root/drivers/net/smc-ultra.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. ultra_probe
  2. ultra_probe1
  3. ultra_open
  4. ultra_reset_8390
  5. ultra_get_8390_hdr
  6. ultra_block_input
  7. ultra_block_output
  8. ultra_close_card
  9. init_module
  10. cleanup_module

   1 /* smc-ultra.c: A SMC Ultra ethernet driver for linux. */
   2 /*
   3         Written 1993,1994,1995 by Donald Becker.
   4 
   5         Copyright 1993 United States Government as represented by the
   6         Director, National Security Agency.
   7 
   8         This software may be used and distributed according to the terms
   9         of the GNU Public License, incorporated herein by reference.
  10 
  11         The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
  12         Center of Excellence in Space Data and Information Sciences
  13                 Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
  14 
  15         This is a driver for the SMC Ultra and SMC EtherEZ ethercards.
  16 
  17         This driver uses the cards in the 8390-compatible, shared memory mode.
  18         Most of the run-time complexity is handled by the generic code in
  19         8390.c.  The code in this file is responsible for
  20 
  21                 ultra_probe()           Detecting and initializing the card.
  22                 ultra_probe1()  
  23 
  24                 ultra_open()            The card-specific details of starting, stopping
  25                 ultra_reset_8390()      and resetting the 8390 NIC core.
  26                 ultra_close()
  27 
  28                 ultra_block_input()             Routines for reading and writing blocks of
  29                 ultra_block_output()    packet buffer memory.
  30 
  31         This driver enables the shared memory only when doing the actual data
  32         transfers to avoid a bug in early version of the card that corrupted
  33         data transferred by a AHA1542.
  34 
  35         This driver does not support the programmed-I/O data transfer mode of
  36         the EtherEZ.  That support (if available) is smc-ez.c.  Nor does it
  37         use the non-8390-compatible "Altego" mode. (No support currently planned.)
  38 
  39         Changelog:
  40 
  41         Paul Gortmaker  : multiple card support for module users.
  42 */
  43 
  44 static const char *version =
  45         "smc-ultra.c:v1.12 1/18/95 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";
  46 
  47 
  48 #include <linux/module.h>
  49 
  50 #include <linux/kernel.h>
  51 #include <linux/sched.h>
  52 #include <linux/errno.h>
  53 #include <linux/string.h>
  54 #include <asm/io.h>
  55 #include <asm/system.h>
  56 
  57 #include <linux/netdevice.h>
  58 #include <linux/etherdevice.h>
  59 #include "8390.h"
  60 
  61 /* A zero-terminated list of I/O addresses to be probed. */
  62 static unsigned int ultra_portlist[] =
  63 {0x200, 0x220, 0x240, 0x280, 0x300, 0x340, 0x380, 0};
  64 
  65 int ultra_probe(struct device *dev);
  66 int ultra_probe1(struct device *dev, int ioaddr);
  67 
  68 static int ultra_open(struct device *dev);
  69 static void ultra_reset_8390(struct device *dev);
  70 static void ultra_get_8390_hdr(struct device *dev, struct e8390_pkt_hdr *hdr, 
  71                                                 int ring_page);
  72 static void ultra_block_input(struct device *dev, int count,
  73                                                   struct sk_buff *skb, int ring_offset);
  74 static void ultra_block_output(struct device *dev, int count,
  75                                                         const unsigned char *buf, const start_page);
  76 static int ultra_close_card(struct device *dev);
  77 
  78 
  79 #define START_PG                0x00    /* First page of TX buffer */
  80 
  81 #define ULTRA_CMDREG    0               /* Offset to ASIC command register. */
  82 #define  ULTRA_RESET    0x80    /* Board reset, in ULTRA_CMDREG. */
  83 #define  ULTRA_MEMENB   0x40    /* Enable the shared memory. */
  84 #define ULTRA_NIC_OFFSET  16    /* NIC register offset from the base_addr. */
  85 #define ULTRA_IO_EXTENT 32
  86 
  87 /*      Probe for the Ultra.  This looks like a 8013 with the station
  88         address PROM at I/O ports <base>+8 to <base>+13, with a checksum
  89         following.
  90 */
  91 #ifdef HAVE_DEVLIST
  92 struct netdev_entry ultra_drv =
  93 {"ultra", ultra_probe1, NETCARD_IO_EXTENT, netcard_portlist};
  94 #else
  95 
  96 int ultra_probe(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
  97 {
  98         int i;
  99         int base_addr = dev ? dev->base_addr : 0;
 100 
 101         if (base_addr > 0x1ff)          /* Check a single specified location. */
 102                 return ultra_probe1(dev, base_addr);
 103         else if (base_addr != 0)        /* Don't probe at all. */
 104                 return ENXIO;
 105 
 106         for (i = 0; ultra_portlist[i]; i++) {
 107                 int ioaddr = ultra_portlist[i];
 108                 if (check_region(ioaddr, ULTRA_IO_EXTENT))
 109                         continue;
 110                 if (ultra_probe1(dev, ioaddr) == 0)
 111                         return 0;
 112         }
 113 
 114         return ENODEV;
 115 }
 116 #endif
 117 
 118 int ultra_probe1(struct device *dev, int ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 119 {
 120         int i;
 121         int checksum = 0;
 122         const char *model_name;
 123         unsigned char eeprom_irq = 0;
 124         static unsigned version_printed = 0;
 125         /* Values from various config regs. */
 126         unsigned char num_pages, irqreg, addr;
 127         unsigned char idreg = inb(ioaddr + 7);
 128         unsigned char reg4 = inb(ioaddr + 4) & 0x7f;
 129 
 130         /* Check the ID nibble. */
 131         if ((idreg & 0xF0) != 0x20                      /* SMC Ultra */
 132                 && (idreg & 0xF0) != 0x40)              /* SMC EtherEZ */
 133                 return ENODEV;
 134 
 135         /* Select the station address register set. */
 136         outb(reg4, ioaddr + 4);
 137 
 138         for (i = 0; i < 8; i++)
 139                 checksum += inb(ioaddr + 8 + i);
 140         if ((checksum & 0xff) != 0xFF)
 141                 return ENODEV;
 142 
 143         /* We should have a "dev" from Space.c or the static module table. */
 144         if (dev == NULL) {
 145                 printk("smc-ultra.c: Passed a NULL device.\n");
 146                 dev = init_etherdev(0, 0);
 147         }
 148 
 149         if (ei_debug  &&  version_printed++ == 0)
 150                 printk(version);
 151 
 152         model_name = (idreg & 0xF0) == 0x20 ? "SMC Ultra" : "SMC EtherEZ";
 153 
 154         printk("%s: %s at %#3x,", dev->name, model_name, ioaddr);
 155 
 156         for (i = 0; i < 6; i++)
 157                 printk(" %2.2X", dev->dev_addr[i] = inb(ioaddr + 8 + i));
 158 
 159         /* Switch from the station address to the alternate register set and
 160            read the useful registers there. */
 161         outb(0x80 | reg4, ioaddr + 4);
 162 
 163         /* Enabled FINE16 mode to avoid BIOS ROM width mismatches @ reboot. */
 164         outb(0x80 | inb(ioaddr + 0x0c), ioaddr + 0x0c);
 165         irqreg = inb(ioaddr + 0xd);
 166         addr = inb(ioaddr + 0xb);
 167 
 168         /* Switch back to the station address register set so that the MS-DOS driver
 169            can find the card after a warm boot. */
 170         outb(reg4, ioaddr + 4);
 171 
 172         if (dev->irq < 2) {
 173                 unsigned char irqmap[] = {0, 9, 3, 5, 7, 10, 11, 15};
 174                 int irq;
 175 
 176                 /* The IRQ bits are split. */
 177                 irq = irqmap[((irqreg & 0x40) >> 4) + ((irqreg & 0x0c) >> 2)];
 178 
 179                 if (irq == 0) {
 180                         printk(", failed to detect IRQ line.\n");
 181                         return -EAGAIN;
 182                 }
 183                 dev->irq = irq;
 184                 eeprom_irq = 1;
 185         }
 186 
 187         /* Allocate dev->priv and fill in 8390 specific dev fields. */
 188         if (ethdev_init(dev)) {
 189                 printk (", no memory for dev->priv.\n");
 190                 return -ENOMEM;
 191         }
 192  
 193         /* OK, we are certain this is going to work.  Setup the device. */
 194         request_region(ioaddr, ULTRA_IO_EXTENT, model_name);
 195 
 196         /* The 8390 isn't at the base address, so fake the offset */
 197         dev->base_addr = ioaddr+ULTRA_NIC_OFFSET;
 198 
 199         {
 200                 int addr_tbl[4] = {0x0C0000, 0x0E0000, 0xFC0000, 0xFE0000};
 201                 short num_pages_tbl[4] = {0x20, 0x40, 0x80, 0xff};
 202 
 203                 dev->mem_start = ((addr & 0x0f) << 13) + addr_tbl[(addr >> 6) & 3] ;
 204                 num_pages = num_pages_tbl[(addr >> 4) & 3];
 205         }
 206 
 207         ei_status.name = model_name;
 208         ei_status.word16 = 1;
 209         ei_status.tx_start_page = START_PG;
 210         ei_status.rx_start_page = START_PG + TX_PAGES;
 211         ei_status.stop_page = num_pages;
 212 
 213         dev->rmem_start = dev->mem_start + TX_PAGES*256;
 214         dev->mem_end = dev->rmem_end
 215                 = dev->mem_start + (ei_status.stop_page - START_PG)*256;
 216 
 217         printk(",%s IRQ %d memory %#lx-%#lx.\n", eeprom_irq ? "" : "assigned ",
 218                    dev->irq, dev->mem_start, dev->mem_end-1);
 219 
 220         ei_status.reset_8390 = &ultra_reset_8390;
 221         ei_status.block_input = &ultra_block_input;
 222         ei_status.block_output = &ultra_block_output;
 223         ei_status.get_8390_hdr = &ultra_get_8390_hdr;
 224         dev->open = &ultra_open;
 225         dev->stop = &ultra_close_card;
 226         NS8390_init(dev, 0);
 227 
 228         return 0;
 229 }
 230 
 231 static int
 232 ultra_open(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 233 {
 234         int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC addr */
 235 
 236         if (request_irq(dev->irq, ei_interrupt, 0, ei_status.name))
 237                 return -EAGAIN;
 238 
 239         outb(ULTRA_MEMENB, ioaddr);     /* Enable memory, 16 bit mode. */
 240         outb(0x80, ioaddr + 5);
 241         outb(0x01, ioaddr + 6);         /* Enable interrupts and memory. */
 242         ei_open(dev);
 243         MOD_INC_USE_COUNT;
 244         return 0;
 245 }
 246 
 247 static void
 248 ultra_reset_8390(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 249 {
 250         int cmd_port = dev->base_addr - ULTRA_NIC_OFFSET; /* ASIC base addr */
 251 
 252         outb(ULTRA_RESET, cmd_port);
 253         if (ei_debug > 1) printk("resetting Ultra, t=%ld...", jiffies);
 254         ei_status.txing = 0;
 255 
 256         outb(ULTRA_MEMENB, cmd_port);
 257 
 258         if (ei_debug > 1) printk("reset done\n");
 259         return;
 260 }
 261 
 262 /* Grab the 8390 specific header. Similar to the block_input routine, but
 263    we don't need to be concerned with ring wrap as the header will be at
 264    the start of a page, so we optimize accordingly. */
 265 
 266 static void
 267 ultra_get_8390_hdr(struct device *dev, struct e8390_pkt_hdr *hdr, int ring_page)
     /* [previous][next][first][last][top][bottom][index][help] */
 268 {
 269 
 270         unsigned long hdr_start = dev->mem_start + ((ring_page - START_PG)<<8);
 271 
 272         outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET);  /* shmem on */
 273 #ifdef notdef
 274         /* Officially this is what we are doing, but the readl() is faster */
 275         memcpy_fromio(hdr, hdr_start, sizeof(struct e8390_pkt_hdr));
 276 #else
 277         ((unsigned int*)hdr)[0] = readl(hdr_start);
 278 #endif
 279         outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* shmem off */
 280 }
 281 
 282 /* Block input and output are easy on shared memory ethercards, the only
 283    complication is when the ring buffer wraps. */
 284 
 285 static void
 286 ultra_block_input(struct device *dev, int count, struct sk_buff *skb, int ring_offset)
     /* [previous][next][first][last][top][bottom][index][help] */
 287 {
 288         unsigned long xfer_start = dev->mem_start + ring_offset - (START_PG<<8);
 289 
 290         /* Enable shared memory. */
 291         outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET);
 292 
 293         if (xfer_start + count > dev->rmem_end) {
 294                 /* We must wrap the input move. */
 295                 int semi_count = dev->rmem_end - xfer_start;
 296                 memcpy_fromio(skb->data, xfer_start, semi_count);
 297                 count -= semi_count;
 298                 memcpy_fromio(skb->data + semi_count, dev->rmem_start, count);
 299         } else {
 300                 /* Packet is in one chunk -- we can copy + cksum. */
 301                 eth_io_copy_and_sum(skb, xfer_start, count, 0);
 302         }
 303 
 304         outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET);  /* Disable memory. */
 305 }
 306 
 307 static void
 308 ultra_block_output(struct device *dev, int count, const unsigned char *buf,
     /* [previous][next][first][last][top][bottom][index][help] */
 309                                 int start_page)
 310 {
 311         unsigned long shmem = dev->mem_start + ((start_page - START_PG)<<8);
 312 
 313         /* Enable shared memory. */
 314         outb(ULTRA_MEMENB, dev->base_addr - ULTRA_NIC_OFFSET);
 315 
 316         memcpy_toio(shmem, buf, count);
 317 
 318         outb(0x00, dev->base_addr - ULTRA_NIC_OFFSET); /* Disable memory. */
 319 }
 320 
 321 static int
 322 ultra_close_card(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 323 {
 324         int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET; /* CMDREG */
 325 
 326         dev->start = 0;
 327         dev->tbusy = 1;
 328 
 329         if (ei_debug > 1)
 330                 printk("%s: Shutting down ethercard.\n", dev->name);
 331 
 332         outb(0x00, ioaddr + 6);         /* Disable interrupts. */
 333         free_irq(dev->irq);
 334         irq2dev_map[dev->irq] = 0;
 335 
 336         NS8390_init(dev, 0);
 337 
 338         /* We should someday disable shared memory and change to 8-bit mode
 339            "just in case"... */
 340 
 341         MOD_DEC_USE_COUNT;
 342 
 343         return 0;
 344 }
 345 
 346 
 347 #ifdef MODULE
 348 #define MAX_ULTRA_CARDS 4       /* Max number of Ultra cards per module */
 349 #define NAMELEN         8       /* # of chars for storing dev->name */
 350 static char namelist[NAMELEN * MAX_ULTRA_CARDS] = { 0, };
 351 static struct device dev_ultra[MAX_ULTRA_CARDS] = {
 352         {
 353                 NULL,           /* assign a chunk of namelist[] below */
 354                 0, 0, 0, 0,
 355                 0, 0,
 356                 0, 0, 0, NULL, NULL
 357         },
 358 };
 359 
 360 static int io[MAX_ULTRA_CARDS] = { 0, };
 361 static int irq[MAX_ULTRA_CARDS]  = { 0, };
 362 
 363 /* This is set up so that only a single autoprobe takes place per call.
 364 ISA device autoprobes on a running machine are not recommended. */
 365 int
 366 init_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
 367 {
 368         int this_dev, found = 0;
 369 
 370         for (this_dev = 0; this_dev < MAX_ULTRA_CARDS; this_dev++) {
 371                 struct device *dev = &dev_ultra[this_dev];
 372                 dev->name = namelist+(NAMELEN*this_dev);
 373                 dev->irq = irq[this_dev];
 374                 dev->base_addr = io[this_dev];
 375                 dev->init = ultra_probe;
 376                 if (io[this_dev] == 0)  {
 377                         if (this_dev != 0) break; /* only autoprobe 1st one */
 378                         printk(KERN_NOTICE "smc-ultra.c: Presently autoprobing (not recommended) for a single card.\n");
 379                 }
 380                 if (register_netdev(dev) != 0) {
 381                         printk(KERN_WARNING "smc-ultra.c: No SMC Ultra card found (i/o = 0x%x).\n", io[this_dev]);
 382                         if (found != 0) return 0;       /* Got at least one. */
 383                         return -ENXIO;
 384                 }
 385                 found++;
 386         }
 387 
 388         return 0;
 389 }
 390 
 391 void
 392 cleanup_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
 393 {
 394         int this_dev;
 395 
 396         for (this_dev = 0; this_dev < MAX_ULTRA_CARDS; this_dev++) {
 397                 struct device *dev = &dev_ultra[this_dev];
 398                 if (dev->priv != NULL) {
 399                         /* NB: ultra_close_card() does free_irq + irq2dev */
 400                         int ioaddr = dev->base_addr - ULTRA_NIC_OFFSET;
 401                         kfree(dev->priv);
 402                         dev->priv = NULL;
 403                         release_region(ioaddr, ULTRA_IO_EXTENT);
 404                         unregister_netdev(dev);
 405                 }
 406         }
 407 }
 408 #endif /* MODULE */
 409 
 410 
 411 /*
 412  * Local variables:
 413  *  compile-command: "gcc -D__KERNEL__ -Wall -O6 -I/usr/src/linux/net/inet -c smc-ultra.c"
 414  *  version-control: t
 415  *  kept-new-versions: 5
 416  *  c-indent-level: 4
 417  *  tab-width: 4
 418  * End:
 419  */

/* [previous][next][first][last][top][bottom][index][help] */