thu Jan  5 21:21:57 1995  <dhinds@allegro.stanford.edu>

        * serial.c: (receive_char): Added counter to prevent infinite loop
                when a PCMCIA serial device is ejected.

Thu Dec 29 17:53:48 1994    <tytso@rsx-11.mit.edu>

        * tty_io.c (check_tty_count): New procedure which checks
                tty->count to make sure that it matches with the number of
                open file descriptors which point at the structure.  If
                the number doesn't match, it prints a warning message.

Wed Dec 28 15:41:51 1994    <tytso@rsx-11.mit.edu>

        * tty_io.c (do_tty_hangup, disassociate_ctty): At hangup time,
                save the tty's current foreground process group in the
                session leader's task structure.  When the session leader
                terminates, send a SIGHUP, SIGCONT to that process group.
                This is not required by POSIX, but it's not prohibited
                either, and it appears to be the least intrusive way
                to fix a problem that dialup servers have with
                orphaned process groups caused by modem hangups.

Thu Dec  8 14:52:11 1994    <tytso@rsx-11.mit.edu>

        * serial.c (rs_ioctl): Don't allow most ioctl's if the serial port
                isn't initialized.

        * serial.c (rs_close): Don't clear the IER if the serial port
                isn't initialized. 

        * serial.c (block_til_ready): Don't try to block on the dialin
                port if the serial port isn't initialized.

Wed Dec  7 10:48:30 1994  Si Park (si@wimpol.demon.co.uk)
        * tty_io.c (tty_register_driver): Fix bug when linking onto
                the tty_drivers list. We now test that there are elements
                already on the list before setting the back link from the
                first element to the new driver.

        * tty_io.c (tty_unregister_driver): Fix bug in unlinking the
                specified driver from the tty_drivers list. We were not
                setting the back link correctly. This used to result in
                a dangling back link pointer and cause panics on the next
                call to get_tty_driver().

Tue Nov 29 10:21:09 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_io.c (tty_unregister_driver): Fix bug in
                tty_unregister_driver where the pointer to the refcount is
                tested, instead of the refcount itself.  This caused
                tty_unregister_driver to always return EBUSY.

Sat Nov 26 11:59:24 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_io.c (tty_ioctl): Add support for the new ioctl
                TIOCTTYGSTRUCT, which allow a kernel debugging program
                direct read access to the tty and tty_driver structures.

Fri Nov 25 17:26:22 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_set_termios): Don't wake up processes blocked in
                open when the CLOCAL flag changes, since a blocking
                open only samples the CLOCAL flag once when it blocks,
                and doesn't check it again.  (n.b.  FreeBSD has a
                different behavior for blocking opens; it's not clear
                whether Linux or FreeBSD's interpretation is correct.
                POSIX doesn't give clear guidance on this issue, so
                this may change in the future....)

        * serial.c (block_til_ready): Use the correct termios structure to
                check the CLOCAL flag.  If the cuaXX device is active,
                then check the saved termios for the ttySXX device.
                Otherwise, use the currently active termios structure.

Sun Nov  6 21:05:44 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (change_speed): Add support for direct access of
                57,600 and 115,200 bps.

Wed Nov  2 10:32:36 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * n_tty.c (n_tty_receive_room): Only allow excess characters
                through if we are in ICANON mode *and* there are other no
                pending lines in the buffer.  Otherwise cut and paste over
                4k breaks.

Sat Oct 29 18:17:34 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_ioctl, get_lsr_info): Added patch suggested by Arne
                Riiber so that user mode programs can tell when the
                transmitter shift register is empty.

Thu Oct 27 23:14:29 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_ioctl.c (wait_until_sent): Added debugging printk statements
                (under the #ifdef TTY_DEBUG_WAIT_UNTIL_SENT)  

        * serial.c (rs_interrupt, rs_interrupt_single, receive_chars,
                change_speed, rs_close): rs_close now disables receiver
                interrupts when closing the serial port.  This allows the
                serial port to close quickly when Linux and a modem (or a
                mouse) are engaged in an echo war; when closing the serial
                port, we now first stop listening to incoming characters,
                and *then* wait for the transmit buffer to drain.  

                In order to make this change, the info->read_status_mask
                is now used to control what bits of the line status
                register are looked at in the interrupt routine in all
                cases; previously it was only used in receive_chars to
                select a few of the status bits.

Mon Oct 24 23:36:21 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_close): Add a timeout to the transmitter flush
                loop; this is just a sanity check in case we have flaky
                (or non-existent-but-configured-by-the-user) hardware.

Fri Oct 21 09:37:23 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_io.c (tty_fasync): When asynchronous I/O is enabled, if the
                process or process group has not be specified yet, set it
                to be the tty's process group, or if that is not yet set,
                to the current process's pid.

Thu Oct 20 23:17:28 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * n_tty.c (n_tty_receive_room): If we are doing input
                canonicalization, let as many characters through as
                possible, so that the excess characters can be "beeped".

Tue Oct 18 10:02:43 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_start): Removed an incorrect '!' that was
                preventing transmit interrupts from being re-enabled in
                rs_start().  Fortunately in most cases it would be
                re-enabled elsewhere, but this still should be fixed
                correctly.

Sun Oct  9 23:46:03 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_io.c (do_tty_hangup): If the tty driver flags
                TTY_DRIVER_RESET_TERMIOS is set, then reset the termios
                settings back to the driver's initial configuration.  This
                allows the termios settings to be reset even if a process
                has hung up file descriptors keeping a pty's termios from
                being freed and reset.

        * tty_io.c (release_dev): Fix memory leak.  The pty's other
                termios structure should also be freed.

        * serial.c (rs_close, shutdown): Change how we wait for the
                transmitter to completely drain before shutting down the
                serial port.  We now do it by scheduling in another
                process instead of busy looping with the interrupts turned
                on.  This may eliminate some race condition problems that
                some people seem to be reporting.

Sun Sep 25 14:18:14 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_io.c (release_dev): When freeing a tty make sure that both
                the tty and the o_tty (if present) aren't a process's
                controlling tty.  (Previously, we only checked the tty.)

        * serial.c (change_speed): Only enable the Modem Status
                Interrupt for a port if CLOCAL is not set or CRTSCTS
                is set.  If we're not checking the carrier detect and
                CTS line, there's no point in enabling the modem
                status interrupt.  This will save spurious interrupts
                from slowing down systems who have terminals that
                don't support either line.  (Of course, if you want
                only one of CD and CTS support, you will need a
                properly wired serial cable.)

Thu Sep 22 08:32:48 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_io.c (do_SAK): Return if tty is null.

        * tty_io.c (_tty_name): Return "NULL tty" if the passed in tty is
                NULL.

Sat Sep 17 13:19:25 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_ioctl.c (n_tty_ioctl): Fix TIOCGLCKTRMIOS and
                TIOCSLCKTRMIOS, which were totally broken.  Remove
                extra indirection from argument; it should be a struct
                termios *, not a struct termios **.
                &real_tty->termios_locked should have been
                real_tty->termios_locked.  This caused us to be
                reading and writing the termios_locked structure to
                random places in kernel memory.  

        * tty_io.c (release_dev): Oops!  Forgot to delete a critical kfree
                of the locked_termios.  This leaves the locked_termios
                structure pointed at a freed object.  

Fri Sep 16 08:13:25 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * tty_io.c (tty_open): Don't check for an exclusive open until
                after the device specific open routine has been called.
                Otherwise, the serial device ref counting will be screwed
                up.

        * serial.c (rs_open, block_til_ready): Don't set termios structure
                until after block_til_ready has returned successfully.
                Modify block_til_ready to check the normal_termios
                structure directly, so it doesn't rely on termios being
                set before it's called.

Thu Sep 15 23:34:01 1994  Theodore Y. Ts'o  (tytso@rt-11)

        * serial.c (rs_close): Turn off interrupts during rs_close() to
                prevent a race condition with the hangup code (which
                runs during a software interrupt).

        * tty_io.c (release_dev): Don't free the locked_termios structure;
                its state must be retained across device opens.


        * tty_io.c (tty_unregister_driver): Added function to unregister a
                tty driver.  (For loadable device drivers.)



/* [previous][next][first][last][top][bottom][index][help] */