root/drivers/net/Config.in

/* [previous][next][first][last][top][bottom][index][help] */
#
# Network device configuration
#
tristate 'Dummy net driver support' CONFIG_DUMMY
tristate 'SLIP (serial line) support' CONFIG_SLIP
if [ "$CONFIG_SLIP" != "n" ]; then
  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
fi
tristate 'PPP (point-to-point) support' CONFIG_PPP
if [ ! "$CONFIG_PPP" = "n" ]; then
  comment 'CCP compressors for PPP are only built as modules.'
fi
tristate 'Z8530 SCC kiss emulation driver for AX.25' CONFIG_SCC
tristate 'PLIP (parallel port) support' CONFIG_PLIP
tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER

tristate 'FRAD (Frame Relay Access Device) support' CONFIG_FRAD
if [ "$CONFIG_FRAD" = "y" -o "$CONFIG_FRAD" = "m" ]; then
  int '  Max open DLCI' CONFIG_DLCI_COUNT 24
  int '  Max DLCI per device' CONFIG_DLCI_MAX 8
  tristate '  Sangoma S502A FRAD support' CONFIG_SDLA
fi

bool 'Do you want to be offered ALPHA test drivers' CONFIG_NET_ALPHA
bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC
if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
  tristate 'WD80*3 support' CONFIG_WD80x3
  tristate 'SMC Ultra support' CONFIG_ULTRA
  tristate 'SMC 9194 support' CONFIG_SMC9194
fi
bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE
bool '3COM cards' CONFIG_NET_VENDOR_3COM
if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
  tristate '3c501 support' CONFIG_EL1
  tristate '3c503 support' CONFIG_EL2
  if [ "$CONFIG_NET_ALPHA" = "y" ]; then
    tristate '3c505 support' CONFIG_ELPLUS
    tristate '3c507 support' CONFIG_EL16
  fi
  tristate '3c509/3c579 support' CONFIG_EL3
  tristate '3c590 series (592/595/597) "Vortex" support' CONFIG_VORTEX
fi
bool 'Other ISA cards' CONFIG_NET_ISA
if [ "$CONFIG_NET_ISA" = "y" ]; then
  tristate 'Cabletron E21xx support' CONFIG_E2100
  tristate 'DEPCA support' CONFIG_DEPCA
  tristate 'EtherWorks 3 support' CONFIG_EWRK3
  if [ "$CONFIG_NET_ALPHA" = "y" ]; then
    bool 'SEEQ8005 support' CONFIG_SEEQ8005
    tristate 'AT1700 support' CONFIG_AT1700
    tristate 'FMV-181/182 support' CONFIG_FMV18X
    tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO
    tristate 'EtherExpress support' CONFIG_EEXPRESS
    tristate 'NI5210 support' CONFIG_NI52
    bool 'NI6510 support' CONFIG_NI65
    tristate 'WaveLAN support' CONFIG_WAVELAN
    tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I
  fi
  tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
  tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
  tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100
  tristate 'NE2000/NE1000 support' CONFIG_NE2000
  if [ "$CONFIG_AX25" = "y" ]; then
    bool 'Ottawa PI and PI/2 support' CONFIG_PI
    bool 'Gracilis PackeTwin support' CONFIG_PT
  fi
  bool 'SK_G16 support' CONFIG_SK_G16
fi
bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA
if [ "$CONFIG_NET_EISA" = "y" ]; then
  if [ "$CONFIG_NET_ALPHA" = "y" ]; then
    tristate 'Ansel Communications EISA 3200 support' CONFIG_AC3200
  fi
  tristate 'Apricot Xen-II on board ethernet' CONFIG_APRICOT
  tristate 'DE425, DE434, DE435, DE500 support' CONFIG_DE4X5
# tristate 'DEC 21040 PCI support' CONFIG_DEC_ELCP
# bool 'LPL T100V 100Mbs support' CONFIG_LPL_T100
# bool 'PCnet32 (32 bit VLB and PCI LANCE) support' CONFIG_PCNET32
  bool 'Zenith Z-Note support' CONFIG_ZNET
fi
bool 'Pocket and portable adaptors' CONFIG_NET_POCKET
if [ "$CONFIG_NET_POCKET" = "y" ]; then
  bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP
  tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600
  tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620
# bool 'Silicom pocket adaptor support' CONFIG_SILICOM_PEA
# bool 'WaveLAN PCMCIA support' CONFIG_WaveLAN
# bool '3 Com 3c589 PCMCIA support' CONFIG_3C589
fi
bool 'Token Ring driver support' CONFIG_TR
if [ "$CONFIG_TR" = "y" ]; then
  tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR
fi
tristate 'ARCnet support' CONFIG_ARCNET
if [ "$CONFIG_ARCNET" != "n" ]; then
  bool '  Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH
  bool '  Enable arc0s (ARCnet RFC1051 packet format)' CONFIG_ARCNET_1051
fi

/* [previous][next][first][last][top][bottom][index][help] */