root/include/linux/scsi.h

/* [previous][next][first][last][top][bottom][index][help] */

INCLUDED FROM


   1 #ifndef _LINUX_SCSI_H
   2 #define _LINUX_SCSI_H
   3 
   4 /*
   5  * This header file contains public constants and structures used by
   6  * the scsi code for linux.
   7  */
   8 
   9 /*
  10     $Header: /usr/src/linux/include/linux/RCS/scsi.h,v 1.3 1993/09/24 12:20:33 drew Exp $
  11 
  12     For documentation on the OPCODES, MESSAGES, and SENSE values,
  13     please consult the SCSI standard.
  14 
  15 */
  16 
  17 /*
  18  *      SCSI opcodes
  19  */
  20 
  21 #define TEST_UNIT_READY       0x00
  22 #define REZERO_UNIT           0x01
  23 #define REQUEST_SENSE         0x03
  24 #define FORMAT_UNIT           0x04
  25 #define READ_BLOCK_LIMITS     0x05
  26 #define REASSIGN_BLOCKS       0x07
  27 #define READ_6                0x08
  28 #define WRITE_6               0x0a
  29 #define SEEK_6                0x0b
  30 #define READ_REVERSE          0x0f
  31 #define WRITE_FILEMARKS       0x10
  32 #define SPACE                 0x11
  33 #define INQUIRY               0x12
  34 #define RECOVER_BUFFERED_DATA 0x14
  35 #define MODE_SELECT           0x15
  36 #define RESERVE               0x16
  37 #define RELEASE               0x17
  38 #define COPY                  0x18
  39 #define ERASE                 0x19
  40 #define MODE_SENSE            0x1a
  41 #define START_STOP            0x1b
  42 #define RECEIVE_DIAGNOSTIC    0x1c
  43 #define SEND_DIAGNOSTIC       0x1d
  44 #define ALLOW_MEDIUM_REMOVAL  0x1e
  45 
  46 #define SET_WINDOW            0x24
  47 #define READ_CAPACITY         0x25
  48 #define READ_10               0x28
  49 #define WRITE_10              0x2a
  50 #define SEEK_10               0x2b
  51 #define WRITE_VERIFY          0x2e
  52 #define VERIFY                0x2f
  53 #define SEARCH_HIGH           0x30
  54 #define SEARCH_EQUAL          0x31
  55 #define SEARCH_LOW            0x32
  56 #define SET_LIMITS            0x33
  57 #define PRE_FETCH             0x34
  58 #define READ_POSITION         0x34
  59 #define SYNCHRONIZE_CACHE     0x35
  60 #define LOCK_UNLOCK_CACHE     0x36
  61 #define READ_DEFECT_DATA      0x37
  62 #define MEDIUM_SCAN           0x38
  63 #define COMPARE               0x39
  64 #define COPY_VERIFY           0x3a
  65 #define WRITE_BUFFER          0x3b
  66 #define READ_BUFFER           0x3c
  67 #define UPDATE_BLOCK          0x3d
  68 #define READ_LONG             0x3e
  69 #define WRITE_LONG            0x3f
  70 #define CHANGE_DEFINITION     0x40
  71 #define WRITE_SAME            0x41
  72 #define LOG_SELECT            0x4c
  73 #define LOG_SENSE             0x4d
  74 #define MODE_SELECT_10        0x55
  75 #define MODE_SENSE_10         0x5a
  76 #define READ_12               0xa8
  77 #define WRITE_12              0xaa
  78 #define WRITE_VERIFY_12       0xae
  79 #define SEARCH_HIGH_12        0xb0
  80 #define SEARCH_EQUAL_12       0xb1
  81 #define SEARCH_LOW_12         0xb2
  82 #define SEND_VOLUME_TAG       0xb6
  83 #define WRITE_LONG_2          0xea
  84 
  85 /*
  86  *  Status codes
  87  */
  88 
  89 #define GOOD                 0x00
  90 #define CHECK_CONDITION      0x01
  91 #define CONDITION_GOOD       0x02
  92 #define BUSY                 0x04
  93 #define INTERMEDIATE_GOOD    0x08
  94 #define INTERMEDIATE_C_GOOD  0x0a
  95 #define RESERVATION_CONFLICT 0x0c
  96 #define QUEUE_FULL           0x1a
  97 
  98 #define STATUS_MASK          0x1e
  99 
 100 /*
 101  *  SENSE KEYS
 102  */
 103 
 104 #define NO_SENSE            0x00
 105 #define RECOVERED_ERROR     0x01
 106 #define NOT_READY           0x02
 107 #define MEDIUM_ERROR        0x03
 108 #define HARDWARE_ERROR      0x04
 109 #define ILLEGAL_REQUEST     0x05
 110 #define UNIT_ATTENTION      0x06
 111 #define DATA_PROTECT        0x07
 112 #define BLANK_CHECK         0x08
 113 #define COPY_ABORTED        0x0a
 114 #define ABORTED_COMMAND     0x0b
 115 #define VOLUME_OVERFLOW     0x0d
 116 #define MISCOMPARE          0x0e
 117 
 118 
 119 /*
 120  *  DEVICE TYPES
 121  */
 122 
 123 #define TYPE_DISK           0x00
 124 #define TYPE_TAPE           0x01
 125 #define TYPE_PROCESSOR      0x03    /* HP scanners use this */
 126 #define TYPE_WORM           0x04    /* Treated as ROM by our system */
 127 #define TYPE_ROM            0x05
 128 #define TYPE_SCANNER        0x06
 129 #define TYPE_MOD            0x07    /* Magneto-optical disk - 
 130                                      * - treated as TYPE_DISK */
 131 #define TYPE_NO_LUN         0x7f
 132 
 133 
 134 /*
 135  *  MESSAGE CODES
 136  */
 137 
 138 #define COMMAND_COMPLETE    0x00
 139 #define EXTENDED_MESSAGE    0x01
 140 #define     EXTENDED_MODIFY_DATA_POINTER    0x00
 141 #define     EXTENDED_SDTR                   0x01
 142 #define     EXTENDED_EXTENDED_IDENTIFY      0x02    /* SCSI-I only */
 143 #define     EXTENDED_WDTR                   0x03
 144 #define SAVE_POINTERS       0x02
 145 #define RESTORE_POINTERS    0x03
 146 #define DISCONNECT          0x04
 147 #define INITIATOR_ERROR     0x05
 148 #define ABORT               0x06
 149 #define MESSAGE_REJECT      0x07
 150 #define NOP                 0x08
 151 #define MSG_PARITY_ERROR    0x09
 152 #define LINKED_CMD_COMPLETE 0x0a
 153 #define LINKED_FLG_CMD_COMPLETE 0x0b
 154 #define BUS_DEVICE_RESET    0x0c
 155 
 156 #define INITIATE_RECOVERY   0x0f            /* SCSI-II only */
 157 #define RELEASE_RECOVERY    0x10            /* SCSI-II only */
 158 
 159 #define SIMPLE_QUEUE_TAG    0x20
 160 #define HEAD_OF_QUEUE_TAG   0x21
 161 #define ORDERED_QUEUE_TAG   0x22
 162 
 163 /*
 164  * Here are some scsi specific ioctl commands which are sometimes useful.
 165  */
 166 /* These are a few other constants  only used by scsi  devices */
 167 
 168 #define SCSI_IOCTL_GET_IDLUN 0x5382
 169 
 170 /* Used to turn on and off tagged queuing for scsi devices */
 171 
 172 #define SCSI_IOCTL_TAGGED_ENABLE 0x5383
 173 #define SCSI_IOCTL_TAGGED_DISABLE 0x5384
 174 
 175 /* Used to obtain the host number of a device. */
 176 #define SCSI_IOCTL_PROBE_HOST 0x5385
 177 
 178 
 179 /*
 180  * Overrides for Emacs so that we follow Linus's tabbing style.
 181  * Emacs will notice this stuff at the end of the file and automatically
 182  * adjust the settings for this buffer only.  This must remain at the end
 183  * of the file.
 184  * ---------------------------------------------------------------------------
 185  * Local variables:
 186  * c-indent-level: 4 
 187  * c-brace-imaginary-offset: 0
 188  * c-brace-offset: -4
 189  * c-argdecl-indent: 4
 190  * c-label-offset: -4
 191  * c-continued-statement-offset: 4
 192  * c-continued-brace-offset: 0
 193  * indent-tabs-mode: nil
 194  * tab-width: 8
 195  * End:
 196  */
 197 
 198 #endif

/* [previous][next][first][last][top][bottom][index][help] */