root/drivers/net/eth16i.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. eth16i_probe
  2. eth16i_probe1
  3. eth16i_initialize
  4. eth16i_probe_port
  5. eth16i_set_port
  6. eth16i_send_probe_packet
  7. eth16i_receive_probe_packet
  8. eth16i_get_irq
  9. eth16i_check_signature
  10. eth16i_read_eeprom
  11. eth16i_read_eeprom_word
  12. eth16i_eeprom_cmd
  13. eth16i_open
  14. eth16i_close
  15. eth16i_tx
  16. eth16i_rx
  17. eth16i_interrupt
  18. eth16i_multicast
  19. eth16i_get_stats
  20. eth16i_select_regbank
  21. init_module
  22. cleanup_module

   1 /* eth16i.c An ICL EtherTeam 16i and 32 EISA ethernet driver for Linux
   2 
   3    Written 1994-95 by Mika Kuoppala
   4 
   5    Copyright (C) 1994, 1995 by Mika Kuoppala
   6    Based on skeleton.c and at1700.c by Donald Becker
   7 
   8    This software may be used and distributed according to the terms
   9    of the GNU Public Licence, incorporated herein by reference.
  10 
  11    The author may be reached as miku@elt.icl.fi
  12 
  13    This driver supports following cards :
  14         - ICL EtherTeam 16i
  15         - ICL EtherTeam 32 EISA
  16 
  17    Sources:
  18      - skeleton.c  a sample network driver core for linux,
  19        written by Donald Becker <becker@CESDIS.gsfc.nasa.gov>
  20      - at1700.c a driver for Allied Telesis AT1700, written 
  21        by Donald Becker.
  22      - e16iSRV.asm a Netware 3.X Server Driver for ICL EtherTeam16i
  23        written by Markku Viima
  24      - The Fujitsu MB86965 databook.
  25    
  26    Valuable assistance from:
  27         Markku Viima (ICL) 
  28         Ari Valve (ICL)
  29    
  30    Revision history:
  31 
  32    Version      Date            Description
  33    
  34    0.01         15.12-94        Initial version (card detection)
  35    0.02         23.01-95        Interrupt is now hooked correctly
  36    0.03         01.02-95        Rewrote initialization part
  37    0.04         07.02-95        Base skeleton done...
  38                                 Made a few changes to signature checking
  39                                 to make it a bit reliable.
  40                                 - fixed bug in tx_buf mapping
  41                                 - fixed bug in initialization (DLC_EN
  42                                   wasn't enabled when initialization
  43                                   was done.)
  44    0.05         08.02-95        If there were more than one packet to send,
  45                                 transmit was jammed due to invalid
  46                                 register write...now fixed
  47    0.06         19.02-95        Rewrote interrupt handling        
  48    0.07         13.04-95        Wrote EEPROM read routines
  49                                 Card configuration now set according to
  50                                 data read from EEPROM
  51    0.08         23.06-95        Wrote part that tries to probe used interface
  52                                 port if AUTO is selected
  53 
  54    0.09         01.09-95        Added module support
  55    
  56    0.10         04.09-95        Fixed receive packet allocation to work         
  57                                 with kernels > 1.3.x
  58    
  59    0.20         20.09-95        Added support for EtherTeam32 EISA      
  60 
  61    0.21         17.10-95        Removed the unnecessary extern 
  62                                 init_etherdev() declaration. Some
  63                                 other cleanups.
  64    Bugs:
  65         In some cases the interface autoprobing code doesn't find 
  66         the correct interface type. In this case you can 
  67         manually choose the interface type in DOS with E16IC.EXE which is 
  68         configuration software for EtherTeam16i and EtherTeam32 cards.
  69         
  70    To do:
  71         - Real multicast support
  72 */
  73 
  74 static char *version = 
  75         "eth16i.c: v0.21 17-10-95 Mika Kuoppala (miku@elt.icl.fi)\n";
  76 
  77 #include <linux/module.h>
  78 
  79 #include <linux/kernel.h>
  80 #include <linux/sched.h>
  81 #include <linux/types.h>                  
  82 #include <linux/fcntl.h>                  
  83 #include <linux/interrupt.h>              
  84 #include <linux/ptrace.h>                 
  85 #include <linux/ioport.h>                 
  86 #include <linux/in.h>             
  87 #include <linux/malloc.h>                 
  88 #include <linux/string.h>                 
  89 #include <linux/errno.h>
  90 
  91 #include <linux/netdevice.h>
  92 #include <linux/etherdevice.h>
  93 #include <linux/skbuff.h>
  94 
  95 #include <asm/system.h>           
  96 #include <asm/bitops.h>           
  97 #include <asm/io.h>               
  98 #include <asm/dma.h>
  99 
 100 /* Few macros */
 101 #define BIT(a)                  ( (1 << (a)) )  
 102 #define BITSET(ioaddr, bnum)   ((outb(((inb(ioaddr)) | (bnum)), ioaddr))) 
 103 #define BITCLR(ioaddr, bnum)   ((outb(((inb(ioaddr)) & (~(bnum))), ioaddr)))
 104 
 105 /* This is the I/O address space for Etherteam 16i adapter. */
 106 #define ETH16I_IO_EXTENT 32
 107 
 108 /* Ticks before deciding that transmit has timed out */
 109 #define TIMEOUT_TICKS          30
 110 
 111 /* Maximum loop count when receiving packets */
 112 #define MAX_RX_LOOP            40
 113 
 114 /* Some interrupt masks */
 115 #define ETH16I_INTR_ON         0x8f82
 116 #define ETH16I_INTR_OFF        0x0000
 117          
 118 /* Buffers header status byte meanings */
 119 #define PKT_GOOD               BIT(5)
 120 #define PKT_GOOD_RMT           BIT(4)
 121 #define PKT_SHORT              BIT(3)
 122 #define PKT_ALIGN_ERR          BIT(2)
 123 #define PKT_CRC_ERR            BIT(1)
 124 #define PKT_RX_BUF_OVERFLOW    BIT(0)
 125 
 126 /* Transmit status register (DLCR0) */
 127 #define TX_STATUS_REG          0
 128 #define TX_DONE                BIT(7)
 129 #define NET_BUSY               BIT(6)
 130 #define TX_PKT_RCD             BIT(5)
 131 #define CR_LOST                BIT(4)
 132 #define COLLISION              BIT(2)
 133 #define COLLISIONS_16          BIT(1)
 134 
 135 /* Receive status register (DLCR1) */
 136 #define RX_STATUS_REG          1
 137 #define RX_PKT                 BIT(7)  /* Packet received */
 138 #define BUS_RD_ERR             BIT(6)
 139 #define SHORT_PKT_ERR          BIT(3)
 140 #define ALIGN_ERR              BIT(2)
 141 #define CRC_ERR                BIT(1)
 142 #define RX_BUF_OVERFLOW        BIT(0)
 143               
 144 /* Transmit Interrupt Enable Register (DLCR2) */
 145 #define TX_INTR_REG            2
 146 #define TX_INTR_DONE           BIT(7)
 147 #define TX_INTR_COL            BIT(2)
 148 #define TX_INTR_16_COL         BIT(1)
 149 
 150 /* Receive Interrupt Enable Register (DLCR3) */
 151 #define RX_INTR_REG            3
 152 #define RX_INTR_RECEIVE        BIT(7)
 153 #define RX_INTR_SHORT_PKT      BIT(3)
 154 #define RX_INTR_CRC_ERR        BIT(1)
 155 #define RX_INTR_BUF_OVERFLOW   BIT(0)
 156 
 157 /* Transmit Mode Register (DLCR4) */
 158 #define TRANSMIT_MODE_REG      4
 159 #define LOOPBACK_CONTROL       BIT(1)
 160 #define CONTROL_OUTPUT         BIT(2)
 161 
 162 /* Receive Mode Register (DLCR5) */
 163 #define RECEIVE_MODE_REG       5
 164 #define RX_BUFFER_EMPTY        BIT(6)
 165 #define ACCEPT_BAD_PACKETS     BIT(5)
 166 #define RECEIVE_SHORT_ADDR     BIT(4)
 167 #define ACCEPT_SHORT_PACKETS   BIT(3)
 168 #define REMOTE_RESET           BIT(2)
 169 
 170 #define ADDRESS_FILTER_MODE    BIT(1) | BIT(0)
 171 #define REJECT_ALL             0
 172 #define ACCEPT_ALL             3
 173 #define MODE_1                 1            /* NODE ID, BC, MC, 2-24th bit */
 174 #define MODE_2                 2            /* NODE ID, BC, MC, Hash Table */
 175 
 176 /* Configuration Register 0 (DLCR6) */
 177 #define CONFIG_REG_0           6
 178 #define DLC_EN                 BIT(7)
 179 #define SRAM_CYCLE_TIME_100NS  BIT(6)
 180 #define SYSTEM_BUS_WIDTH_8     BIT(5)       /* 1 = 8bit, 0 = 16bit */
 181 #define BUFFER_WIDTH_8         BIT(4)       /* 1 = 8bit, 0 = 16bit */
 182 #define TBS1                   BIT(3)       
 183 #define TBS0                   BIT(2)
 184 #define BS1                    BIT(1)       /* 00=8kb,  01=16kb  */
 185 #define BS0                    BIT(0)       /* 10=32kb, 11=64kb  */
 186 
 187 #ifndef ETH16I_TX_BUF_SIZE                   /* 0 = 2kb, 1 = 4kb  */ 
 188 #define ETH16I_TX_BUF_SIZE     2             /* 2 = 8kb, 3 = 16kb */
 189 #endif                                      
 190 #define TX_BUF_1x2048            0
 191 #define TX_BUF_2x2048            1
 192 #define TX_BUF_2x4098            2
 193 #define TX_BUF_2x8192            3
 194 
 195 /* Configuration Register 1 (DLCR7) */
 196 #define CONFIG_REG_1           7
 197 #define POWERUP                BIT(5)
 198 
 199 /* Transmit start register */
 200 #define TRANSMIT_START_REG     10
 201 #define TRANSMIT_START_RB      2
 202 #define TX_START               BIT(7)       /* Rest of register bit indicate*/
 203                                             /* number of packets in tx buffer*/
 204 /* Node ID registers (DLCR8-13) */
 205 #define NODE_ID_0              8
 206 #define NODE_ID_RB             0
 207 
 208 /* Hash Table registers (HT8-15) */
 209 #define HASH_TABLE_0           8
 210 #define HASH_TABLE_RB          1
 211 
 212 /* Buffer memory ports */
 213 #define BUFFER_MEM_PORT_LB    8
 214 #define DATAPORT              BUFFER_MEM_PORT_LB
 215 #define BUFFER_MEM_PORT_HB    9
 216 
 217 /* 16 Collision control register (BMPR11) */
 218 #define COL_16_REG             11
 219 #define HALT_ON_16             0x00
 220 #define RETRANS_AND_HALT_ON_16 0x02
 221 
 222 /* DMA Burst and Transceiver Mode Register (BMPR13) */
 223 #define TRANSCEIVER_MODE_REG   13
 224 #define TRANSCEIVER_MODE_RB    2         
 225 #define IO_BASE_UNLOCK         BIT(7)
 226 #define LOWER_SQUELCH_TRESH    BIT(6)
 227 #define LINK_TEST_DISABLE      BIT(5)
 228 #define AUI_SELECT             BIT(4)
 229 #define DIS_AUTO_PORT_SEL      BIT(3)
 230 
 231 /* Filter Self Receive Register (BMPR14)  */
 232 #define FILTER_SELF_RX_REG     14
 233 #define SKIP_RECEIVE_PACKET    BIT(2)
 234 #define FILTER_SELF_RECEIVE    BIT(0)
 235 #define RX_BUF_SKIP_PACKET     SKIP_RECEIVE_PACKET | FILTER_SELF_RECEIVE
 236 
 237 /* EEPROM Control Register (BMPR 16) */
 238 #define EEPROM_CTRL_REG        16
 239 
 240 /* EEPROM Data Register (BMPR 17) */
 241 #define EEPROM_DATA_REG        17
 242 
 243 /* NMC93CSx6 EEPROM Control Bits */
 244 #define CS_0                   0x00
 245 #define CS_1                   0x20
 246 #define SK_0                   0x00
 247 #define SK_1                   0x40
 248 #define DI_0                   0x00
 249 #define DI_1                   0x80
 250 
 251 /* NMC93CSx6 EEPROM Instructions */
 252 #define EEPROM_READ            0x80
 253 
 254 /* NMC93CSx6 EEPROM Addresses */
 255 #define E_NODEID_0                     0x02
 256 #define E_NODEID_1                     0x03
 257 #define E_NODEID_2                     0x04
 258 #define E_PORT_SELECT                  0x14
 259   #define E_PORT_BNC                   0
 260   #define E_PORT_DIX                   1
 261   #define E_PORT_TP                    2
 262   #define E_PORT_AUTO                  3
 263 #define E_PRODUCT_CFG                  0x30
 264  
 265 
 266 /* Macro to slow down io between EEPROM clock transitions */
 267 #define eeprom_slow_io() do { int _i = 40; while(--_i > 0) { __SLOW_DOWN_IO; }}while(0)
 268 
 269 /* Jumperless Configuration Register (BMPR19) */
 270 #define JUMPERLESS_CONFIG      19
 271 
 272 /* ID ROM registers, writing to them also resets some parts of chip */
 273 #define ID_ROM_0               24
 274 #define ID_ROM_7               31
 275 #define RESET                  ID_ROM_0
 276 
 277 /* This is the I/O address list to be probed when seeking the card */
 278 static unsigned int eth16i_portlist[] =
 279    { 0x260, 0x280, 0x2A0, 0x240, 0x340, 0x320, 0x380, 0x300, 0 };
 280 
 281 static unsigned int eth32i_portlist[] =
 282    { 0x1000, 0x2000, 0x3000, 0x4000, 0x5000, 0x6000, 0x7000, 0x8000,
 283      0x9000, 0xA000, 0xB000, 0xC000, 0xD000, 0xE000, 0xF000, 0 };
 284 
 285 /* This is the Interrupt lookup table for Eth16i card */
 286 static unsigned int eth16i_irqmap[] = { 9, 10, 5, 15 };
 287 
 288 /* This is the Interrupt lookup table for Eth32i card */
 289 static unsigned int eth32i_irqmap[] = { 3, 5, 7, 9, 10, 11, 12, 15 };  
 290 #define EISA_IRQ_REG    0xc89
 291 
 292 static unsigned int eth16i_tx_buf_map[] = { 2048, 2048, 4096, 8192 };
 293 unsigned int boot = 1;
 294 
 295 /* Use 0 for production, 1 for verification, >2 for debug */
 296 #ifndef ETH16I_DEBUG
 297 #define ETH16I_DEBUG 0
 298 #endif
 299 static unsigned int eth16i_debug = ETH16I_DEBUG;
 300 
 301 /* Information for each board */
 302 struct eth16i_local {
 303   struct enet_statistics stats;
 304   unsigned int tx_started:1;
 305   unsigned char tx_queue;         /* Number of packets in transmit buffer */
 306   unsigned short tx_queue_len;         
 307   unsigned int tx_buf_size;
 308   unsigned long open_time;
 309 };
 310 
 311 /* Function prototypes */
 312 
 313 extern int eth16i_probe(struct device *dev);
 314 
 315 static int eth16i_probe1(struct device *dev, short ioaddr);
 316 static int eth16i_check_signature(short ioaddr);
 317 static int eth16i_probe_port(short ioaddr);
 318 static void eth16i_set_port(short ioaddr, int porttype);
 319 static int eth16i_send_probe_packet(short ioaddr, unsigned char *b, int l);
 320 static int eth16i_receive_probe_packet(short ioaddr);
 321 static int eth16i_get_irq(short ioaddr);
 322 static int eth16i_read_eeprom(int ioaddr, int offset);
 323 static int eth16i_read_eeprom_word(int ioaddr);
 324 static void eth16i_eeprom_cmd(int ioaddr, unsigned char command);
 325 static int eth16i_open(struct device *dev);
 326 static int eth16i_close(struct device *dev);
 327 static int eth16i_tx(struct sk_buff *skb, struct device *dev);
 328 static void eth16i_rx(struct device *dev);
 329 static void eth16i_interrupt(int irq, struct pt_regs *regs);
 330 static void eth16i_multicast(struct device *dev, int num_addrs, void *addrs); 
 331 static void eth16i_select_regbank(unsigned char regbank, short ioaddr);
 332 static void eth16i_initialize(struct device *dev);
 333 static struct enet_statistics *eth16i_get_stats(struct device *dev);
 334 
 335 static char *cardname = "ICL EtherTeam 16i/32";
 336 
 337 #ifdef HAVE_DEVLIST 
 338 /* Support for alternate probe manager */
 339 /struct netdev_entry eth16i_drv = 
 340    {"eth16i", eth16i_probe1, ETH16I_IO_EXTENT, eth16i_probe_list}; 
 341 
 342 #else  /* Not HAVE_DEVLIST */
 343 int eth16i_probe(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 344 {
 345   int i;
 346   int ioaddr;
 347   int base_addr = dev ? dev->base_addr : 0;
 348 
 349   if(eth16i_debug > 4) 
 350     printk("Probing started for %s\n", cardname);
 351 
 352   if(base_addr > 0x1ff)           /* Check only single location */
 353     return eth16i_probe1(dev, base_addr);
 354   else if(base_addr != 0)         /* Don't probe at all */
 355     return ENXIO;
 356 
 357   /* Seek card from the ISA io address space */
 358   for(i = 0; (ioaddr = eth16i_portlist[i]) ; i++) {
 359     if(check_region(ioaddr, ETH16I_IO_EXTENT))
 360       continue;
 361     if(eth16i_probe1(dev, ioaddr) == 0)
 362       return 0;
 363   }
 364 
 365   /* Seek card from the EISA io address space */
 366   for(i = 0; (ioaddr = eth32i_portlist[i]) ; i++) {
 367     if(check_region(ioaddr, ETH16I_IO_EXTENT))
 368         continue;
 369     if(eth16i_probe1(dev, ioaddr) == 0)
 370         return 0;
 371    }
 372 
 373   return ENODEV;
 374 }
 375 #endif  /* Not HAVE_DEVLIST */
 376 
 377 static int eth16i_probe1(struct device *dev, short ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 378 {
 379   static unsigned version_printed = 0;
 380   unsigned int irq = 0;
 381   boot = 1;          /* To inform initilization that we are in boot probe */
 382 
 383   /*
 384      The MB86985 chip has on register which holds information in which 
 385      io address the chip lies. First read this register and compare
 386      it to our current io address and if match then this could
 387      be our chip.
 388   */
 389   
 390   if(ioaddr < 0x1000) {
 391     if(eth16i_portlist[(inb(ioaddr + JUMPERLESS_CONFIG) & 0x07)] != ioaddr)
 392       return -ENODEV;
 393   }
 394 
 395   /* Now we will go a bit deeper and try to find the chip's signature */
 396 
 397   if(eth16i_check_signature(ioaddr) != 0) /* Can we find the signature here */
 398     return -ENODEV;
 399   
 400   /* 
 401      Now it seems that we have found a ethernet chip in this particular
 402      ioaddr. The MB86985 chip has this feature, that when you read a 
 403      certain register it will increase it's io base address to next
 404      configurable slot. Now when we have found the chip, first thing is
 405      to make sure that the chip's ioaddr will hold still here.
 406   */
 407   
 408   eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
 409   outb(0x00, ioaddr + TRANSCEIVER_MODE_REG);
 410   
 411   outb(0x00, ioaddr + RESET);             /* Will reset some parts of chip */
 412   BITSET(ioaddr + CONFIG_REG_0, BIT(7));  /* This will disable the data link */
 413   
 414   if(dev == NULL)
 415     dev = init_etherdev(0, sizeof(struct eth16i_local));
 416 
 417   if( (eth16i_debug & version_printed++) == 0)
 418     printk(version);
 419 
 420   dev->base_addr = ioaddr;
 421  
 422   irq = eth16i_get_irq(ioaddr);
 423   dev->irq = irq;
 424 
 425   /* Try to obtain interrupt vector */
 426   if(request_irq(dev->irq, &eth16i_interrupt, 0, "eth16i")) {
 427     printk("%s: %s at %#3x, but is unusable due 
 428            conflict on IRQ %d.\n", dev->name, cardname, ioaddr, irq);
 429     return EAGAIN;
 430   }
 431 
 432   printk("%s: %s at %#3x, IRQ %d, ", 
 433          dev->name, cardname, ioaddr, dev->irq);
 434 
 435   /* Let's grab the region */
 436   request_region(ioaddr, ETH16I_IO_EXTENT, "eth16i");
 437 
 438   /* Now we will have to lock the chip's io address */
 439   eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
 440   outb(0x38, ioaddr + TRANSCEIVER_MODE_REG); 
 441 
 442   eth16i_initialize(dev);   /* Initialize rest of the chip's registers */
 443   
 444   /* Now let's same some energy by shutting down the chip ;) */
 445   BITCLR(ioaddr + CONFIG_REG_1, POWERUP);
 446    
 447   /* Initialize the device structure */
 448   if(dev->priv == NULL)
 449     dev->priv = kmalloc(sizeof(struct eth16i_local), GFP_KERNEL);
 450   memset(dev->priv, 0, sizeof(struct eth16i_local));
 451 
 452   dev->open               = eth16i_open;
 453   dev->stop               = eth16i_close;
 454   dev->hard_start_xmit    = eth16i_tx;
 455   dev->get_stats          = eth16i_get_stats;
 456   dev->set_multicast_list = &eth16i_multicast;
 457 
 458   /* Fill in the fields of the device structure with ethernet values. */
 459   ether_setup(dev);
 460 
 461   boot = 0;
 462 
 463   return 0;
 464 }
 465 
 466 
 467 static void eth16i_initialize(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 468 {
 469   short ioaddr = dev->base_addr;
 470   int i, node_w = 0;
 471   unsigned char node_byte = 0;
 472 
 473   /* Setup station address */
 474   eth16i_select_regbank(NODE_ID_RB, ioaddr);
 475   for(i = 0 ; i < 3 ; i++) {
 476     unsigned short node_val = eth16i_read_eeprom(ioaddr, E_NODEID_0 + i);
 477     ((unsigned short *)dev->dev_addr)[i] = ntohs(node_val);
 478   }
 479 
 480   for(i = 0; i < 6; i++) { 
 481     outb( ((unsigned char *)dev->dev_addr)[i], ioaddr + NODE_ID_0 + i);
 482     if(boot) {
 483       printk("%02x", inb(ioaddr + NODE_ID_0 + i));
 484       if(i != 5)
 485         printk(":");
 486     }
 487   }
 488 
 489   /* Now we will set multicast addresses to accept none */
 490   eth16i_select_regbank(HASH_TABLE_RB, ioaddr);
 491   for(i = 0; i < 8; i++) 
 492     outb(0x00, ioaddr + HASH_TABLE_0 + i);
 493 
 494   /*
 495      Now let's disable the transmitter and receiver, set the buffer ram 
 496      cycle time, bus width and buffer data path width. Also we shall
 497      set transmit buffer size and total buffer size.
 498   */
 499 
 500   eth16i_select_regbank(2, ioaddr);
 501 
 502   node_byte = 0;
 503   node_w = eth16i_read_eeprom(ioaddr, E_PRODUCT_CFG);
 504 
 505   if( (node_w & 0xFF00) == 0x0800)
 506     node_byte |= BUFFER_WIDTH_8;
 507 
 508   node_byte |= BS1;
 509 
 510   if( (node_w & 0x00FF) == 64)
 511     node_byte |= BS0;
 512   
 513   node_byte |= DLC_EN | SRAM_CYCLE_TIME_100NS | (ETH16I_TX_BUF_SIZE << 2);
 514 
 515   outb(node_byte, ioaddr + CONFIG_REG_0);
 516 
 517   /* We shall halt the transmitting, if 16 collisions are detected */
 518   outb(RETRANS_AND_HALT_ON_16, ioaddr + COL_16_REG);
 519 
 520   if(boot) /* Now set port type */
 521   {
 522     char *porttype[] = {"BNC", "DIX", "TP", "AUTO"};
 523     
 524     ushort ptype = eth16i_read_eeprom(ioaddr, E_PORT_SELECT);
 525     dev->if_port = (ptype & 0x00FF);
 526     
 527     printk(" %s interface.\n", porttype[dev->if_port]);
 528 
 529     if(ptype == E_PORT_AUTO)
 530       ptype = eth16i_probe_port(ioaddr);
 531     
 532     eth16i_set_port(ioaddr, ptype);
 533   }
 534 
 535   /* Set Receive Mode to normal operation */
 536   outb(MODE_2, ioaddr + RECEIVE_MODE_REG);
 537 }
 538 
 539 static int eth16i_probe_port(short ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 540 {
 541   int i;
 542   int retcode;
 543   unsigned char dummy_packet[64] = { 0 };
 544 
 545   /* Powerup the chip */
 546   outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
 547 
 548   BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
 549 
 550   eth16i_select_regbank(NODE_ID_RB, ioaddr);
 551 
 552   for(i = 0; i < 6; i++) {
 553     dummy_packet[i] = inb(ioaddr + NODE_ID_0 + i);
 554     dummy_packet[i+6] = inb(ioaddr + NODE_ID_0 + i);
 555   }
 556 
 557   dummy_packet[12] = 0x00;
 558   dummy_packet[13] = 0x04;
 559 
 560   eth16i_select_regbank(2, ioaddr);
 561 
 562   for(i = 0; i < 3; i++) {
 563     BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
 564     BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
 565     eth16i_set_port(ioaddr, i);
 566    
 567     if(eth16i_debug > 1)
 568         printk("Set port number %d\n", i);
 569 
 570     retcode = eth16i_send_probe_packet(ioaddr, dummy_packet, 64);
 571     if(retcode == 0) {
 572       retcode = eth16i_receive_probe_packet(ioaddr);
 573       if(retcode != -1) {
 574         if(eth16i_debug > 1)
 575                 printk("Eth16i interface port found at %d\n", i);
 576         return i;
 577       }
 578     }
 579     else {
 580       if(eth16i_debug > 1)
 581         printk("TRANSMIT_DONE timeout\n");
 582     }
 583   }
 584   
 585   if( eth16i_debug > 1)
 586         printk("Using default port\n");
 587  
 588  return E_PORT_BNC;
 589 }
 590 
 591 static void eth16i_set_port(short ioaddr, int porttype)
     /* [previous][next][first][last][top][bottom][index][help] */
 592 { 
 593     unsigned short temp = 0;
 594 
 595     eth16i_select_regbank(TRANSCEIVER_MODE_RB, ioaddr);
 596     outb(LOOPBACK_CONTROL, ioaddr + TRANSMIT_MODE_REG);
 597 
 598     temp |= DIS_AUTO_PORT_SEL;
 599 
 600     switch(porttype) {
 601 
 602     case E_PORT_BNC :
 603       temp |= AUI_SELECT;
 604       break;
 605 
 606     case E_PORT_TP :
 607       break;
 608       
 609     case E_PORT_DIX :
 610       temp |= AUI_SELECT;
 611       BITSET(ioaddr + TRANSMIT_MODE_REG, CONTROL_OUTPUT);
 612       break;
 613     }  
 614     outb(temp, ioaddr + TRANSCEIVER_MODE_REG);
 615 
 616     if(eth16i_debug > 1) {
 617         printk("TRANSMIT_MODE_REG = %x\n", inb(ioaddr + TRANSMIT_MODE_REG));
 618         printk("TRANSCEIVER_MODE_REG = %x\n", inb(ioaddr+TRANSCEIVER_MODE_REG));
 619     }
 620 }
 621 
 622 static int eth16i_send_probe_packet(short ioaddr, unsigned char *b, int l)
     /* [previous][next][first][last][top][bottom][index][help] */
 623 {
 624   int starttime;
 625 
 626   outb(0xff, ioaddr + TX_STATUS_REG);
 627 
 628   outw(l, ioaddr + DATAPORT);
 629   outsw(ioaddr + DATAPORT, (unsigned short *)b, (l + 1) >> 1);  
 630   
 631   starttime = jiffies;
 632   outb(TX_START | 1, ioaddr + TRANSMIT_START_REG); 
 633 
 634   while( (inb(ioaddr + TX_STATUS_REG) & 0x80) == 0) {
 635     if( (jiffies - starttime) > TIMEOUT_TICKS) {
 636       break;
 637     }
 638   }
 639   
 640   return(0);
 641 }
 642 
 643 static int eth16i_receive_probe_packet(short ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 644 {
 645   int starttime;
 646   
 647   starttime = jiffies;
 648   
 649   while((inb(ioaddr + TX_STATUS_REG) & 0x20) == 0) {
 650     if( (jiffies - starttime) > TIMEOUT_TICKS) {
 651       
 652       if(eth16i_debug > 1)
 653         printk("Timeout occured waiting transmit packet received\n");
 654       starttime = jiffies;
 655       while((inb(ioaddr + RX_STATUS_REG) & 0x80) == 0) {
 656         if( (jiffies - starttime) > TIMEOUT_TICKS) {
 657         if(eth16i_debug > 1)
 658           printk("Timeout occured waiting receive packet\n");
 659         return -1;
 660         }
 661       }
 662       
 663       if(eth16i_debug > 1)
 664         printk("RECEIVE_PACKET\n");
 665       return(0); /* Found receive packet */
 666     }
 667   }
 668 
 669   if(eth16i_debug > 1) {
 670         printk("TRANSMIT_PACKET_RECEIVED %x\n", inb(ioaddr + TX_STATUS_REG));
 671         printk("RX_STATUS_REG = %x\n", inb(ioaddr + RX_STATUS_REG));
 672   }
 673 
 674   return(0); /* Return success */
 675 }
 676 
 677 static int eth16i_get_irq(short ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 678 {
 679   unsigned char cbyte;
 680   
 681   if( ioaddr < 0x1000) {
 682         cbyte = inb(ioaddr + JUMPERLESS_CONFIG);
 683         return( eth16i_irqmap[ ((cbyte & 0xC0) >> 6) ] );
 684   } else {  /* Oh..the card is EISA so method getting IRQ different */
 685         unsigned short index = 0;
 686         cbyte = inb(ioaddr + EISA_IRQ_REG);
 687         while( (cbyte & 0x01) == 0) {
 688                 cbyte = cbyte >> 1;
 689                 index++;
 690         }
 691         return( eth32i_irqmap[ index ] );
 692   }
 693 }
 694 
 695 static int eth16i_check_signature(short ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 696 {
 697   int i;
 698   unsigned char creg[4] = { 0 };
 699   
 700   for(i = 0; i < 4 ; i++) {
 701 
 702     creg[i] = inb(ioaddr + TRANSMIT_MODE_REG + i);
 703   
 704     if(eth16i_debug > 1)
 705         printk("eth16i: read signature byte %x at %x\n", creg[i],
 706                ioaddr + TRANSMIT_MODE_REG + i);
 707   }
 708 
 709   creg[0] &= 0x0F;      /* Mask collision cnr */
 710   creg[2] &= 0x7F;      /* Mask DCLEN bit */
 711 
 712 #ifdef 0
 713 /* 
 714         This was removed because the card was sometimes left to state
 715         from which it couldn't be find anymore. If there is need
 716         to more strict chech still this have to be fixed.
 717 */
 718   if( !( (creg[0] == 0x06) && (creg[1] == 0x41)) ) {
 719     if(creg[1] != 0x42)
 720       return -1;
 721   }
 722 #endif
 723 
 724   if( !( (creg[2] == 0x36) && (creg[3] == 0xE0)) ) {
 725       creg[2] &= 0x42;
 726       creg[3] &= 0x03;
 727 
 728       if( !( (creg[2] == 0x42) && (creg[3] == 0x00)) )
 729         return -1;
 730   }
 731 
 732   if(eth16i_read_eeprom(ioaddr, E_NODEID_0) != 0)
 733     return -1;
 734   if((eth16i_read_eeprom(ioaddr, E_NODEID_1) & 0xFF00) != 0x4B00)
 735     return -1;
 736 
 737   return 0;
 738 }
 739 
 740 static int eth16i_read_eeprom(int ioaddr, int offset)
     /* [previous][next][first][last][top][bottom][index][help] */
 741 {
 742   int data = 0;
 743 
 744   eth16i_eeprom_cmd(ioaddr, EEPROM_READ | offset);
 745   outb(CS_1, ioaddr + EEPROM_CTRL_REG);
 746   data = eth16i_read_eeprom_word(ioaddr);
 747   outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
 748 
 749   return(data);  
 750 }
 751 
 752 static int eth16i_read_eeprom_word(int ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 753 {
 754   int i;
 755   int data = 0;
 756 
 757   for(i = 16; i > 0; i--) {
 758     outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
 759     eeprom_slow_io();
 760     outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
 761     eeprom_slow_io();
 762     data = (data << 1) | ((inb(ioaddr + EEPROM_DATA_REG) & DI_1) ? 1 : 0);
 763     eeprom_slow_io();
 764   }
 765 
 766   return(data);
 767 }
 768 
 769 static void eth16i_eeprom_cmd(int ioaddr, unsigned char command)
     /* [previous][next][first][last][top][bottom][index][help] */
 770 {
 771   int i;
 772   
 773   outb(CS_0 | SK_0, ioaddr + EEPROM_CTRL_REG);
 774   outb(DI_0, ioaddr + EEPROM_DATA_REG);
 775   outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
 776   outb(DI_1, ioaddr + EEPROM_DATA_REG);
 777   outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
 778 
 779   for(i = 7; i >= 0; i--) {
 780     short cmd = ( (command & (1 << i)) ? DI_1 : DI_0 );
 781     outb(cmd, ioaddr + EEPROM_DATA_REG);
 782     outb(CS_1 | SK_0, ioaddr + EEPROM_CTRL_REG);
 783     eeprom_slow_io();
 784     outb(CS_1 | SK_1, ioaddr + EEPROM_CTRL_REG);
 785     eeprom_slow_io();
 786   } 
 787 }
 788 
 789 static int eth16i_open(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 790 {
 791   struct eth16i_local *lp = (struct eth16i_local *)dev->priv;
 792   int ioaddr = dev->base_addr;
 793   
 794   irq2dev_map[dev->irq] = dev;
 795 
 796   /* Powerup the chip */
 797   outb(0xc0 | POWERUP, ioaddr + CONFIG_REG_1);
 798   
 799   /* Initialize the chip */
 800   eth16i_initialize(dev);  
 801   
 802   /* Set the transmit buffer size */
 803   lp->tx_buf_size = eth16i_tx_buf_map[ETH16I_TX_BUF_SIZE & 0x03];
 804   
 805   if(eth16i_debug > 3)
 806     printk("%s: transmit buffer size %d\n", dev->name, lp->tx_buf_size);
 807 
 808   /* Now enable Transmitter and Receiver sections */
 809   BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
 810  
 811   /* Now switch to register bank 2, for run time operation */
 812   eth16i_select_regbank(2, ioaddr);
 813 
 814   lp->open_time = jiffies;
 815   lp->tx_started = 0;
 816   lp->tx_queue = 0;
 817   lp->tx_queue_len = 0;
 818 
 819   /* Turn on interrupts*/
 820   outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);  
 821 
 822   dev->tbusy = 0;
 823   dev->interrupt = 0;
 824   dev->start = 1;
 825 
 826 #ifdef MODULE
 827   MOD_INC_USE_COUNT;
 828 #endif
 829 
 830   return 0;
 831 }
 832 
 833 static int eth16i_close(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 834 {
 835   struct eth16i_local *lp = (struct eth16i_local *)dev->priv;
 836   int ioaddr = dev->base_addr;
 837 
 838   lp->open_time = 0;
 839 
 840   dev->tbusy = 1;
 841   dev->start = 0;
 842 
 843   /* Disable transmit and receive */
 844   BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
 845 
 846   /* Reset the chip */
 847   outb(0xff, ioaddr + RESET);
 848 
 849   /* Save some energy by switching off power */
 850   BITCLR(ioaddr + CONFIG_REG_1, POWERUP);
 851 
 852 #ifdef MODULE
 853   MOD_DEC_USE_COUNT;
 854 #endif
 855 
 856   return 0;
 857 }
 858 
 859 static int eth16i_tx(struct sk_buff *skb, struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 860 {
 861   struct eth16i_local *lp = (struct eth16i_local *)dev->priv;
 862   int ioaddr = dev->base_addr;
 863 
 864   if(dev->tbusy) {
 865     /* 
 866        If we get here, some higher level has decided that we are broken. 
 867        There should really be a "kick me" function call instead. 
 868     */
 869     
 870     int tickssofar = jiffies - dev->trans_start;
 871     if(tickssofar < TIMEOUT_TICKS)  /* Let's not rush with our timeout, */  
 872       return 1;                     /* wait a couple of ticks first     */
 873 
 874     printk("%s: transmit timed out with status %04x, %s ?\n", dev->name,
 875            inw(ioaddr + TX_STATUS_REG), 
 876            (inb(ioaddr + TX_STATUS_REG) & TX_DONE) ? 
 877            "IRQ conflict" : "network cable problem");
 878 
 879     /* Let's dump all registers */
 880     if(eth16i_debug > 0) { 
 881       printk("%s: timeout regs: %02x %02x %02x %02x %02x %02x %02x %02x.\n",
 882              dev->name, inb(ioaddr + 0), inb(ioaddr + 1), inb(ioaddr + 2), 
 883              inb(ioaddr + 3), inb(ioaddr + 4), inb(ioaddr + 5),
 884              inb(ioaddr + 6), inb(ioaddr + 7));
 885 
 886 
 887       printk("lp->tx_queue = %d\n", lp->tx_queue);
 888       printk("lp->tx_queue_len = %d\n", lp->tx_queue_len);
 889       printk("lp->tx_started = %d\n", lp->tx_started);
 890 
 891     }
 892 
 893     lp->stats.tx_errors++;
 894 
 895     /* Now let's try to restart the adaptor */
 896     
 897     BITSET(ioaddr + CONFIG_REG_0, DLC_EN);
 898     outw(0xffff, ioaddr + RESET);
 899     eth16i_initialize(dev);
 900     outw(0xffff, ioaddr + TX_STATUS_REG);
 901     BITCLR(ioaddr + CONFIG_REG_0, DLC_EN);
 902             
 903     lp->tx_started = 0;
 904     lp->tx_queue = 0;
 905     lp->tx_queue_len = 0;
 906     
 907     outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
 908     
 909     dev->tbusy = 0;
 910     dev->trans_start = jiffies;
 911   }
 912 
 913   /* 
 914      If some higher layer thinks we've missed an tx-done interrupt
 915      we are passed NULL. Caution: dev_tint() handles the cli()/sti()
 916      itself 
 917   */
 918   if(skb == NULL) {
 919     dev_tint(dev);
 920     return 0;
 921   }
 922 
 923   /* Block a timer based transmitter from overlapping. This could better be
 924      done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
 925 
 926   /* Turn off TX interrupts */
 927   outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG);
 928 
 929   if(set_bit(0, (void *)&dev->tbusy) != 0)
 930     printk("%s: Transmitter access conflict.\n", dev->name);
 931   else {
 932     short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
 933     unsigned char *buf = skb->data;
 934   
 935     outw(length, ioaddr + DATAPORT);
 936     
 937     if( ioaddr < 0x1000 ) 
 938         outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
 939     else {
 940         unsigned char frag = length % 4;
 941 
 942         outsl(ioaddr + DATAPORT, buf, length >> 2);
 943         
 944         if( frag != 0 ) {
 945           outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC)), 1);
 946           if( frag == 3 ) 
 947             outsw(ioaddr + DATAPORT, (buf + (length & 0xFFFC) + 2), 1);
 948         }
 949     }
 950 
 951     lp->tx_queue++;
 952     lp->tx_queue_len += length + 2;
 953 
 954     if(lp->tx_started == 0) {
 955       /* If the transmitter is idle..always trigger a transmit */
 956       outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
 957       lp->tx_queue = 0;
 958       lp->tx_queue_len = 0;
 959       dev->trans_start = jiffies;
 960       lp->tx_started = 1;
 961       dev->tbusy = 0;
 962     }
 963     else if(lp->tx_queue_len < lp->tx_buf_size - (ETH_FRAME_LEN + 2)) {
 964       /* There is still more room for one more packet in tx buffer */
 965       dev->tbusy = 0;
 966     }
 967         
 968     outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
 969 
 970     /* Turn TX interrupts back on */
 971     /* outb(TX_INTR_DONE | TX_INTR_16_COL, ioaddr + TX_INTR_REG); */
 972   } 
 973   dev_kfree_skb(skb, FREE_WRITE);
 974 
 975   return 0;
 976 }
 977 
 978 static void eth16i_rx(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 979 {
 980   struct eth16i_local *lp = (struct eth16i_local *)dev->priv;
 981   int ioaddr = dev->base_addr;
 982   int boguscount = MAX_RX_LOOP;
 983 
 984   /* Loop until all packets have been read */
 985   while( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) {
 986     
 987     /* Read status byte from receive buffer */ 
 988     ushort status = inw(ioaddr + DATAPORT);
 989 
 990     if(eth16i_debug > 4)
 991       printk("%s: Receiving packet mode %02x status %04x.\n", 
 992              dev->name, inb(ioaddr + RECEIVE_MODE_REG), status);
 993   
 994       if( !(status & PKT_GOOD) ) {
 995         /* Hmm..something went wrong. Let's check what error occured */
 996         lp->stats.rx_errors++;
 997         if( status & PKT_SHORT     ) lp->stats.rx_length_errors++;
 998         if( status & PKT_ALIGN_ERR ) lp->stats.rx_frame_errors++;
 999         if( status & PKT_CRC_ERR   ) lp->stats.rx_crc_errors++;
1000         if( status & PKT_RX_BUF_OVERFLOW) lp->stats.rx_over_errors++;
1001       }
1002       else {   /* Ok so now we should have a good packet */
1003         struct sk_buff *skb;
1004 
1005         /* Get the size of the packet from receive buffer */
1006         ushort pkt_len = inw(ioaddr + DATAPORT);
1007 
1008         if(pkt_len > ETH_FRAME_LEN) {
1009           printk("%s: %s claimed a very large packet, size of %d bytes.\n", 
1010                  dev->name, cardname, pkt_len);
1011           outb(RX_BUF_SKIP_PACKET, ioaddr + FILTER_SELF_RX_REG);
1012           lp->stats.rx_dropped++;
1013           break;
1014         }
1015 
1016         skb = dev_alloc_skb(pkt_len + 3);
1017         if( skb == NULL ) {
1018           printk("%s: Could'n allocate memory for packet (len %d)\n", 
1019                  dev->name, pkt_len);
1020           outb(RX_BUF_SKIP_PACKET, ioaddr + FILTER_SELF_RX_REG);
1021           lp->stats.rx_dropped++;
1022           break;
1023         }
1024         
1025         skb->dev = dev;
1026         skb_reserve(skb,2);
1027         /* 
1028            Now let's get the packet out of buffer.
1029            size is (pkt_len + 1) >> 1, cause we are now reading words
1030            and it have to be even aligned.
1031         */ 
1032 
1033         if( ioaddr < 0x1000) 
1034           insw(ioaddr + DATAPORT, skb_put(skb, pkt_len), (pkt_len + 1) >> 1);
1035         else {  
1036           unsigned char *buf = skb_put(skb, pkt_len);
1037           unsigned char frag = pkt_len % 4;
1038 
1039           insl(ioaddr + DATAPORT, buf, pkt_len >> 2);
1040         
1041           if(frag != 0) {
1042                 unsigned short rest[2];
1043                 rest[0] = inw( ioaddr + DATAPORT );
1044                 if(frag == 3)
1045                         rest[1] = inw( ioaddr + DATAPORT );
1046 
1047                 memcpy(buf + (pkt_len & 0xfffc), (char *)rest, frag);
1048           }
1049         }
1050         
1051         skb->protocol=eth_type_trans(skb, dev);
1052         netif_rx(skb);
1053         lp->stats.rx_packets++;
1054          
1055         if( eth16i_debug > 5 ) {
1056           int i;
1057           printk("%s: Received packet of length %d.\n", dev->name, pkt_len);
1058           for(i = 0; i < 14; i++) 
1059             printk(" %02x", skb->data[i]);
1060           printk(".\n");
1061         }
1062         
1063       } /* else */
1064 
1065     if(--boguscount <= 0)
1066       break;
1067 
1068   } /* while */
1069 
1070 #if 0
1071   {
1072     int i;
1073 
1074     for(i = 0; i < 20; i++) {
1075       if( (inb(ioaddr+RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == RX_BUFFER_EMPTY)
1076         break;
1077       inw(ioaddr + DATAPORT);
1078       outb(RX_BUF_SKIP_PACKET, ioaddr + FILTER_SELF_RX_REG);
1079     }
1080 
1081     if(eth16i_debug > 1)
1082       printk("%s: Flushed receive buffer.\n", dev->name);
1083   }
1084 #endif
1085 
1086   return;
1087 }
1088 
1089 static void eth16i_interrupt(int irq, struct pt_regs *regs)
     /* [previous][next][first][last][top][bottom][index][help] */
1090 {
1091   struct device *dev = (struct device *)(irq2dev_map[irq]);
1092   struct eth16i_local *lp;
1093   int ioaddr = 0,
1094       status;
1095 
1096   if(dev == NULL) {
1097     printk("eth16i_interrupt(): irq %d for unknown device. \n", irq);
1098     return;
1099   }
1100 
1101   /* Turn off all interrupts from adapter */
1102   outw(ETH16I_INTR_OFF, ioaddr + TX_INTR_REG); 
1103 
1104   dev->interrupt = 1;
1105 
1106   ioaddr = dev->base_addr;
1107   lp = (struct eth16i_local *)dev->priv;
1108   status = inw(ioaddr + TX_STATUS_REG);      /* Get the status */
1109   outw(status, ioaddr + TX_STATUS_REG);      /* Clear status bits */
1110   
1111   if(eth16i_debug > 3)
1112     printk("%s: Interrupt with status %04x.\n", dev->name, status);
1113 
1114   if( status & 0x00ff ) {          /* Let's check the transmit status reg */
1115     
1116     if(status & TX_DONE) {         /* The transmit has been done */
1117       lp->stats.tx_packets++;
1118 
1119       if(lp->tx_queue) {           /* Is there still packets ? */
1120           /* There was packet(s) so start transmitting and write also
1121            how many packets there is to be sended */
1122         outb(TX_START | lp->tx_queue, ioaddr + TRANSMIT_START_REG);
1123         lp->tx_queue = 0;
1124         lp->tx_queue_len = 0;
1125         dev->trans_start = jiffies;
1126         dev->tbusy = 0;
1127         mark_bh(NET_BH);
1128       }
1129       else {
1130         lp->tx_started = 0;
1131         dev->tbusy = 0;
1132         mark_bh(NET_BH);
1133       }
1134     }
1135   }
1136     
1137   if( ( status & 0xff00 ) || 
1138      ( (inb(ioaddr + RECEIVE_MODE_REG) & RX_BUFFER_EMPTY) == 0) ) {
1139     eth16i_rx(dev);  /* We have packet in receive buffer */
1140   }
1141 
1142   dev->interrupt = 0;
1143   
1144   /* Turn interrupts back on */
1145   outw(ETH16I_INTR_ON, ioaddr + TX_INTR_REG);
1146 
1147   return;
1148 }
1149 
1150 static void eth16i_multicast(struct device *dev, int num_addrs, void *addrs)
     /* [previous][next][first][last][top][bottom][index][help] */
1151 {
1152   short ioaddr = dev->base_addr;
1153   
1154   if(dev->mc_count || dev->flags&(IFF_ALLMULTI|IFF_PROMISC)) 
1155   {
1156     dev->flags|=IFF_PROMISC;    /* Must do this */
1157     outb(3, ioaddr + RECEIVE_MODE_REG);    
1158   } else {
1159     outb(2, ioaddr + RECEIVE_MODE_REG);
1160   }
1161 }
1162 
1163 static struct enet_statistics *eth16i_get_stats(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1164 {
1165   struct eth16i_local *lp = (struct eth16i_local *)dev->priv;
1166 
1167   return &lp->stats;
1168 }
1169 
1170 static void eth16i_select_regbank(unsigned char banknbr, short ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
1171 {
1172   unsigned char data;
1173 
1174   data = inb(ioaddr + CONFIG_REG_1);
1175   outb( ((data & 0xF3) | ( (banknbr & 0x03) << 2)), ioaddr + CONFIG_REG_1); 
1176 }
1177 
1178 #ifdef MODULE
1179 static char devicename[9] = { 0, };
1180 static struct device dev_eth16i = {
1181         devicename,
1182         0, 0, 0, 0,
1183         0, 0,
1184         0, 0, 0, NULL, eth16i_probe };
1185 
1186 int io = 0x2a0;
1187 int irq = 0;
1188 
1189 int init_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
1190 {
1191         if(io == 0)
1192                 printk("eth16i: You should not use auto-probing with insmod!\n");
1193         
1194         dev_eth16i.base_addr = io;
1195         dev_eth16i.irq = irq;
1196         if( register_netdev( &dev_eth16i ) != 0 ) {
1197                 printk("eth16i: register_netdev() returned non-zero.\n");
1198                 return -EIO;
1199         }
1200 
1201         return 0;
1202 }
1203 
1204 void cleanup_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
1205 {
1206         unregister_netdev( &dev_eth16i );
1207         free_irq( dev_eth16i.irq );
1208         irq2dev_map[ dev_eth16i.irq ] = NULL;
1209         release_region( dev_eth16i.base_addr, ETH16I_IO_EXTENT );
1210 }
1211 
1212 #endif /* MODULE */
1213 
1214 

/* [previous][next][first][last][top][bottom][index][help] */