tag | line | file | source code |
ctrl | 154 | drivers/cdrom/isp16.c | u_char ctrl; |
ctrl | 165 | drivers/cdrom/isp16.c | ctrl = ISP16_IN( ISP16_CTRL_PORT ) & 0xFC; |
ctrl | 166 | drivers/cdrom/isp16.c | ISP16_OUT( ISP16_CTRL_PORT, ctrl ); |
ctrl | 186 | drivers/cdrom/isp16.c | ISP16_OUT( ISP16_CTRL_PORT, ctrl ); |
ctrl | 195 | drivers/cdrom/isp16.c | ISP16_OUT( ISP16_CTRL_PORT, ctrl ); |
ctrl | 203 | drivers/cdrom/isp16.c | u_char ctrl; |
ctrl | 212 | drivers/cdrom/isp16.c | ctrl = ISP16_IN( ISP16_CTRL_PORT ); |
ctrl | 222 | drivers/cdrom/isp16.c | ISP16_OUT( ISP16_CTRL_PORT, ctrl ); |
ctrl | 1169 | drivers/char/istallion.c | cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; |
ctrl | 1244 | drivers/char/istallion.c | cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; |
ctrl | 2317 | drivers/char/istallion.c | cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl; |
ctrl | 2471 | drivers/char/istallion.c | cp = &ap->ctrl; |
ctrl | 309 | drivers/char/scc.c | OutReg(scc->ctrl, reg, (scc->wreg[reg] = val)); |
ctrl | 315 | drivers/char/scc.c | OutReg(scc->ctrl, reg, (scc->wreg[reg] |= val)); |
ctrl | 321 | drivers/char/scc.c | OutReg(scc->ctrl, reg, (scc->wreg[reg] &= ~val)); |
ctrl | 721 | drivers/char/scc.c | default : printk("scc_isr(): unknown interrupt status (addr %4.4x, state %2.2x)\n",scc->ctrl,vector); |
ctrl | 768 | drivers/char/scc.c | Outb(scc->ctrl,0x38); /* Reset Highest IUS" opcode to WR0 */ |
ctrl | 850 | drivers/char/scc.c | Outb(scc->ctrl, RES_Tx_P); /* clear int */ |
ctrl | 863 | drivers/char/scc.c | Outb(scc->ctrl, RES_Tx_CRC); /* reset CRC generator */ |
ctrl | 867 | drivers/char/scc.c | Outb(scc->ctrl, RES_EOM_L); |
ctrl | 876 | drivers/char/scc.c | Outb(scc->ctrl, RES_Tx_P); /* reset pending int */ |
ctrl | 916 | drivers/char/scc.c | status = InReg(scc->ctrl,R0); |
ctrl | 934 | drivers/char/scc.c | OutReg(scc->ctrl,R14,SEARCH|scc->wreg[R14]); /* DPLL: enter search mode */ |
ctrl | 957 | drivers/char/scc.c | Outb(scc->ctrl, RES_Tx_P); |
ctrl | 958 | drivers/char/scc.c | Outb(scc->ctrl, RES_EXT_INT); /* reset ext/status interrupts */ |
ctrl | 974 | drivers/char/scc.c | Outb(scc->ctrl, RES_Tx_P); /* just to be sure */ |
ctrl | 989 | drivers/char/scc.c | Outb(scc->ctrl,RES_EXT_INT); |
ctrl | 1073 | drivers/char/scc.c | status = InReg(scc->ctrl,R1); /* read receiver status */ |
ctrl | 1108 | drivers/char/scc.c | Outb(scc->ctrl,ERR_RES); |
ctrl | 1145 | drivers/char/scc.c | OutReg(scc->ctrl, R14, SSBR|scc->wreg[R14]); /* DPLL source = BRG */ |
ctrl | 1146 | drivers/char/scc.c | OutReg(scc->ctrl, R14, SNRZI|scc->wreg[R14]); /* DPLL NRZI mode */ |
ctrl | 1255 | drivers/char/scc.c | OutReg(scc->ctrl, R14, DISDPLL); |
ctrl | 1268 | drivers/char/scc.c | if((InReg(scc->ctrl,R0)) & DCD) /* DCD is now ON */ |
ctrl | 1279 | drivers/char/scc.c | Outb(scc->ctrl,RES_EXT_INT); /* reset ext/status interrupts */ |
ctrl | 1280 | drivers/char/scc.c | Outb(scc->ctrl,RES_EXT_INT); /* must be done twice */ |
ctrl | 1284 | drivers/char/scc.c | scc->status = InReg(scc->ctrl,R0); /* read initial status */ |
ctrl | 1313 | drivers/char/scc.c | Outb(scc->ctrl + 4, scc->option | (tx? 0x80 : 0)); |
ctrl | 1887 | drivers/char/scc.c | if (!scc->ctrl) continue; |
ctrl | 1904 | drivers/char/scc.c | Outb(scc->ctrl, 0); |
ctrl | 1905 | drivers/char/scc.c | OutReg(scc->ctrl,R9,FHWRES); /* force hardware reset */ |
ctrl | 2033 | drivers/char/scc.c | Outb(scc->ctrl,0); /* Make sure pointer is written */ |
ctrl | 2146 | drivers/char/scc.c | check_region(scc->ctrl, 1); |
ctrl | 2160 | drivers/char/scc.c | SCC_Info[2*Nchips ].ctrl = hwcfg.ctrl_a; |
ctrl | 2162 | drivers/char/scc.c | SCC_Info[2*Nchips+1].ctrl = hwcfg.ctrl_b; |
ctrl | 2181 | drivers/char/scc.c | SCC_Info[2*Nchips+chan].ctrl); |
ctrl | 2193 | drivers/char/scc.c | request_region(SCC_Info[2*Nchips+chan].ctrl, 1, "scc ctrl"); |
ctrl | 2284 | drivers/char/scc.c | | ((InReg(scc->ctrl,R0) & DCD) ? TIOCM_CAR : 0) |
ctrl | 2285 | drivers/char/scc.c | | ((InReg(scc->ctrl,R0) & CTS) ? TIOCM_CTS : 0); |
ctrl | 2756 | drivers/char/scc.c | io_port ctrl; |
ctrl | 2769 | drivers/char/scc.c | if ( (ctrl = SCC_ctrl[k*2]) ) |
ctrl | 2771 | drivers/char/scc.c | Outb(ctrl, 0); |
ctrl | 2772 | drivers/char/scc.c | OutReg(ctrl,R9,FHWRES); /* force hardware reset */ |
ctrl | 2781 | drivers/char/scc.c | release_region(scc->ctrl, 1); |
ctrl | 880 | drivers/net/bsd_comp.c | int ctrl; |
ctrl | 898 | drivers/net/bsd_comp.c | ctrl = PPP_CONTROL (ibuf); |
ctrl | 930 | drivers/net/bsd_comp.c | *wptr++ = ctrl; |
ctrl | 1516 | drivers/net/ppp.c | int addr, ctrl, proto; |
ctrl | 1565 | drivers/net/ppp.c | ctrl = PPP_UI; |
ctrl | 1586 | drivers/net/ppp.c | *(--data) = ctrl; |
ctrl | 96 | drivers/net/slip.c | struct slip ctrl; /* SLIP things */ |
ctrl | 130 | drivers/net/slip.c | if (!set_bit(SLF_INUSE, &slp->ctrl.flags)) |
ctrl | 146 | drivers/net/slip.c | set_bit(SLF_INUSE, &slp->ctrl.flags); |
ctrl | 147 | drivers/net/slip.c | slp->ctrl.tty = NULL; |
ctrl | 151 | drivers/net/slip.c | slp->dev.priv = (void*)&(slp->ctrl); |
ctrl | 165 | drivers/net/slip.c | set_bit(SLF_INUSE, &slp->ctrl.flags); |
ctrl | 166 | drivers/net/slip.c | slp->ctrl.dev = &(slp->dev); |
ctrl | 167 | drivers/net/slip.c | slp->dev.priv = (void*)&(slp->ctrl); |
ctrl | 172 | drivers/net/slip.c | return (&(slp->ctrl)); |
ctrl | 175 | drivers/net/slip.c | clear_bit(SLF_INUSE,&(slp->ctrl.flags)); |
ctrl | 56 | drivers/sound/pas2_midi.c | unsigned char ctrl; |
ctrl | 81 | drivers/sound/pas2_midi.c | ctrl = 0; |
ctrl | 87 | drivers/sound/pas2_midi.c | ctrl |= M_C_ENA_INPUT_IRQ; /* |
ctrl | 95 | drivers/sound/pas2_midi.c | ctrl |= M_C_ENA_OUTPUT_IRQ | /* |
ctrl | 101 | drivers/sound/pas2_midi.c | pas_write (ctrl, |
ctrl | 278 | drivers/sound/sscape.c | set_control (struct sscape_info *devc, int ctrl, int value) |
ctrl | 281 | drivers/sound/sscape.c | host_command3 (devc, CMD_SET_CONTROL, ctrl, value); |
ctrl | 284 | drivers/sound/sscape.c | printk ("SNDSCAPE: Setting control (%d) failed\n", ctrl); |
ctrl | 347 | include/linux/cdk.h | unsigned long ctrl; |
ctrl | 449 | include/linux/cdk.h | cdkctrl_t ctrl; |
ctrl | 239 | include/linux/scc.h | io_port ctrl; /* I/O address of CONTROL register */ |