root/drivers/net/depca.c

/* [previous][next][first][last][top][bottom][index][help] */

DEFINITIONS

This source file includes following definitions.
  1. depca_probe
  2. depca_hw_init
  3. depca_open
  4. depca_init_ring
  5. depca_start_xmit
  6. depca_interrupt
  7. depca_rx
  8. depca_tx
  9. depca_close
  10. LoadCSRs
  11. InitRestartDepca
  12. depca_get_stats
  13. set_multicast_list
  14. SetMulticastFilter
  15. isa_probe
  16. eisa_probe
  17. alloc_device
  18. DepcaSignature
  19. DevicePresent
  20. get_hw_addr
  21. load_packet
  22. EISA_signature
  23. depca_dbg_open
  24. depca_ioctl
  25. init_module
  26. cleanup_module

   1 /*  depca.c: A DIGITAL DEPCA  & EtherWORKS ethernet driver for linux.
   2 
   3     Written 1994, 1995 by David C. Davies.
   4 
   5 
   6                       Copyright 1994 David C. Davies
   7                                    and 
   8                          United States Government
   9          (as represented by the Director, National Security Agency).  
  10 
  11                Copyright 1995  Digital Equipment Corporation.
  12 
  13 
  14     This software may be used and distributed according to the terms of
  15     the GNU Public License, incorporated herein by reference.
  16 
  17     This driver is written for the Digital Equipment Corporation series
  18     of DEPCA and EtherWORKS ethernet cards:
  19 
  20         DEPCA       (the original)
  21         DE100
  22         DE101
  23         DE200 Turbo
  24         DE201 Turbo
  25         DE202 Turbo (TP BNC)
  26         DE210
  27         DE422       (EISA)
  28 
  29     The  driver has been tested on DE100, DE200 and DE202 cards  in  a
  30     relatively busy network. The DE422 has been tested a little.
  31 
  32     This  driver will NOT work   for the DE203,  DE204  and DE205 series  of
  33     cards,  since they have  a  new custom ASIC in   place of the AMD  LANCE
  34     chip.  See the 'ewrk3.c'   driver in the  Linux  source tree for running
  35     those cards.
  36 
  37     I have benchmarked the driver with a  DE100 at 595kB/s to (542kB/s from)
  38     a DECstation 5000/200.
  39 
  40     The   author   may    be   reached  at    davies@wanton.lkg.dec.com   or
  41     davies@maniac.ultranet.com  or Digital  Equipment Corporation, 550  King
  42     Street, Littleton MA 01460.
  43 
  44     =========================================================================
  45 
  46     The  driver was originally based  on   the 'lance.c' driver from  Donald
  47     Becker   which  is included with  the  standard  driver distribution for
  48     linux.  V0.4  is  a complete  re-write  with only  the kernel  interface
  49     remaining from the original code.
  50 
  51     1) Lance.c code in /linux/drivers/net/
  52     2) "Ethernet/IEEE 802.3 Family. 1992 World Network Data Book/Handbook",
  53        AMD, 1992 [(800) 222-9323].
  54     3) "Am79C90 CMOS Local Area Network Controller for Ethernet (C-LANCE)",
  55        AMD, Pub. #17881, May 1993.
  56     4) "Am79C960 PCnet-ISA(tm), Single-Chip Ethernet Controller for ISA",
  57        AMD, Pub. #16907, May 1992
  58     5) "DEC EtherWORKS LC Ethernet Controller Owners Manual",
  59        Digital Equipment corporation, 1990, Pub. #EK-DE100-OM.003
  60     6) "DEC EtherWORKS Turbo Ethernet Controller Owners Manual",
  61        Digital Equipment corporation, 1990, Pub. #EK-DE200-OM.003
  62     7) "DEPCA Hardware Reference Manual", Pub. #EK-DEPCA-PR
  63        Digital Equipment Corporation, 1989
  64     8) "DEC EtherWORKS Turbo_(TP BNC) Ethernet Controller Owners Manual",
  65        Digital Equipment corporation, 1991, Pub. #EK-DE202-OM.001
  66     
  67 
  68     Peter Bauer's depca.c (V0.5) was referred to when debugging V0.1 of this
  69     driver.
  70 
  71     The original DEPCA  card requires that the  ethernet ROM address counter
  72     be enabled to count and has an 8 bit NICSR.  The ROM counter enabling is
  73     only  done when a  0x08 is read as the  first address octet (to minimise
  74     the chances  of writing over some  other hardware's  I/O register).  The
  75     NICSR accesses   have been changed  to  byte accesses  for all the cards
  76     supported by this driver, since there is only one  useful bit in the MSB
  77     (remote boot timeout) and it  is not used.  Also, there  is a maximum of
  78     only 48kB network  RAM for this  card.  My thanks  to Torbjorn Lindh for
  79     help debugging all this (and holding my feet to  the fire until I got it
  80     right).
  81 
  82     The DE200  series  boards have  on-board 64kB  RAM for  use  as a shared
  83     memory network  buffer. Only the DE100  cards make use  of a  2kB buffer
  84     mode which has not  been implemented in  this driver (only the 32kB  and
  85     64kB modes are supported [16kB/48kB for the original DEPCA]).
  86 
  87     At the most only 2 DEPCA cards can  be supported on  the ISA bus because
  88     there is only provision  for two I/O base addresses  on each card (0x300
  89     and 0x200). The I/O address is detected by searching for a byte sequence
  90     in the Ethernet station address PROM at the expected I/O address for the
  91     Ethernet  PROM.   The shared memory  base   address  is 'autoprobed'  by
  92     looking  for the self  test PROM  and detecting the  card name.   When a
  93     second  DEPCA is  detected,  information  is   placed in the   base_addr
  94     variable of the  next device structure (which  is created if necessary),
  95     thus  enabling ethif_probe  initialization  for the device.  More than 2
  96     EISA cards can  be  supported, but  care will  be  needed assigning  the
  97     shared memory to ensure that each slot has the  correct IRQ, I/O address
  98     and shared memory address assigned.
  99 
 100     ************************************************************************
 101 
 102     NOTE: If you are using two  ISA DEPCAs, it is  important that you assign
 103     the base memory addresses correctly.   The  driver autoprobes I/O  0x300
 104     then 0x200.  The  base memory address for  the first device must be less
 105     than that of the second so that the auto probe will correctly assign the
 106     I/O and memory addresses on the same card.  I can't think of a way to do
 107     this unambiguously at the moment, since there is nothing on the cards to
 108     tie I/O and memory information together.
 109 
 110     I am unable  to  test  2 cards   together for now,    so this  code   is
 111     unchecked. All reports, good or bad, are welcome.
 112 
 113     ************************************************************************
 114 
 115     The board IRQ   setting must be  at an  unused IRQ which  is auto-probed
 116     using Donald Becker's autoprobe routines. DEPCA and DE100 board IRQs are
 117     {2,3,4,5,7}, whereas the  DE200 is at {5,9,10,11,15}.  Note that IRQ2 is
 118     really IRQ9 in machines with 16 IRQ lines.
 119 
 120     No 16MB memory  limitation should exist with this  driver as DMA is  not
 121     used and the common memory area is in low memory on the network card (my
 122     current system has 20MB and I've not had problems yet).
 123 
 124     The ability to load this driver as a loadable module has been added. To
 125     utilise this ability, you have to do <8 things:
 126 
 127     0) have a copy of the loadable modules code installed on your system.
 128     1) copy depca.c from the  /linux/drivers/net directory to your favourite
 129     temporary directory.
 130     2) if you wish, edit the  source code near  line 1530 to reflect the I/O
 131     address and IRQ you're using (see also 5).
 132     3) compile  depca.c, but include -DMODULE in  the command line to ensure
 133     that the correct bits are compiled (see end of source code).
 134     4) if you are wanting to add a new  card, goto 5. Otherwise, recompile a
 135     kernel with the depca configuration turned off and reboot.
 136     5) insmod depca.o [irq=7] [io=0x200] [mem=0xd0000] [adapter_name=DE100]
 137        [Alan Cox: Changed the code to allow command line irq/io assignments]
 138        [Dave Davies: Changed the code to allow command line mem/name
 139                                                                 assignments]
 140     6) run the net startup bits for your eth?? interface manually 
 141     (usually /etc/rc.inet[12] at boot time). 
 142     7) enjoy!
 143 
 144     Note that autoprobing is not allowed in loadable modules - the system is
 145     already up and running and you're messing with interrupts.
 146 
 147     To unload a module, turn off the associated interface 
 148     'ifconfig eth?? down' then 'rmmod depca'.
 149 
 150     To assign a base memory address for the shared memory  when running as a
 151     loadable module, see 5 above.  To include the adapter  name (if you have
 152     no PROM  but know the card name)  also see 5  above. Note that this last
 153     option  will not work  with kernel  built-in  depca's. 
 154 
 155     The shared memory assignment for a loadable module  makes sense to avoid
 156     the 'memory autoprobe' picking the wrong shared memory  (for the case of
 157     2 depca's in a PC).
 158 
 159 
 160     TO DO:
 161     ------
 162 
 163 
 164     Revision History
 165     ----------------
 166 
 167     Version   Date        Description
 168   
 169       0.1     25-jan-94   Initial writing.
 170       0.2     27-jan-94   Added LANCE TX hardware buffer chaining.
 171       0.3      1-feb-94   Added multiple DEPCA support.
 172       0.31     4-feb-94   Added DE202 recognition.
 173       0.32    19-feb-94   Tidy up. Improve multi-DEPCA support.
 174       0.33    25-feb-94   Fix DEPCA ethernet ROM counter enable.
 175                           Add jabber packet fix from murf@perftech.com
 176                           and becker@super.org
 177       0.34     7-mar-94   Fix DEPCA max network memory RAM & NICSR access.
 178       0.35     8-mar-94   Added DE201 recognition. Tidied up.
 179       0.351   30-apr-94   Added EISA support. Added DE422 recognition.
 180       0.36    16-may-94   DE422 fix released.
 181       0.37    22-jul-94   Added MODULE support
 182       0.38    15-aug-94   Added DBR ROM switch in depca_close(). 
 183                           Multi DEPCA bug fix.
 184       0.38axp 15-sep-94   Special version for Alpha AXP Linux V1.0.
 185       0.381   12-dec-94   Added DE101 recognition, fix multicast bug.
 186       0.382    9-feb-95   Fix recognition bug reported by <bkm@star.rl.ac.uk>.
 187       0.383   22-feb-95   Fix for conflict with VESA SCSI reported by
 188                           <stromain@alf.dec.com>
 189       0.384   17-mar-95   Fix a ring full bug reported by <bkm@star.rl.ac.uk>
 190       0.385    3-apr-95   Fix a recognition bug reported by 
 191                                                 <ryan.niemi@lastfrontier.com>
 192       0.386   21-apr-95   Fix the last fix...sorry, must be galloping senility
 193       0.40    25-May-95   Rewrite for portability & updated.
 194                           ALPHA support from <jestabro@amt.tay1.dec.com>
 195       0.41    26-Jun-95   Added verify_area() calls in depca_ioctl() from
 196                           suggestion by <heiko@colossus.escape.de>
 197       0.42    27-Dec-95   Add 'mem' shared memory assigment for loadable 
 198                           modules.
 199                           Add 'adapter_name' for loadable modules when no PROM.
 200                           Both above from a suggestion by 
 201                           <pchen@woodruffs121.residence.gatech.edu>.
 202                           Add new multicasting code.
 203 
 204     =========================================================================
 205 */
 206 
 207 static const char *version = "depca.c:v0.42 95/12/27 davies@wanton.lkg.dec.com\n";
 208 
 209 #include <linux/module.h>
 210 
 211 #include <linux/kernel.h>
 212 #include <linux/sched.h>
 213 #include <linux/string.h>
 214 #include <linux/ptrace.h>
 215 #include <linux/errno.h>
 216 #include <linux/ioport.h>
 217 #include <linux/malloc.h>
 218 #include <linux/interrupt.h>
 219 #include <linux/delay.h>
 220 #include <asm/segment.h>
 221 #include <asm/bitops.h>
 222 #include <asm/io.h>
 223 #include <asm/dma.h>
 224 
 225 #include <linux/netdevice.h>
 226 #include <linux/etherdevice.h>
 227 #include <linux/skbuff.h>
 228 
 229 #include <linux/time.h>
 230 #include <linux/types.h>
 231 #include <linux/unistd.h>
 232 
 233 #include "depca.h"
 234 
 235 #ifdef DEPCA_DEBUG
 236 static int depca_debug = DEPCA_DEBUG;
 237 #else
 238 static int depca_debug = 1;
 239 #endif
 240 
 241 #define DEPCA_NDA 0xffe0            /* No Device Address */
 242 
 243 /*
 244 ** Ethernet PROM defines
 245 */
 246 #define PROBE_LENGTH    32
 247 #define ETH_PROM_SIG    0xAA5500FFUL
 248 
 249 /*
 250 ** Set the number of Tx and Rx buffers. Ensure that the memory requested
 251 ** here is <= to the amount of shared memory set up by the board switches.
 252 ** The number of descriptors MUST BE A POWER OF 2.
 253 **
 254 ** total_memory = NUM_RX_DESC*(8+RX_BUFF_SZ) + NUM_TX_DESC*(8+TX_BUFF_SZ)
 255 */
 256 #define NUM_RX_DESC     8               /* Number of RX descriptors */
 257 #define NUM_TX_DESC     8               /* Number of TX descriptors */
 258 #define RX_BUFF_SZ      1536            /* Buffer size for each Rx buffer */
 259 #define TX_BUFF_SZ      1536            /* Buffer size for each Tx buffer */
 260 
 261 #define CRC_POLYNOMIAL_BE 0x04c11db7UL  /* Ethernet CRC, big endian */
 262 #define CRC_POLYNOMIAL_LE 0xedb88320UL  /* Ethernet CRC, little endian */
 263 
 264 /*
 265 ** EISA bus defines
 266 */
 267 #define DEPCA_EISA_IO_PORTS 0x0c00       /* I/O port base address, slot 0 */
 268 #define MAX_EISA_SLOTS 16
 269 #define EISA_SLOT_INC 0x1000
 270 
 271 /*
 272 ** ISA Bus defines
 273 */
 274 #define DEPCA_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0xe0000,0x00000}
 275 #define DEPCA_IO_PORTS {0x300, 0x200, 0}
 276 #define DEPCA_TOTAL_SIZE 0x10
 277 static short mem_chkd = 0;
 278 
 279 /*
 280 ** Name <-> Adapter mapping
 281 */
 282 #define DEPCA_SIGNATURE {"DEPCA",\
 283                          "DE100","DE101",\
 284                          "DE200","DE201","DE202",\
 285                          "DE210",\
 286                          "DE422",\
 287                          ""}
 288 static enum {DEPCA, de100, de101, de200, de201, de202, de210, de422, unknown} adapter;
 289 
 290 /*
 291 ** Miscellaneous info...
 292 */
 293 #define DEPCA_STRLEN 16
 294 #define MAX_NUM_DEPCAS 2
 295 
 296 /*
 297 ** Memory Alignment. Each descriptor is 4 longwords long. To force a
 298 ** particular alignment on the TX descriptor, adjust DESC_SKIP_LEN and
 299 ** DESC_ALIGN. ALIGN aligns the start address of the private memory area
 300 ** and hence the RX descriptor ring's first entry. 
 301 */
 302 #define ALIGN4      ((u_long)4 - 1)       /* 1 longword align */
 303 #define ALIGN8      ((u_long)8 - 1)       /* 2 longword (quadword) align */
 304 #define ALIGN         ALIGN8              /* Keep the LANCE happy... */
 305 
 306 /*
 307 ** The DEPCA Rx and Tx ring descriptors. 
 308 */
 309 struct depca_rx_desc {
 310     volatile s32 base;
 311     s16 buf_length;             /* This length is negative 2's complement! */
 312     s16 msg_length;             /* This length is "normal". */
 313 };
 314 
 315 struct depca_tx_desc {
 316     volatile s32 base;
 317     s16 length;                 /* This length is negative 2's complement! */
 318     s16 misc;                   /* Errors and TDR info */
 319 };
 320 
 321 #define LA_MASK 0x0000ffff      /* LANCE address mask for mapping network RAM
 322                                    to LANCE memory address space */
 323 
 324 /*
 325 ** The Lance initialization block, described in databook, in common memory.
 326 */
 327 struct depca_init {
 328     u16 mode;                   /* Mode register */
 329     u8  phys_addr[ETH_ALEN];    /* Physical ethernet address */
 330     u8  mcast_table[8];         /* Multicast Hash Table. */
 331     u32 rx_ring;                /* Rx ring base pointer & ring length */
 332     u32 tx_ring;                /* Tx ring base pointer & ring length */
 333 };
 334 
 335 #define DEPCA_PKT_STAT_SZ 16
 336 #define DEPCA_PKT_BIN_SZ  128                /* Should be >=100 unless you
 337                                                 increase DEPCA_PKT_STAT_SZ */
 338 struct depca_private {
 339     char devname[DEPCA_STRLEN];    /* Device Product String                  */
 340     char adapter_name[DEPCA_STRLEN];/* /proc/ioports string                  */
 341     char adapter;                  /* Adapter type                           */
 342     struct depca_rx_desc *rx_ring; /* Pointer to start of RX descriptor ring */
 343     struct depca_tx_desc *tx_ring; /* Pointer to start of TX descriptor ring */
 344     struct depca_init   init_block;/* Shadow Initialization block            */
 345     char *rx_memcpy[NUM_RX_DESC];  /* CPU virt address of sh'd memory buffs  */
 346     char *tx_memcpy[NUM_TX_DESC];  /* CPU virt address of sh'd memory buffs  */
 347     u_long bus_offset;             /* (E)ISA bus address offset vs LANCE     */
 348     u_long sh_mem;                 /* Physical start addr of shared mem area */
 349     u_long dma_buffs;              /* LANCE Rx and Tx buffers start address. */
 350     int rx_new, tx_new;            /* The next free ring entry               */
 351     int rx_old, tx_old;            /* The ring entries to be free()ed.       */
 352     struct enet_statistics stats;
 353     struct {                       /* Private stats counters                 */
 354         u32 bins[DEPCA_PKT_STAT_SZ];
 355         u32 unicast;
 356         u32 multicast;
 357         u32 broadcast;
 358         u32 excessive_collisions;
 359         u32 tx_underruns;
 360         u32 excessive_underruns;
 361     } pktStats;
 362     int txRingMask;                /* TX ring mask                           */
 363     int rxRingMask;                /* RX ring mask                           */
 364     s32 rx_rlen;                   /* log2(rxRingMask+1) for the descriptors */
 365     s32 tx_rlen;                   /* log2(txRingMask+1) for the descriptors */
 366 };
 367 
 368 /*
 369 ** The transmit ring full condition is described by the tx_old and tx_new
 370 ** pointers by:
 371 **    tx_old            = tx_new    Empty ring
 372 **    tx_old            = tx_new+1  Full ring
 373 **    tx_old+txRingMask = tx_new    Full ring  (wrapped condition)
 374 */
 375 #define TX_BUFFS_AVAIL ((lp->tx_old<=lp->tx_new)?\
 376                          lp->tx_old+lp->txRingMask-lp->tx_new:\
 377                          lp->tx_old               -lp->tx_new-1)
 378 
 379 /*
 380 ** Public Functions
 381 */
 382 static int    depca_open(struct device *dev);
 383 static int    depca_start_xmit(struct sk_buff *skb, struct device *dev);
 384 static void   depca_interrupt(int irq, void *dev_id, struct pt_regs * regs);
 385 static int    depca_close(struct device *dev);
 386 static int    depca_ioctl(struct device *dev, struct ifreq *rq, int cmd);
 387 static struct enet_statistics *depca_get_stats(struct device *dev);
 388 static void   set_multicast_list(struct device *dev);
 389 
 390 /*
 391 ** Private functions
 392 */
 393 static int    depca_hw_init(struct device *dev, u_long ioaddr);
 394 static void   depca_init_ring(struct device *dev);
 395 static int    depca_rx(struct device *dev);
 396 static int    depca_tx(struct device *dev);
 397 
 398 static void   LoadCSRs(struct device *dev);
 399 static int    InitRestartDepca(struct device *dev);
 400 static void   DepcaSignature(char *name, u_long paddr);
 401 static int    DevicePresent(u_long ioaddr);
 402 static int    get_hw_addr(struct device *dev);
 403 static int    EISA_signature(char *name, s32 eisa_id);
 404 static void   SetMulticastFilter(struct device *dev);
 405 static void   isa_probe(struct device *dev, u_long iobase);
 406 static void   eisa_probe(struct device *dev, u_long iobase);
 407 static struct device *alloc_device(struct device *dev, u_long iobase);
 408 static int    load_packet(struct device *dev, struct sk_buff *skb);
 409 static void   depca_dbg_open(struct device *dev);
 410 
 411 #ifdef MODULE
 412 int           init_module(void);
 413 void          cleanup_module(void);
 414 static int    autoprobed = 1, loading_module = 1;
 415 # else
 416 static u_char de1xx_irq[] = {2,3,4,5,7,9,0};
 417 static u_char de2xx_irq[] = {5,9,10,11,15,0};
 418 static u_char de422_irq[] = {5,9,10,11,0};
 419 static u_char *depca_irq;
 420 static int    autoprobed = 0, loading_module = 0;
 421 #endif /* MODULE */
 422 
 423 static char   name[DEPCA_STRLEN];
 424 static int    num_depcas = 0, num_eth = 0;
 425 static int    mem=0;                       /* For loadable module assignment
 426                                               use insmod mem=0x????? .... */
 427 static char   *adapter_name = '\0';        /* If no PROM when loadable module
 428                                               use insmod adapter_name=DE??? ...
 429                                            */
 430 /*
 431 ** Miscellaneous defines...
 432 */
 433 #define STOP_DEPCA \
 434     outw(CSR0, DEPCA_ADDR);\
 435     outw(STOP, DEPCA_DATA)
 436 
 437 
 438 
 439 int depca_probe(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 440 {
 441   int tmp = num_depcas, status = -ENODEV;
 442   u_long iobase = dev->base_addr;
 443 
 444   if ((iobase == 0) && loading_module){
 445     printk("Autoprobing is not supported when loading a module based driver.\n");
 446     status = -EIO;
 447   } else {
 448     isa_probe(dev, iobase);
 449     eisa_probe(dev, iobase);
 450 
 451     if ((tmp == num_depcas) && (iobase != 0) && loading_module) {
 452       printk("%s: depca_probe() cannot find device at 0x%04lx.\n", dev->name, 
 453                                                                        iobase);
 454     }
 455 
 456     /*
 457     ** Walk the device list to check that at least one device
 458     ** initialised OK
 459     */
 460     for (; (dev->priv == NULL) && (dev->next != NULL); dev = dev->next);
 461 
 462     if (dev->priv) status = 0;
 463     if (iobase == 0) autoprobed = 1;
 464   }
 465 
 466   return status;
 467 }
 468 
 469 static int
 470 depca_hw_init(struct device *dev, u_long ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
 471 {
 472   struct depca_private *lp;
 473   int i, j, offset, netRAM, mem_len, status=0;
 474   s16 nicsr;
 475   u_long mem_start=0, mem_base[] = DEPCA_RAM_BASE_ADDRESSES;
 476 
 477   STOP_DEPCA;
 478 
 479   nicsr = inb(DEPCA_NICSR);
 480   nicsr = ((nicsr & ~SHE & ~RBE & ~IEN) | IM);
 481   outb(nicsr, DEPCA_NICSR);
 482 
 483   if (inw(DEPCA_DATA) == STOP) {
 484     if (mem == 0) {
 485       for (; mem_base[mem_chkd]; mem_chkd++) {
 486         mem_start = mem_base[mem_chkd];
 487         DepcaSignature(name, mem_start);
 488         if (*name != '\0') break;
 489       }
 490     } else {
 491       mem_start = mem;
 492       if (adapter_name) {
 493         strcpy(name, adapter_name);
 494       } else{
 495         DepcaSignature(name, mem_start);
 496       }
 497     }
 498 
 499     if ((*name != '\0') && mem_start) {           /* found a DEPCA device */
 500       dev->base_addr = ioaddr;
 501 
 502       if ((ioaddr&0x0fff)==DEPCA_EISA_IO_PORTS) {/* EISA slot address */
 503         printk("%s: %s at 0x%04lx (EISA slot %d)", 
 504                             dev->name, name, ioaddr, (int)((ioaddr>>12)&0x0f));
 505       } else {                             /* ISA port address */
 506         printk("%s: %s at 0x%04lx", dev->name, name, ioaddr);
 507       }
 508 
 509       printk(", h/w address ");
 510       status = get_hw_addr(dev);
 511       for (i=0; i<ETH_ALEN - 1; i++) { /* get the ethernet address */
 512         printk("%2.2x:", dev->dev_addr[i]);
 513       }
 514       printk("%2.2x", dev->dev_addr[i]);
 515 
 516       if (status == 0) {
 517         /* Set up the maximum amount of network RAM(kB) */
 518         netRAM = ((adapter != DEPCA) ? 64 : 48);
 519         if ((nicsr & _128KB) && (adapter == de422)) netRAM = 128;
 520         offset = 0x0000;
 521 
 522         /* Shared Memory Base Address */ 
 523         if (nicsr & BUF) {
 524           offset = 0x8000;              /* 32kbyte RAM offset*/
 525           nicsr &= ~BS;                 /* DEPCA RAM in top 32k */
 526           netRAM -= 32;
 527         }
 528         mem_start += offset;            /* (E)ISA start address */
 529         if ((mem_len = (NUM_RX_DESC*(sizeof(struct depca_rx_desc)+RX_BUFF_SZ) +
 530                         NUM_TX_DESC*(sizeof(struct depca_tx_desc)+TX_BUFF_SZ) +
 531                         sizeof(struct depca_init))) <=
 532             (netRAM<<10)) {
 533           printk(",\n      has %dkB RAM at 0x%.5lx", netRAM, mem_start);
 534 
 535           /* Enable the shadow RAM. */
 536           if (adapter != DEPCA) {
 537             nicsr |= SHE;
 538             outb(nicsr, DEPCA_NICSR);
 539           }
 540  
 541           /* Define the device private memory */
 542           dev->priv = (void *) kmalloc(sizeof(struct depca_private), GFP_KERNEL);
 543           if (dev->priv == NULL)
 544             return -ENOMEM;
 545           lp = (struct depca_private *)dev->priv;
 546           memset((char *)dev->priv, 0, sizeof(struct depca_private));
 547           lp->adapter = adapter;
 548           sprintf(lp->adapter_name,"%s (%s)", name, dev->name);
 549           request_region(ioaddr, DEPCA_TOTAL_SIZE, lp->adapter_name);
 550 
 551           /* Initialisation Block */
 552           lp->sh_mem = mem_start;
 553           mem_start += sizeof(struct depca_init);
 554 
 555           /* Tx & Rx descriptors (aligned to a quadword boundary) */
 556           mem_start = (mem_start + ALIGN) & ~ALIGN;
 557           lp->rx_ring = (struct depca_rx_desc *)mem_start;
 558 
 559           mem_start += (sizeof(struct depca_rx_desc) * NUM_RX_DESC);
 560           lp->tx_ring = (struct depca_tx_desc *)mem_start;
 561 
 562           mem_start += (sizeof(struct depca_tx_desc) * NUM_TX_DESC);
 563           lp->bus_offset = mem_start & 0x00ff0000;
 564           mem_start &= LA_MASK;           /* LANCE re-mapped start address */
 565 
 566           lp->dma_buffs = mem_start;
 567 
 568           /* Finish initialising the ring information. */
 569           lp->rxRingMask = NUM_RX_DESC - 1;
 570           lp->txRingMask = NUM_TX_DESC - 1;
 571 
 572           /* Calculate Tx/Rx RLEN size for the descriptors. */
 573           for (i=0, j = lp->rxRingMask; j>0; i++) {
 574             j >>= 1;
 575           }
 576           lp->rx_rlen = (s32)(i << 29);
 577           for (i=0, j = lp->txRingMask; j>0; i++) {
 578             j >>= 1;
 579           }
 580           lp->tx_rlen = (s32)(i << 29);
 581 
 582           /* Load the initialisation block */
 583           depca_init_ring(dev);
 584 
 585           /* Initialise the control and status registers */
 586           LoadCSRs(dev);
 587 
 588           /* Enable DEPCA board interrupts for autoprobing */
 589           nicsr = ((nicsr & ~IM)|IEN);
 590           outb(nicsr, DEPCA_NICSR);
 591 
 592           /* To auto-IRQ we enable the initialization-done and DMA err,
 593              interrupts. For now we will always get a DMA error. */
 594           if (dev->irq < 2) {
 595 #ifndef MODULE
 596             unsigned char irqnum;
 597             autoirq_setup(0);
 598             
 599             /* Assign the correct irq list */
 600             switch (lp->adapter) {
 601             case DEPCA:
 602             case de100:
 603             case de101:
 604               depca_irq = de1xx_irq;
 605               break;
 606             case de200:
 607             case de201:
 608             case de202:
 609             case de210:
 610               depca_irq = de2xx_irq;
 611               break;
 612             case de422:
 613               depca_irq = de422_irq;
 614               break;
 615             }
 616 
 617             /* Trigger an initialization just for the interrupt. */
 618             outw(INEA | INIT, DEPCA_DATA);
 619           
 620             irqnum = autoirq_report(1);
 621             if (!irqnum) {
 622               printk(" and failed to detect IRQ line.\n");
 623               status = -ENXIO;
 624             } else {
 625               for (dev->irq=0,i=0; (depca_irq[i]) && (!dev->irq); i++) {
 626                 if (irqnum == depca_irq[i]) {
 627                   dev->irq = irqnum;
 628                   printk(" and uses IRQ%d.\n", dev->irq);
 629                 }
 630               }
 631               
 632               if (!dev->irq) {
 633                 printk(" but incorrect IRQ line detected.\n");
 634                 status = -ENXIO;
 635               }
 636             }
 637 #endif /* MODULE */
 638           } else {
 639             printk(" and assigned IRQ%d.\n", dev->irq);
 640           }
 641           if (status) release_region(ioaddr, DEPCA_TOTAL_SIZE);
 642         } else {
 643           printk(",\n      requests %dkB RAM: only %dkB is available!\n", 
 644                                                         (mem_len>>10), netRAM);
 645           status = -ENXIO;
 646         }
 647       } else {
 648         printk("      which has an Ethernet PROM CRC error.\n");
 649         status = -ENXIO;
 650       }
 651     }
 652     if (!status) {
 653       if (depca_debug > 0) {
 654         printk(version);
 655       }
 656 
 657       /* The DEPCA-specific entries in the device structure. */
 658       dev->open = &depca_open;
 659       dev->hard_start_xmit = &depca_start_xmit;
 660       dev->stop = &depca_close;
 661       dev->get_stats = &depca_get_stats;
 662       dev->set_multicast_list = &set_multicast_list;
 663       dev->do_ioctl = &depca_ioctl;
 664 
 665       dev->mem_start = 0;
 666         
 667       /* Fill in the generic field of the device structure. */
 668       ether_setup(dev);
 669     } else {                           /* Incorrectly initialised hardware */
 670       if (dev->priv) {
 671         kfree_s(dev->priv, sizeof(struct depca_private));
 672         dev->priv = NULL;
 673       }
 674     }
 675   } else {
 676     status = -ENXIO;
 677   }
 678 
 679   return status;
 680 }
 681 
 682 
 683 static int
 684 depca_open(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 685 {
 686   struct depca_private *lp = (struct depca_private *)dev->priv;
 687   u_long ioaddr = dev->base_addr;
 688   s16 nicsr;
 689   int status = 0;
 690 
 691   irq2dev_map[dev->irq] = dev;
 692   STOP_DEPCA;
 693   nicsr = inb(DEPCA_NICSR);
 694 
 695   /* Make sure the shadow RAM is enabled */
 696   if (adapter != DEPCA) {
 697     nicsr |= SHE;
 698     outb(nicsr, DEPCA_NICSR);
 699   }
 700 
 701   /* Re-initialize the DEPCA... */
 702   depca_init_ring(dev);
 703   LoadCSRs(dev);
 704 
 705   depca_dbg_open(dev);
 706 
 707   if (request_irq(dev->irq, &depca_interrupt, 0, lp->adapter_name, NULL)) {
 708     printk("depca_open(): Requested IRQ%d is busy\n",dev->irq);
 709     status = -EAGAIN;
 710   } else {
 711 
 712     /* Enable DEPCA board interrupts and turn off LED */
 713     nicsr = ((nicsr & ~IM & ~LED)|IEN);
 714     outb(nicsr, DEPCA_NICSR);
 715     outw(CSR0,DEPCA_ADDR);
 716     
 717     dev->tbusy = 0;                         
 718     dev->interrupt = 0;
 719     dev->start = 1;
 720     
 721     status = InitRestartDepca(dev);
 722 
 723     if (depca_debug > 1){
 724       printk("CSR0: 0x%4.4x\n",inw(DEPCA_DATA));
 725       printk("nicsr: 0x%02x\n",inb(DEPCA_NICSR));
 726     }
 727   }
 728 
 729   MOD_INC_USE_COUNT;
 730   
 731   return status;
 732 }
 733 
 734 /* Initialize the lance Rx and Tx descriptor rings. */
 735 static void
 736 depca_init_ring(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 737 {
 738   struct depca_private *lp = (struct depca_private *)dev->priv;
 739   u_int i;
 740   u_long p;
 741 
 742   /* Lock out other processes whilst setting up the hardware */
 743   set_bit(0, (void *)&dev->tbusy);
 744 
 745   lp->rx_new = lp->tx_new = 0;
 746   lp->rx_old = lp->tx_old = 0;
 747 
 748   /* Initialize the base addresses and length of each buffer in the ring */
 749   for (i = 0; i <= lp->rxRingMask; i++) {
 750     writel((p=lp->dma_buffs+i*RX_BUFF_SZ) | R_OWN, &lp->rx_ring[i].base);
 751     writew(-RX_BUFF_SZ, &lp->rx_ring[i].buf_length);
 752     lp->rx_memcpy[i]=(char *)(p+lp->bus_offset);
 753   }
 754   for (i = 0; i <= lp->txRingMask; i++) {
 755     writel((p=lp->dma_buffs+(i+lp->txRingMask+1)*TX_BUFF_SZ) & 0x00ffffff,
 756                                                          &lp->tx_ring[i].base);
 757     lp->tx_memcpy[i]=(char *)(p+lp->bus_offset);
 758   }
 759 
 760   /* Set up the initialization block */
 761   lp->init_block.rx_ring = ((u32)((u_long)lp->rx_ring)&LA_MASK) | lp->rx_rlen;
 762   lp->init_block.tx_ring = ((u32)((u_long)lp->tx_ring)&LA_MASK) | lp->tx_rlen;
 763 
 764   SetMulticastFilter(dev);
 765 
 766   for (i = 0; i < ETH_ALEN; i++) {
 767     lp->init_block.phys_addr[i] = dev->dev_addr[i];
 768   }
 769 
 770   lp->init_block.mode = 0x0000;            /* Enable the Tx and Rx */
 771 
 772   return;
 773 }
 774 
 775 /* 
 776 ** Writes a socket buffer to TX descriptor ring and starts transmission 
 777 */
 778 static int
 779 depca_start_xmit(struct sk_buff *skb, struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 780 {
 781   struct depca_private *lp = (struct depca_private *)dev->priv;
 782   u_long ioaddr = dev->base_addr;
 783   int status = 0;
 784 
 785   /* Transmitter timeout, serious problems. */
 786   if (dev->tbusy) {
 787     int tickssofar = jiffies - dev->trans_start;
 788     if (tickssofar < 1*HZ) {
 789       status = -1;
 790     } else {
 791       printk("%s: transmit timed out, status %04x, resetting.\n",
 792              dev->name, inw(DEPCA_DATA));
 793         
 794       STOP_DEPCA;
 795       depca_init_ring(dev);
 796       LoadCSRs(dev);
 797       dev->interrupt = UNMASK_INTERRUPTS;
 798       dev->start = 1;
 799       dev->tbusy=0;
 800       dev->trans_start = jiffies;
 801       InitRestartDepca(dev);
 802     }
 803     return status;
 804   } else if (skb == NULL) {
 805     dev_tint(dev);
 806   } else if (skb->len > 0) {
 807     /* Enforce 1 process per h/w access */
 808     if (set_bit(0, (void*)&dev->tbusy) != 0) {
 809       printk("%s: Transmitter access conflict.\n", dev->name);
 810       status = -1;
 811     } else {
 812       if (TX_BUFFS_AVAIL) {                    /* Fill in a Tx ring entry */
 813         status = load_packet(dev, skb);
 814 
 815         if (!status) {
 816           /* Trigger an immediate send demand. */
 817           outw(CSR0, DEPCA_ADDR);
 818           outw(INEA | TDMD, DEPCA_DATA);
 819           
 820           dev->trans_start = jiffies;
 821           dev_kfree_skb(skb, FREE_WRITE);
 822         }
 823         if (TX_BUFFS_AVAIL) {
 824           dev->tbusy=0;
 825         }  
 826       } else {
 827         status = -1;
 828       }
 829     }
 830   }
 831   
 832   return status;
 833 }
 834 
 835 /*
 836 ** The DEPCA interrupt handler. 
 837 */
 838 static void
 839 depca_interrupt(int irq, void *dev_id, struct pt_regs * regs)
     /* [previous][next][first][last][top][bottom][index][help] */
 840 {
 841   struct device *dev = (struct device *)(irq2dev_map[irq]);
 842   struct depca_private *lp;
 843   s16 csr0, nicsr;
 844   u_long ioaddr;
 845 
 846   if (dev == NULL) {
 847     printk ("depca_interrupt(): irq %d for unknown device.\n", irq);
 848   } else {
 849     lp = (struct depca_private *)dev->priv;
 850     ioaddr = dev->base_addr;
 851     
 852     if (dev->interrupt)
 853       printk("%s: Re-entering the interrupt handler.\n", dev->name);
 854 
 855     dev->interrupt = MASK_INTERRUPTS;
 856 
 857     /* mask the DEPCA board interrupts and turn on the LED */
 858     nicsr = inb(DEPCA_NICSR);
 859     nicsr |= (IM|LED);
 860     outb(nicsr, DEPCA_NICSR);
 861 
 862     outw(CSR0, DEPCA_ADDR);
 863     csr0 = inw(DEPCA_DATA);
 864 
 865     /* Acknowledge all of the current interrupt sources ASAP. */
 866     outw(csr0 & INTE, DEPCA_DATA);
 867 
 868     if (csr0 & RINT)                   /* Rx interrupt (packet arrived) */
 869       depca_rx(dev);
 870 
 871     if (csr0 & TINT)                   /* Tx interrupt (packet sent) */
 872       depca_tx(dev);
 873 
 874     if ((TX_BUFFS_AVAIL >= 0) && dev->tbusy) { /* any resources available? */
 875       dev->tbusy = 0;                  /* clear TX busy flag */
 876       mark_bh(NET_BH);
 877     }
 878 
 879     /* Unmask the DEPCA board interrupts and turn off the LED */
 880     nicsr = (nicsr & ~IM & ~LED);
 881     outb(nicsr, DEPCA_NICSR);
 882 
 883     dev->interrupt = UNMASK_INTERRUPTS;
 884   }
 885 
 886   return;
 887 }
 888 
 889 static int
 890 depca_rx(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 891 {
 892   struct depca_private *lp = (struct depca_private *)dev->priv;
 893   int i, entry;
 894   s32 status;
 895 
 896   for (entry=lp->rx_new; 
 897        !(readl(&lp->rx_ring[entry].base) & R_OWN);
 898        entry=lp->rx_new){
 899     status = readl(&lp->rx_ring[entry].base) >> 16 ;
 900     if (status & R_STP) {                      /* Remember start of frame */
 901       lp->rx_old = entry;
 902     }
 903     if (status & R_ENP) {                      /* Valid frame status */
 904       if (status & R_ERR) {                    /* There was an error. */
 905         lp->stats.rx_errors++;                 /* Update the error stats. */
 906         if (status & R_FRAM) lp->stats.rx_frame_errors++;
 907         if (status & R_OFLO) lp->stats.rx_over_errors++;
 908         if (status & R_CRC)  lp->stats.rx_crc_errors++;
 909         if (status & R_BUFF) lp->stats.rx_fifo_errors++;
 910       } else {  
 911         short len, pkt_len = readw(&lp->rx_ring[entry].msg_length);
 912         struct sk_buff *skb;
 913 
 914         skb = dev_alloc_skb(pkt_len+2);
 915         if (skb != NULL) {
 916           unsigned char *buf;
 917           skb_reserve(skb,2);               /* 16 byte align the IP header */
 918           buf = skb_put(skb,pkt_len);
 919           skb->dev = dev;
 920           if (entry < lp->rx_old) {         /* Wrapped buffer */
 921             len = (lp->rxRingMask - lp->rx_old + 1) * RX_BUFF_SZ;
 922             memcpy_fromio(buf, lp->rx_memcpy[lp->rx_old], len);
 923             memcpy_fromio(buf + len, lp->rx_memcpy[0], pkt_len-len);
 924           } else {                          /* Linear buffer */
 925             memcpy_fromio(buf, lp->rx_memcpy[lp->rx_old], pkt_len);
 926           }
 927 
 928           /* 
 929           ** Notify the upper protocol layers that there is another 
 930           ** packet to handle
 931           */
 932           skb->protocol=eth_type_trans(skb,dev);
 933           netif_rx(skb);
 934  
 935           /*
 936           ** Update stats
 937           */
 938           lp->stats.rx_packets++;
 939           for (i=1; i<DEPCA_PKT_STAT_SZ-1; i++) {
 940             if (pkt_len < (i*DEPCA_PKT_BIN_SZ)) {
 941               lp->pktStats.bins[i]++;
 942               i = DEPCA_PKT_STAT_SZ;
 943             }
 944           }
 945           if (buf[0] & 0x01) {              /* Multicast/Broadcast */
 946             if ((*(s16 *)&buf[0] == -1) &&
 947                 (*(s16 *)&buf[2] == -1) &&
 948                 (*(s16 *)&buf[4] == -1)) {
 949               lp->pktStats.broadcast++;
 950             } else {
 951               lp->pktStats.multicast++;
 952             }
 953           } else if ((*(s16 *)&buf[0] == *(s16 *)&dev->dev_addr[0]) &&
 954                      (*(s16 *)&buf[2] == *(s16 *)&dev->dev_addr[2]) &&
 955                      (*(s16 *)&buf[4] == *(s16 *)&dev->dev_addr[4])) {
 956             lp->pktStats.unicast++;
 957           }
 958           
 959           lp->pktStats.bins[0]++;           /* Duplicates stats.rx_packets */
 960           if (lp->pktStats.bins[0] == 0) {  /* Reset counters */
 961             memset((char *)&lp->pktStats, 0, sizeof(lp->pktStats));
 962           }
 963         } else {
 964           printk("%s: Memory squeeze, deferring packet.\n", dev->name);
 965           lp->stats.rx_dropped++;       /* Really, deferred. */
 966           break;
 967         }
 968       }
 969       /* Change buffer ownership for this last frame, back to the adapter */
 970       for (; lp->rx_old!=entry; lp->rx_old=(++lp->rx_old)&lp->rxRingMask) {
 971         writel(readl(&lp->rx_ring[lp->rx_old].base) | R_OWN, 
 972                                                 &lp->rx_ring[lp->rx_old].base);
 973       }
 974       writel(readl(&lp->rx_ring[entry].base) | R_OWN, &lp->rx_ring[entry].base);
 975     }
 976 
 977     /*
 978     ** Update entry information
 979     */
 980     lp->rx_new = (++lp->rx_new) & lp->rxRingMask;
 981     }
 982 
 983     return 0;
 984 }
 985 
 986 /*
 987 ** Buffer sent - check for buffer errors.
 988 */
 989 static int
 990 depca_tx(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
 991 {
 992   struct depca_private *lp = (struct depca_private *)dev->priv;
 993   int entry;
 994   s32 status;
 995   u_long ioaddr = dev->base_addr;
 996 
 997   for (entry = lp->tx_old; entry != lp->tx_new; entry = lp->tx_old) {
 998     status = readl(&lp->tx_ring[entry].base) >> 16 ;
 999 
1000     if (status < 0) {                          /* Packet not yet sent! */
1001       break;
1002     } else if (status & T_ERR) {               /* An error occured. */
1003       status = readl(&lp->tx_ring[entry].misc);
1004       lp->stats.tx_errors++;
1005       if (status & TMD3_RTRY) lp->stats.tx_aborted_errors++;
1006       if (status & TMD3_LCAR) lp->stats.tx_carrier_errors++;
1007       if (status & TMD3_LCOL) lp->stats.tx_window_errors++;
1008       if (status & TMD3_UFLO) lp->stats.tx_fifo_errors++;
1009       if (status & (TMD3_BUFF | TMD3_UFLO)) {
1010         /* Trigger an immediate send demand. */
1011         outw(CSR0, DEPCA_ADDR);
1012         outw(INEA | TDMD, DEPCA_DATA);
1013       }
1014     } else if (status & (T_MORE | T_ONE)) {
1015       lp->stats.collisions++;
1016     } else {
1017       lp->stats.tx_packets++;
1018     }
1019 
1020     /* Update all the pointers */
1021     lp->tx_old = (++lp->tx_old) & lp->txRingMask;
1022   }
1023 
1024   return 0;
1025 }
1026 
1027 static int
1028 depca_close(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1029 {
1030   struct depca_private *lp = (struct depca_private *)dev->priv;
1031   s16 nicsr;
1032   u_long ioaddr = dev->base_addr;
1033 
1034   dev->start = 0;
1035   dev->tbusy = 1;
1036 
1037   outw(CSR0, DEPCA_ADDR);
1038 
1039   if (depca_debug > 1) {
1040     printk("%s: Shutting down ethercard, status was %2.2x.\n",
1041            dev->name, inw(DEPCA_DATA));
1042   }
1043 
1044   /* 
1045   ** We stop the DEPCA here -- it occasionally polls
1046   ** memory if we don't. 
1047   */
1048   outw(STOP, DEPCA_DATA);
1049 
1050   /*
1051   ** Give back the ROM in case the user wants to go to DOS
1052   */
1053   if (lp->adapter != DEPCA) {
1054     nicsr = inb(DEPCA_NICSR);
1055     nicsr &= ~SHE;
1056     outb(nicsr, DEPCA_NICSR);
1057   }
1058 
1059   /*
1060   ** Free the associated irq
1061   */
1062   free_irq(dev->irq, NULL);
1063   irq2dev_map[dev->irq] = NULL;
1064 
1065   MOD_DEC_USE_COUNT;
1066 
1067   return 0;
1068 }
1069 
1070 static void LoadCSRs(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1071 {
1072   struct depca_private *lp = (struct depca_private *)dev->priv;
1073   u_long ioaddr = dev->base_addr;
1074 
1075   outw(CSR1, DEPCA_ADDR);                /* initialisation block address LSW */
1076   outw((u16)(lp->sh_mem & LA_MASK), DEPCA_DATA);
1077   outw(CSR2, DEPCA_ADDR);                /* initialisation block address MSW */
1078   outw((u16)((lp->sh_mem & LA_MASK) >> 16), DEPCA_DATA);
1079   outw(CSR3, DEPCA_ADDR);                /* ALE control */
1080   outw(ACON, DEPCA_DATA);
1081 
1082   outw(CSR0, DEPCA_ADDR);                /* Point back to CSR0 */
1083 
1084   return;
1085 }
1086 
1087 static int InitRestartDepca(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1088 {
1089   struct depca_private *lp = (struct depca_private *)dev->priv;
1090   u_long ioaddr = dev->base_addr;
1091   int i, status=0;
1092 
1093   /* Copy the shadow init_block to shared memory */
1094   memcpy_toio((char *)lp->sh_mem, &lp->init_block, sizeof(struct depca_init));
1095 
1096   outw(CSR0, DEPCA_ADDR);                /* point back to CSR0 */
1097   outw(INIT, DEPCA_DATA);                /* initialize DEPCA */
1098 
1099   /* wait for lance to complete initialisation */
1100   for (i=0;(i<100) && !(inw(DEPCA_DATA) & IDON); i++); 
1101 
1102   if (i!=100) {
1103     /* clear IDON by writing a "1", enable interrupts and start lance */
1104     outw(IDON | INEA | STRT, DEPCA_DATA);
1105     if (depca_debug > 2) {
1106       printk("%s: DEPCA open after %d ticks, init block 0x%08lx csr0 %4.4x.\n",
1107              dev->name, i, lp->sh_mem, inw(DEPCA_DATA));
1108     }
1109   } else {
1110     printk("%s: DEPCA unopen after %d ticks, init block 0x%08lx csr0 %4.4x.\n",
1111              dev->name, i, lp->sh_mem, inw(DEPCA_DATA));
1112     status = -1;
1113   }
1114 
1115   return status;
1116 }
1117 
1118 static struct enet_statistics *
1119 depca_get_stats(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1120 {
1121     struct depca_private *lp = (struct depca_private *)dev->priv;
1122 
1123     /* Null body since there is no framing error counter */
1124 
1125     return &lp->stats;
1126 }
1127 
1128 /*
1129 ** Set or clear the multicast filter for this adaptor.
1130 */
1131 static void
1132 set_multicast_list(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1133 {
1134   struct depca_private *lp = (struct depca_private *)dev->priv;
1135   u_long ioaddr = dev->base_addr;
1136   
1137   if (irq2dev_map[dev->irq] != NULL) {
1138     while(dev->tbusy);                /* Stop ring access */
1139     set_bit(0, (void*)&dev->tbusy);
1140     while(lp->tx_old != lp->tx_new);  /* Wait for the ring to empty */
1141 
1142     STOP_DEPCA;                       /* Temporarily stop the depca.  */
1143     depca_init_ring(dev);             /* Initialize the descriptor rings */
1144 
1145     if (dev->flags & IFF_PROMISC) {   /* Set promiscuous mode */
1146       lp->init_block.mode |= PROM;
1147     } else {
1148       SetMulticastFilter(dev);
1149       lp->init_block.mode &= ~PROM;   /* Unset promiscuous mode */
1150     }
1151 
1152     LoadCSRs(dev);                    /* Reload CSR3 */
1153     InitRestartDepca(dev);            /* Resume normal operation. */
1154     dev->tbusy = 0;                   /* Unlock the TX ring */
1155   }
1156 }
1157 
1158 /*
1159 ** Calculate the hash code and update the logical address filter
1160 ** from a list of ethernet multicast addresses.
1161 ** Big endian crc one liner is mine, all mine, ha ha ha ha!
1162 ** LANCE calculates its hash codes big endian.
1163 */
1164 static void SetMulticastFilter(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1165 {
1166   struct depca_private *lp = (struct depca_private *)dev->priv;
1167   struct dev_mc_list *dmi=dev->mc_list;
1168   char *addrs;
1169   int i, j, bit, byte;
1170   u16 hashcode;
1171   s32 crc, poly = CRC_POLYNOMIAL_BE;
1172 
1173   if (dev->flags & IFF_ALLMULTI) {         /* Set all multicast bits */
1174     for (i=0; i<(HASH_TABLE_LEN>>3); i++) {
1175       lp->init_block.mcast_table[i] = (char)0xff;
1176     }
1177   } else {
1178     for (i=0; i<(HASH_TABLE_LEN>>3); i++){ /* Clear the multicast table */
1179       lp->init_block.mcast_table[i]=0;
1180     }
1181                                            /* Add multicast addresses */
1182     for (i=0;i<dev->mc_count;i++) {        /* for each address in the list */
1183       addrs=dmi->dmi_addr;
1184       dmi=dmi->next;
1185       if ((*addrs & 0x01) == 1) {          /* multicast address? */ 
1186         crc = 0xffffffff;                  /* init CRC for each address */
1187         for (byte=0;byte<ETH_ALEN;byte++) {/* for each address byte */
1188                                            /* process each address bit */ 
1189           for (bit = *addrs++,j=0;j<8;j++, bit>>=1) {
1190             crc = (crc << 1) ^ ((((crc<0?1:0) ^ bit) & 0x01) ? poly : 0);
1191           }
1192         }
1193         hashcode = (crc & 1);              /* hashcode is 6 LSb of CRC ... */
1194         for (j=0;j<5;j++) {                /* ... in reverse order. */
1195           hashcode = (hashcode << 1) | ((crc>>=1) & 1);
1196         }                                      
1197         
1198         
1199         byte = hashcode >> 3;              /* bit[3-5] -> byte in filter */
1200         bit = 1 << (hashcode & 0x07);      /* bit[0-2] -> bit in byte */
1201         lp->init_block.mcast_table[byte] |= bit;
1202       }
1203     }
1204   }
1205 
1206   return;
1207 }
1208 
1209 /*
1210 ** ISA bus I/O device probe
1211 */
1212 static void isa_probe(struct device *dev, u_long ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
1213 {
1214   int i = num_depcas, maxSlots;
1215   s32 ports[] = DEPCA_IO_PORTS;
1216 
1217   if (!ioaddr && autoprobed) return ;          /* Been here before ! */
1218   if (ioaddr > 0x400) return;                  /* EISA Address */
1219   if (i >= MAX_NUM_DEPCAS) return;             /* Too many ISA adapters */
1220 
1221   if (ioaddr == 0) {                           /* Autoprobing */
1222     maxSlots = MAX_NUM_DEPCAS;
1223   } else {                                     /* Probe a specific location */
1224     ports[i] = ioaddr;
1225     maxSlots = i + 1;
1226   }
1227 
1228   for (; (i<maxSlots) && (dev!=NULL) && ports[i]; i++) {
1229     if (DevicePresent(ports[i]) == 0) { 
1230       if (check_region(ports[i], DEPCA_TOTAL_SIZE) == 0) {
1231         if ((dev = alloc_device(dev, ports[i])) != NULL) {
1232           if (depca_hw_init(dev, ports[i]) == 0) {
1233             num_depcas++;
1234           }
1235           num_eth++;
1236         }
1237       } else if (autoprobed) {
1238         printk("%s: region already allocated at 0x%04x.\n", dev->name,ports[i]);
1239       }
1240     }
1241   }
1242 
1243   return;
1244 }
1245 
1246 /*
1247 ** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually
1248 ** the motherboard. Upto 15 EISA devices are supported.
1249 */
1250 static void eisa_probe(struct device *dev, u_long ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
1251 {
1252   int i, maxSlots;
1253   u_long iobase;
1254   char name[DEPCA_STRLEN];
1255 
1256   if (!ioaddr && autoprobed) return ;            /* Been here before ! */
1257   if ((ioaddr < 0x400) && (ioaddr > 0)) return;  /* ISA Address */
1258 
1259   if (ioaddr == 0) {                           /* Autoprobing */
1260     iobase = EISA_SLOT_INC;                    /* Get the first slot address */
1261     i = 1;
1262     maxSlots = MAX_EISA_SLOTS;
1263   } else {                                     /* Probe a specific location */
1264     iobase = ioaddr;
1265     i = (ioaddr >> 12);
1266     maxSlots = i + 1;
1267   }
1268   if ((iobase & 0x0fff) == 0) iobase += DEPCA_EISA_IO_PORTS;
1269 
1270   for (; (i<maxSlots) && (dev!=NULL); i++, iobase+=EISA_SLOT_INC) {
1271     if (EISA_signature(name, EISA_ID)) {
1272       if (DevicePresent(iobase) == 0) { 
1273         if (check_region(iobase, DEPCA_TOTAL_SIZE) == 0) {
1274           if ((dev = alloc_device(dev, iobase)) != NULL) {
1275             if (depca_hw_init(dev, iobase) == 0) {
1276               num_depcas++;
1277             }
1278             num_eth++;
1279           }
1280         } else if (autoprobed) {
1281           printk("%s: region already allocated at 0x%04lx.\n",dev->name,iobase);
1282         }
1283       }
1284     }
1285   }
1286 
1287   return;
1288 }
1289 
1290 /*
1291 ** Allocate the device by pointing to the next available space in the
1292 ** device structure. Should one not be available, it is created.
1293 */
1294 static struct device *alloc_device(struct device *dev, u_long iobase)
     /* [previous][next][first][last][top][bottom][index][help] */
1295 {
1296   int addAutoProbe = 0;
1297   struct device *tmp = NULL, *ret;
1298   int (*init)(struct device *) = NULL;
1299 
1300   /*
1301   ** Check the device structures for an end of list or unused device
1302   */
1303   if (!loading_module) {
1304     while (dev->next != NULL) {
1305       if ((dev->base_addr == DEPCA_NDA) || (dev->base_addr == 0)) break;
1306       dev = dev->next;                     /* walk through eth device list */
1307       num_eth++;                           /* increment eth device number */
1308     }
1309 
1310     /*
1311     ** If an autoprobe is requested for another device, we must re-insert
1312     ** the request later in the list. Remember the current information.
1313     */
1314     if ((dev->base_addr == 0) && (num_depcas > 0)) {
1315       addAutoProbe++;
1316       tmp = dev->next;                     /* point to the next device */
1317       init = dev->init;                    /* remember the probe function */
1318     }
1319 
1320     /*
1321     ** If at end of list and can't use current entry, malloc one up. 
1322     ** If memory could not be allocated, print an error message.
1323     */
1324     if ((dev->next == NULL) &&  
1325         !((dev->base_addr == DEPCA_NDA) || (dev->base_addr == 0))){
1326       dev->next = (struct device *)kmalloc(sizeof(struct device) + 8,
1327                                            GFP_KERNEL);
1328 
1329       dev = dev->next;                     /* point to the new device */
1330       if (dev == NULL) {
1331         printk("eth%d: Device not initialised, insufficient memory\n",
1332                num_eth);
1333       } else {
1334         /*
1335         ** If the memory was allocated, point to the new memory area
1336         ** and initialize it (name, I/O address, next device (NULL) and
1337         ** initialisation probe routine).
1338         */
1339         dev->name = (char *)(dev + sizeof(struct device));
1340         if (num_eth > 9999) {
1341           sprintf(dev->name,"eth????");    /* New device name */
1342         } else {
1343           sprintf(dev->name,"eth%d", num_eth);/* New device name */
1344         }
1345         dev->base_addr = iobase;           /* assign the io address */
1346         dev->next = NULL;                  /* mark the end of list */
1347         dev->init = &depca_probe;          /* initialisation routine */
1348         num_depcas++;
1349       }
1350     }
1351     ret = dev;                             /* return current struct, or NULL */
1352   
1353     /*
1354     ** Now figure out what to do with the autoprobe that has to be inserted.
1355     ** Firstly, search the (possibly altered) list for an empty space.
1356     */
1357     if (ret != NULL) {
1358       if (addAutoProbe) {
1359         for (;(tmp->next!=NULL) && (tmp->base_addr!=DEPCA_NDA); tmp=tmp->next);
1360 
1361         /*
1362         ** If no more device structures and can't use the current one, malloc
1363         ** one up. If memory could not be allocated, print an error message.
1364         */
1365         if ((tmp->next == NULL) && !(tmp->base_addr == DEPCA_NDA)) {
1366           tmp->next = (struct device *)kmalloc(sizeof(struct device) + 8,
1367                                                GFP_KERNEL);
1368           tmp = tmp->next;                     /* point to the new device */
1369           if (tmp == NULL) {
1370             printk("%s: Insufficient memory to extend the device list.\n", 
1371                    dev->name);
1372           } else {
1373             /*
1374             ** If the memory was allocated, point to the new memory area
1375             ** and initialize it (name, I/O address, next device (NULL) and
1376             ** initialisation probe routine).
1377             */
1378             tmp->name = (char *)(tmp + sizeof(struct device));
1379             if (num_eth > 9999) {
1380               sprintf(tmp->name,"eth????");       /* New device name */
1381             } else {
1382               sprintf(tmp->name,"eth%d", num_eth);/* New device name */
1383             }
1384             tmp->base_addr = 0;                /* re-insert the io address */
1385             tmp->next = NULL;                  /* mark the end of list */
1386             tmp->init = init;                  /* initialisation routine */
1387           }
1388         } else {                               /* structure already exists */
1389           tmp->base_addr = 0;                  /* re-insert the io address */
1390         }
1391       }
1392     }
1393   } else {
1394     ret = dev;
1395   }
1396 
1397   return ret;
1398 }
1399 
1400 /*
1401 ** Look for a particular board name in the on-board Remote Diagnostics
1402 ** and Boot (readb) ROM. This will also give us a clue to the network RAM
1403 ** base address.
1404 */
1405 static void DepcaSignature(char *name, u_long paddr)
     /* [previous][next][first][last][top][bottom][index][help] */
1406 {
1407   u_int i,j,k;
1408   const char *signatures[] = DEPCA_SIGNATURE;
1409   char tmpstr[16];
1410 
1411   for (i=0;i<16;i++) {                  /* copy the first 16 bytes of ROM to */
1412     tmpstr[i] = readb(paddr+0xc000+i);  /* a temporary string */
1413   }
1414 
1415   strcpy(name,"");
1416   for (i=0;*signatures[i]!='\0' && *name=='\0';i++) {
1417     for (j=0,k=0;j<16 && k<strlen(signatures[i]);j++) {
1418       if (signatures[i][k] == tmpstr[j]) {              /* track signature */
1419         k++;
1420       } else {                     /* lost signature; begin search again */
1421         k=0;
1422       }
1423     }
1424     if (k == strlen(signatures[i])) {
1425       strcpy(name,signatures[i]);
1426     }
1427   }
1428 
1429   adapter = i - 1;
1430 
1431   return;
1432 }
1433 
1434 /*
1435 ** Look for a special sequence in the Ethernet station address PROM that
1436 ** is common across all DEPCA products. Note that the original DEPCA needs
1437 ** its ROM address counter to be initialized and enabled. Only enable
1438 ** if the first address octet is a 0x08 - this minimises the chances of
1439 ** messing around with some other hardware, but it assumes that this DEPCA
1440 ** card initialized itself correctly.
1441 ** 
1442 ** Search the Ethernet address ROM for the signature. Since the ROM address
1443 ** counter can start at an arbitrary point, the search must include the entire
1444 ** probe sequence length plus the (length_of_the_signature - 1).
1445 ** Stop the search IMMEDIATELY after the signature is found so that the
1446 ** PROM address counter is correctly positioned at the start of the
1447 ** ethernet address for later read out.
1448 */
1449 static int DevicePresent(u_long ioaddr)
     /* [previous][next][first][last][top][bottom][index][help] */
1450 {
1451   union {
1452     struct {
1453       u32 a;
1454       u32 b;
1455     } llsig;
1456     char Sig[sizeof(u32) << 1];
1457   } dev;
1458   short sigLength=0;
1459   s8 data;
1460   s16 nicsr;
1461   int i, j, status = 0;
1462 
1463   data = inb(DEPCA_PROM);                /* clear counter on DEPCA */
1464   data = inb(DEPCA_PROM);                /* read data */
1465 
1466   if (data == 0x08) {                    /* Enable counter on DEPCA */
1467     nicsr = inb(DEPCA_NICSR);
1468     nicsr |= AAC;
1469     outb(nicsr, DEPCA_NICSR);
1470   }
1471   
1472   dev.llsig.a = ETH_PROM_SIG;
1473   dev.llsig.b = ETH_PROM_SIG;
1474   sigLength = sizeof(u32) << 1;
1475 
1476   for (i=0,j=0;j<sigLength && i<PROBE_LENGTH+sigLength-1;i++) {
1477     data = inb(DEPCA_PROM);
1478     if (dev.Sig[j] == data) {    /* track signature */
1479       j++;
1480     } else {                     /* lost signature; begin search again */
1481       if (data == dev.Sig[0]) {  /* rare case.... */
1482         j=1;
1483       } else {
1484         j=0;
1485       }
1486     }
1487   }
1488 
1489   if (j!=sigLength) {
1490     status = -ENODEV;           /* search failed */
1491   }
1492 
1493   return status;
1494 }
1495 
1496 /*
1497 ** The DE100 and DE101 PROM accesses were made non-standard for some bizarre
1498 ** reason: access the upper half of the PROM with x=0; access the lower half
1499 ** with x=1.
1500 */
1501 static int get_hw_addr(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1502 {
1503   u_long ioaddr = dev->base_addr;
1504   int i, k, tmp, status = 0;
1505   u_short j, x, chksum;
1506 
1507   x = (((adapter == de100) || (adapter == de101)) ? 1 : 0);
1508 
1509   for (i=0,k=0,j=0;j<3;j++) {
1510     k <<= 1 ;
1511     if (k > 0xffff) k-=0xffff;
1512 
1513     k += (u_char) (tmp = inb(DEPCA_PROM + x));
1514     dev->dev_addr[i++] = (u_char) tmp;
1515     k += (u_short) ((tmp = inb(DEPCA_PROM + x)) << 8);
1516     dev->dev_addr[i++] = (u_char) tmp;
1517 
1518     if (k > 0xffff) k-=0xffff;
1519   }
1520   if (k == 0xffff) k=0;
1521 
1522   chksum = (u_char) inb(DEPCA_PROM + x);
1523   chksum |= (u_short) (inb(DEPCA_PROM + x) << 8);
1524   if (k != chksum) status = -1;
1525 
1526   return status;
1527 }
1528 
1529 /*
1530 ** Load a packet into the shared memory
1531 */
1532 static int load_packet(struct device *dev, struct sk_buff *skb)
     /* [previous][next][first][last][top][bottom][index][help] */
1533 {
1534   struct depca_private *lp = (struct depca_private *)dev->priv;
1535   int i, entry, end, len, status = 0;
1536 
1537   entry = lp->tx_new;                          /* Ring around buffer number. */
1538   end = (entry + (skb->len - 1) / TX_BUFF_SZ) & lp->txRingMask;
1539   if (!(readl(&lp->tx_ring[end].base) & T_OWN)) {/* Enough room? */
1540     /* 
1541     ** Caution: the write order is important here... don't set up the
1542     ** ownership rights until all the other information is in place.
1543     */
1544     if (end < entry) {                         /* wrapped buffer */
1545       len = (lp->txRingMask - entry + 1) * TX_BUFF_SZ;
1546       memcpy_toio(lp->tx_memcpy[entry], skb->data, len);
1547       memcpy_toio(lp->tx_memcpy[0], skb->data + len, skb->len - len);
1548     } else {                                   /* linear buffer */
1549       memcpy_toio(lp->tx_memcpy[entry], skb->data, skb->len);
1550     }
1551 
1552     /* set up the buffer descriptors */
1553     len = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len;
1554     for (i = entry; i != end; i = (++i) & lp->txRingMask) {
1555                                                /* clean out flags */
1556       writel(readl(&lp->tx_ring[i].base) & ~T_FLAGS, &lp->tx_ring[i].base);
1557       writew(0x0000, &lp->tx_ring[i].misc);    /* clears other error flags */
1558       writew(-TX_BUFF_SZ, &lp->tx_ring[i].length);/* packet length in buffer */
1559       len -= TX_BUFF_SZ;
1560     }
1561                                                /* clean out flags */
1562     writel(readl(&lp->tx_ring[end].base) & ~T_FLAGS, &lp->tx_ring[end].base);
1563     writew(0x0000, &lp->tx_ring[end].misc);    /* clears other error flags */
1564     writew(-len, &lp->tx_ring[end].length);    /* packet length in last buff */
1565 
1566                                                /* start of packet */
1567     writel(readl(&lp->tx_ring[entry].base) | T_STP, &lp->tx_ring[entry].base);
1568                                                /* end of packet */
1569     writel(readl(&lp->tx_ring[end].base) | T_ENP, &lp->tx_ring[end].base);
1570 
1571     for (i=end; i!=entry; --i) {
1572                                                /* ownership of packet */
1573       writel(readl(&lp->tx_ring[i].base) | T_OWN, &lp->tx_ring[i].base);
1574       if (i == 0) i=lp->txRingMask+1;
1575     }   
1576     writel(readl(&lp->tx_ring[entry].base) | T_OWN, &lp->tx_ring[entry].base);
1577  
1578     lp->tx_new = (++end) & lp->txRingMask;     /* update current pointers */
1579   } else {
1580     status = -1;
1581   }
1582 
1583   return status;
1584 }
1585 
1586 /*
1587 ** Look for a particular board name in the EISA configuration space
1588 */
1589 static int EISA_signature(char *name, s32 eisa_id)
     /* [previous][next][first][last][top][bottom][index][help] */
1590 {
1591   u_int i;
1592   const char *signatures[] = DEPCA_SIGNATURE;
1593   char ManCode[DEPCA_STRLEN];
1594   union {
1595     s32 ID;
1596     char Id[4];
1597   } Eisa;
1598   int status = 0;
1599 
1600   *name = '\0';
1601   Eisa.ID = inl(eisa_id);
1602 
1603   ManCode[0]=(((Eisa.Id[0]>>2)&0x1f)+0x40);
1604   ManCode[1]=(((Eisa.Id[1]&0xe0)>>5)+((Eisa.Id[0]&0x03)<<3)+0x40);
1605   ManCode[2]=(((Eisa.Id[2]>>4)&0x0f)+0x30);
1606   ManCode[3]=(( Eisa.Id[2]&0x0f)+0x30);
1607   ManCode[4]=(((Eisa.Id[3]>>4)&0x0f)+0x30);
1608   ManCode[5]='\0';
1609 
1610   for (i=0;(*signatures[i] != '\0') && (*name == '\0');i++) {
1611     if (strstr(ManCode, signatures[i]) != NULL) {
1612       strcpy(name,ManCode);
1613       status = 1;
1614     }
1615   }
1616 
1617   return status;
1618 }
1619 
1620 static void depca_dbg_open(struct device *dev)
     /* [previous][next][first][last][top][bottom][index][help] */
1621 {
1622   struct depca_private *lp = (struct depca_private *)dev->priv;
1623   u_long ioaddr = dev->base_addr;
1624   struct depca_init *p = (struct depca_init *)lp->sh_mem;
1625   int i; 
1626 
1627   if (depca_debug > 1){
1628     /* Copy the shadow init_block to shared memory */
1629     memcpy_toio((char *)lp->sh_mem,&lp->init_block,sizeof(struct depca_init));
1630 
1631     printk("%s: depca open with irq %d\n",dev->name,dev->irq);
1632     printk("Descriptor head addresses:\n");
1633     printk("\t0x%lx  0x%lx\n",(u_long)lp->rx_ring, (u_long)lp->tx_ring);
1634     printk("Descriptor addresses:\nRX: ");
1635     for (i=0;i<lp->rxRingMask;i++){
1636       if (i < 3) {
1637         printk("0x%8.8lx ", (long) &lp->rx_ring[i].base);
1638       }
1639     }
1640     printk("...0x%8.8lx\n", (long) &lp->rx_ring[i].base);
1641     printk("TX: ");
1642     for (i=0;i<lp->txRingMask;i++){
1643       if (i < 3) {
1644         printk("0x%8.8lx ", (long) &lp->tx_ring[i].base);
1645       }
1646     }
1647     printk("...0x%8.8lx\n", (long) &lp->tx_ring[i].base);
1648     printk("\nDescriptor buffers:\nRX: ");
1649     for (i=0;i<lp->rxRingMask;i++){
1650       if (i < 3) {
1651         printk("0x%8.8x  ", readl(&lp->rx_ring[i].base));
1652       }
1653     }
1654     printk("...0x%8.8x\n", readl(&lp->rx_ring[i].base));
1655     printk("TX: ");
1656     for (i=0;i<lp->txRingMask;i++){
1657       if (i < 3) {
1658         printk("0x%8.8x  ", readl(&lp->tx_ring[i].base));
1659       }
1660     }
1661     printk("...0x%8.8x\n", readl(&lp->tx_ring[i].base));
1662     printk("Initialisation block at 0x%8.8lx\n",lp->sh_mem);
1663     printk("\tmode: 0x%4.4x\n",readw(&p->mode));
1664     printk("\tphysical address: ");
1665     for (i=0;i<ETH_ALEN-1;i++){
1666       printk("%2.2x:",(u_char)readb(&p->phys_addr[i]));
1667     }
1668     printk("%2.2x\n",(u_char)readb(&p->phys_addr[i]));
1669     printk("\tmulticast hash table: ");
1670     for (i=0;i<(HASH_TABLE_LEN >> 3)-1;i++){
1671       printk("%2.2x:",(u_char)readb(&p->mcast_table[i]));
1672     }
1673     printk("%2.2x\n",(u_char)readb(&p->mcast_table[i]));
1674     printk("\trx_ring at: 0x%8.8x\n",readl(&p->rx_ring));
1675     printk("\ttx_ring at: 0x%8.8x\n",readl(&p->tx_ring));
1676     printk("dma_buffs: 0x%8.8lx\n",lp->dma_buffs);
1677     printk("Ring size:\nRX: %d  Log2(rxRingMask): 0x%8.8x\n", 
1678            (int)lp->rxRingMask + 1, 
1679            lp->rx_rlen);
1680     printk("TX: %d  Log2(txRingMask): 0x%8.8x\n", 
1681            (int)lp->txRingMask + 1, 
1682            lp->tx_rlen);
1683     outw(CSR2,DEPCA_ADDR);
1684     printk("CSR2&1: 0x%4.4x",inw(DEPCA_DATA));
1685     outw(CSR1,DEPCA_ADDR);
1686     printk("%4.4x\n",inw(DEPCA_DATA));
1687     outw(CSR3,DEPCA_ADDR);
1688     printk("CSR3: 0x%4.4x\n",inw(DEPCA_DATA));
1689   }
1690 
1691   return;
1692 }
1693 
1694 /*
1695 ** Perform IOCTL call functions here. Some are privileged operations and the
1696 ** effective uid is checked in those cases.
1697 ** All MCA IOCTLs will not work here and are for testing purposes only.
1698 */
1699 static int depca_ioctl(struct device *dev, struct ifreq *rq, int cmd)
     /* [previous][next][first][last][top][bottom][index][help] */
1700 {
1701   struct depca_private *lp = (struct depca_private *)dev->priv;
1702   struct depca_ioctl *ioc = (struct depca_ioctl *) &rq->ifr_data;
1703   int i, status = 0;
1704   u_long ioaddr = dev->base_addr;
1705   union {
1706     u8  addr[(HASH_TABLE_LEN * ETH_ALEN)];
1707     u16 sval[(HASH_TABLE_LEN * ETH_ALEN) >> 1];
1708     u32 lval[(HASH_TABLE_LEN * ETH_ALEN) >> 2];
1709   } tmp;
1710 
1711   switch(ioc->cmd) {
1712   case DEPCA_GET_HWADDR:             /* Get the hardware address */
1713     for (i=0; i<ETH_ALEN; i++) {
1714       tmp.addr[i] = dev->dev_addr[i];
1715     }
1716     ioc->len = ETH_ALEN;
1717     if (!(status = verify_area(VERIFY_WRITE, (void *)ioc->data, ioc->len))) {
1718       memcpy_tofs(ioc->data, tmp.addr, ioc->len);
1719     }
1720 
1721     break;
1722   case DEPCA_SET_HWADDR:             /* Set the hardware address */
1723     if (suser()) {
1724       if (!(status = verify_area(VERIFY_READ, (void *)ioc->data, ETH_ALEN))) {
1725         memcpy_fromfs(tmp.addr,ioc->data,ETH_ALEN);
1726         for (i=0; i<ETH_ALEN; i++) {
1727           dev->dev_addr[i] = tmp.addr[i];
1728         }
1729         while(dev->tbusy);              /* Stop ring access */
1730         set_bit(0, (void*)&dev->tbusy);
1731         while(lp->tx_old != lp->tx_new);/* Wait for the ring to empty */
1732 
1733         STOP_DEPCA;                     /* Temporarily stop the depca.  */
1734         depca_init_ring(dev);           /* Initialize the descriptor rings */
1735         LoadCSRs(dev);                  /* Reload CSR3 */
1736         InitRestartDepca(dev);          /* Resume normal operation. */
1737         dev->tbusy = 0;                 /* Unlock the TX ring */
1738       }
1739     } else {
1740       status = -EPERM;
1741     }
1742 
1743     break;
1744   case DEPCA_SET_PROM:               /* Set Promiscuous Mode */
1745     if (suser()) {
1746       while(dev->tbusy);                /* Stop ring access */
1747       set_bit(0, (void*)&dev->tbusy);
1748       while(lp->tx_old != lp->tx_new);  /* Wait for the ring to empty */
1749 
1750       STOP_DEPCA;                       /* Temporarily stop the depca.  */
1751       depca_init_ring(dev);             /* Initialize the descriptor rings */
1752       lp->init_block.mode |= PROM;      /* Set promiscuous mode */
1753 
1754       LoadCSRs(dev);                    /* Reload CSR3 */
1755       InitRestartDepca(dev);            /* Resume normal operation. */
1756       dev->tbusy = 0;                   /* Unlock the TX ring */
1757     } else {
1758       status = -EPERM;
1759     }
1760 
1761     break;
1762   case DEPCA_CLR_PROM:               /* Clear Promiscuous Mode */
1763     if (suser()) {
1764       while(dev->tbusy);                /* Stop ring access */
1765       set_bit(0, (void*)&dev->tbusy);
1766       while(lp->tx_old != lp->tx_new);  /* Wait for the ring to empty */
1767 
1768       STOP_DEPCA;                       /* Temporarily stop the depca.  */
1769       depca_init_ring(dev);             /* Initialize the descriptor rings */
1770       lp->init_block.mode &= ~PROM;     /* Clear promiscuous mode */
1771 
1772       LoadCSRs(dev);                    /* Reload CSR3 */
1773       InitRestartDepca(dev);            /* Resume normal operation. */
1774       dev->tbusy = 0;                   /* Unlock the TX ring */
1775     } else {
1776       status = -EPERM;
1777     }
1778 
1779     break;
1780   case DEPCA_SAY_BOO:                /* Say "Boo!" to the kernel log file */
1781     printk("%s: Boo!\n", dev->name);
1782 
1783     break;
1784   case DEPCA_GET_MCA:                /* Get the multicast address table */
1785     ioc->len = (HASH_TABLE_LEN >> 3);
1786     if (!(status = verify_area(VERIFY_WRITE, ioc->data, ioc->len))) {
1787       memcpy_tofs(ioc->data, lp->init_block.mcast_table, ioc->len); 
1788     }
1789 
1790     break;
1791   case DEPCA_SET_MCA:                /* Set a multicast address */
1792     if (suser()) {
1793       if (!(status=verify_area(VERIFY_READ, ioc->data, ETH_ALEN*ioc->len))) {
1794         memcpy_fromfs(tmp.addr, ioc->data, ETH_ALEN * ioc->len);
1795         set_multicast_list(dev);
1796       }
1797     } else {
1798       status = -EPERM;
1799     }
1800 
1801     break;
1802   case DEPCA_CLR_MCA:                /* Clear all multicast addresses */
1803     if (suser()) {
1804       set_multicast_list(dev);
1805     } else {
1806       status = -EPERM;
1807     }
1808 
1809     break;
1810   case DEPCA_MCA_EN:                 /* Enable pass all multicast addressing */
1811     if (suser()) {
1812       set_multicast_list(dev);
1813     } else {
1814       status = -EPERM;
1815     }
1816 
1817     break;
1818   case DEPCA_GET_STATS:              /* Get the driver statistics */
1819     cli();
1820     ioc->len = sizeof(lp->pktStats);
1821     if (!(status=verify_area(VERIFY_WRITE, ioc->data, ioc->len))) {
1822       memcpy_tofs(ioc->data, &lp->pktStats, ioc->len); 
1823     }
1824     sti();
1825 
1826     break;
1827   case DEPCA_CLR_STATS:              /* Zero out the driver statistics */
1828     if (suser()) {
1829       cli();
1830       memset(&lp->pktStats, 0, sizeof(lp->pktStats));
1831       sti();
1832     } else {
1833       status = -EPERM;
1834     }
1835 
1836     break;
1837   case DEPCA_GET_REG:                /* Get the DEPCA Registers */
1838     i=0;
1839     tmp.sval[i++] = inw(DEPCA_NICSR);
1840     outw(CSR0, DEPCA_ADDR);              /* status register */
1841     tmp.sval[i++] = inw(DEPCA_DATA);
1842     memcpy(&tmp.sval[i], &lp->init_block, sizeof(struct depca_init));
1843     ioc->len = i+sizeof(struct depca_init);
1844     if (!(status=verify_area(VERIFY_WRITE, ioc->data, ioc->len))) {
1845       memcpy_tofs(ioc->data, tmp.addr, ioc->len);
1846     }
1847 
1848     break;
1849   default:
1850     status = -EOPNOTSUPP;
1851   }
1852 
1853   return status;
1854 }
1855 
1856 #ifdef MODULE
1857 static char devicename[9] = { 0, };
1858 static struct device thisDepca = {
1859   devicename,  /* device name is inserted by /linux/drivers/net/net_init.c */
1860   0, 0, 0, 0,
1861   0x200, 7,    /* I/O address, IRQ */
1862   0, 0, 0, NULL, depca_probe };
1863 
1864 static int irq=7;       /* EDIT THESE LINE FOR YOUR CONFIGURATION */
1865 static int io=0x200;    /* Or use the irq= io= options to insmod */
1866 
1867 /* See depca_probe() for autoprobe messages when a module */    
1868 int
1869 init_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
1870 {
1871   thisDepca.irq=irq;
1872   thisDepca.base_addr=io;
1873 
1874   if (register_netdev(&thisDepca) != 0)
1875     return -EIO;
1876 
1877   return 0;
1878 }
1879 
1880 void
1881 cleanup_module(void)
     /* [previous][next][first][last][top][bottom][index][help] */
1882 {
1883   if (thisDepca.priv) {
1884     kfree(thisDepca.priv);
1885     thisDepca.priv = NULL;
1886   }
1887   thisDepca.irq=0;
1888 
1889   unregister_netdev(&thisDepca);
1890   release_region(thisDepca.base_addr, DEPCA_TOTAL_SIZE);
1891 }
1892 #endif /* MODULE */
1893 
1894 
1895 /*
1896  * Local variables:
1897  *  kernel-compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O2 -m486 -c depca.c"
1898  *
1899  *  module-compile-command: "gcc -D__KERNEL__ -DMODULE -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O2 -m486 -c depca.c"
1900  * End:
1901  */

/* [previous][next][first][last][top][bottom][index][help] */