L

tag	line	file	source code
L	999	arch/ppc/kernel/raw_printf.c	if (act&L) {
L	1008	arch/ppc/kernel/raw_printf.c	if (act&L) {
L	1015	arch/ppc/kernel/raw_printf.c	if (act&L) {
L	166	drivers/scsi/constants.c	{0x40,0x80,0xff,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Diagnostic failure on component (%x)"},
L	179	drivers/scsi/constants.c	{0x00,0x06,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"I/O process terminated"},
L	187	drivers/scsi/constants.c	{0x03,0x00,D\|T\|L\|W\|S\|O,"Peripheral device write fault"},
L	190	drivers/scsi/constants.c	{0x04,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,
L	192	drivers/scsi/constants.c	{0x04,0x01,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,
L	194	drivers/scsi/constants.c	{0x04,0x02,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,
L	196	drivers/scsi/constants.c	{0x04,0x03,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,
L	198	drivers/scsi/constants.c	{0x04,0x04,D\|T\|L\|O,"Logical unit not ready, format in progress"},
L	199	drivers/scsi/constants.c	{0x05,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Logical unit does not respond to selection"},
L	201	drivers/scsi/constants.c	{0x07,0x00,D\|T\|L\|W\|R\|S\|O\|M,"Multiple peripheral devices selected"},
L	202	drivers/scsi/constants.c	{0x08,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Logical unit communication failure"},
L	203	drivers/scsi/constants.c	{0x08,0x01,D\|T\|L\|W\|R\|S\|O\|M\|C,"Logical unit communication time-out"},
L	204	drivers/scsi/constants.c	{0x08,0x02,D\|T\|L\|W\|R\|S\|O\|M\|C,"Logical unit communication parity error"},
L	209	drivers/scsi/constants.c	{0x0A,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Error log overflow"},
L	229	drivers/scsi/constants.c	{0x14,0x00,D\|T\|L\|W\|R\|S\|O,"Recorded entity not found"},
L	234	drivers/scsi/constants.c	{0x15,0x00,D\|T\|L\|W\|R\|S\|O\|M,"Random positioning error"},
L	235	drivers/scsi/constants.c	{0x15,0x01,D\|T\|L\|W\|R\|S\|O\|M,"Mechanical positioning error"},
L	256	drivers/scsi/constants.c	{0x1A,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Parameter list length error"},
L	257	drivers/scsi/constants.c	{0x1B,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Synchronous data transfer error"},
L	263	drivers/scsi/constants.c	{0x20,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid command operation code"},
L	267	drivers/scsi/constants.c	{0x24,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid field in cdb"},
L	268	drivers/scsi/constants.c	{0x25,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Logical unit not supported"},
L	269	drivers/scsi/constants.c	{0x26,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid field in parameter list"},
L	270	drivers/scsi/constants.c	{0x26,0x01,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Parameter not supported"},
L	271	drivers/scsi/constants.c	{0x26,0x02,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Parameter value invalid"},
L	272	drivers/scsi/constants.c	{0x26,0x03,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Threshold parameters not supported"},
L	274	drivers/scsi/constants.c	{0x28,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Not ready to ready transition (medium may have changed)"},
L	276	drivers/scsi/constants.c	{0x29,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Power on, reset, or bus device reset occurred"},
L	277	drivers/scsi/constants.c	{0x2A,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Parameters changed"},
L	278	drivers/scsi/constants.c	{0x2A,0x01,D\|T\|L\|W\|R\|S\|O\|M\|C,"Mode parameters changed"},
L	279	drivers/scsi/constants.c	{0x2A,0x02,D\|T\|L\|W\|R\|S\|O\|M\|C,"Log parameters changed"},
L	280	drivers/scsi/constants.c	{0x2B,0x00,D\|T\|L\|P\|W\|R\|S\|O\|C,"Copy cannot execute since host cannot disconnect"},
L	281	drivers/scsi/constants.c	{0x2C,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Command sequence error"},
L	285	drivers/scsi/constants.c	{0x2F,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Commands cleared by another initiator"},
L	291	drivers/scsi/constants.c	{0x31,0x01,D\|L\|O,"Format command failed"},
L	295	drivers/scsi/constants.c	{0x36,0x00,L,"Ribbon, ink, or toner failure"},
L	296	drivers/scsi/constants.c	{0x37,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Rounded parameter"},
L	297	drivers/scsi/constants.c	{0x39,0x00,D\|T\|L\|W\|R\|S\|O\|M\|C,"Saving parameters not supported"},
L	298	drivers/scsi/constants.c	{0x3A,0x00,D\|T\|L\|W\|R\|S\|O\|M,"Medium not present"},
L	299	drivers/scsi/constants.c	{0x3B,0x00,T\|L,"Sequential positioning error"},
L	302	drivers/scsi/constants.c	{0x3B,0x03,L,"Tape or electronic vertical forms unit not ready"},
L	303	drivers/scsi/constants.c	{0x3B,0x04,L,"Slew failure"},
L	304	drivers/scsi/constants.c	{0x3B,0x05,L,"Paper jam"},
L	305	drivers/scsi/constants.c	{0x3B,0x06,L,"Failed to sense top-of-form"},
L	306	drivers/scsi/constants.c	{0x3B,0x07,L,"Failed to sense bottom-of-form"},
L	314	drivers/scsi/constants.c	{0x3D,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid bits in identify message"},
L	315	drivers/scsi/constants.c	{0x3E,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Logical unit has not self-configured yet"},
L	316	drivers/scsi/constants.c	{0x3F,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Target operating conditions have changed"},
L	317	drivers/scsi/constants.c	{0x3F,0x01,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Microcode has been changed"},
L	318	drivers/scsi/constants.c	{0x3F,0x02,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Changed operating definition"},
L	319	drivers/scsi/constants.c	{0x3F,0x03,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Inquiry data has changed"},
L	320	drivers/scsi/constants.c	{0x43,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Message error"},
L	321	drivers/scsi/constants.c	{0x44,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Internal target failure"},
L	322	drivers/scsi/constants.c	{0x45,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Select or reselect failure"},
L	323	drivers/scsi/constants.c	{0x46,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Unsuccessful soft reset"},
L	324	drivers/scsi/constants.c	{0x47,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Scsi parity error"},
L	325	drivers/scsi/constants.c	{0x48,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Initiator detected error message received"},
L	326	drivers/scsi/constants.c	{0x49,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Invalid message error"},
L	327	drivers/scsi/constants.c	{0x4A,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Command phase error"},
L	328	drivers/scsi/constants.c	{0x4B,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Data phase error"},
L	329	drivers/scsi/constants.c	{0x4C,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Logical unit failed self-configuration"},
L	330	drivers/scsi/constants.c	{0x4E,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M\|C,"Overlapped commands attempted"},
L	336	drivers/scsi/constants.c	{0x53,0x00,D\|T\|L\|W\|R\|S\|O\|M,"Media load or eject failed"},
L	344	drivers/scsi/constants.c	{0x5A,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M,"Operator request or state change input (unspecified)"},
L	348	drivers/scsi/constants.c	{0x5B,0x00,D\|T\|L\|P\|W\|R\|S\|O\|M,"Log exception"},
L	349	drivers/scsi/constants.c	{0x5B,0x01,D\|T\|L\|P\|W\|R\|S\|O\|M,"Threshold condition met"},
L	350	drivers/scsi/constants.c	{0x5B,0x02,D\|T\|L\|P\|W\|R\|S\|O\|M,"Log counter at maximum"},
L	351	drivers/scsi/constants.c	{0x5B,0x03,D\|T\|L\|P\|W\|R\|S\|O\|M,"Log list codes exhausted"},