tag | line | file | source code |
fprintf | 31 | arch/alpha/boot/tools/build.c | fprintf(stderr,"%s: %s\n", program, str); |
fprintf | 112 | arch/alpha/boot/tools/build.c | fprintf(stderr, "section %d (%.8s):\t%lx - %lx (at %x)\n", |
fprintf | 145 | arch/alpha/boot/tools/build.c | fprintf(stderr, "section %d (%.8s):\t%lx - %lx (at %x)\n", |
fprintf | 153 | arch/alpha/boot/tools/build.c | fprintf(stderr, "Boot image too large\n"); |
fprintf | 53 | arch/i386/boot/compressed/misc.c | # define Trace(x) fprintf x |
fprintf | 54 | arch/i386/boot/compressed/misc.c | # define Tracev(x) {if (verbose) fprintf x ;} |
fprintf | 55 | arch/i386/boot/compressed/misc.c | # define Tracevv(x) {if (verbose>1) fprintf x ;} |
fprintf | 56 | arch/i386/boot/compressed/misc.c | # define Tracec(c,x) {if (verbose && (c)) fprintf x ;} |
fprintf | 57 | arch/i386/boot/compressed/misc.c | # define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;} |
fprintf | 47 | arch/i386/boot/compressed/piggyback.c | fprintf(stderr, "%s: Input too large\n", argv[0]); |
fprintf | 51 | arch/i386/boot/compressed/piggyback.c | fprintf(stderr, "Compressed size %d.\n", len); |
fprintf | 28 | arch/i386/boot/compressed/xtract.c | fprintf(stderr,"%s\n",str); |
fprintf | 61 | arch/i386/boot/compressed/xtract.c | fprintf(stderr, "System size is %d\n", sz); |
fprintf | 75 | arch/i386/boot/compressed/xtract.c | fprintf(stderr, "Unexpected EOF\n"); |
fprintf | 81 | arch/i386/boot/tools/build.c | fprintf(stderr,"%s\n",str); |
fprintf | 127 | arch/i386/boot/tools/build.c | fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root); |
fprintf | 146 | arch/i386/boot/tools/build.c | fprintf(stderr,"Boot sector %d bytes.\n",i); |
fprintf | 184 | arch/i386/boot/tools/build.c | fprintf(stderr,"Setup is %d bytes.\n",i); |
fprintf | 206 | arch/i386/boot/tools/build.c | fprintf(stderr,"System is %d kB (%d kB code, %d kB data and %d kB bss)\n", |
fprintf | 218 | arch/i386/boot/tools/build.c | fprintf (stderr, "System is %d kB\n", sz/1024); |
fprintf | 233 | arch/i386/boot/tools/build.c | fprintf(stderr, "Unexpected EOF\n"); |
fprintf | 25 | arch/ppc/boot/cortstrip.c | fprintf(stderr,"%s infile outfile\n", argv[0]); |
fprintf | 33 | arch/ppc/boot/cortstrip.c | fprintf(stderr,"Couldn't open %s\n", argv[1]); |
fprintf | 41 | arch/ppc/boot/cortstrip.c | fprintf(stderr,"Couldn't open %s\n", argv[2]); |
fprintf | 20 | arch/ppc/kernel/cortstrip.c | fprintf(stderr,"%s infile outfile skip\n", argv[0]); |
fprintf | 28 | arch/ppc/kernel/cortstrip.c | fprintf(stderr,"Couldn't open %s\n", argv[1]); |
fprintf | 36 | arch/ppc/kernel/cortstrip.c | fprintf(stderr,"Couldn't open %s\n", argv[2]); |
fprintf | 31 | arch/ppc/kernel/mk_defs.c | fprintf(stderr, "Can't create output file: %d\n", errno); |
fprintf | 34 | arch/ppc/kernel/mk_defs.c | fprintf(out, "/*\n"); |
fprintf | 35 | arch/ppc/kernel/mk_defs.c | fprintf(out, " * WARNING! This file is automatically generated - DO NOT EDIT!\n"); |
fprintf | 36 | arch/ppc/kernel/mk_defs.c | fprintf(out, " */\n"); |
fprintf | 156 | arch/ppc/kernel/mk_defs.c | fprintf(out, "#define %s %d\n", name, offset); |
fprintf | 13 | arch/ppc/kernel/mk_ramdisk.c | fprintf(stderr, "usage: %s <in-file> <out-file>\n", argv[0]); |
fprintf | 18 | arch/ppc/kernel/mk_ramdisk.c | fprintf(stderr, "Can't create '%s'\n", argv[2]); |
fprintf | 23 | arch/ppc/kernel/mk_ramdisk.c | fprintf(stderr, "Can't open '%s'\n", argv[1]); |
fprintf | 26 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "#\n"); |
fprintf | 27 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "# Miscellaneous data structures:\n"); |
fprintf | 28 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "# WARNING - this file is automatically generated!\n"); |
fprintf | 29 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "#\n"); |
fprintf | 30 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "\n"); |
fprintf | 31 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "\t.data\n"); |
fprintf | 32 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "\t.globl builtin_ramdisk_image\n"); |
fprintf | 33 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "builtin_ramdisk_image:\n"); |
fprintf | 43 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "\t.long\t"); |
fprintf | 45 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "0x%02X%02X%02X%02X", lp[0], lp[1], lp[2], lp[3]); |
fprintf | 50 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, " # %x \n", pos+i-12); |
fprintf | 54 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, ","); |
fprintf | 59 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "\t.globl builtin_ramdisk_size\n"); |
fprintf | 60 | arch/ppc/kernel/mk_ramdisk.c | fprintf(out, "builtin_ramdisk_size:\t.long\t0x%x\n", pos); |
fprintf | 21 | arch/ppc/kernel/mkboot.c | fprintf(stderr,"%s infile outfile\n", argv[0]); |
fprintf | 29 | arch/ppc/kernel/mkboot.c | fprintf(stderr,"Couldn't open %s\n", argv[1]); |
fprintf | 37 | arch/ppc/kernel/mkboot.c | fprintf(stderr,"Couldn't open %s\n", argv[2]); |
fprintf | 29 | drivers/char/conmakehash.c | fprintf(stderr, "Usage: \n" |
fprintf | 69 | drivers/char/conmakehash.c | fprintf(stderr, "ERROR: Only 255 unicodes/glyph permitted!\n"); |
fprintf | 123 | drivers/char/conmakehash.c | fprintf(stderr, "%s: Warning: line too long\n", tblname); |
fprintf | 146 | drivers/char/conmakehash.c | fprintf(stderr, "Bad input line: %s\n", buffer); |
fprintf | 159 | drivers/char/conmakehash.c | fprintf(stderr, "Bad input line: %s\n", buffer); |
fprintf | 169 | drivers/char/conmakehash.c | fprintf(stderr, |
fprintf | 176 | drivers/char/conmakehash.c | fprintf(stderr, |
fprintf | 201 | drivers/char/conmakehash.c | fprintf(stderr, |
fprintf | 210 | drivers/char/conmakehash.c | fprintf(stderr, |
fprintf | 217 | drivers/char/conmakehash.c | fprintf(stderr, |
fprintf | 236 | drivers/char/conmakehash.c | fprintf(stderr, "%s: trailing junk (%s) ignored\n", tblname, p); |
fprintf | 77 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, "%s: %s at line %d\n", filename, s, lineno); |
fprintf | 136 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, "\"%s\" ", p->name); |
fprintf | 138 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, "defined as 0x%x\n", p->value); |
fprintf | 140 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, "undefined\n"); |
fprintf | 172 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, |
fprintf | 180 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, |
fprintf | 190 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, " 0x%x", p->patch[i]); |
fprintf | 209 | drivers/scsi/aic7xxx_asm.c | fprintf(fp, "\t0x%02x, 0x%02x, 0x%02x, 0x%02x,\n", |
fprintf | 563 | drivers/scsi/aic7xxx_asm.c | fprintf(ofile, "#define %s \"%s\"\n", a[1], a[2]); |
fprintf | 631 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, "%s: must have one input file\n", *argv); |
fprintf | 729 | drivers/scsi/aic7xxx_asm.c | fprintf(stderr, "%s: Cannot find CPP command.\n", argv[0]); |
fprintf | 251 | drivers/sound/configure.c | fprintf (stderr, "\n\nERROR! Cannot read stdin\n"); |
fprintf | 281 | drivers/sound/configure.c | fprintf (stderr, "\n\nERROR! Cannot read stdin\n"); |
fprintf | 297 | drivers/sound/configure.c | fprintf (stderr, "Illegal format. Try again: "); |
fprintf | 342 | drivers/sound/configure.c | fprintf (stderr, "\n%s\n", question); |
fprintf | 343 | drivers/sound/configure.c | fprintf (stderr, "Possible values are: %s\n", choices); |
fprintf | 348 | drivers/sound/configure.c | fprintf (stderr, "\t(-1 disables this feature)\n"); |
fprintf | 349 | drivers/sound/configure.c | fprintf (stderr, "The default value is %d\n", defa); |
fprintf | 350 | drivers/sound/configure.c | fprintf (stderr, "Enter the value: "); |
fprintf | 354 | drivers/sound/configure.c | fprintf (stderr, "%s set to %d.\n", question, num); |
fprintf | 360 | drivers/sound/configure.c | fprintf (stderr, "\t(0 disables this feature)\n"); |
fprintf | 361 | drivers/sound/configure.c | fprintf (stderr, "The default value is %x\n", defa); |
fprintf | 362 | drivers/sound/configure.c | fprintf (stderr, "Enter the value: "); |
fprintf | 366 | drivers/sound/configure.c | fprintf (stderr, "%s set to %x.\n", question, num); |
fprintf | 398 | drivers/sound/configure.c | fprintf (stderr, "Rebuilding file %s (%s %s)\n", new, method, old); |
fprintf | 404 | drivers/sound/configure.c | fprintf (stderr, "Rebuild failed\n"); |
fprintf | 412 | drivers/sound/configure.c | fprintf (stderr, "Rebuild failed\n"); |
fprintf | 418 | drivers/sound/configure.c | fprintf (stderr, "Failed to build '%s' - unknown method %s\n", |
fprintf | 432 | drivers/sound/configure.c | fprintf (stderr, "Copying old configuration from %s\n", filename); |
fprintf | 436 | drivers/sound/configure.c | fprintf (stderr, "Couldn't open previous configuration file\n"); |
fprintf | 563 | drivers/sound/configure.c | fprintf (stderr, "Old configuration copied.\n"); |
fprintf | 586 | drivers/sound/configure.c | fprintf (optf, "CONFIG_%s=y\n", hw_table[i].macro); |
fprintf | 589 | drivers/sound/configure.c | fprintf (optf, "\n"); |
fprintf | 596 | drivers/sound/configure.c | fprintf (optf, "CONFIG_%s=y\n", extra_options[i].name); |
fprintf | 600 | drivers/sound/configure.c | fprintf (optf, "\n"); |
fprintf | 670 | drivers/sound/configure.c | fprintf (stderr, "\nEnable Joystick port on ProAudioSpectrum (y/N) ? "); |
fprintf | 675 | drivers/sound/configure.c | fprintf (stderr, "PAS16 could be noisy with some mother boards\n" |
fprintf | 859 | drivers/sound/configure.c | fprintf (stderr, "Is your SoundScape card made/marketed by Reveal or Spea? "); |
fprintf | 1115 | drivers/sound/configure.c | fprintf (stderr, "\nConfiguring the sound support\n\n"); |
fprintf | 1119 | drivers/sound/configure.c | fprintf (stderr, "Old configuration exists in %s. Use it (Y/n) ? ", |
fprintf | 1156 | drivers/sound/configure.c | fprintf (stderr, |
fprintf | 1170 | drivers/sound/configure.c | fprintf (stderr, "Do you want support for the mixer of SG NX Pro ? "); |
fprintf | 1177 | drivers/sound/configure.c | fprintf (stderr, "Do you want support for the MV Jazz16 (ProSonic etc.) ? "); |
fprintf | 1180 | drivers/sound/configure.c | fprintf (stderr, "Do you have SoundMan Wave (y/N) ? "); |
fprintf | 1187 | drivers/sound/configure.c | fprintf |
fprintf | 1197 | drivers/sound/configure.c | fprintf (stderr, |
fprintf | 1200 | drivers/sound/configure.c | fprintf (stderr, "including microcode file %s\n", path); |
fprintf | 1204 | drivers/sound/configure.c | fprintf (stderr, "couldn't open %s file\n", |
fprintf | 1206 | drivers/sound/configure.c | fprintf (stderr, "try again with correct path? "); |
fprintf | 1222 | drivers/sound/configure.c | fprintf (stderr, "\n\nThe Logitech SoundMan Games supports 44 kHz in stereo\n" |
fprintf | 1231 | drivers/sound/configure.c | fprintf (stderr, "Do you have a Logitech SoundMan Games (y/N) ? "); |
fprintf | 1245 | drivers/sound/configure.c | fprintf (stderr, "Do you want support for the Audio Excel SoundBlaster pro mode ? "); |
fprintf | 1255 | drivers/sound/configure.c | fprintf (stderr, "Do you want support for the Audio Excel Microsoft Sound System mode? "); |
fprintf | 1266 | drivers/sound/configure.c | fprintf (stderr, "ERROR!!!!!\nYou must select at least one mode when using Audio Excel!\n"); |
fprintf | 1276 | drivers/sound/configure.c | fprintf |
fprintf | 1285 | drivers/sound/configure.c | fprintf (stderr, |
fprintf | 1288 | drivers/sound/configure.c | fprintf (stderr, "including LD file %s\n", path); |
fprintf | 1292 | drivers/sound/configure.c | fprintf (stderr, "couldn't open %s as the ld file\n", |
fprintf | 1294 | drivers/sound/configure.c | fprintf (stderr, "try again with correct path? "); |
fprintf | 1308 | drivers/sound/configure.c | fprintf (sf, "/* automaticaly generated by configure */\n"); |
fprintf | 1309 | drivers/sound/configure.c | fprintf (sf, "unsigned char pss_synth[1];\n" |
fprintf | 1318 | drivers/sound/configure.c | fprintf (stderr, "MediaTriX audioTriX Pro has a onboard microcontroller\n" |
fprintf | 1332 | drivers/sound/configure.c | fprintf (stderr, |
fprintf | 1335 | drivers/sound/configure.c | fprintf (stderr, "including HEX file %s\n", path); |
fprintf | 1347 | drivers/sound/configure.c | fprintf (stderr, "\n*** This combination is useless. Sound driver disabled!!! ***\n\n"); |
fprintf | 1377 | drivers/sound/configure.c | fprintf (stderr, "The sound driver is now configured.\n"); |
fprintf | 1380 | drivers/sound/configure.c | fprintf (stderr, "Remember to update the System file\n"); |
fprintf | 1385 | drivers/sound/configure.c | fprintf (stderr, "Save copy of this configuration to %s (Y/n)", oldconf); |
fprintf | 1412 | drivers/sound/configure.c | fprintf (sf, "/* automaticaly generated by configure */\n"); |
fprintf | 1413 | drivers/sound/configure.c | fprintf (sf, "static unsigned char %s[] = {\n", varname); |
fprintf | 1420 | drivers/sound/configure.c | fprintf (sf, "\n"); |
fprintf | 1421 | drivers/sound/configure.c | fprintf (sf, "0x%02x,", c & 0xFFL); |
fprintf | 1424 | drivers/sound/configure.c | fprintf (sf, "};\n" |
fprintf | 11 | drivers/sound/hex2hex.h | fprintf(stderr, "%s: " why "\n", source); \ |
fprintf | 97 | drivers/sound/hex2hex.h | fprintf(outf, "/*\n *\t Computer generated file. Do not edit.\n */\n"); |
fprintf | 98 | drivers/sound/hex2hex.h | fprintf(outf, "static int %s_len = %d\n", l); |
fprintf | 99 | drivers/sound/hex2hex.h | fprintf(outf, "static unsigned char %s[] = {\n", varline); |
fprintf | 103 | drivers/sound/hex2hex.h | if (i) fprintf(outf, ","); |
fprintf | 104 | drivers/sound/hex2hex.h | if (i && !(i % 16)) fprintf(outf, "\n"); |
fprintf | 105 | drivers/sound/hex2hex.h | fprintf(outf, "0x%02x", buf[i]); |
fprintf | 108 | drivers/sound/hex2hex.h | fprintf(outf, "\n};\n\n"); |
fprintf | 46 | fs/isofs/util.c | fprintf (stderr, "invalid format 7.2.3 number\n"); |
fprintf | 79 | fs/isofs/util.c | fprintf (stderr, "bad format 7.3.3 number\n"); |
fprintf | 993 | lib/inflate.c | fprintf(stderr, "<%u> ", h); |
fprintf | 128 | scripts/lxdialog/checklist.c | fprintf (stderr, |
fprintf | 336 | scripts/lxdialog/checklist.c | fprintf (stderr, "%s\n", items[i * 3]); |
fprintf | 338 | scripts/lxdialog/checklist.c | fprintf (stderr, "\"%s\" ", items[i * 3]); |
fprintf | 341 | scripts/lxdialog/checklist.c | fprintf (stderr, "%s", items[i * 3]); |
fprintf | 147 | scripts/lxdialog/lxdialog.c | fprintf (stderr, "\ |
fprintf | 213 | scripts/lxdialog/lxdialog.c | fprintf(stderr, dialog_input_result); |
fprintf | 307 | scripts/lxdialog/menubox.c | fprintf(stderr, items[(scroll + choice) * 2]); |
fprintf | 316 | scripts/lxdialog/menubox.c | fprintf(stderr, "\"%s\" %s", |
fprintf | 321 | scripts/lxdialog/menubox.c | fprintf(stderr, items[(scroll + choice) * 2]); |
fprintf | 50 | scripts/lxdialog/textbox.c | fprintf (stderr, |
fprintf | 58 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError getting file size in dialog_textbox().\n"); |
fprintf | 64 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer in dialog_textbox().\n"); |
fprintf | 70 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nCan't allocate memory in dialog_textbox().\n"); |
fprintf | 75 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError reading file in dialog_textbox().\n"); |
fprintf | 141 | scripts/lxdialog/textbox.c | fprintf (stderr, |
fprintf | 148 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer in " |
fprintf | 154 | scripts/lxdialog/textbox.c | fprintf (stderr, |
fprintf | 174 | scripts/lxdialog/textbox.c | fprintf (stderr, |
fprintf | 181 | scripts/lxdialog/textbox.c | fprintf (stderr, |
fprintf | 187 | scripts/lxdialog/textbox.c | fprintf (stderr, |
fprintf | 331 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer in " |
fprintf | 346 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer in " |
fprintf | 355 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer " |
fprintf | 363 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError reading file in back_lines().\n"); |
fprintf | 375 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nInternal error in back_lines().\n"); |
fprintf | 385 | scripts/lxdialog/textbox.c | fprintf (stderr, |
fprintf | 395 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer " |
fprintf | 404 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer" |
fprintf | 412 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError reading file in " |
fprintf | 483 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer in " |
fprintf | 492 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError reading file in get_line().\n"); |
fprintf | 529 | scripts/lxdialog/textbox.c | fprintf (stderr, "\nError moving file pointer in print_position().\n"); |
fprintf | 133 | scripts/tkcond.c | fprintf(stderr,"Ooops\n"); |
fprintf | 270 | scripts/tkgen.c | fprintf(stderr,"Fixme\n"); |
fprintf | 388 | scripts/tkgen.c | fprintf(stderr,"Fixme\n"); |
fprintf | 168 | scripts/tkparse.c | fprintf(stderr, |
fprintf | 171 | scripts/tkparse.c | fprintf(stderr, |
fprintf | 395 | scripts/tkparse.c | fprintf(stderr, "unknown command=%s(%s %d)\n", pnt, |
fprintf | 398 | scripts/tkparse.c | fprintf(stderr, "unknown command=%s(%d)\n", pnt,lineno); |
fprintf | 568 | scripts/tkparse.c | fprintf(stderr,"Unable to open file %s\n", filename); |
fprintf | 621 | scripts/tkparse.c | fprintf(stderr,"The config.in file for this platform does not support\n"); |
fprintf | 622 | scripts/tkparse.c | fprintf(stderr,"menus.\n"); |