tag | line | file | source code |
host_no | 667 | drivers/scsi/53c7,8xx.c | for (h = first_host; h && h->host_no != host; h = h->next); |
host_no | 908 | drivers/scsi/53c7,8xx.c | host->host_no, hostdata->chip); |
host_no | 923 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : using %s mapped access\n", host->host_no, |
host_no | 961 | drivers/scsi/53c7,8xx.c | host->host_no, host->this_id); |
host_no | 968 | drivers/scsi/53c7,8xx.c | printk("scsi%d : using initiator ID %d\n", host->host_no, |
host_no | 1018 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : burst mode disabled\n", host->host_no); |
host_no | 1027 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : burst length %d\n", host->host_no, i); |
host_no | 1044 | drivers/scsi/53c7,8xx.c | host->host_no, expected_ccf, ccf); |
host_no | 1062 | drivers/scsi/53c7,8xx.c | host->host_no, ccf); |
host_no | 1068 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : using %dMHz SCSI clock\n", host->host_no, |
host_no | 1123 | drivers/scsi/53c7,8xx.c | host->host_no, host->irq); |
host_no | 1129 | drivers/scsi/53c7,8xx.c | host->host_no, search->host_no); |
host_no | 1146 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : bus wedge, doing SCSI reset\n", host->host_no); |
host_no | 1314 | drivers/scsi/53c7,8xx.c | instance->host_no); |
host_no | 1785 | drivers/scsi/53c7,8xx.c | host->host_no, A_dsa_fields_start, Ent_dsa_code_template_end - |
host_no | 1788 | drivers/scsi/53c7,8xx.c | printk("scsi%d : NCR code relocated to 0x%lx (virt 0x%p)\n", host->host_no, |
host_no | 1823 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : chip not idle, aborting tests\n", host->host_no); |
host_no | 1842 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : test 1", host->host_no); |
host_no | 1860 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : driver test 1 timed out%s\n",host->host_no , |
host_no | 1872 | drivers/scsi/53c7,8xx.c | host->host_no, hostdata->test_completed); |
host_no | 1880 | drivers/scsi/53c7,8xx.c | host->host_no, hostdata->test_dest); |
host_no | 1885 | drivers/scsi/53c7,8xx.c | host->host_no, bus_to_virt(NCR53c7x0_read32(DSP_REG)), |
host_no | 1887 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : DSPS = 0x%x\n", host->host_no, |
host_no | 1922 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : chip not idle, aborting tests\n", host->host_no); |
host_no | 1946 | drivers/scsi/53c7,8xx.c | host->host_no, i, data + 8); |
host_no | 1947 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : status ", host->host_no); |
host_no | 1949 | drivers/scsi/53c7,8xx.c | printk ("\nscsi%d : message ", host->host_no); |
host_no | 1954 | drivers/scsi/53c7,8xx.c | host->host_no, i); |
host_no | 1956 | drivers/scsi/53c7,8xx.c | printk("scsi%d : not idle\n", host->host_no); |
host_no | 1961 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : test 2 timed out\n", host->host_no); |
host_no | 2092 | drivers/scsi/53c7,8xx.c | printk ("scsi%d: abnormal finished\n", host->host_no); |
host_no | 2136 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 2140 | drivers/scsi/53c7,8xx.c | host->host_no, c->pid); |
host_no | 2163 | drivers/scsi/53c7,8xx.c | host->host_no, c->pid); |
host_no | 2220 | drivers/scsi/53c7,8xx.c | host->host_no, dsp); |
host_no | 2333 | drivers/scsi/53c7,8xx.c | host->host_no, target, sxfer, scntl3); |
host_no | 2363 | drivers/scsi/53c7,8xx.c | host->host_no, target); |
host_no | 2425 | drivers/scsi/53c7,8xx.c | host->host_no, divisor / 10, divisor % 10); |
host_no | 2432 | drivers/scsi/53c7,8xx.c | host->host_no, syncs[i].div / 10, syncs[i].div % 10); |
host_no | 2437 | drivers/scsi/53c7,8xx.c | printk("scsi%d : selected synchronous period of %dns\n", host->host_no, |
host_no | 2445 | drivers/scsi/53c7,8xx.c | host->host_no, (int) sxfer, (int) scntl3); |
host_no | 2447 | drivers/scsi/53c7,8xx.c | sprintf (buf, "scsi%d : setting target %d to ", host->host_no, target); |
host_no | 2478 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : DSPS = 0x%x\n", host->host_no, dsps); |
host_no | 2493 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : target %d rejected SDTR\n", host->host_no, |
host_no | 2502 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 2510 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 2516 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : received message", host->host_no); |
host_no | 2538 | drivers/scsi/53c7,8xx.c | sprintf (buf, "scsi%d : target %d %s ", host->host_no, c->target, |
host_no | 2588 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : unexpected phase\n", host->host_no); |
host_no | 2591 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : selected by target %d\n", host->host_no, |
host_no | 2599 | drivers/scsi/53c7,8xx.c | host->host_no, (int) NCR53c7x0_read8(SDID_REG_800) & 7, |
host_no | 2618 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : CHECK CONDITION\n", host->host_no); |
host_no | 2621 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 2699 | drivers/scsi/53c7,8xx.c | printk("scsi%d : test%d complete\n", host->host_no, |
host_no | 2715 | drivers/scsi/53c7,8xx.c | host->host_no, NCR53c7x0_read32(DSA_REG), dsa); |
host_no | 2717 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->saved_data_pointer, |
host_no | 2722 | drivers/scsi/53c7,8xx.c | host->host_no, NCR53c7x0_read8(SXFER_REG), |
host_no | 2747 | drivers/scsi/53c7,8xx.c | host->host_no, virt_to_bus(dsa), dsa); |
host_no | 2750 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->saved_data_pointer, |
host_no | 2753 | drivers/scsi/53c7,8xx.c | printk("scsi%d : template code :\n", host->host_no); |
host_no | 2775 | drivers/scsi/53c7,8xx.c | host->host_no, virt_to_bus(dsa), dsa); |
host_no | 2779 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->saved_data_pointer, |
host_no | 2790 | drivers/scsi/53c7,8xx.c | host->host_no, NCR53c7x0_read32(DSA_REG), |
host_no | 2798 | drivers/scsi/53c7,8xx.c | printk("scsi%d : idle\n", host->host_no); |
host_no | 2812 | drivers/scsi/53c7,8xx.c | printk("scsi%d : DSA loaded with 0x%x (virt 0x%p)\n", host->host_no, |
host_no | 2823 | drivers/scsi/53c7,8xx.c | host->host_no, (int) NCR53c7x0_read8(SDID_REG_800) & ~0x80, |
host_no | 2834 | drivers/scsi/53c7,8xx.c | host->host_no, c->target, c->lun); |
host_no | 2837 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 2846 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 2850 | drivers/scsi/53c7,8xx.c | host->host_no, NCR53c7x0_read8(SXFER_REG), |
host_no | 2864 | drivers/scsi/53c7,8xx.c | printk("scsi%d : int_debug_panic received\n", host->host_no); |
host_no | 2873 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->saved_data_pointer, |
host_no | 2886 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->saved_data_pointer, bus_to_virt ( |
host_no | 2896 | drivers/scsi/53c7,8xx.c | host->host_no, datapath_residual (host)) ; |
host_no | 2911 | drivers/scsi/53c7,8xx.c | host->host_no, sxfer, scntl3); |
host_no | 2917 | drivers/scsi/53c7,8xx.c | host->host_no, (int) sxfer, (int) scntl3); |
host_no | 2928 | drivers/scsi/53c7,8xx.c | host->host_no, sbcl_to_phase (NCR53c7x0_read8 (SBCL_REG)), |
host_no | 2952 | drivers/scsi/53c7,8xx.c | host->host_no, sdid, c->target, where); |
host_no | 2963 | drivers/scsi/53c7,8xx.c | host->host_no, dsps); |
host_no | 3000 | drivers/scsi/53c7,8xx.c | host->host_no, (unsigned) dsps); |
host_no | 3108 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 3144 | drivers/scsi/53c7,8xx.c | sprintf (buf, "scsi%d : bs : failure : NCR not halted\n", host->host_no); |
host_no | 3152 | drivers/scsi/53c7,8xx.c | host->host_no, sizeof(struct NCR53c7x0_break)); |
host_no | 3409 | drivers/scsi/53c7,8xx.c | host->host_no, hostdata->num_cmds, host->can_queue, |
host_no | 3441 | drivers/scsi/53c7,8xx.c | host->host_no, size); |
host_no | 3467 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->target, cmd->lun); |
host_no | 3530 | drivers/scsi/53c7,8xx.c | printk("scsi%d : command is ", host->host_no); |
host_no | 3534 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : %d scatter/gather segments\n", host->host_no, |
host_no | 3645 | drivers/scsi/53c7,8xx.c | host->host_no, hostdata->sync[cmd->target].select_indirect); |
host_no | 3878 | drivers/scsi/53c7,8xx.c | printk("scsi%d : disabled or bad target %d lun %d\n", host->host_no, |
host_no | 3883 | drivers/scsi/53c7,8xx.c | printk("scsi%d : maximum commands exceeded\n", host->host_no); |
host_no | 3891 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 3954 | drivers/scsi/53c7,8xx.c | printk("scsi%d : new dsa is 0x%lx (virt 0x%p)\n", host->host_no, |
host_no | 3967 | drivers/scsi/53c7,8xx.c | printk("scsi%d : driver disabled\n", host->host_no); |
host_no | 3996 | drivers/scsi/53c7,8xx.c | printk ("scsi%d: no free slot\n", host->host_no); |
host_no | 4112 | drivers/scsi/53c7,8xx.c | host->host_no, tmp->target, tmp->lun); |
host_no | 4122 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4174 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : SIST0 0x%0x, SIST1 0x%0x\n", host->host_no, |
host_no | 4182 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : Selection Timeout\n", host->host_no); |
host_no | 4185 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->cmd->target, cmd->cmd->lun); |
host_no | 4187 | drivers/scsi/53c7,8xx.c | printk("scsi%d : dsp = 0x%x (virt 0x%p)\n", host->host_no, |
host_no | 4191 | drivers/scsi/53c7,8xx.c | printk("scsi%d : no command\n", host->host_no); |
host_no | 4223 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->cmd->target, cmd->cmd->lun); |
host_no | 4228 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4239 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->cmd->target, cmd->cmd->lun); |
host_no | 4242 | drivers/scsi/53c7,8xx.c | printk("scsi%d : parity error\n", host->host_no); |
host_no | 4254 | drivers/scsi/53c7,8xx.c | printk("scsi%d : gross error\n", host->host_no); |
host_no | 4285 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : SSTAT0_MA\n", host->host_no); |
host_no | 4291 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : Oh no Mr. Bill!\n", host->host_no); |
host_no | 4307 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : DMA FIFO not empty\n", host->host_no); |
host_no | 4310 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4401 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : INTFLY\n", host->host_no); |
host_no | 4422 | drivers/scsi/53c7,8xx.c | printk("scsi%d : very weird.\n", host->host_no); |
host_no | 4428 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4433 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->cmd->result); |
host_no | 4454 | drivers/scsi/53c7,8xx.c | host->host_no, tmp->pid, tmp->target, tmp->lun, tmp->result); |
host_no | 4476 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4491 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4516 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->cmd->pid, (int) cmd->cmd->target, |
host_no | 4520 | drivers/scsi/53c7,8xx.c | printk("scsi%d : no active command\n", host->host_no); |
host_no | 4526 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : ISTAT_SIP\n", host->host_no); |
host_no | 4532 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : ISTAT_DIP\n", host->host_no); |
host_no | 4543 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : DMA FIFO not empty\n", host->host_no); |
host_no | 4546 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4566 | drivers/scsi/53c7,8xx.c | printk("scsi%d : too many interrupts, halting", host->host_no); |
host_no | 4579 | drivers/scsi/53c7,8xx.c | host->host_no, virt_to_bus(hostdata->dsp), hostdata->dsp); |
host_no | 4624 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4849 | drivers/scsi/53c7,8xx.c | host->host_no, residual); |
host_no | 4909 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->cmd->target); |
host_no | 4953 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 4968 | drivers/scsi/53c7,8xx.c | host->host_no, where ? where : "unknown location", |
host_no | 4981 | drivers/scsi/53c7,8xx.c | printk("scsi%d: new dsp 0x%p\n", host->host_no, hostdata->dsp); |
host_no | 5055 | drivers/scsi/53c7,8xx.c | host->host_no, pcibios_strerror (tmp)); |
host_no | 5065 | drivers/scsi/53c7,8xx.c | host->host_no, reason ? reason : "unknown"); |
host_no | 5121 | drivers/scsi/53c7,8xx.c | printk("scsi%d : DSTAT=0x%x\n", host->host_no, (int) dstat); |
host_no | 5149 | drivers/scsi/53c7,8xx.c | " ", host->host_no); |
host_no | 5173 | drivers/scsi/53c7,8xx.c | " ", host->host_no); |
host_no | 5208 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 5240 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 5244 | drivers/scsi/53c7,8xx.c | printk(KERN_ALERT "scsi%d : illegal instruction\n", host->host_no); |
host_no | 5271 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : DSTAT_SIR\n", host->host_no); |
host_no | 5280 | drivers/scsi/53c7,8xx.c | printk(KERN_ALERT "scsi%d : failure at ", host->host_no); |
host_no | 5289 | drivers/scsi/53c7,8xx.c | printk(KERN_ALERT "scsi%d : failure at ", host->host_no); |
host_no | 5299 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 5437 | drivers/scsi/53c7,8xx.c | printk ("Bogus SCSI host %d; no hostdata\n", host->host_no); |
host_no | 5458 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : dropped interrupt for command %ld\n", host->host_no, |
host_no | 5468 | drivers/scsi/53c7,8xx.c | panic ("scsi%d : bloody fetus %d\n", host->host_no, cmd->pid); |
host_no | 5499 | drivers/scsi/53c7,8xx.c | host->host_no, me->pid); |
host_no | 5524 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->pid); |
host_no | 5529 | drivers/scsi/53c7,8xx.c | cmd->host->host_no); |
host_no | 5549 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : did this command ever run?\n", host->host_no); |
host_no | 5553 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 5633 | drivers/scsi/53c7,8xx.c | printk ("scsi%d: lost command %ld\n", host->host_no, cmd->pid); |
host_no | 5705 | drivers/scsi/53c7,8xx.c | cmd->host->host_no, saved, segment->address); |
host_no | 5761 | drivers/scsi/53c7,8xx.c | cmd->host->host_no, where, offset); |
host_no | 5765 | drivers/scsi/53c7,8xx.c | cmd->host->host_no, where); |
host_no | 5788 | drivers/scsi/53c7,8xx.c | printk("scsi%d : bad dsa virt 0x%p\n", host->host_no, dsa); |
host_no | 5794 | drivers/scsi/53c7,8xx.c | host->host_no, virt_to_bus (dsa), dsa, hostdata->dsa_msgout, |
host_no | 5834 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->target, |
host_no | 5862 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : issue queue\n", host->host_no); |
host_no | 5874 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->pid); |
host_no | 5881 | drivers/scsi/53c7,8xx.c | host->host_no, cmd->pid, cmd->target, cmd->lun); |
host_no | 5887 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 5898 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : schedule dsa array :\n", host->host_no); |
host_no | 5906 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : end schedule dsa array\n", host->host_no); |
host_no | 5908 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : reconnect_dsa_head :\n", host->host_no); |
host_no | 5917 | drivers/scsi/53c7,8xx.c | printk ("scsi%d: bad DSA pointer 0x%p", host->host_no, |
host_no | 5928 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : end reconnect_dsa_head\n", host->host_no); |
host_no | 5931 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 5958 | drivers/scsi/53c7,8xx.c | host->host_no, dbc_dcmd, NCR53c7x0_read32(DNAD_REG), |
host_no | 5974 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : DSP 0x%lx (virt 0x%p) ->\n", host->host_no, |
host_no | 5980 | drivers/scsi/53c7,8xx.c | host->host_no, NCR53c7x0_read8 (SDID_REG_800), |
host_no | 6098 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : loop detected in running list!\n", host->host_no); |
host_no | 6126 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 6167 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : nuking commands\n", host->host_no); |
host_no | 6173 | drivers/scsi/53c7,8xx.c | printk ("scsi%d : done. \n", host->host_no); |
host_no | 6175 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 6228 | drivers/scsi/53c7,8xx.c | host->host_no); |
host_no | 6305 | drivers/scsi/53c7,8xx.c | host->host_no, event_name (event.event), count, |
host_no | 6374 | drivers/scsi/53c7,8xx.c | host->host_no, hostdata->num_cmds); |
host_no | 1544 | drivers/scsi/53c7,8xx.h | host->host_no, #symbol, i, A_##symbol##_used[i] - \ |
host_no | 235 | drivers/scsi/AM53C974.c | printk("scsi%d : phase %s, latched at end of last command\n", instance->host_no, phases[i].name); |
host_no | 237 | drivers/scsi/AM53C974.c | printk("scsi%d : phase %s, real time\n", instance->host_no, phases[i].name); |
host_no | 257 | drivers/scsi/AM53C974.c | printk ("scsi%d: no currently connected command\n", instance->host_no); } |
host_no | 261 | drivers/scsi/AM53C974.c | printk ("scsi%d: no currently arbitrating command\n", instance->host_no); } |
host_no | 265 | drivers/scsi/AM53C974.c | printk ("scsi%d: issue_queue ", instance->host_no); |
host_no | 273 | drivers/scsi/AM53C974.c | printk ("scsi%d: disconnected_queue ", instance->host_no); |
host_no | 618 | drivers/scsi/AM53C974.c | instance->host_no, instance->this_id); |
host_no | 660 | drivers/scsi/AM53C974.c | printk("scsi%d: IRQ%d not free, detaching\n", instance->host_no, instance->irq); |
host_no | 666 | drivers/scsi/AM53C974.c | instance->host_no, search->host_no); } |
host_no | 820 | drivers/scsi/AM53C974.c | DEB_QUEUE(printk("scsi%d: AM53C974_queue_command called\n", instance->host_no)); |
host_no | 844 | drivers/scsi/AM53C974.c | DEB_QUEUE(printk("scsi%d : command added to %s of queue\n", instance->host_no, |
host_no | 956 | drivers/scsi/AM53C974.c | instance->host_no, dmastatus); |
host_no | 960 | drivers/scsi/AM53C974.c | panic("scsi%d: cannot recover\n", instance->host_no); } |
host_no | 1009 | drivers/scsi/AM53C974.c | instance->host_no, statreg, isreg, instreg, cfifo)); |
host_no | 1016 | drivers/scsi/AM53C974.c | printk("scsi%d : PARITY error\n", instance->host_no); |
host_no | 1025 | drivers/scsi/AM53C974.c | printk("scsi%d : ILLEGAL OPERATION error\n", instance->host_no); |
host_no | 1057 | drivers/scsi/AM53C974.c | printk("scsi%d: Invalid command interrupt\n", instance->host_no); |
host_no | 1061 | drivers/scsi/AM53C974.c | panic("scsi%d: cannot recover\n", instance->host_no); } |
host_no | 1121 | drivers/scsi/AM53C974.c | DEB(printk("scsi%d: REQUEST_SENSE command with nonzero use_sg\n", instance->host_no)); |
host_no | 1145 | drivers/scsi/AM53C974.c | printk("scsi%d: weird: service request when no command connected\n", instance->host_no); |
host_no | 1190 | drivers/scsi/AM53C974.c | instance->host_no, cmd->cmnd[0], cmd->target, cmd->lun)); |
host_no | 1198 | drivers/scsi/AM53C974.c | " the disconnected_queue\n", instance->host_no, cmd->target, |
host_no | 1224 | drivers/scsi/AM53C974.c | instance->host_no, cmd->SCp.phase, cmd->target, cmd->SCp.this_residual, cmd->SCp.buffers_residual, |
host_no | 1573 | drivers/scsi/AM53C974.c | instance->host_no, cmd->target, cmd->lun)); |
host_no | 1578 | drivers/scsi/AM53C974.c | instance->host_no, cmd->target, cmd->lun); |
host_no | 1594 | drivers/scsi/AM53C974.c | instance->host_no, cmd->target, cmd->lun)); |
host_no | 1604 | drivers/scsi/AM53C974.c | instance->host_no, cmd->cmnd[0], cmd->target, cmd->lun)); |
host_no | 1631 | drivers/scsi/AM53C974.c | DEB_MSG(printk("scsi%d : performing request sense\n", instance->host_no)); |
host_no | 1645 | drivers/scsi/AM53C974.c | DEB_MSG(printk("scsi%d : REQUEST SENSE added to head of issue queue\n",instance->host_no)); |
host_no | 1654 | drivers/scsi/AM53C974.c | instance->host_no, cmd->cmnd[0], cmd->target, cmd->lun)); |
host_no | 1679 | drivers/scsi/AM53C974.c | instance->host_no, cmd->cmnd[0], cmd->target, cmd->lun)); |
host_no | 1688 | drivers/scsi/AM53C974.c | instance->host_no, cmd->cmnd[0], cmd->target, cmd->lun)); |
host_no | 1706 | drivers/scsi/AM53C974.c | instance->host_no, cmd->cmnd[0], cmd->target, cmd->lun)); |
host_no | 1737 | drivers/scsi/AM53C974.c | printk("scsi%d: received extended message: ", instance->host_no); |
host_no | 1753 | drivers/scsi/AM53C974.c | printk("scsi%d: unknown message 0x%02x received\n",instance->host_no, msg); |
host_no | 1796 | drivers/scsi/AM53C974.c | printk("scsi%d: select error; %d residual bytes in FIFO\n", instance->host_no, cfifo); |
host_no | 1895 | drivers/scsi/AM53C974.c | printk("scsi %d: error: %d bytes in fifo, 2 expected\n", instance->host_no, cfifo); |
host_no | 1902 | drivers/scsi/AM53C974.c | printk("scsi %d: error: invalid host id\n", instance->host_no); |
host_no | 1907 | drivers/scsi/AM53C974.c | DEB_RESEL(printk("scsi %d: reselect; target: %d\n", instance->host_no, target)); |
host_no | 1912 | drivers/scsi/AM53C974.c | printk("scsi %d: error: upon reselection interrupt not in MSGIN\n", instance->host_no); |
host_no | 1918 | drivers/scsi/AM53C974.c | printk("scsi%d: error: expecting IDENTIFY message, got ", instance->host_no); |
host_no | 1955 | drivers/scsi/AM53C974.c | instance->host_no, target, lun, tag); |
host_no | 1958 | drivers/scsi/AM53C974.c | instance->host_no, target, lun); |
host_no | 1974 | drivers/scsi/AM53C974.c | instance->host_no, target, tmp->lun, tmp->tag)); |
host_no | 2110 | drivers/scsi/AM53C974.c | DEB_ABORT(printk("scsi%d : AM53C974_abort called -- trouble starts!!\n", instance->host_no)); |
host_no | 2118 | drivers/scsi/AM53C974.c | DEB_ABORT(printk("scsi%d: aborting connected command\n", instance->host_no)); |
host_no | 2131 | drivers/scsi/AM53C974.c | DEB_ABORT(printk("scsi%d : abort removed command from issue queue.\n", instance->host_no)); |
host_no | 2142 | drivers/scsi/AM53C974.c | printk("scsi%d : LOOP\n", instance->host_no); |
host_no | 2156 | drivers/scsi/AM53C974.c | DEB_ABORT(printk("scsi%d : abort failed, other command connected.\n", instance->host_no)); |
host_no | 2167 | drivers/scsi/AM53C974.c | DEB_ABORT(printk("scsi%d: aborting disconnected command\n", instance->host_no)); |
host_no | 2184 | drivers/scsi/AM53C974.c | DEB_ABORT(printk("scsi%d : abort failed, command not found.\n", instance->host_no)); |
host_no | 1621 | drivers/scsi/BusLogic.c | HostAdapter->HostNumber = Host->host_no; |
host_no | 413 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 417 | drivers/scsi/NCR5380.c | printk("scsi%d : phase %s\n", instance->host_no, phases[i].name); |
host_no | 743 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 748 | drivers/scsi/NCR5380.c | printk ("scsi%d: issue_queue\n", instance->host_no); |
host_no | 754 | drivers/scsi/NCR5380.c | printk ("scsi%d: disconnected_queue\n", instance->host_no); |
host_no | 845 | drivers/scsi/NCR5380.c | " be incorrectly cleared.\n", instance->host_no); |
host_no | 878 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 884 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 889 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 894 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 933 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 999 | drivers/scsi/NCR5380.c | printk("scsi%d : command added to %s of queue\n", instance->host_no, |
host_no | 1047 | drivers/scsi/NCR5380.c | printk("scsi%d : not connected\n", instance->host_no); |
host_no | 1089 | drivers/scsi/NCR5380.c | instance->host_no, tmp->target, tmp->lun); |
host_no | 1123 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 1141 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 1145 | drivers/scsi/NCR5380.c | printk("scsi%d : main() : done set false\n", instance->host_no); |
host_no | 1193 | drivers/scsi/NCR5380.c | printk("scsi%d : SEL interrupt\n", instance->host_no); |
host_no | 1199 | drivers/scsi/NCR5380.c | printk("scsi%d : PARITY interrupt\n", instance->host_no); |
host_no | 1204 | drivers/scsi/NCR5380.c | printk("scsi%d : RESET interrupt\n", instance->host_no); |
host_no | 1244 | drivers/scsi/NCR5380.c | host->host_no, __LINE__); |
host_no | 1338 | drivers/scsi/NCR5380.c | printk("scsi%d : starting arbitration, id = %d\n", instance->host_no, |
host_no | 1381 | drivers/scsi/NCR5380.c | printk("scsi%d : arbitration complete\n", instance->host_no); |
host_no | 1402 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 1416 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 1429 | drivers/scsi/NCR5380.c | printk("scsi%d : won arbitration\n", instance->host_no); |
host_no | 1486 | drivers/scsi/NCR5380.c | printk("scsi%d : selecting target %d\n", instance->host_no, cmd->target); |
host_no | 1510 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 1528 | drivers/scsi/NCR5380.c | printk("scsi%d : weirdness\n", instance->host_no); |
host_no | 1545 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 1587 | drivers/scsi/NCR5380.c | instance->host_no, cmd->target); |
host_no | 1618 | drivers/scsi/NCR5380.c | printk("scsi%d : nexus established.\n", instance->host_no); |
host_no | 1668 | drivers/scsi/NCR5380.c | printk("scsi%d : pio write %d bytes\n", instance->host_no, c); |
host_no | 1670 | drivers/scsi/NCR5380.c | printk("scsi%d : pio read %d bytes\n", instance->host_no, c); |
host_no | 1689 | drivers/scsi/NCR5380.c | printk("scsi%d : REQ detected\n", instance->host_no); |
host_no | 1695 | drivers/scsi/NCR5380.c | printk("scsi%d : phase mismatch\n", instance->host_no); |
host_no | 1744 | drivers/scsi/NCR5380.c | printk("scsi%d : req false, handshake complete\n", instance->host_no); |
host_no | 1767 | drivers/scsi/NCR5380.c | printk("scsi%d : residual %d\n", instance->host_no, c); |
host_no | 1902 | drivers/scsi/NCR5380.c | instance->host_no, instance->dma_channel, (p & SR_IO) ? "reading" : |
host_no | 1936 | drivers/scsi/NCR5380.c | printk("scsi%d : mode reg = 0x%X\n", instance->host_no, NCR5380_read(MODE_REG)); |
host_no | 2030 | drivers/scsi/NCR5380.c | instance->host_no, tmp, NCR5380_read(STATUS_REG)); |
host_no | 2140 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 2150 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 2261 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 2280 | drivers/scsi/NCR5380.c | instance->host_no, cmd->SCp.this_residual, |
host_no | 2328 | drivers/scsi/NCR5380.c | instance->host_no, cmd->target, cmd->lun); |
host_no | 2370 | drivers/scsi/NCR5380.c | instance->host_no, cmd->target, cmd->lun); |
host_no | 2380 | drivers/scsi/NCR5380.c | instance->host_no, cmd->target, cmd->lun); |
host_no | 2392 | drivers/scsi/NCR5380.c | instance->host_no, cmd->target, cmd->lun); |
host_no | 2409 | drivers/scsi/NCR5380.c | instance->host_no, cmd->target, cmd->lun); |
host_no | 2439 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 2460 | drivers/scsi/NCR5380.c | printk("scsi%d : REQUEST SENSE added to head of issue queue\n",instance->host_no); |
host_no | 2506 | drivers/scsi/NCR5380.c | " the disconnected_queue\n", instance->host_no, |
host_no | 2558 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 2568 | drivers/scsi/NCR5380.c | instance->host_no, (int) extended_msg[1], |
host_no | 2584 | drivers/scsi/NCR5380.c | instance->host_no, len); |
host_no | 2596 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 2600 | drivers/scsi/NCR5380.c | instance->host_no, extended_msg[2], extended_msg[1]); |
host_no | 2611 | drivers/scsi/NCR5380.c | printk("scsi%d: rejecting message ", instance->host_no); |
host_no | 2616 | drivers/scsi/NCR5380.c | instance->host_no, tmp, cmd->target, cmd->lun); |
host_no | 2619 | drivers/scsi/NCR5380.c | instance->host_no, extended_msg[1], extended_msg[0], cmd->target, cmd->lun); |
host_no | 2659 | drivers/scsi/NCR5380.c | printk("scsi%d : issued command, sleeping until %ul\n", instance->host_no, |
host_no | 2674 | drivers/scsi/NCR5380.c | printk("scsi%d : unknown phase\n", instance->host_no); |
host_no | 2686 | drivers/scsi/NCR5380.c | printk("scsi%d : poll timed out, sleeping until %ul\n", instance->host_no, |
host_no | 2736 | drivers/scsi/NCR5380.c | printk("scsi%d : reselect\n", instance->host_no); |
host_no | 2767 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 2812 | drivers/scsi/NCR5380.c | instance->host_no, target_mask, lun, tag); |
host_no | 2815 | drivers/scsi/NCR5380.c | instance->host_no, target_mask, lun); |
host_no | 2831 | drivers/scsi/NCR5380.c | instance->host_no, tmp->target, tmp->lun, tmp->tag); |
host_no | 2911 | drivers/scsi/NCR5380.c | printk("scsi%d : aborting command\n", instance->host_no); |
host_no | 2916 | drivers/scsi/NCR5380.c | printk("scsi%d : aborting command\n", instance->host_no); |
host_no | 2925 | drivers/scsi/NCR5380.c | printk("scsi%d : abort called\n", instance->host_no); |
host_no | 2939 | drivers/scsi/NCR5380.c | printk("scsi%d : aborting connected command\n", instance->host_no); |
host_no | 2969 | drivers/scsi/NCR5380.c | printk("scsi%d : abort going into loop.\n", instance->host_no); |
host_no | 2983 | drivers/scsi/NCR5380.c | instance->host_no); |
host_no | 2990 | drivers/scsi/NCR5380.c | else if (prev == tmp) printk("scsi%d : LOOP\n", instance->host_no); |
host_no | 3007 | drivers/scsi/NCR5380.c | printk("scsi%d : abort failed, command connected.\n", instance->host_no); |
host_no | 3042 | drivers/scsi/NCR5380.c | printk("scsi%d : aborting disconnected command.\n", instance->host_no); |
host_no | 3049 | drivers/scsi/NCR5380.c | printk("scsi%d : nexus reestablished.\n", instance->host_no); |
host_no | 3082 | drivers/scsi/NCR5380.c | " before abortion\n", instance->host_no); |
host_no | 333 | drivers/scsi/NCR5380.h | panic ("scsi%d : attempted unaligned DMA transfer\n", instance->host_no); |
host_no | 2638 | drivers/scsi/advansys.c | if (asc_host[i]->host_no == hostno) { |
host_no | 2675 | drivers/scsi/advansys.c | sprintf(cp, "\nDevices attached to SCSI Host %d:\n", shp->host_no); |
host_no | 4767 | drivers/scsi/advansys.c | (unsigned) s->next, s->extra_bytes, s->host_busy, s->host_no, |
host_no | 2829 | drivers/scsi/aha152x.c | if(aha152x_host[i] && aha152x_host[i]->host_no == hostno) |
host_no | 1222 | drivers/scsi/aha1542.c | printk("Sent BUS RESET to scsi host %d\n", SCpnt->host->host_no); |
host_no | 92 | drivers/scsi/aic7xxx_proc.c | if (HBAptr->host_no == hostno) |
host_no | 100 | drivers/scsi/aic7xxx_proc.c | if (HBAptr->host_no == hostno) |
host_no | 567 | drivers/scsi/constants.c | cmd->host->host_no, |
host_no | 1325 | drivers/scsi/eata_dma.c | HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision, |
host_no | 97 | drivers/scsi/eata_dma_proc.c | if (HBA_ptr->host_no == hostno) |
host_no | 128 | drivers/scsi/eata_dma_proc.c | HBA_ptr->host_no, SD(HBA_ptr)->name); |
host_no | 1009 | drivers/scsi/eata_pio.c | HBA_ptr->host_no, SD(HBA_ptr)->name, SD(HBA_ptr)->revision, |
host_no | 54 | drivers/scsi/eata_pio_proc.c | if (HBA_ptr->host_no == hostno) |
host_no | 73 | drivers/scsi/eata_pio_proc.c | HBA_ptr->host_no, SD(HBA_ptr)->name); |
host_no | 444 | drivers/scsi/fdomain.c | shpnt->host_no, shpnt->this_id ); |
host_no | 446 | drivers/scsi/fdomain.c | printk( "scsi%d <fdomain>: BIOS version ", shpnt->host_no ); |
host_no | 463 | drivers/scsi/fdomain.c | shpnt->host_no, |
host_no | 218 | drivers/scsi/g_NCR5380.c | instance->host_no, instance->irq); |
host_no | 223 | drivers/scsi/g_NCR5380.c | printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); |
host_no | 224 | drivers/scsi/g_NCR5380.c | printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); |
host_no | 227 | drivers/scsi/g_NCR5380.c | printk("scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int)instance->NCR5380_instance_name); |
host_no | 557 | drivers/scsi/g_NCR5380.c | cmd->host->host_no ANDP |
host_no | 594 | drivers/scsi/g_NCR5380.c | if (scsi_ptr->host_no == hostno) |
host_no | 599 | drivers/scsi/g_NCR5380.c | PRINTP("SCSI host number %d : %s\n" ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name); |
host_no | 299 | drivers/scsi/hosts.c | retval->host_no = max_scsi_hosts++; /* never reuse host_no (DB) */ |
host_no | 398 | drivers/scsi/hosts.c | shpnt->host_no, name); |
host_no | 246 | drivers/scsi/hosts.h | char host_no; /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */ |
host_no | 406 | drivers/scsi/pas16.c | instance->host_no, instance->irq); |
host_no | 411 | drivers/scsi/pas16.c | printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); |
host_no | 412 | drivers/scsi/pas16.c | printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); |
host_no | 419 | drivers/scsi/pas16.c | printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); |
host_no | 422 | drivers/scsi/pas16.c | printk("scsi%d : at 0x%04x", instance->host_no, (int) |
host_no | 503 | drivers/scsi/pas16.c | instance->host_no); |
host_no | 535 | drivers/scsi/pas16.c | instance->host_no); |
host_no | 347 | drivers/scsi/scsi.c | sh[index]->host_no); |
host_no | 352 | drivers/scsi/scsi.c | sh[index]->host_no); |
host_no | 818 | drivers/scsi/scsi.c | SCpnt->host->host_no, SCpnt->pid); |
host_no | 827 | drivers/scsi/scsi.c | printk("Unable to reset scsi host %d - ", SCpnt->host->host_no); |
host_no | 1165 | drivers/scsi/scsi.c | SCpnt->host->host_no, SCpnt->channel, SCpnt->target, SCpnt->cmnd, |
host_no | 1204 | drivers/scsi/scsi.c | host->host_no, temp, host->hostt->command); |
host_no | 1260 | drivers/scsi/scsi.c | "command : " , host->host_no, SCpnt->channel, target, buffer, |
host_no | 1358 | drivers/scsi/scsi.c | printk("scsi%d, channel%d : ", SCpnt->host->host_no, SCpnt->channel); |
host_no | 1455 | drivers/scsi/scsi.c | printk("In scsi_done(host = %d, result = %06x)\n", host->host_no, result); |
host_no | 1477 | drivers/scsi/scsi.c | SCpnt->host->host_no, SCpnt->channel, SCpnt->target, |
host_no | 1579 | drivers/scsi/scsi.c | " reset.\n", SCpnt->host->host_no, SCpnt->channel); |
host_no | 1701 | drivers/scsi/scsi.c | SCpnt->host->host_no, SCpnt->channel); |
host_no | 1831 | drivers/scsi/scsi.c | SCpnt->pid, SCpnt->host->host_no, (int) SCpnt->channel, |
host_no | 1919 | drivers/scsi/scsi.c | host->host_no); |
host_no | 2481 | drivers/scsi/scsi.c | size += sprintf(buffer+len,"scsi%2d: %s\n", (int) HBA_ptr->host_no, |
host_no | 2537 | drivers/scsi/scsi.c | while(scd && (scd->host->host_no != parameter[0] |
host_no | 2545 | drivers/scsi/scsi.c | while(HBA_ptr && HBA_ptr->host_no != parameter[0]) |
host_no | 2732 | drivers/scsi/scsi.c | shpnt->host_no, name); |
host_no | 2877 | drivers/scsi/scsi.c | shpnt->host_no + PROC_SCSI_FILE); |
host_no | 3109 | drivers/scsi/scsi.c | i++, SCpnt->host->host_no, |
host_no | 139 | drivers/scsi/scsi_ioctl.c | dev->host->host_no, |
host_no | 91 | drivers/scsi/scsi_proc.c | if (ino == (hpnt->host_no + PROC_SCSI_FILE)) { |
host_no | 94 | drivers/scsi/scsi_proc.c | hpnt->host_no, func); |
host_no | 97 | drivers/scsi/scsi_proc.c | length, hpnt->host_no, func)); |
host_no | 119 | drivers/scsi/scsi_proc.c | scsi_hba_dir->entry.low_ino = PROC_SCSI_FILE + hpnt->host_no; |
host_no | 121 | drivers/scsi/scsi_proc.c | hpnt->host_no); |
host_no | 263 | drivers/scsi/scsi_proc.c | scd->host->host_no, scd->channel, scd->id, scd->lun); |
host_no | 223 | drivers/scsi/sd.c | SCpnt->host->host_no, result); |
host_no | 387 | drivers/scsi/sd.c | rscsi_disks[DEVICE_NR(SCpnt->request.rq_dev)].device->host->host_no, |
host_no | 1335 | drivers/scsi/sd.c | SDp->host->host_no, SDp->channel, SDp->id, SDp->lun); |
host_no | 359 | drivers/scsi/seagate.c | hostno = instance->host_no; |
host_no | 511 | drivers/scsi/sg.c | SDp->host->host_no, SDp->channel, SDp->id, SDp->lun); |
host_no | 280 | drivers/scsi/sr.c | scsi_CDs[DEVICE_NR(SCpnt->request.rq_dev)].device->host->host_no, |
host_no | 932 | drivers/scsi/sr.c | SDp->host->host_no, SDp->channel, SDp->id, SDp->lun); |
host_no | 69 | drivers/scsi/sr_ioctl.c | scsi_CDs[target].device->host->host_no, |
host_no | 2148 | drivers/scsi/st.c | SDp->host->host_no, SDp->channel, SDp->id, SDp->lun); |
host_no | 250 | drivers/scsi/t128.c | instance->host_no, instance->irq); |
host_no | 255 | drivers/scsi/t128.c | printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no); |
host_no | 256 | drivers/scsi/t128.c | printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no); |
host_no | 260 | drivers/scsi/t128.c | printk("scsi%d : irq = %d\n", instance->host_no, instance->irq); |
host_no | 263 | drivers/scsi/t128.c | printk("scsi%d : at 0x%08x", instance->host_no, (int) |
host_no | 347 | drivers/scsi/t128.c | instance->host_no); |
host_no | 390 | drivers/scsi/t128.c | instance->host_no); |