root/drivers/net/tulip.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. dec21040_init
  2. tulip_probe
  3. tulip_probe1
  4. tulip_open
  5. tulip_init_ring
  6. tulip_start_xmit
  7. tulip_interrupt
  8. tulip_rx
  9. tulip_close
  10. tulip_get_stats
  11. set_multicast_list
  12. set_mac_address
  13. init_module
  14. cleanup_module

   1 /* tulip.c: A DEC 21040 ethernet driver for linux. */
   2 /*
   3    NOTICE: this version works with kernels 1.1.82 and later only!
   4         Written 1994,1995 by Donald Becker.
   5 
   6         This software may be used and distributed according to the terms
   7         of the GNU Public License, incorporated herein by reference.
   8 
   9         This driver is for the SMC EtherPower PCI ethernet adapter.
  10         It should work with most other DEC 21*40-based ethercards.
  11 
  12         The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O
  13         Center of Excellence in Space Data and Information Sciences
  14            Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771
  15 */
  16 
  17 static const char *version = "tulip.c:v0.05 1/20/95 becker@cesdis.gsfc.nasa.gov\n";
  18 
  19 #include <linux/module.h>
  20 
  21 #include <linux/kernel.h>
  22 #include <linux/sched.h>
  23 #include <linux/string.h>
  24 #include <linux/ptrace.h>
  25 #include <linux/errno.h>
  26 #include <linux/ioport.h>
  27 #include <linux/malloc.h>
  28 #include <linux/interrupt.h>
  29 #include <linux/pci.h>
  30 #include <linux/bios32.h>
  31 #include <asm/bitops.h>
  32 #include <asm/io.h>
  33 #include <asm/dma.h>
  34 
  35 #include <linux/netdevice.h>
  36 #include <linux/etherdevice.h>
  37 #include <linux/skbuff.h>
  38 
  39 /* The total size is unusually large: The 21040 aligns each of its 16
  40    longword-wide registers on a quadword boundary. */
  41 #define TULIP_TOTAL_SIZE 0x80
  42 
  43 #ifdef HAVE_DEVLIST
  44 struct netdev_entry tulip_drv =
  45 {"Tulip", tulip_pci_probe, TULIP_TOTAL_SIZE, NULL};
  46 #endif
  47 
  48 #define TULIP_DEBUG 1
  49 #ifdef TULIP_DEBUG
  50 int tulip_debug = TULIP_DEBUG;
  51 #else
  52 int tulip_debug = 1;
  53 #endif
  54 
  55 /*
  56                                 Theory of Operation
  57 
  58 I. Board Compatibility
  59 
  60 This device driver is designed for the DECchip 21040 "Tulip", Digital's
  61 single-chip ethernet controller for PCI, as used on the SMC EtherPower
  62 ethernet adapter.
  63 
  64 II. Board-specific settings
  65 
  66 PCI bus devices are configured by the system at boot time, so no jumpers
  67 need to be set on the board.  The system BIOS should be set to assign the
  68 PCI INTA signal to an otherwise unused system IRQ line.  While it's
  69 physically possible to shared PCI interrupt lines, the kernel doesn't
  70 support it. 
  71 
  72 III. Driver operation
  73 
  74 IIIa. Ring buffers
  75 The Tulip can use either ring buffers or lists of Tx and Rx descriptors.
  76 The current driver uses a statically allocated Rx ring of descriptors and
  77 buffers, and a list of the Tx buffers.
  78 
  79 IIIC. Synchronization
  80 The driver runs as two independent, single-threaded flows of control.  One
  81 is the send-packet routine, which enforces single-threaded use by the
  82 dev->tbusy flag.  The other thread is the interrupt handler, which is single
  83 threaded by the hardware and other software.
  84 
  85 The send packet thread has partial control over the Tx ring and 'dev->tbusy'
  86 flag.  It sets the tbusy flag whenever it's queuing a Tx packet. If the next
  87 queue slot is empty, it clears the tbusy flag when finished otherwise it sets
  88 the 'tp->tx_full' flag.
  89 
  90 The interrupt handler has exclusive control over the Rx ring and records stats
  91 from the Tx ring.  (The Tx-done interrupt can't be selectively turned off, so
  92 we can't avoid the interrupt overhead by having the Tx routine reap the Tx
  93 stats.)  After reaping the stats, it marks the queue entry as empty by setting
  94 the 'base' to zero.      Iff the 'tp->tx_full' flag is set, it clears both the
  95 tx_full and tbusy flags.
  96 
  97 IV. Notes
  98 
  99 Thanks to Duke Kamstra of SMC for providing an EtherPower board.
 100 
 101 The DEC databook doesn't document which Rx filter settings accept broadcast
 102 packets.  Nor does it document how to configure the part to configure the
 103 serial subsystem for normal (vs. loopback) operation or how to have it
 104 autoswitch between internal 10baseT, SIA and AUI transceivers.
 105 
 106 The databook claims that CSR13, CSR14, and CSR15 should each be the last
 107 register of the set CSR12-15 written.   Hmmm, now how is that possible?
 108 */
 109 
 110 #define DEC_VENDOR_ID   0x1011          /* Hex 'D' :-> */
 111 #define DEC_21040_ID    0x0002          /* Change for 21140. */
 112 
 113 /* Keep the ring sizes a power of two for efficiency. */
 114 #define TX_RING_SIZE    4
 115 #define RX_RING_SIZE    4
 116 #define PKT_BUF_SZ              1536                    /* Size of each temporary Rx buffer.*/
 117 
 118 /* Offsets to the Command and Status Registers, "CSRs".  All accesses
 119    must be longword instructions and quadword aligned. */
 120 enum tulip_offsets {
 121         CSR0=0,    CSR1=0x08, CSR2=0x10, CSR3=0x18, CSR4=0x20, CSR5=0x28,
 122         CSR6=0x30, CSR7=0x38, CSR8=0x40, CSR9=0x48, CSR10=0x50, CSR11=0x58,
 123         CSR12=0x60, CSR13=0x68, CSR14=0x70, CSR15=0x78 };
 124 
 125 /* The Tulip Rx and Tx buffer descriptors. */
 126 struct tulip_rx_desc {
 127         int status;
 128         int length;
 129         char *buffer1, *buffer2;                        /* We use only buffer 1.  */
 130 };
 131 
 132 struct tulip_tx_desc {
 133         int status;
 134         int length;
 135         char *buffer1, *buffer2;                        /* We use only buffer 1.  */
 136 };
 137 
 138 struct tulip_private {
 139         char devname[8];                        /* Used only for kernel debugging. */
 140         struct tulip_rx_desc rx_ring[RX_RING_SIZE];
 141         struct tulip_tx_desc tx_ring[TX_RING_SIZE];
 142         /* The saved address of a sent-in-place packet/buffer, for skfree(). */
 143         struct sk_buff* tx_skbuff[TX_RING_SIZE];
 144         long rx_buffs;                          /* Address of temporary Rx buffers. */
 145         struct enet_statistics stats;
 146         int setup_frame[48];            /* Pseudo-Tx frame to init address table. */
 147         unsigned int cur_rx, cur_tx;            /* The next free ring entry */
 148         unsigned int dirty_rx, dirty_tx;        /* The ring entries to be free()ed. */
 149         unsigned int tx_full:1;
 150         int pad0, pad1;                                         /* Used for 8-byte alignment */
 151 };
 152 
 153 static void tulip_probe1(int ioaddr, int irq);
 154 static int tulip_open(struct device *dev);
 155 static void tulip_init_ring(struct device *dev);
 156 static int tulip_start_xmit(struct sk_buff *skb, struct device *dev);
 157 static int tulip_rx(struct device *dev);
 158 static void tulip_interrupt(int irq, struct pt_regs *regs);
 159 static int tulip_close(struct device *dev);
 160 static struct enet_statistics *tulip_get_stats(struct device *dev);
 161 static void set_multicast_list(struct device *dev);
 162 static int set_mac_address(struct device *dev, void *addr);
 163 
 164 
 165 
 166 #ifndef MODULE
 167 /* This 21040 probe is unlike most other board probes.  We can use memory
 168    efficiently by allocating a large contiguous region and dividing it
 169    ourselves.  This is done by having the initialization occur before
 170    the 'kmalloc()' memory management system is started. */
 171 
 172 int dec21040_init(void)
     /* [previous][next][first][last][top][bottom][index][help] */
 173 {
 174 
 175     if (pcibios_present()) {
 176             int pci_index;
 177                 for (pci_index = 0; pci_index < 8; pci_index++) {
 178                         unsigned char pci_bus, pci_device_fn, pci_irq_line;
 179                         unsigned long pci_ioaddr;
 180                 
 181                         if (pcibios_find_device (DEC_VENDOR_ID, DEC_21040_ID, pci_index,
 182                                                                          &pci_bus, &pci_device_fn) != 0)
 183                                 break;
 184                         pcibios_read_config_byte(pci_bus, pci_device_fn,
 185                                                                          PCI_INTERRUPT_LINE, &pci_irq_line);
 186                         pcibios_read_config_dword(pci_bus, pci_device_fn,
 187                                                                           PCI_BASE_ADDRESS_0, &pci_ioaddr);
 188                         /* Remove I/O space marker in bit 0. */
 189                         pci_ioaddr &= ~3;
 190                         if (tulip_debug > 2)
 191                                 printk("Found DEC PCI Tulip at I/O %#lx, IRQ %d.\n",
 192                                            pci_ioaddr, pci_irq_line);
 193                         tulip_probe1(pci_ioaddr, pci_irq_line);
 194                 }
 195         }
 196 
 197         return 0;
 198 }
 199 #endif
 200 #ifdef MODULE
 201 static int tulip_probe(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 202 {
 203         printk("tulip: This driver does not yet install properly from module!\n");
 204         return -1;
 205 }
 206 #endif
 207 
 208 static void tulip_probe1(int ioaddr, int irq)
     /* [previous][next][first][last][top][bottom][index][help] */
 209 {
 210         static int did_version = 0;                     /* Already printed version info. */
 211         struct device *dev;
 212         struct tulip_private *tp;
 213         int i;
 214 
 215         if (tulip_debug > 0  &&  did_version++ == 0)
 216                 printk(version);
 217 
 218         dev = init_etherdev(0, 0);
 219 
 220         printk("%s: DEC 21040 Tulip at %#3x,", dev->name, ioaddr);
 221 
 222         /* Stop the chip's Tx and Rx processes. */
 223         outl(inl(ioaddr + CSR6) & ~0x2002, ioaddr + CSR6);
 224         /* Clear the missed-packet counter. */
 225         inl(ioaddr + CSR8) & 0xffff;
 226 
 227         /* The station address ROM is read byte serially.  The register must
 228            be polled, waiting for the value to be read bit serially from the
 229            EEPROM.
 230            */
 231         outl(0, ioaddr + CSR9);         /* Reset the pointer with a dummy write. */
 232         for (i = 0; i < 6; i++) {
 233                 int value, boguscnt = 100000;
 234                 do
 235                         value = inl(ioaddr + CSR9);
 236                 while (value < 0  && --boguscnt > 0);
 237                 printk(" %2.2x", dev->dev_addr[i] = value);
 238         }
 239         printk(", IRQ %d\n", irq);
 240 
 241         /* We do a request_region() only to register /proc/ioports info. */
 242         request_region(ioaddr, TULIP_TOTAL_SIZE, "DEC Tulip Ethernet");
 243 
 244         dev->base_addr = ioaddr;
 245         dev->irq = irq;
 246 
 247         /* Make certain the data structures are quadword aligned. */
 248         tp = kmalloc(sizeof(*tp), GFP_KERNEL | GFP_DMA);
 249         dev->priv = tp;
 250         tp->rx_buffs = kmalloc(PKT_BUF_SZ*RX_RING_SIZE, GFP_KERNEL | GFP_DMA);
 251 
 252         /* The Tulip-specific entries in the device structure. */
 253         dev->open = &tulip_open;
 254         dev->hard_start_xmit = &tulip_start_xmit;
 255         dev->stop = &tulip_close;
 256         dev->get_stats = &tulip_get_stats;
 257         dev->set_multicast_list = &set_multicast_list;
 258         dev->set_mac_address = &set_mac_address;
 259 
 260         return;
 261 }
 262 
 263 
 264 static int
 265 tulip_open(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 266 {
 267         struct tulip_private *tp = (struct tulip_private *)dev->priv;
 268         int ioaddr = dev->base_addr;
 269 
 270         /* Reset the chip, holding bit 0 set at least 10 PCI cycles. */
 271         outl(0xfff80001, ioaddr + CSR0);
 272         SLOW_DOWN_IO;
 273         /* Deassert reset.  Set 8 longword cache alignment, 8 longword burst.
 274            Cache alignment bits 15:14        Burst length 13:8
 275         0000    No alignment  0x00000000 unlimited              0800 8 longwords
 276                 4000    8  longwords            0100 1 longword         1000 16 longwords
 277                 8000    16 longwords            0200 2 longwords        2000 32 longwords
 278                 C000    32  longwords           0400 4 longwords
 279            Wait the specified 50 PCI cycles after a reset by initializing
 280            Tx and Rx queues and the address filter list. */
 281         outl(0xfff84800, ioaddr + CSR0);
 282 
 283         if (irq2dev_map[dev->irq] != NULL
 284                 || (irq2dev_map[dev->irq] = dev) == NULL
 285                 || dev->irq == 0
 286                 || request_irq(dev->irq, &tulip_interrupt, 0, "DEC 21040 Tulip")) {
 287                 return -EAGAIN;
 288         }
 289 
 290         if (tulip_debug > 1)
 291                 printk("%s: tulip_open() irq %d.\n", dev->name, dev->irq);
 292 
 293         tulip_init_ring(dev);
 294 
 295         /* Fill the whole address filter table with our physical address. */
 296         { 
 297                 unsigned short *eaddrs = (unsigned short *)dev->dev_addr;
 298                 int *setup_frm = tp->setup_frame, i;
 299 
 300                 /* You must add the broadcast address when doing perfect filtering! */
 301                 *setup_frm++ = 0xffff;
 302                 *setup_frm++ = 0xffff;
 303                 *setup_frm++ = 0xffff;
 304                 /* Fill the rest of the accept table with our physical address. */
 305                 for (i = 1; i < 16; i++) {
 306                         *setup_frm++ = eaddrs[0];
 307                         *setup_frm++ = eaddrs[1];
 308                         *setup_frm++ = eaddrs[2];
 309                 }
 310                 /* Put the setup frame on the Tx list. */
 311                 tp->tx_ring[0].length = 0x08000000 | 192;
 312                 tp->tx_ring[0].buffer1 = (char *)tp->setup_frame;
 313                 tp->tx_ring[0].buffer2 = 0;
 314                 tp->tx_ring[0].status = 0x80000000;
 315 
 316                 tp->cur_tx++, tp->dirty_tx++;
 317         }
 318 
 319         outl((int)tp->rx_ring, ioaddr + CSR3);
 320         outl((int)tp->tx_ring, ioaddr + CSR4);
 321 
 322         /* Turn on the xcvr interface. */
 323         outl(0x00000000, ioaddr + CSR13);
 324         outl(0x00000004, ioaddr + CSR13);
 325 
 326         /* Start the chip's Tx and Rx processes. */
 327         outl(0xfffe2002, ioaddr + CSR6);
 328 
 329         /* Trigger an immediate transmit demand to process the setup frame. */
 330         outl(0, ioaddr + CSR1);
 331 
 332         dev->tbusy = 0;
 333         dev->interrupt = 0;
 334         dev->start = 1;
 335 
 336         /* Enable interrupts by setting the interrupt mask. */
 337         outl(0xFFFFFFFF, ioaddr + CSR7);
 338 
 339         if (tulip_debug > 2) {
 340                 printk("%s: Done tulip_open(), CSR0 %8.8x, CSR13 %8.8x.\n",
 341                            dev->name, inl(ioaddr + CSR0), inl(ioaddr + CSR13));
 342         }
 343         MOD_INC_USE_COUNT;
 344         return 0;
 345 }
 346 
 347 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
 348 static void
 349 tulip_init_ring(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 350 {
 351         struct tulip_private *tp = (struct tulip_private *)dev->priv;
 352         int i;
 353 
 354         tp->tx_full = 0;
 355         tp->cur_rx = tp->cur_tx = 0;
 356         tp->dirty_rx = tp->dirty_tx = 0;
 357 
 358         for (i = 0; i < RX_RING_SIZE; i++) {
 359                 tp->rx_ring[i].status = 0x80000000;     /* Owned by Tulip chip */
 360                 tp->rx_ring[i].length = PKT_BUF_SZ;
 361                 tp->rx_ring[i].buffer1 = (char *)(tp->rx_buffs + i*PKT_BUF_SZ);
 362                 tp->rx_ring[i].buffer2 = (char *)&tp->rx_ring[i+1];
 363         }
 364         /* Mark the last entry as wrapping the ring. */ 
 365         tp->rx_ring[i-1].length = PKT_BUF_SZ | 0x02000000;
 366         tp->rx_ring[i-1].buffer2 = (char *)&tp->rx_ring[0];
 367 
 368         /* The Tx buffer descriptor is filled in as needed, but we
 369            do need to clear the ownership bit. */
 370         for (i = 0; i < TX_RING_SIZE; i++) {
 371                 tp->tx_ring[i].status = 0x00000000;
 372         }
 373 }
 374 
 375 static int
 376 tulip_start_xmit(struct sk_buff *skb, struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 377 {
 378         struct tulip_private *tp = (struct tulip_private *)dev->priv;
 379         int ioaddr = dev->base_addr;
 380         int entry;
 381 
 382         /* Transmitter timeout, serious problems. */
 383         if (dev->tbusy) {
 384                 int tickssofar = jiffies - dev->trans_start;
 385                 int i;
 386                 if (tickssofar < 20)
 387                         return 1;
 388                 printk("%s: transmit timed out, status %8.8x, SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
 389                            dev->name, inl(ioaddr + CSR5), inl(ioaddr + CSR12),
 390                            inl(ioaddr + CSR13), inl(ioaddr + CSR14), inl(ioaddr + CSR15));
 391                 printk("  Rx ring %8.8x: ", (int)tp->rx_ring);
 392                 for (i = 0; i < RX_RING_SIZE; i++)
 393                         printk(" %8.8x", (unsigned int)tp->rx_ring[i].status);
 394                 printk("\n  Tx ring %8.8x: ", (int)tp->tx_ring);
 395                 for (i = 0; i < TX_RING_SIZE; i++)
 396                         printk(" %8.8x", (unsigned int)tp->tx_ring[i].status);
 397                 printk("\n");
 398 
 399                 tp->stats.tx_errors++;
 400                 /* We should reinitialize the hardware here. */
 401                 dev->tbusy=0;
 402                 dev->trans_start = jiffies;
 403                 return 0;
 404         }
 405 
 406         if (skb == NULL || skb->len <= 0) {
 407                 printk("%s: Obsolete driver layer request made: skbuff==NULL.\n",
 408                            dev->name);
 409                 dev_tint(dev);
 410                 return 0;
 411         }
 412 
 413         /* Block a timer-based transmit from overlapping.  This could better be
 414            done with atomic_swap(1, dev->tbusy), but set_bit() works as well.
 415            If this ever occurs the queue layer is doing something evil! */
 416         if (set_bit(0, (void*)&dev->tbusy) != 0) {
 417                 printk("%s: Transmitter access conflict.\n", dev->name);
 418                 return 1;
 419         }
 420 
 421         /* Caution: the write order is important here, set the base address
 422            with the "ownership" bits last. */
 423 
 424         /* Calculate the next Tx descriptor entry. */
 425         entry = tp->cur_tx % TX_RING_SIZE;
 426 
 427         tp->tx_full = 1;
 428         tp->tx_skbuff[entry] = skb;
 429         tp->tx_ring[entry].length = skb->len |
 430                 (entry == TX_RING_SIZE-1 ? 0xe2000000 : 0xe0000000);
 431         tp->tx_ring[entry].buffer1 = skb->data;
 432         tp->tx_ring[entry].buffer2 = 0;
 433         tp->tx_ring[entry].status = 0x80000000; /* Pass ownership to the chip. */
 434 
 435         tp->cur_tx++;
 436 
 437         /* Trigger an immediate transmit demand. */
 438         outl(0, ioaddr + CSR1);
 439 
 440         dev->trans_start = jiffies;
 441 
 442         return 0;
 443 }
 444 
 445 /* The interrupt handler does all of the Rx thread work and cleans up
 446    after the Tx thread. */
 447 static void tulip_interrupt(int irq, struct pt_regs *regs)
     /* [previous][next][first][last][top][bottom][index][help] */
 448 {
 449         struct device *dev = (struct device *)(irq2dev_map[irq]);
 450         struct tulip_private *lp;
 451         int csr5, ioaddr, boguscnt=10;
 452 
 453         if (dev == NULL) {
 454                 printk ("tulip_interrupt(): irq %d for unknown device.\n", irq);
 455                 return;
 456         }
 457 
 458         ioaddr = dev->base_addr;
 459         lp = (struct tulip_private *)dev->priv;
 460         if (dev->interrupt)
 461                 printk("%s: Re-entering the interrupt handler.\n", dev->name);
 462 
 463         dev->interrupt = 1;
 464 
 465         do {
 466                 csr5 = inl(ioaddr + CSR5);
 467                 /* Acknowledge all of the current interrupt sources ASAP. */
 468                 outl(csr5 & 0x0001ffff, ioaddr + CSR5);
 469 
 470                 if (tulip_debug > 4)
 471                         printk("%s: interrupt  csr5=%#8.8x new csr5=%#8.8x.\n",
 472                                    dev->name, csr5, inl(dev->base_addr + CSR5));
 473 
 474                 if ((csr5 & 0x00018000) == 0)
 475                         break;
 476 
 477                 if (csr5 & 0x0040)                      /* Rx interrupt */
 478                         tulip_rx(dev);
 479 
 480                 if (csr5 & 0x0001) {            /* Tx-done interrupt */
 481                         int dirty_tx = lp->dirty_tx;
 482 
 483                         while (dirty_tx < lp->cur_tx) {
 484                                 int entry = dirty_tx % TX_RING_SIZE;
 485                                 int status = lp->tx_ring[entry].status;
 486 
 487                                 if (status < 0)
 488                                         break;                  /* It still hasn't been Txed */
 489 
 490                                 if (status & 0x8000) {
 491                                         /* There was an major error, log it. */
 492                                         lp->stats.tx_errors++;
 493                                         if (status & 0x4104) lp->stats.tx_aborted_errors++;
 494                                         if (status & 0x0C00) lp->stats.tx_carrier_errors++;
 495                                         if (status & 0x0200) lp->stats.tx_window_errors++;
 496                                         if (status & 0x0002) lp->stats.tx_fifo_errors++;
 497                                         if (status & 0x0080) lp->stats.tx_heartbeat_errors++;
 498 #ifdef ETHER_STATS
 499                                         if (status & 0x0100) lp->stats.collisions16++;
 500 #endif
 501                                 } else {
 502 #ifdef ETHER_STATS
 503                                         if (status & 0x0001) lp->stats.tx_deferred++;
 504 #endif
 505                                         lp->stats.collisions += (status >> 3) & 15;
 506                                         lp->stats.tx_packets++;
 507                                 }
 508 
 509                                 /* Free the original skb. */
 510                                 dev_kfree_skb(lp->tx_skbuff[entry], FREE_WRITE);
 511                                 dirty_tx++;
 512                         }
 513 
 514 #ifndef final_version
 515                         if (lp->cur_tx - dirty_tx >= TX_RING_SIZE) {
 516                                 printk("out-of-sync dirty pointer, %d vs. %d, full=%d.\n",
 517                                            dirty_tx, lp->cur_tx, lp->tx_full);
 518                                 dirty_tx += TX_RING_SIZE;
 519                         }
 520 #endif
 521 
 522                         if (lp->tx_full && dev->tbusy
 523                                 && dirty_tx > lp->cur_tx - TX_RING_SIZE + 2) {
 524                                 /* The ring is no longer full, clear tbusy. */
 525                                 lp->tx_full = 0;
 526                                 dev->tbusy = 0;
 527                                 mark_bh(NET_BH);
 528                         }
 529 
 530                         lp->dirty_tx = dirty_tx;
 531                 }
 532 
 533                 /* Log errors. */
 534                 if (csr5 & 0x8000) {    /* Abnormal error summary bit. */
 535                         if (csr5 & 0x0008) lp->stats.tx_errors++; /* Tx babble. */
 536                         if (csr5 & 0x0100) {            /* Missed a Rx frame. */
 537                                 lp->stats.rx_errors++;
 538                                 lp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff;
 539                         }
 540                         if (csr5 & 0x0800) {
 541                                 printk("%s: Something Wicked happened! %8.8x.\n",
 542                                            dev->name, csr5);
 543                                 /* Hmmmmm, it's not clear what to do here. */
 544                         }
 545                 }
 546                 if (--boguscnt < 0) {
 547                         printk("%s: Too much work at interrupt, csr5=0x%8.8x.\n",
 548                                    dev->name, csr5);
 549                         /* Clear all interrupt sources. */
 550                         outl(0x0001ffff, ioaddr + CSR5);
 551                         break;
 552                 }
 553         } while (1);
 554 
 555         if (tulip_debug > 3)
 556                 printk("%s: exiting interrupt, csr5=%#4.4x.\n",
 557                            dev->name, inl(ioaddr + CSR5));
 558 
 559         /* Special code for testing *only*. */
 560         {
 561                 static int stopit = 10;
 562                 if (dev->start == 0  &&  --stopit < 0) {
 563                         printk("%s: Emergency stop, looping startup interrupt.\n",
 564                                    dev->name);
 565                         free_irq(irq);
 566                 }
 567         }
 568 
 569         dev->interrupt = 0;
 570         return;
 571 }
 572 
 573 static int
 574 tulip_rx(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 575 {
 576         struct tulip_private *lp = (struct tulip_private *)dev->priv;
 577         int entry = lp->cur_rx % RX_RING_SIZE;
 578         int i;
 579                 
 580         if (tulip_debug > 4)
 581                 printk(" In tulip_rx().\n");
 582         /* If we own the next entry, it's a new packet. Send it up. */
 583         while (lp->rx_ring[entry].status >= 0) {
 584                 int status = lp->rx_ring[entry].status;
 585 
 586                 if (tulip_debug > 4)
 587                         printk("  tulip_rx() status was %8.8x.\n", status);
 588                 if ((status & 0x0300) != 0x0300) {
 589                         printk("%s: Ethernet frame spanned multiple buffers, status %8.8x!\n",
 590                                    dev->name, status);
 591                 } else if (status & 0x8000) {
 592                         /* There was a fatal error. */
 593                         lp->stats.rx_errors++; /* end of a packet.*/
 594                         if (status & 0x0890) lp->stats.rx_length_errors++;
 595                         if (status & 0x0004) lp->stats.rx_frame_errors++;
 596                         if (status & 0x0002) lp->stats.rx_crc_errors++;
 597                         if (status & 0x0001) lp->stats.rx_fifo_errors++;
 598                 } else {
 599                         /* Malloc up new buffer, compatible with net-2e. */
 600                         short pkt_len = lp->rx_ring[entry].status >> 16;
 601                         struct sk_buff *skb;
 602 
 603                         skb = dev_alloc_skb(pkt_len+2);
 604                         if (skb == NULL) {
 605                                 printk("%s: Memory squeeze, deferring packet.\n", dev->name);
 606                                 /* Check that at least two ring entries are free.
 607                                    If not, free one and mark stats->rx_dropped++. */
 608                                 for (i=0; i < RX_RING_SIZE; i++)
 609                                         if (lp->rx_ring[(entry+i) % RX_RING_SIZE].status < 0)
 610                                                 break;
 611 
 612                                 if (i > RX_RING_SIZE -2) {
 613                                         lp->stats.rx_dropped++;
 614                                         lp->rx_ring[entry].status = 0x80000000;
 615                                         lp->cur_rx++;
 616                                 }
 617                                 break;
 618                         }
 619                         skb->dev = dev;
 620                         skb_reserve(skb,2);     /* 16 byte align the data fields */
 621                         memcpy(skb_put(skb,pkt_len), lp->rx_ring[entry].buffer1, pkt_len);
 622                         skb->protocol=eth_type_trans(skb,dev);
 623                         netif_rx(skb);
 624                         lp->stats.rx_packets++;
 625                 }
 626 
 627                 lp->rx_ring[entry].status = 0x80000000;
 628                 entry = (++lp->cur_rx) % RX_RING_SIZE;
 629         }
 630 
 631         return 0;
 632 }
 633 
 634 static int
 635 tulip_close(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 636 {
 637         int ioaddr = dev->base_addr;
 638         struct tulip_private *tp = (struct tulip_private *)dev->priv;
 639 
 640         dev->start = 0;
 641         dev->tbusy = 1;
 642 
 643         if (tulip_debug > 1)
 644                 printk("%s: Shutting down ethercard, status was %2.2x.\n",
 645                            dev->name, inl(ioaddr + CSR5));
 646 
 647         /* Disable interrupts by clearing the interrupt mask. */
 648         outl(0x00000000, ioaddr + CSR7);
 649         /* Stop the chip's Tx and Rx processes. */
 650         outl(inl(ioaddr + CSR6) & ~0x2002, ioaddr + CSR6);
 651 
 652         tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff;
 653 
 654         free_irq(dev->irq);
 655         irq2dev_map[dev->irq] = 0;
 656 
 657         MOD_DEC_USE_COUNT;
 658         return 0;
 659 }
 660 
 661 static struct enet_statistics *
 662 tulip_get_stats(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 663 {
 664         struct tulip_private *tp = (struct tulip_private *)dev->priv;
 665         short ioaddr = dev->base_addr;
 666 
 667         tp->stats.rx_missed_errors += inl(ioaddr + CSR8) & 0xffff;
 668 
 669         return &tp->stats;
 670 }
 671 
 672 /*
 673  *      Set or clear the multicast filter for this adaptor.
 674  */
 675 
 676 static void set_multicast_list(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 677 {
 678         short ioaddr = dev->base_addr;
 679         int csr6 = inl(ioaddr + CSR6) & ~0x00D5;
 680 
 681         if (dev->flags&IFF_PROMISC) 
 682         {                       /* Set promiscuous. */
 683                 outl(csr6 | 0x00C0, ioaddr + CSR6);
 684                 /* Log any net taps. */
 685                 printk("%s: Promiscuous mode enabled.\n", dev->name);
 686         }
 687         else if (dev->mc_count > 15 || (dev->flags&IFF_ALLMULTI)) 
 688         {
 689                 /* Too many to filter perfectly -- accept all multicasts. */
 690                 outl(csr6 | 0x0080, ioaddr + CSR6);
 691         }
 692         else
 693         {
 694                 struct tulip_private *tp = (struct tulip_private *)dev->priv;
 695                 struct dev_mc_list *dmi=dev->mc_list;
 696                 int *setup_frm = tp->setup_frame;
 697                 unsigned short *eaddrs;
 698                 int i;
 699 
 700                 /* We have <= 15 addresses that we can use the wonderful
 701                    16 address perfect filtering of the Tulip.  Note that only
 702                    the low shortword of setup_frame[] is valid. */
 703                 outl(csr6 | 0x0000, ioaddr + CSR6);
 704                 i=0;
 705                 while(dmi) 
 706                 {
 707                         eaddrs=(unsigned short *)dmi->dmi_addr;
 708                         dmi=dmi->next;
 709                         i++;
 710                         *setup_frm++ = *eaddrs++;
 711                         *setup_frm++ = *eaddrs++;
 712                         *setup_frm++ = *eaddrs++;
 713                 }
 714                 /* Fill the rest of the table with our physical address. */
 715                 eaddrs = (unsigned short *)dev->dev_addr;
 716                 do {
 717                         *setup_frm++ = eaddrs[0];
 718                         *setup_frm++ = eaddrs[1];
 719                         *setup_frm++ = eaddrs[2];
 720                 } while (++i < 16);
 721 
 722                 /* Now add this frame to the Tx list. */
 723         }
 724 }
 725 
 726 static int
 727 set_mac_address(struct device *dev, void *addr)
     /* [previous][next][first][last][top][bottom][index][help] */
 728 {
 729         int i;
 730         struct sockaddr *sa=(struct sockaddr *)addr;
 731         if (dev->start)
 732                 return -EBUSY;
 733         printk("%s: Setting MAC address to ", dev->name);
 734         for (i = 0; i < 6; i++)
 735                 printk(" %2.2x", dev->dev_addr[i] = sa->sa_data[i]);
 736         printk(".\n");
 737         return 0;
 738 }
 739 
 740 #ifdef MODULE
 741 static char devicename[9] = { 0, };
 742 static struct device dev_tulip = {
 743         devicename, /* device name is inserted by linux/drivers/net/net_init.c */
 744         0, 0, 0, 0,
 745         0, 0,
 746         0, 0, 0, NULL, tulip_probe
 747 };
 748 
 749 static int io = 0;
 750 static int irq = 0;
 751 
 752 int init_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
 753 {
 754         printk("tulip: Sorry, modularization is not completed\n");
 755         return -EIO;
 756 #if 0
 757         if (io == 0)
 758           printk("tulip: You should not use auto-probing with insmod!\n");
 759         dev_tulip.base_addr = io;
 760         dev_tulip.irq       = irq;
 761         if (register_netdev(&dev_tulip) != 0) {
 762                 printk("tulip: register_netdev() returned non-zero.\n");
 763                 return -EIO;
 764         }
 765         return 0;
 766 #endif
 767 }
 768 
 769 void
 770 cleanup_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
 771 {
 772         unregister_netdev(&dev_tulip);
 773 }
 774 #endif /* MODULE */
 775 
 776 /*
 777  * Local variables:
 778  *  compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c tulip.c"
 779  *  c-indent-level: 4
 780  *  tab-width: 4
 781  * End:
 782  */

/* [previous][next][first][last][top][bottom][index][help] */