root/drivers/scsi/seagate.h

/* [previous][next][first][last][top][bottom][index][help] */

INCLUDED FROM


   1 /*
   2  *      seagate.h Copyright (C) 1992 Drew Eckhardt 
   3  *      low level scsi driver header for ST01/ST02 by
   4  *              Drew Eckhardt 
   5  *
   6  *      <drew@colorado.edu>
   7  */
   8 
   9 #ifndef _SEAGATE_H
  10         #define SEAGATE_H
  11 /*
  12         $Header
  13 */
  14 #ifndef ASM
  15 int seagate_st0x_detect(Scsi_Host_Template *);
  16 int seagate_st0x_command(Scsi_Cmnd *);
  17 int seagate_st0x_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
  18 
  19 int seagate_st0x_abort(Scsi_Cmnd *);
  20 const char *seagate_st0x_info(struct Scsi_Host *);
  21 int seagate_st0x_reset(Scsi_Cmnd *); 
  22 int seagate_st0x_proc_info(char *,char **,off_t,int,int,int);
  23 
  24 #ifndef NULL
  25         #define NULL 0
  26 #endif
  27 
  28 #include <linux/kdev_t.h>
  29 int seagate_st0x_biosparam(Disk *, kdev_t, int*);
  30 
  31 #define SEAGATE_ST0X  {  NULL, NULL, NULL, seagate_st0x_proc_info, \
  32                          NULL, seagate_st0x_detect,     \
  33                          NULL,                                          \
  34                          seagate_st0x_info, seagate_st0x_command,       \
  35                          seagate_st0x_queue_command, seagate_st0x_abort, \
  36                          seagate_st0x_reset, NULL, seagate_st0x_biosparam, \
  37                          1, 7, SG_ALL, 1, 0, 0, DISABLE_CLUSTERING}
  38 #endif
  39 
  40 
  41 /*
  42         defining PARITY causes parity data to be checked
  43 */
  44 
  45 #define PARITY
  46 
  47 
  48 /*
  49         Thanks to Brian Antoine for the example code in his Messy-Loss ST-01
  50                 driver, and Mitsugu Suzuki for information on the ST-01
  51                 SCSI host.
  52 */
  53 
  54 /*
  55         CONTROL defines
  56 */
  57 
  58 #define CMD_RST                 0x01
  59 #define CMD_SEL                 0x02
  60 #define CMD_BSY                 0x04
  61 #define CMD_ATTN                0x08
  62 #define CMD_START_ARB           0x10
  63 #define CMD_EN_PARITY           0x20
  64 #define CMD_INTR                0x40
  65 #define CMD_DRVR_ENABLE         0x80
  66 
  67 /*
  68         STATUS
  69 */
  70 
  71 #define STAT_BSY                0x01
  72 #define STAT_MSG                0x02
  73 #define STAT_IO                 0x04
  74 #define STAT_CD                 0x08
  75 #define STAT_REQ                0x10
  76 #define STAT_SEL                0x20
  77 #define STAT_PARITY             0x40
  78 #define STAT_ARB_CMPL           0x80
  79 
  80 /* 
  81         REQUESTS
  82 */
  83 
  84 #define REQ_MASK (STAT_CD |  STAT_IO | STAT_MSG)
  85 #define REQ_DATAOUT 0
  86 #define REQ_DATAIN STAT_IO
  87 #define REQ_CMDOUT STAT_CD
  88 #define REQ_STATIN (STAT_CD | STAT_IO)
  89 #define REQ_MSGOUT (STAT_MSG | STAT_CD)
  90 #define REQ_MSGIN (STAT_MSG | STAT_CD | STAT_IO)
  91 
  92 extern volatile int seagate_st0x_timeout;
  93 
  94 #ifdef PARITY
  95         #define BASE_CMD CMD_EN_PARITY
  96 #else
  97         #define BASE_CMD  0
  98 #endif
  99 
 100 /*
 101         Debugging code
 102 */
 103 
 104 #define PHASE_BUS_FREE 1
 105 #define PHASE_ARBITRATION 2
 106 #define PHASE_SELECTION 4
 107 #define PHASE_DATAIN 8 
 108 #define PHASE_DATAOUT 0x10
 109 #define PHASE_CMDOUT 0x20
 110 #define PHASE_MSGIN 0x40
 111 #define PHASE_MSGOUT 0x80
 112 #define PHASE_STATUSIN 0x100
 113 #define PHASE_ETC (PHASE_DATAIN | PHASE_DATA_OUT | PHASE_CMDOUT | PHASE_MSGIN | PHASE_MSGOUT | PHASE_STATUSIN)
 114 #define PRINT_COMMAND 0x200
 115 #define PHASE_EXIT 0x400
 116 #define PHASE_RESELECT 0x800
 117 #define DEBUG_FAST 0x1000
 118 #define DEBUG_SG   0x2000
 119 #define DEBUG_LINKED    0x4000
 120 #define DEBUG_BORKEN    0x8000
 121 
 122 /* 
 123  *      Control options - these are timeouts specified in .01 seconds.
 124  */
 125 
 126 /* 30, 20 work */
 127 #define ST0X_BUS_FREE_DELAY 25
 128 #define ST0X_SELECTION_DELAY 25
 129 
 130 #define eoi() __asm__("push %%eax\nmovb $0x20, %%al\noutb %%al, $0x20\npop %%eax"::)
 131         
 132 #define SEAGATE 1       /* these determine the type of the controller */
 133 #define FD      2
 134 
 135 #define ST0X_ID_STR     "Seagate ST-01/ST-02"
 136 #define FD_ID_STR       "TMC-8XX/TMC-950"
 137 
 138 #endif
 139 

/* [previous][next][first][last][top][bottom][index][help] */