root/include/linux/mcdx.h

/* [previous][next][first][last][top][bottom][index][help] */

INCLUDED FROM


   1 /*
   2  * Definitions for the Mitsumi CDROM interface
   3  * Copyright (C) 1995 Heiko Schlittermann <heiko@lotte.sax.de>
   4  * VERSION: 1.7
   5  * 
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2, or (at your option)
   9  * any later version.
  10  * 
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  * 
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; see the file COPYING.  If not, write to
  18  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  19  *
  20  * Thanks to
  21  *  The Linux Community at all and ...
  22  *  Martin Harris (he wrote the first Mitsumi Driver)
  23  *  Eberhard Moenkeberg (he gave me much support and the initial kick)
  24  *  Bernd Huebner, Ruediger Helsch (Unifix-Software Gmbh, they
  25  *      improved the original driver)
  26  *  Jon Tombs, Bjorn Ekwall (module support)
  27  *  Daniel v. Mosnenck (he sent me the Technical and Programming Reference)
  28  *  Gerd Knorr (he lent me his PhotoCD)
  29  *  Nils Faerber and Roger E. Wolff (extensivly tested the LU portion)
  30  *  Andreas Kies (testing the mysterious hang up's)
  31  *  ... somebody forgotten?
  32  *  
  33  */
  34 
  35 /*
  36  *      The following lines are for user configuration
  37  *      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  38  *
  39  *      {0|1} -- 1 if you want the driver detect your drive, may crash and
  40  *      needs a long time to seek.  The higher the address the longer the
  41  *      seek.
  42  *
  43  *  WARNING: AUTOPROBE doesn't work.
  44  */
  45 #define MCDX_AUTOPROBE 0
  46 
  47 /*
  48  *      Drive specific settings according to the jumpers on the controller
  49  *      board(s).
  50  *      o       MCDX_NDRIVES  :  number of used entries of the following table
  51  *      o       MCDX_DRIVEMAP :  table of {i/o base, irq} per controller
  52  *
  53  *      NOTE: I didn't get a drive at irq 9(2) working.  Not even alone.
  54  */
  55 #if MCDX_AUTOPROBE == 0
  56         #define MCDX_NDRIVES 1
  57         #define MCDX_DRIVEMAP {         \
  58                         {0x300, 11},    \
  59                         {0x304, 05},    \
  60                         {0x000, 00},    \
  61                         {0x000, 00},    \
  62                         {0x000, 00},    \
  63                 }
  64 #else
  65         #error Autoprobing is not implemented yet.
  66 #endif
  67 
  68 #ifndef MCDX_QUIET
  69 #define MCDX_QUIET   1
  70 #endif
  71 
  72 #ifndef MCDX_DEBUG
  73 #define MCDX_DEBUG   0
  74 #endif
  75 
  76 /* *** make the following line uncommented, if you're sure,
  77  * *** all configuration is done */
  78 /* #define I_WAS_HERE */
  79 
  80 /*      The name of the device */
  81 #define MCDX "mcdx"     
  82 
  83 #if MCDX_QUIET == 1
  84 #define INFO(x)  
  85 #define WARN(x) warn x
  86 #else
  87 #define INFO(x) warn x
  88 #define WARN(x) warn x
  89 #endif
  90 
  91 
  92 #if MCDX_DEBUG == 1
  93 #define TRACE(x) trace x
  94 #define INIT            0
  95 #define MALLOC          0
  96 #define IOCTL           0
  97 #define PLAYTRK     0
  98 #define SUBCHNL     0
  99 #define TOCHDR      0
 100 #define MS          0
 101 #define PLAYMSF     0
 102 #define READTOC     0
 103 #define OPENCLOSE       0
 104 #define HW                  0
 105 #define TALK            0
 106 #define IRQ             0
 107 #define TRANSFER        0
 108 #define REQUEST         0
 109 #define SLEEP           0
 110 #else
 111 #define TRACE(x)
 112 #endif
 113 
 114 /*      The following addresses are taken from the Mitsumi Reference 
 115  *  and describe the possible i/o range for the controller.
 116  */
 117 #define MCDX_IO_BEGIN   ((char*) 0x300) /* first base of i/o addr */
 118 #define MCDX_IO_END             ((char*) 0x3fc) /* last base of i/o addr */
 119 
 120 /*      Per controller 4 bytes i/o are needed. */
 121 #define MCDX_IO_SIZE            4
 122 
 123 /*
 124  *      Bits
 125  */
 126 
 127 /* The status byte, returned from every command, set if
 128  * the description is true */
 129 #define MCDX_RBIT_OPEN       0x80       /* door is open */
 130 #define MCDX_RBIT_DISKSET    0x40       /* disk set (recognised) */
 131 #define MCDX_RBIT_CHANGED    0x20       /* disk was changed */
 132 #define MCDX_RBIT_CHECK      0x10       /* disk rotates, servo is on */
 133 #define MCDX_RBIT_AUDIOTR    0x08   /* current track is audio */
 134 #define MCDX_RBIT_RDERR      0x04       /* read error, refer SENSE KEY */
 135 #define MCDX_RBIT_AUDIOBS    0x02       /* currently playing audio */
 136 #define MCDX_RBIT_CMDERR     0x01       /* command, param or format error */
 137 
 138 /* The I/O Register holding the h/w status of the drive,
 139  * can be read at i/o base + 1 */
 140 #define MCDX_RBIT_DOOR       0x10       /* door is open */
 141 #define MCDX_RBIT_STEN       0x04       /* if 0, i/o base contains drive status */
 142 #define MCDX_RBIT_DTEN       0x02       /* if 0, i/o base contains data */
 143 
 144 /*
 145  *      The commands.
 146  */
 147 
 148 #define OPCODE  1               /* offset of opcode */
 149 #define MCDX_CMD_REQUEST_TOC            1, 0x10
 150 #define MCDX_CMD_REQUEST_STATUS         1, 0x40 
 151 #define MCDX_CMD_RESET                          1, 0x60
 152 #define MCDX_CMD_REQUEST_DRIVE_MODE     1, 0xc2
 153 #define MCDX_CMD_SET_INTERLEAVE         2, 0xc8, 0
 154 #define MCDX_CMD_DATAMODE_SET           2, 0xa0, 0
 155         #define MCDX_DATAMODE1          0x01
 156         #define MCDX_DATAMODE2          0x02
 157 #define MCDX_CMD_LOCK_DOOR              2, 0xfe, 0
 158 
 159 #define READ_AHEAD                      4       /* 8 Sectors (4K) */
 160 
 161 /*      Useful macros */
 162 #define e_door(x)               ((x) & MCDX_RBIT_OPEN)
 163 #define e_check(x)              (~(x) & MCDX_RBIT_CHECK)
 164 #define e_notset(x)             (~(x) & MCDX_RBIT_DISKSET)
 165 #define e_changed(x)    ((x) & MCDX_RBIT_CHANGED)
 166 #define e_audio(x)              ((x) & MCDX_RBIT_AUDIOTR)
 167 #define e_audiobusy(x)  ((x) & MCDX_RBIT_AUDIOBS)
 168 #define e_cmderr(x)             ((x) & MCDX_RBIT_CMDERR)
 169 #define e_readerr(x)    ((x) & MCDX_RBIT_RDERR)
 170 
 171 /**     no drive specific */
 172 #define MCDX_CDBLK      2048    /* 2048 cooked data each blk */
 173 
 174 #define MCDX_DATA_TIMEOUT       (HZ/10) /* 0.1 second */
 175 
 176 /*
 177  * Access to the msf array
 178  */
 179 #define MSF_MIN         0                       /* minute */
 180 #define MSF_SEC         1                       /* second */
 181 #define MSF_FRM         2                       /* frame  */
 182 
 183 /*
 184  * Errors
 185  */
 186 #define MCDX_E          1                       /* unspec error */
 187 #define MCDX_ST_EOM 0x0100              /* end of media */
 188 #define MCDX_ST_DRV 0x00ff              /* mask to query the drive status */
 189 
 190 #ifndef I_WAS_HERE
 191 #warning You have not edited mcdx.h
 192 #warning Perhaps irq and i/o settings are wrong.
 193 #endif
 194 
 195 /* ex:set ts=4 sw=4: */

/* [previous][next][first][last][top][bottom][index][help] */