![[bottom]](../icons/bottom.png){kind=icon}
![[previous]](../icons/n_left.png){kind=icon}
![[next]](../icons/n_right.png){kind=icon}
![[first]](../icons/n_first.png){kind=icon}
![[last]](../icons/n_last.png){kind=icon}
![[top]](../icons/n_top.png){kind=icon}
![[index]](../icons/index.png){kind=icon}
![[help]](../icons/help.png){kind=icon}
*/
1 /*
2 * arch/mips/kernel/r4xx0.S
3 *
4 * Copyright (C) 1994, 1995 Waldorf Electronics
5 * Written by Ralf Baechle and Andreas Busse
6 *
7 * This file contains most of the R4xx0 specific routines. Due to the
8 * similarities this should hopefully also be fine for the R10000. For
9 * now we especially support the R10000 by not invalidating entries out of
10 * the TLB before calling the C handlers.
11 *
12 * This code is evil magic. Read appendix f (coprozessor 0 hazards) of
13 * all R4xx0 manuals and think about that MIPS means "Microprocessor without
14 * Interlocked Pipeline Stages" before you even think about changing this code!
15 */
16 #include <linux/config.h>
17
18 #include <asm/asm.h>
19 #include <asm/bootinfo.h>
20 #include <asm/cachectl.h>
21 #include <asm/mipsconfig.h>
22 #include <asm/mipsregs.h>
23 #include <asm/page.h>
24 #include <asm/pgtable.h>
25 #include <asm/processor.h>
26 #include <asm/mipsregs.h>
27 #include <asm/segment.h>
28 #include <asm/stackframe.h>
29
30 #ifdef __SMP__
31 #error "Fix this for SMP"
32 #else
33 #define current current_set
34 #endif
35
36 MODE_ALIAS = 0x0016 # uncachable
37
38 .text
39 .set mips3
40 .set noreorder
41
42 .align 5
43 NESTED(handle_tlbl, FR_SIZE, sp)
44 .set noat
45 /*
46 * Check whether this is a refill or an invalid exception
47 *
48 * NOTE: Some MIPS manuals say that the R4x00 sets the
49 * BadVAddr only when EXL == 0. This is wrong - BadVAddr
50 * is being set for all Reload, Invalid and Modified
51 * exceptions.
52 */
53 mfc0 k0,CP0_BADVADDR
54 mfc0 k1,CP0_ENTRYHI
55 ori k0,0x1fff
56 xori k0,0x1fff
57 andi k1,0xff
58 or k0,k1
59 mfc0 k1,CP0_ENTRYHI
60 mtc0 k0,CP0_ENTRYHI
61 nop # for R4[04]00 pipeline
62 nop
63 nop
64 tlbp
65 nop # for R4[04]00 pipeline
66 nop
67 mfc0 k0,CP0_INDEX
68 bgez k0,invalid_tlbl # bad addr in c0_badvaddr
69 mtc0 k1,CP0_ENTRYHI # delay slot
70 /*
71 * Damn... The next nop is required on my R4400PC V5.0, but
72 * I don't know why - at least there is no documented
73 * reason as for the others :-(
74 */
75 nop
76
77 #ifdef CONF_DEBUG_TLB
78 /*
79 * OK, this is a double fault. Let's see whether this is
80 * due to an invalid entry in the page_table.
81 */
82 dmfc0 k0,CP0_BADVADDR
83 srl k0,12
84 sll k0,2
85 lui k1,%HI(TLBMAP)
86 addu k0,k1
87 lw k1,(k0)
88 andi k1,(_PAGE_PRESENT|_PAGE_ACCESSED)
89 bnez k1,reload_pgd_entries
90 nop # delay slot
91
92 .set noat
93 SAVE_ALL
94 .set at
95 PRINT("Double fault caused by invalid entries in pgd:\n")
96 dmfc0 a1,CP0_BADVADDR
97 PRINT("Double fault address : %08lx\n")
98 dmfc0 a1,CP0_EPC
99 PRINT("c0_epc : %08lx\n")
100 jal show_regs
101 move a0,sp
102 jal dump_tlb_all
103 nop
104 dmfc0 a0,CP0_BADVADDR
105 jal dump_list_current
106 nop
107 .set noat
108 STI
109 .set at
110 PANIC("Corrupted pagedir")
111 .set noat
112
113 reload_pgd_entries:
114 #endif /* CONF_DEBUG_TLB */
115
116 /*
117 * Load missing pair of entries from the pgd and return.
118 */
119 dmfc0 k1,CP0_CONTEXT
120 dsra k1,1
121 lwu k0,(k1) # Never causes nested exception
122 lwu k1,4(k1)
123 dsrl k0,6 # Convert to EntryLo format
124 dsrl k1,6 # Convert to EntryLo format
125 dmtc0 k0,CP0_ENTRYLO0
126 dmtc0 k1,CP0_ENTRYLO1
127 nop # for R4[04]00 pipeline
128 tlbwr
129 nop # for R4[04]00 pipeline
130 nop
131 nop
132 /*
133 * We don't know whether the original access was read or
134 * write, so return and see what happens...
135 */
136 eret
137
138 /*
139 * Handle invalid exception
140 *
141 * There are two possible causes for an invalid (tlbl)
142 * exception:
143 * 1) pages with present bit set but the valid bit clear
144 * 2) nonexistant pages
145 * Case one needs fast handling, therefore don't save
146 * registers yet.
147 *
148 * k0 contains c0_index.
149 */
150 invalid_tlbl:
151 #ifdef CONFIG_TLB_SHUTDOWN
152 /*
153 * Remove entry so we don't need to care later
154 * For sake of the R4000 V2.2 pipeline the tlbwi insn
155 * has been moved down. Moving it around is juggling with
156 * explosives...
157 */
158 lui k1,0x0008
159 or k0,k1
160 dsll k0,13
161 dmtc0 k0,CP0_ENTRYHI
162 dmtc0 zero,CP0_ENTRYLO0
163 dmtc0 zero,CP0_ENTRYLO1
164 #endif
165 /*
166 * Test present bit in entry
167 */
168 dmfc0 k0,CP0_BADVADDR
169 srl k0,12
170 sll k0,2
171 #ifdef CONFIG_TLB_SHUTDOWN
172 tlbwi # do not move!
173 #endif
174 lui k1,%HI(TLBMAP)
175 addu k0,k1
176 lw k1,(k0)
177 andi k1,(_PAGE_PRESENT|_PAGE_READ)
178 xori k1,(_PAGE_PRESENT|_PAGE_READ)
179 bnez k1,nopage_tlbl
180 /*
181 * Present and read bits are set -> set valid and accessed bits
182 */
183 lw k1,(k0) # delay slot
184 ori k1,(_PAGE_VALID|_PAGE_ACCESSED)
185 sw k1,(k0)
186 eret
187
188 /*
189 * Page doesn't exist. Lots of work which is less important
190 * for speed needs to be done, so hand it all over to the
191 * kernel memory management routines.
192 */
193 nopage_tlbl: SAVE_ALL
194 dmfc0 a2,CP0_BADVADDR
195 STI
196 .set at
197 /*
198 * a0 (struct pt_regs *) regs
199 * a1 (unsigned long) 0 for read access
200 * a2 (unsigned long) faulting virtual address
201 */
202 move a0,sp
203 jal do_page_fault
204 li a1,0 # delay slot
205 j ret_from_sys_call
206 nop # delay slot
207 END(handle_tlbl)
208
209 .text
210 .align 5
211 NESTED(handle_tlbs, FR_SIZE, sp)
212 .set noat
213 /*
214 * It is impossible that is a nested reload exception.
215 * Therefore this must be a invalid exception.
216 * Two possible cases:
217 * 1) Page exists but not dirty.
218 * 2) Page doesn't exist yet. Hand over to the kernel.
219 *
220 * Test whether present bit in entry is set
221 */
222 dmfc0 k0,CP0_BADVADDR
223 srl k0,12
224 sll k0,2
225 lui k1,%HI(TLBMAP)
226 addu k0,k1
227 lw k1,(k0)
228 tlbp # find faulting entry
229 andi k1,(_PAGE_PRESENT|_PAGE_WRITE)
230 xori k1,(_PAGE_PRESENT|_PAGE_WRITE)
231 bnez k1,nopage_tlbs
232 /*
233 * Present and writable bits set: set accessed and dirty bits.
234 */
235 lw k1,(k0) # delay slot
236 ori k1,k1,(_PAGE_ACCESSED|_PAGE_MODIFIED| \
237 _PAGE_VALID|_PAGE_DIRTY)
238 sw k1,(k0)
239 /*
240 * Now reload the entry into the TLB
241 */
242 ori k0,0x0004
243 xori k0,0x0004
244 lw k1,4(k0)
245 lw k0,(k0)
246 srl k1,6
247 srl k0,6
248 dmtc0 k1,CP0_ENTRYLO1
249 dmtc0 k0,CP0_ENTRYLO0
250 nop # for R4[04]00 pipeline
251 tlbwi
252 nop # for R4[04]00 pipeline
253 nop
254 nop
255 eret
256
257 /*
258 * Page doesn't exist. Lots of work which is less important
259 * for speed needs to be done, so hand it all over to the
260 * kernel memory management routines.
261 */
262 nopage_tlbs:
263 nowrite_mod:
264 #ifdef CONFIG_TLB_SHUTDOWN
265 /*
266 * Remove entry so we don't need to care later
267 */
268 mfc0 k0,CP0_INDEX
269 #ifdef CONF_DEBUG_TLB
270 bgez k0,2f
271 nop
272 /*
273 * We got a tlbs exception but found no matching entry in
274 * the tlb. This should never happen. Paranoia makes us
275 * check it, though.
276 */
277 SAVE_ALL
278 jal show_regs
279 move a0,sp
280 .set at
281 mfc0 a1,CP0_BADVADDR
282 PRINT("c0_badvaddr == %08lx\n")
283 mfc0 a1,CP0_INDEX
284 PRINT("c0_index == %08x\n")
285 mfc0 a1,CP0_ENTRYHI
286 PRINT("c0_entryhi == %08x\n")
287 .set noat
288 STI
289 .set at
290 PANIC("Tlbs or tlbm exception with no matching entry in tlb")
291 1: j 1b
292 nop
293 2:
294 #endif /* CONF_DEBUG_TLB */
295 lui k1,0x0008
296 or k0,k1
297 dsll k0,13
298 dmtc0 k0,CP0_ENTRYHI
299 dmtc0 zero,CP0_ENTRYLO0
300 dmtc0 zero,CP0_ENTRYLO1
301 nop # for R4[04]00 pipeline
302 nop # R4000 V2.2 requires 4 NOPs
303 nop
304 nop
305 tlbwi
306 #endif
307 .set noat
308 SAVE_ALL
309 dmfc0 a2,CP0_BADVADDR
310 STI
311 .set at
312 /*
313 * a0 (struct pt_regs *) regs
314 * a1 (unsigned long) 1 for write access
315 * a2 (unsigned long) faulting virtual address
316 */
317 move a0,sp
318 jal do_page_fault
319 li a1,1 # delay slot
320 j ret_from_sys_call
321 nop # delay slot
322 END(handle_tlbs)
323
324 .align 5
325 NESTED(handle_mod, FR_SIZE, sp)
326 .set noat
327 /*
328 * Two possible cases:
329 * 1) Page is writable but not dirty -> set dirty and return
330 * 2) Page is not writable -> call C handler
331 */
332 dmfc0 k0,CP0_BADVADDR
333 srl k0,12
334 sll k0,2
335 lui k1,%HI(TLBMAP)
336 addu k0,k1
337 lw k1,(k0)
338 tlbp # find faulting entry
339 andi k1,_PAGE_WRITE
340 beqz k1,nowrite_mod
341 /*
342 * Present and writable bits set: set accessed and dirty bits.
343 */
344 lw k1,(k0) # delay slot
345 ori k1,(_PAGE_ACCESSED|_PAGE_DIRTY)
346 sw k1,(k0)
347 /*
348 * Now reload the entry into the tlb
349 */
350 ori k0,0x0004
351 xori k0,0x0004
352 lw k1,4(k0)
353 lw k0,(k0)
354 srl k1,6
355 srl k0,6
356 dmtc0 k1,CP0_ENTRYLO1
357 dmtc0 k0,CP0_ENTRYLO0
358 nop # for R4[04]00 pipeline
359 nop
360 nop
361 tlbwi
362 nop # for R4[04]00 pipeline
363 nop
364 nop
365 eret
366 END(handle_mod)
367 .set at
368
369 /*
370 * Until SAVE_ALL/RESTORE_ALL handle registers 64-bit wide we have to
371 * disable interrupts here.
372 */
373 .set noreorder
374 LEAF(tlbflush)
375 mfc0 t3,CP0_STATUS
376 ori t4,t3,1
377 xori t4,1
378 mtc0 t4,CP0_STATUS
379 li t0,PM_4K
380 mtc0 t0,CP0_PAGEMASK
381 la t0,boot_info
382 lw t0,OFFSET_BOOTINFO_TLB_ENTRIES(t0)
383 dmtc0 zero,CP0_ENTRYLO0
384 dmtc0 zero,CP0_ENTRYLO1
385 mfc0 t2,CP0_WIRED
386 1: subu t0,1
387 mtc0 t0,CP0_INDEX
388 lui t1,0x0008
389 or t1,t0,t1
390 dsll t1,13
391 dmtc0 t1,CP0_ENTRYHI
392 bne t2,t0,1b
393 tlbwi # delay slot
394 jr ra
395 mtc0 t3,CP0_STATUS # delay slot
396 END(tlbflush)
397
398 /*
399 * Code necessary to switch tasks on an Linux/MIPS machine.
400 */
401 .align 5
402 LEAF(resume)
403 /*
404 * Current task's task_struct
405 */
406 lui t5,%hi(current)
407 lw t0,%lo(current)(t5)
408
409 /*
410 * Save status register
411 */
412 mfc0 t1,CP0_STATUS
413 addu t0,a1 # Add tss offset
414 sw t1,TOFF_CP0_STATUS(t0)
415
416 /*
417 * Disable interrupts
418 */
419 ori t2,t1,0x1f
420 xori t2,0x1e
421 mtc0 t2,CP0_STATUS
422
423 /*
424 * Save non-scratch registers
425 * All other registers have been saved on the kernel stack
426 */
427 sw s0,TOFF_REG16(t0)
428 sw s1,TOFF_REG17(t0)
429 sw s2,TOFF_REG18(t0)
430 sw s3,TOFF_REG19(t0)
431 sw s4,TOFF_REG20(t0)
432 sw s5,TOFF_REG21(t0)
433 sw s6,TOFF_REG22(t0)
434 sw s7,TOFF_REG23(t0)
435 sw gp,TOFF_REG28(t0)
436 sw sp,TOFF_REG29(t0)
437 sw fp,TOFF_REG30(t0)
438
439 /*
440 * Save floating point state
441 */
442 sll t2,t1,2
443 bgez t2,2f
444 sw ra,TOFF_REG31(t0) # delay slot
445 sll t2,t1,5
446 bgez t2,1f
447 sdc1 $f0,(TOFF_FPU+0)(t0) # delay slot
448 /*
449 * Store the 16 odd double precision registers
450 */
451 sdc1 $f1,(TOFF_FPU+8)(t0)
452 sdc1 $f3,(TOFF_FPU+24)(t0)
453 sdc1 $f5,(TOFF_FPU+40)(t0)
454 sdc1 $f7,(TOFF_FPU+56)(t0)
455 sdc1 $f9,(TOFF_FPU+72)(t0)
456 sdc1 $f11,(TOFF_FPU+88)(t0)
457 sdc1 $f13,(TOFF_FPU+104)(t0)
458 sdc1 $f15,(TOFF_FPU+120)(t0)
459 sdc1 $f17,(TOFF_FPU+136)(t0)
460 sdc1 $f19,(TOFF_FPU+152)(t0)
461 sdc1 $f21,(TOFF_FPU+168)(t0)
462 sdc1 $f23,(TOFF_FPU+184)(t0)
463 sdc1 $f25,(TOFF_FPU+200)(t0)
464 sdc1 $f27,(TOFF_FPU+216)(t0)
465 sdc1 $f29,(TOFF_FPU+232)(t0)
466 sdc1 $f31,(TOFF_FPU+248)(t0)
467
468 /*
469 * Store the 16 even double precision registers
470 */
471 1: cfc1 t1,fcr31
472 sdc1 $f2,(TOFF_FPU+16)(t0)
473 sdc1 $f4,(TOFF_FPU+32)(t0)
474 sdc1 $f6,(TOFF_FPU+48)(t0)
475 sdc1 $f8,(TOFF_FPU+64)(t0)
476 sdc1 $f10,(TOFF_FPU+80)(t0)
477 sdc1 $f12,(TOFF_FPU+96)(t0)
478 sdc1 $f14,(TOFF_FPU+112)(t0)
479 sdc1 $f16,(TOFF_FPU+128)(t0)
480 sdc1 $f18,(TOFF_FPU+144)(t0)
481 sdc1 $f20,(TOFF_FPU+160)(t0)
482 sdc1 $f22,(TOFF_FPU+176)(t0)
483 sdc1 $f24,(TOFF_FPU+192)(t0)
484 sdc1 $f26,(TOFF_FPU+208)(t0)
485 sdc1 $f28,(TOFF_FPU+224)(t0)
486 sdc1 $f30,(TOFF_FPU+240)(t0)
487 sw t1,(TOFF_FPU+256)(t0)
488
489 /*
490 * Switch current task
491 */
492 2: sw a0,%lo(current)(t5)
493 addu a0,a1 # Add tss offset
494
495 /*
496 * Switch address space
497 */
498
499 /*
500 * (Choose new ASID for process)
501 * This isn't really required, but would speed up
502 * context switching.
503 */
504
505 /*
506 * Switch the root pointer
507 */
508 lw t0,TOFF_PG_DIR(a0)
509 li t1,TLB_ROOT
510 mtc0 t1,CP0_ENTRYHI
511 mtc0 zero,CP0_INDEX
512 srl t0,6
513 ori t0,MODE_ALIAS
514 mtc0 t0,CP0_ENTRYLO0
515 mtc0 zero,CP0_ENTRYLO1
516 lw a2,TOFF_CP0_STATUS(a0)
517
518 /*
519 * Flush tlb
520 * (probably not needed, doesn't clobber a0-a3)
521 */
522 jal tlbflush
523 tlbwi # delay slot
524
525 /*
526 * Restore fpu state:
527 * - cp0 status register bits
528 * - fp gp registers
529 * - cp1 status/control register
530 */
531 ori t1,a2,1 # pipeline magic
532 xori t1,1
533 mtc0 t1,CP0_STATUS
534 sll t0,a2,2
535 bgez t0,2f
536 sll t0,a2,5 # delay slot
537 bgez t0,1f
538 ldc1 $f0,(TOFF_FPU+0)(a0) # delay slot
539 /*
540 * Restore the 16 odd double precision registers only
541 * when enabled in the cp0 status register.
542 */
543 ldc1 $f1,(TOFF_FPU+8)(a0)
544 ldc1 $f3,(TOFF_FPU+24)(a0)
545 ldc1 $f5,(TOFF_FPU+40)(a0)
546 ldc1 $f7,(TOFF_FPU+56)(a0)
547 ldc1 $f9,(TOFF_FPU+72)(a0)
548 ldc1 $f11,(TOFF_FPU+88)(a0)
549 ldc1 $f13,(TOFF_FPU+104)(a0)
550 ldc1 $f15,(TOFF_FPU+120)(a0)
551 ldc1 $f17,(TOFF_FPU+136)(a0)
552 ldc1 $f19,(TOFF_FPU+152)(a0)
553 ldc1 $f21,(TOFF_FPU+168)(a0)
554 ldc1 $f23,(TOFF_FPU+184)(a0)
555 ldc1 $f25,(TOFF_FPU+200)(a0)
556 ldc1 $f27,(TOFF_FPU+216)(a0)
557 ldc1 $f29,(TOFF_FPU+232)(a0)
558 ldc1 $f31,(TOFF_FPU+248)(a0)
559
560 /*
561 * Restore the 16 even double precision registers
562 * when cp1 was enabled in the cp0 status register.
563 */
564 1: lw t0,(TOFF_FPU+256)(a0)
565 ldc1 $f2,(TOFF_FPU+16)(a0)
566 ldc1 $f4,(TOFF_FPU+32)(a0)
567 ldc1 $f6,(TOFF_FPU+48)(a0)
568 ldc1 $f8,(TOFF_FPU+64)(a0)
569 ldc1 $f10,(TOFF_FPU+80)(a0)
570 ldc1 $f12,(TOFF_FPU+96)(a0)
571 ldc1 $f14,(TOFF_FPU+112)(a0)
572 ldc1 $f16,(TOFF_FPU+128)(a0)
573 ldc1 $f18,(TOFF_FPU+144)(a0)
574 ldc1 $f20,(TOFF_FPU+160)(a0)
575 ldc1 $f22,(TOFF_FPU+176)(a0)
576 ldc1 $f24,(TOFF_FPU+192)(a0)
577 ldc1 $f26,(TOFF_FPU+208)(a0)
578 ldc1 $f28,(TOFF_FPU+224)(a0)
579 ldc1 $f30,(TOFF_FPU+240)(a0)
580 ctc1 t0,fcr31
581
582 /*
583 * Restore non-scratch registers
584 */
585 2: lw s0,TOFF_REG16(a0)
586 lw s1,TOFF_REG17(a0)
587 lw s2,TOFF_REG18(a0)
588 lw s3,TOFF_REG19(a0)
589 lw s4,TOFF_REG20(a0)
590 lw s5,TOFF_REG21(a0)
591 lw s6,TOFF_REG22(a0)
592 lw s7,TOFF_REG23(a0)
593 lw gp,TOFF_REG28(a0)
594 lw sp,TOFF_REG29(a0)
595 lw fp,TOFF_REG30(a0)
596 lw ra,TOFF_REG31(a0)
597
598 /*
599 * Restore status register
600 */
601 lw t0,TOFF_KSP(a0)
602 sw t0,kernelsp
603
604 jr ra
605 mtc0 a2,CP0_STATUS # delay slot
606 END(resume)
607
608 /*
609 * Load a new root pointer into the tlb
610 */
611 .set noreorder
612 LEAF(load_pgd)
613 /*
614 * Switch the root pointer
615 */
616 mfc0 t0,CP0_STATUS
617 ori t1,t0,1
618 xori t1,1
619 mtc0 t1,CP0_STATUS
620 srl a0,6
621 ori a0,MODE_ALIAS
622 li t1,TLB_ROOT
623 mtc0 t1,CP0_ENTRYHI
624 mtc0 zero,CP0_INDEX
625 mtc0 a0,CP0_ENTRYLO0
626 mtc0 zero,CP0_ENTRYLO1
627 mtc0 t0,CP0_STATUS
628 j tlbflush
629 tlbwi # delay slot
630 END(load_pgd)
631
632 /*
633 * Some bits in the config register
634 */
635 #define CONFIG_DB (1<<4)
636 #define CONFIG_IB (1<<5)
637
638 /*
639 * Flush instruction/data caches
640 *
641 * Parameters: a0 - starting address to flush
642 * a1 - size of area to be flushed
643 * a2 - which caches to be flushed
644 *
645 * FIXME: - ignores parameters in a0/a1
646 * - doesn't know about second level caches
647 */
648 .set noreorder
649 LEAF(sys_cacheflush)
650 andi t1,a2,DCACHE
651 beqz t1,do_icache
652 li t0,KSEG0 # delay slot
653
654 /*
655 * Writeback data cache, even lines
656 */
657 li t1,CACHELINES-1
658 1: cache Index_Writeback_Inv_D,0(t0)
659 cache Index_Writeback_Inv_D,32(t0)
660 cache Index_Writeback_Inv_D,64(t0)
661 cache Index_Writeback_Inv_D,96(t0)
662 cache Index_Writeback_Inv_D,128(t0)
663 cache Index_Writeback_Inv_D,160(t0)
664 cache Index_Writeback_Inv_D,192(t0)
665 cache Index_Writeback_Inv_D,224(t0)
666 cache Index_Writeback_Inv_D,256(t0)
667 cache Index_Writeback_Inv_D,288(t0)
668 cache Index_Writeback_Inv_D,320(t0)
669 cache Index_Writeback_Inv_D,352(t0)
670 cache Index_Writeback_Inv_D,384(t0)
671 cache Index_Writeback_Inv_D,416(t0)
672 cache Index_Writeback_Inv_D,448(t0)
673 cache Index_Writeback_Inv_D,480(t0)
674 addiu t0,512
675 bnez t1,1b
676 subu t1,1
677
678 /*
679 * Writeback data cache, odd lines
680 * Only needed for 16 byte line size
681 */
682 mfc0 t1,CP0_CONFIG
683 andi t1,CONFIG_DB
684 bnez t1,do_icache
685 li t1,CACHELINES-1
686 1: cache Index_Writeback_Inv_D,16(t0)
687 cache Index_Writeback_Inv_D,48(t0)
688 cache Index_Writeback_Inv_D,80(t0)
689 cache Index_Writeback_Inv_D,112(t0)
690 cache Index_Writeback_Inv_D,144(t0)
691 cache Index_Writeback_Inv_D,176(t0)
692 cache Index_Writeback_Inv_D,208(t0)
693 cache Index_Writeback_Inv_D,240(t0)
694 cache Index_Writeback_Inv_D,272(t0)
695 cache Index_Writeback_Inv_D,304(t0)
696 cache Index_Writeback_Inv_D,336(t0)
697 cache Index_Writeback_Inv_D,368(t0)
698 cache Index_Writeback_Inv_D,400(t0)
699 cache Index_Writeback_Inv_D,432(t0)
700 cache Index_Writeback_Inv_D,464(t0)
701 cache Index_Writeback_Inv_D,496(t0)
702 addiu t0,512
703 bnez t1,1b
704 subu t1,1
705
706 do_icache: andi t1,a2,ICACHE
707 beqz t1,done
708
709 /*
710 * Flush instruction cache, even lines
711 */
712 lui t0,0x8000
713 li t1,CACHELINES-1
714 1: cache Index_Invalidate_I,0(t0)
715 cache Index_Invalidate_I,32(t0)
716 cache Index_Invalidate_I,64(t0)
717 cache Index_Invalidate_I,96(t0)
718 cache Index_Invalidate_I,128(t0)
719 cache Index_Invalidate_I,160(t0)
720 cache Index_Invalidate_I,192(t0)
721 cache Index_Invalidate_I,224(t0)
722 cache Index_Invalidate_I,256(t0)
723 cache Index_Invalidate_I,288(t0)
724 cache Index_Invalidate_I,320(t0)
725 cache Index_Invalidate_I,352(t0)
726 cache Index_Invalidate_I,384(t0)
727 cache Index_Invalidate_I,416(t0)
728 cache Index_Invalidate_I,448(t0)
729 cache Index_Invalidate_I,480(t0)
730 addiu t0,512
731 bnez t1,1b
732 subu t1,1
733
734 /*
735 * Flush instruction cache, even lines
736 * Only needed for 16 byte line size
737 */
738 mfc0 t1,CP0_CONFIG
739 andi t1,CONFIG_IB
740 bnez t1,done
741 li t1,CACHELINES-1
742 1: cache Index_Invalidate_I,16(t0)
743 cache Index_Invalidate_I,48(t0)
744 cache Index_Invalidate_I,80(t0)
745 cache Index_Invalidate_I,112(t0)
746 cache Index_Invalidate_I,144(t0)
747 cache Index_Invalidate_I,176(t0)
748 cache Index_Invalidate_I,208(t0)
749 cache Index_Invalidate_I,240(t0)
750 cache Index_Invalidate_I,272(t0)
751 cache Index_Invalidate_I,304(t0)
752 cache Index_Invalidate_I,336(t0)
753 cache Index_Invalidate_I,368(t0)
754 cache Index_Invalidate_I,400(t0)
755 cache Index_Invalidate_I,432(t0)
756 cache Index_Invalidate_I,464(t0)
757 cache Index_Invalidate_I,496(t0)
758 addiu t0,512
759 bnez t1,1b
760 subu t1,1
761
762 done: j ra
763 nop
764 END(sys_cacheflush)
765
766 /*
767 * Update the TLB - or how instruction scheduling makes code unreadable ...
768 *
769 * MIPS doesn't need any external MMU info: the kernel page tables contain
770 * all the necessary information. We use this hook though to load the
771 * TLB as early as possible with uptodate information avoiding unecessary
772 * exceptions.
773 *
774 * Parameters: a0 - struct vm_area_struct *vma (ignored)
775 * a1 - unsigned long address
776 * a2 - pte_t pte
777 */
778 .set noreorder
779 LEAF(update_mmu_cache)
780 /*
781 * Step 1: Wipe out old TLB information. Not shure if
782 * we really need that step; call it paranoia ...
783 * In order to do that we need to disable interrupts.
784 */
785 mfc0 t0,CP0_STATUS # interrupts off
786 ori t1,t0,1
787 xori t1,1
788 mtc0 t1,CP0_STATUS
789 li t3,TLBMAP # then wait 3 cycles
790 ori t1,a1,0xfff # mask off low 12 bits
791 xori t1,0xfff
792 mfc0 t2,CP0_ENTRYHI # copy ASID into address
793 andi t2,0xff
794 or t2,t1
795 mtc0 t2,CP0_ENTRYHI
796 srl t4,a1,12 # wait again three cycles
797 sll t4,t4,PTRLOG
798 dmtc0 zero,CP0_ENTRYLO0
799 tlbp # now query the TLB
800 addu t3,t4 # wait another three cycles
801 ori t3,0xffff
802 xori t3,0xffff
803 mfc0 t1,CP0_INDEX
804 bltz t1,1f # No old entry?
805 dmtc0 zero,CP0_ENTRYLO1
806 or t3,t1 # wait one cycle
807 tlbwi
808 /*
809 * But there still might be a entry for the pgd ...
810 */
811 1: mtc0 t3,CP0_ENTRYHI
812 nop # wait 3 cycles
813 nop
814 nop
815 tlbp # TLB lookup
816 nop
817 nop
818 mfc0 t1,CP0_INDEX # wait 3 cycles
819 bltz t1,1f # No old entry?
820 nop
821 tlbwi # gotcha ...
822 /*
823 * Step 2: Reload the TLB with new information. We can skip
824 * this but this should speed the mess a bit by avoiding
825 * tlbl/tlbs exceptions. (To be done)
826 */
827 1: jr ra
828 mtc0 t0,CP0_STATUS # delay slot
829 END(update_mmu_cache)
![[top]](../icons/top.png){kind=icon}
![[bottom]](../icons/n_bottom.png){kind=icon}
*/